[people/ms/u-boot.git] / include / configs / cgtqmx6eval.h

/*
 *
 * Congatec Conga-QEVAl board configuration file.
 *
 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
 * Based on Freescale i.MX6Q Sabre Lite board configuration file.
 * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
 * Leo Sartre, <lsartre@adeneo-embedded.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_CGTQMX6EVAL_H
#define __CONFIG_CGTQMX6EVAL_H

#include "mx6_common.h"

#define CONFIG_MACH_TYPE	4122

#ifdef CONFIG_SPL
#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
#define CONFIG_SPL_SPI_LOAD
#include "imx6_spl.h"
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

#define CONFIG_MISC_INIT_R

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

/* SPI NOR */
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SPI_FLASH_SST
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_SPEED		20000000
#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)

/* Thermal support */
#define CONFIG_IMX_THERMAL

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_SPEED		  100000

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */

#define CONFIG_USBD_HS

#define CONFIG_USB_FUNCTION_MASS_STORAGE

/* Framebuffer */
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#ifdef CONFIG_MX6DL
#define CONFIG_IPUV3_CLK 198000000
#else
#define CONFIG_IPUV3_CLK 264000000
#endif
#define CONFIG_IMX_HDMI

/* SATA */
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA

/* Ethernet */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		6
#define CONFIG_PHY_ATHEROS

/* Command definition */

#define CONFIG_MXC_UART_BASE	UART2_BASE
#define CONSOLE_DEV	"ttymxc1"
#define CONFIG_MMCROOT		"/dev/mmcblk0p2"
#define CONFIG_SYS_MMC_ENV_DEV		0

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"fdtfile=undefined\0" \
	"fdt_addr_r=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"console=" CONSOLE_DEV "\0" \
	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
	"dfu_alt_info_spl=spl raw 0x400\0" \
	"dfu_alt_info_img=u-boot raw 0x10000\0" \
	"dfu_alt_info=spl raw 0x400\0" \
	"bootm_size=0x10000000\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr_r}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"findfdt="\
		"if test $board_rev = MX6Q ; then " \
			"setenv fdtfile imx6q-qmx6.dtb; fi; " \
		"if test $board_rev = MX6DL ; then " \
			"setenv fdtfile imx6dl-qmx6.dtb; fi; " \
		"if test $fdtfile = undefined; then " \
			"echo WARNING: Could not determine dtb to use; fi; \0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
				"bootz ${loadaddr} - ${fdt_addr_r}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\

#define CONFIG_BOOTCOMMAND \
	"run spilock;"	    \
	"run findfdt; "	\
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
		"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run mmcboot; " \
			"else run netboot; " \
			"fi; " \
		"fi; " \
	"else run netboot; fi"

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	       1
#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#if defined (CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#endif

#define CONFIG_ENV_SIZE			(8 * 1024)

