[people/ms/u-boot.git] / include / configs / cl-som-am57x.h

/*
 * Configuration settings for CompuLab CL-SOM-AM57x board
 *
 * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/
 *
 * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_CL_SOM_AM57X_H
#define __CONFIG_CL_SOM_AM57X_H

#define CONFIG_NR_DRAM_BANKS		2

#define CONSOLEDEV			"ttyO2"
#define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */
#define CONFIG_CONS_INDEX		3

#define CONFIG_SYS_OMAP_ABE_SYSCK

#include <configs/ti_omap5_common.h>

/* misc */
#define CONFIG_MISC_INIT_R
#define CONFIG_REVISION_TAG

/* PMIC I2C bus number */
#define CONFIG_SYS_SPD_BUS_NUM 3

/* SPI Flash support */
#undef  CONFIG_OMAP3_SPI

#define CONFIG_TI_SPI_MMAP
#define CONFIG_SF_DEFAULT_SPEED		48000000
#define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_3

/* SPI SPL defines */
/* Offsets: 0K - SPL1, 64K - SPL2, 128K - SPL3, 192K - SPL4, 256K - U-Boot */
#define CONFIG_SYS_SPI_U_BOOT_OFFS	(256 * 1024)
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD

/* SD/MMC RAW boot */
#undef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
#undef CONFIG_SYS_MMCSD_FS_BOOT_PARTITION

/* Environment */
#define CONFIG_ENV_SIZE			(16 << 10) /* 16 KiB env size */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SPI_MAX_HZ		48000000

/* EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
#define CONFIG_SYS_I2C_EEPROM_BUS       3

#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_EEPROM_SIZE		256

#ifndef CONFIG_SPL_BUILD
/* SATA */
#define CONFIG_CMD_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
						CONFIG_SYS_SCSI_MAX_LUN)
/* PCA9555 GPIO expander support */
#define CONFIG_PCA953X
#define CONFIG_CMD_PCA953X
#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_SYS_I2C_PCA953X_ADDR     0x20
#define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x20, 16} }

#endif /* !CONFIG_SPL_BUILD */

/* USB xHCI HOST */
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2

#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB3PHY1_HOST

/* USB Networking options */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_ETHER_RNDIS
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830

/* CPSW Ethernet */
#define CONFIG_DRIVER_TI_CPSW
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_PHY_GIGE
#define CONFIG_PHY_ATHEROS
#define CONFIG_PHYLIB
#define CONFIG_SYS_RX_ETH_BUFFER	64
#define PHY_ANEG_TIMEOUT		8000

#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT		10

/* Default environment */
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
	DEFAULT_LINUX_BOOT_ENV \
	"autoload=no\0" \
	"baudrate=115200\0" \
	"console=ttyO2,115200n8\0" \
	"bootdelay=3\0" \
	"fdtfile=am57xx-sbc-am57x.dtb\0" \
	"kernel=zImage-cl-som-am57x\0" \
	"bootscr=bootscr.img\0" \
	"displaytype=hdmi\0" \
	"bootkernel=bootz ${loadaddr} - ${fdtaddr}\0" \
	"mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
	"mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
	"load_mmc=mmc dev ${mmcdev} && mmc rescan && " \
		"run mmcloadkernel run mmcloadfdt\0" \
	"mmcroot=/dev/mmcblk1p2\0" \
	"mmcrootfstype=ext4 rw rootwait\0" \
	"mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
		"rootfstype=${mmcrootfstype}\0" \
	"mmcbootscript=setenv mmcdev 0; mmc dev ${mmcdev} && mmc rescan && " \
		"load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \
		"echo Running bootscript from MMC/SD Card ... && " \
		"source ${loadaddr}\0" \
	"mmcboot=setenv mmcdev 0 && run load_mmc && " \
		"run mmcargs && echo Booting from MMC/SD Card ... && " \
		"run bootkernel\0" \
	"emmcroot=/dev/mmcblk0p2\0" \
	"emmcrootfstype=ext4 rw rootwait\0" \
	"emmcargs=setenv bootargs console=${console} " \
		"root=${emmcroot} " \
		"rootfstype=${emmcrootfstype}\0" \
	"emmcbootscript=setenv mmcdev 1; mmc dev ${mmcdev} && mmc rescan && " \
		"load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \
		"echo Running bootscript from eMMC ... && " \
		"source ${loadaddr}\0" \
	"emmcboot=setenv mmcdev 1 && run load_mmc && " \
		"run emmcargs && echo Booting from eMMC ... && " \
		"run bootkernel\0" \
	"sataroot=/dev/sda2\0" \
	"satarootfstype=ext4 rw rootwait\0" \
	"load_sata=load scsi 0 ${loadaddr} ${kernel} && " \
		"load scsi 0 ${fdtaddr} ${fdtfile}\0" \
	"sataargs=setenv bootargs console=${console} " \
		"root=${sataroot} " \
		"rootfstype=${satarootfstype}\0" \
	"satabootscript=load scsi 0 ${loadaddr} ${bootscr} && " \
		"echo Running bootscript from SATA ... && " \
		"source ${loadaddr}\0" \
	"sataboot=run load_sata && run sataargs && " \
		"echo Booting from SATA ... && " \
		"run bootkernel\0" \