#if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#endif

#endif			       /* __CONFIG_CGTQMX6EVAL_H */
Commit	Line	Data
9b75bad0 SL	1	/*
	2	*
	3	* Congatec Conga-QEVAl board configuration file.
	4	*
	5	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	6	* Based on Freescale i.MX6Q Sabre Lite board configuration file.
	7	* Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
	8	* Leo Sartre, <lsartre@adeneo-embedded.com>
	9	*
1a459660	10	* SPDX-License-Identifier: GPL-2.0+
9b75bad0 SL	11	*/
	12
	13	#ifndef __CONFIG_CGTQMX6EVAL_H
	14	#define __CONFIG_CGTQMX6EVAL_H
	15
9b75bad0 SL	16	#include "mx6_common.h"
9b75bad0 SL	17
9b75bad0 SL	18	#define CONFIG_MACH_TYPE 4122
9b75bad0 SL	19
d7140351	20	#ifdef CONFIG_SPL
d7140351 OS	21	#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
	22	#define CONFIG_SPL_SPI_LOAD
	23	#include "imx6_spl.h"
	24	#endif
	25
9b75bad0 SL	26	/* Size of malloc() pool */
	27	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	28
9b75bad0	29	#define CONFIG_MISC_INIT_R
9b75bad0 SL	30
	31	#define CONFIG_MXC_UART
	32	#define CONFIG_MXC_UART_BASE UART2_BASE
	33
	34	/* MMC Configs */
9b75bad0 SL	35	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
9b75bad0 SL	36
71bcdafe	37	/* SPI NOR */
71bcdafe OS	38	#define CONFIG_SPI_FLASH
	39	#define CONFIG_SPI_FLASH_STMICRO
	40	#define CONFIG_SPI_FLASH_SST
	41	#define CONFIG_MXC_SPI
	42	#define CONFIG_SF_DEFAULT_BUS 0
	43	#define CONFIG_SF_DEFAULT_SPEED 20000000
	44	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	45
862187b7	46	/* Thermal support */
1368f993	47	#define CONFIG_IMX_THERMAL
862187b7	48
4c9929d6	49	/* I2C Configs */
4c9929d6 OS	50	#define CONFIG_SYS_I2C
4c9929d6 OS	51	#define CONFIG_SYS_I2C_MXC
03544c66 AA	52	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	53	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
4c9929d6 OS	54	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	55	#define CONFIG_SYS_I2C_SPEED 100000
	56
	57	/* PMIC */
	58	#define CONFIG_POWER
	59	#define CONFIG_POWER_I2C
	60	#define CONFIG_POWER_PFUZE100
	61	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
	62
95246ac7	63	/* USB Configs */
95246ac7	64	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
95246ac7 OS	65	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	66	#define CONFIG_MXC_USB_FLAGS 0
	67	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
95246ac7	68
3e08e1b7	69	#define CONFIG_USBD_HS
3e08e1b7	70
3e08e1b7	71	#define CONFIG_USB_FUNCTION_MASS_STORAGE
3e08e1b7	72
6d551f27	73	/* Framebuffer */
6d551f27	74	#define CONFIG_VIDEO_IPUV3
6d551f27 OS	75	#define CONFIG_VIDEO_BMP_RLE8
	76	#define CONFIG_SPLASH_SCREEN
	77	#define CONFIG_SPLASH_SCREEN_ALIGN
	78	#define CONFIG_BMP_16BPP
	79	#define CONFIG_VIDEO_LOGO
	80	#define CONFIG_VIDEO_BMP_LOGO
	81	#ifdef CONFIG_MX6DL
	82	#define CONFIG_IPUV3_CLK 198000000
	83	#else
	84	#define CONFIG_IPUV3_CLK 264000000
	85	#endif
	86	#define CONFIG_IMX_HDMI
	87
6731bc8d	88	/* SATA */
6731bc8d OS	89	#define CONFIG_DWC_AHSATA
	90	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	91	#define CONFIG_DWC_AHSATA_PORT_ID 0
	92	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	93	#define CONFIG_LBA48
	94	#define CONFIG_LIBATA
	95
f0222902	96	/* Ethernet */
f0222902 OS	97	#define CONFIG_FEC_MXC
	98	#define CONFIG_MII
	99	#define IMX_FEC_BASE ENET_BASE_ADDR
	100	#define CONFIG_FEC_XCV_TYPE RGMII
	101	#define CONFIG_ETHPRIME "FEC"
	102	#define CONFIG_FEC_MXC_PHYADDR 6
f0222902 OS	103	#define CONFIG_PHY_ATHEROS
f0222902 OS	104
5b94ce2c OS	105	/* Command definition */
	106
	107	#define CONFIG_MXC_UART_BASE UART2_BASE
12ca05a3	108	#define CONSOLE_DEV "ttymxc1"
5b94ce2c OS	109	#define CONFIG_MMCROOT "/dev/mmcblk0p2"
5b94ce2c OS	110	#define CONFIG_SYS_MMC_ENV_DEV 0
9b75bad0	111
d7140351	112	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
9b75bad0 SL	113	#define CONFIG_EXTRA_ENV_SETTINGS \
9b75bad0 SL	114	"script=boot.scr\0" \
4ac0c2bf	115	"image=zImage\0" \
d7140351	116	"fdtfile=undefined\0" \
5b94ce2c	117	"fdt_addr_r=0x18000000\0" \
9b75bad0	118	"boot_fdt=try\0" \
5b94ce2c	119	"ip_dyn=yes\0" \
12ca05a3	120	"console=" CONSOLE_DEV "\0" \
e0a352d1 OS	121	"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
	122	"dfu_alt_info_spl=spl raw 0x400\0" \
	123	"dfu_alt_info_img=u-boot raw 0x10000\0" \
	124	"dfu_alt_info=spl raw 0x400\0" \
5b94ce2c OS	125	"bootm_size=0x10000000\0" \
5b94ce2c OS	126	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
9b75bad0	127	"mmcpart=1\0" \
5b94ce2c OS	128	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	129	"update_sd_firmware=" \
	130	"if test ${ip_dyn} = yes; then " \
	131	"setenv get_cmd dhcp; " \
	132	"else " \
	133	"setenv get_cmd tftp; " \
	134	"fi; " \
	135	"if mmc dev ${mmcdev}; then " \
	136	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	137	"setexpr fw_sz ${filesize} / 0x200; " \
	138	"setexpr fw_sz ${fw_sz} + 1; " \
	139	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	140	"fi; " \
	141	"fi\0" \
9b75bad0 SL	142	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	143	"root=${mmcroot}\0" \
	144	"loadbootscript=" \
5b94ce2c	145	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
9b75bad0 SL	146	"bootscript=echo Running bootscript from mmc ...; " \
9b75bad0 SL	147	"source\0" \
5b94ce2c OS	148	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
5b94ce2c OS	149	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
9b75bad0 SL	150	"mmcboot=echo Booting from mmc ...; " \
	151	"run mmcargs; " \
	152	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	153	"if run loadfdt; then " \
5b94ce2c OS	154	"bootz ${loadaddr} - ${fdt_addr_r}; " \
	155	"else " \
	156	"if test ${boot_fdt} = try; then " \
	157	"bootz; " \
	158	"else " \
	159	"echo WARN: Cannot load the DT; " \
	160	"fi; " \
	161	"fi; " \
	162	"else " \
	163	"bootz; " \
	164	"fi;\0" \
d7140351 OS	165	"findfdt="\
	166	"if test $board_rev = MX6Q ; then " \
	167	"setenv fdtfile imx6q-qmx6.dtb; fi; " \
	168	"if test $board_rev = MX6DL ; then " \
	169	"setenv fdtfile imx6dl-qmx6.dtb; fi; " \
	170	"if test $fdtfile = undefined; then " \
	171	"echo WARNING: Could not determine dtb to use; fi; \0" \
5b94ce2c OS	172	"netargs=setenv bootargs console=${console},${baudrate} " \
	173	"root=/dev/nfs " \
	174	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	175	"netboot=echo Booting from net ...; " \
	176	"run netargs; " \
	177	"if test ${ip_dyn} = yes; then " \
	178	"setenv get_cmd dhcp; " \
	179	"else " \
	180	"setenv get_cmd tftp; " \
	181	"fi; " \
	182	"${get_cmd} ${image}; " \
	183	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	184	"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
	185	"bootz ${loadaddr} - ${fdt_addr_r}; " \
9b75bad0 SL	186	"else " \
9b75bad0 SL	187	"if test ${boot_fdt} = try; then " \
4ac0c2bf	188	"bootz; " \
9b75bad0 SL	189	"else " \
	190	"echo WARN: Cannot load the DT; " \
	191	"fi; " \
	192	"fi; " \
	193	"else " \
4ac0c2bf	194	"bootz; " \
5b94ce2c	195	"fi;\0" \
71bcdafe	196	"spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\
9b75bad0 SL	197
9b75bad0 SL	198	#define CONFIG_BOOTCOMMAND \
71bcdafe	199	"run spilock;" \
d7140351	200	"run findfdt; " \
5b94ce2c OS	201	"mmc dev ${mmcdev};" \
	202	"if mmc rescan; then " \
	203	"if run loadbootscript; then " \
	204	"run bootscript; " \
	205	"else " \
	206	"if run loadimage; then " \
	207	"run mmcboot; " \
	208	"else run netboot; " \
	209	"fi; " \
	210	"fi; " \
	211	"else run netboot; fi"
9b75bad0	212
9b75bad0 SL	213	#define CONFIG_SYS_MEMTEST_START 0x10000000
	214	#define CONFIG_SYS_MEMTEST_END 0x10010000
	215	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	216
9b75bad0 SL	217	/* Physical Memory Map */
	218	#define CONFIG_NR_DRAM_BANKS 1
	219	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
9b75bad0 SL	220
	221	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	222	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	223	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	224
	225	#define CONFIG_SYS_INIT_SP_OFFSET \
	226	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	227	#define CONFIG_SYS_INIT_SP_ADDR \
	228	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	229
056845c2	230	/* Environment organization */
d5de9108	231	#if defined (CONFIG_ENV_IS_IN_MMC)
9b75bad0 SL	232	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
9b75bad0 SL	233	#define CONFIG_SYS_MMC_ENV_DEV 0
d5de9108 OS	234	#endif
	235
	236	#define CONFIG_ENV_SIZE (8 * 1024)
	237
d5de9108 OS	238	#if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
	239	#define CONFIG_ENV_OFFSET (768 * 1024)
	240	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	241	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	242	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	243	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	244	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	245	#endif
9b75bad0	246
9b75bad0	247	#endif /* __CONFIG_CGTQMX6EVAL_H */