#undef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND \
	"run mmcbootscript || run mmcboot || " \
	"run satabootscript || run sataboot || " \
	"run emmcbootscript || run emmcboot"


#endif /* __CONFIG_CL_SOM_AM57X_H */
Commit	Line	Data
46650d58 DL	1	/*
	2	* Configuration settings for CompuLab CL-SOM-AM57x board
	3	*
	4	* (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/
	5	*
	6	* Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
	7	*
	8	* SPDX-License-Identifier: GPL-2.0+
	9	*/
	10
	11	#ifndef __CONFIG_CL_SOM_AM57X_H
	12	#define __CONFIG_CL_SOM_AM57X_H
	13
46650d58 DL	14	#define CONFIG_NR_DRAM_BANKS 2
	15
	16	#define CONSOLEDEV "ttyO2"
	17	#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
	18	#define CONFIG_CONS_INDEX 3
46650d58 DL	19
	20	#define CONFIG_SYS_OMAP_ABE_SYSCK
	21
	22	#include <configs/ti_omap5_common.h>
	23
965c509f DL	24	/* misc */
	25	#define CONFIG_MISC_INIT_R
	26	#define CONFIG_REVISION_TAG
	27
46650d58 DL	28	/* PMIC I2C bus number */
	29	#define CONFIG_SYS_SPD_BUS_NUM 3
	30
	31	/* SPI Flash support */
	32	#undef CONFIG_OMAP3_SPI
	33
	34	#define CONFIG_TI_SPI_MMAP
	35	#define CONFIG_SF_DEFAULT_SPEED 48000000
	36	#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
	37
	38	/* SPI SPL defines */
	39	/* Offsets: 0K - SPL1, 64K - SPL2, 128K - SPL3, 192K - SPL4, 256K - U-Boot */
	40	#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)
	41	#define CONFIG_SPL_SPI_SUPPORT
	42	#define CONFIG_SPL_SPI_FLASH_SUPPORT
	43	#define CONFIG_SPL_SPI_LOAD
	44
	45	/* SD/MMC RAW boot */
	46	#undef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
	47	#undef CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
	48
	49	/* Environment */
	50	#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB env size */
	51	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	52
	53	#define CONFIG_ENV_IS_IN_SPI_FLASH
	54	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	55	#define CONFIG_ENV_OFFSET (768 * 1024)
	56	#define CONFIG_ENV_SPI_MAX_HZ 48000000
	57
965c509f DL	58	/* EEPROM */
	59	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	60	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	61	#define CONFIG_SYS_I2C_EEPROM_BUS 3
	62
965c509f DL	63	#define CONFIG_ENV_EEPROM_IS_ON_I2C
	64	#define CONFIG_SYS_EEPROM_SIZE 256
	65
46650d58 DL	66	#ifndef CONFIG_SPL_BUILD
	67	/* SATA */
	68	#define CONFIG_CMD_SCSI
	69	#define CONFIG_LIBATA
	70	#define CONFIG_SCSI_AHCI
	71	#define CONFIG_SCSI_AHCI_PLAT
	72	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
	73	#define CONFIG_SYS_SCSI_MAX_LUN 1
	74	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	75	CONFIG_SYS_SCSI_MAX_LUN)
	76	/* PCA9555 GPIO expander support */
	77	#define CONFIG_PCA953X
	78	#define CONFIG_CMD_PCA953X
	79	#define CONFIG_CMD_PCA953X_INFO
	80	#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20
	81	#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} }
	82
e627290a UM	83	#endif /* !CONFIG_SPL_BUILD */
e627290a UM	84
46650d58 DL	85	/* USB xHCI HOST */
	86	#define CONFIG_USB_XHCI_OMAP
	87	#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
	88
	89	#define CONFIG_OMAP_USB_PHY
	90	#define CONFIG_OMAP_USB3PHY1_HOST
	91
	92	/* USB Networking options */
	93	#define CONFIG_USB_HOST_ETHER
	94	#define CONFIG_USB_ETHER_SMSC95XX
	95	#define CONFIG_USB_ETHER_RNDIS
	96	#define CONFIG_USB_ETHER_ASIX
	97	#define CONFIG_USB_ETHER_MCS7830
	98
fc300e2c DL	99	/* CPSW Ethernet */
	100	#define CONFIG_DRIVER_TI_CPSW
	101	#define CONFIG_MII
	102	#define CONFIG_BOOTP_DEFAULT
	103	#define CONFIG_BOOTP_SEND_HOSTNAME
	104	#define CONFIG_BOOTP_GATEWAY
	105	#define CONFIG_PHY_GIGE
	106	#define CONFIG_PHY_ATHEROS
	107	#define CONFIG_PHYLIB
	108	#define CONFIG_SYS_RX_ETH_BUFFER 64
	109	#define PHY_ANEG_TIMEOUT 8000
	110
	111	#define CONFIG_BOOTP_DNS
	112	#define CONFIG_BOOTP_DNS2
	113	#define CONFIG_BOOTP_SUBNETMASK
	114	#define CONFIG_NET_RETRY_COUNT 10
	115
99b02b4d UM	116	/* Default environment */
	117	#undef CONFIG_EXTRA_ENV_SETTINGS
	118	#define CONFIG_EXTRA_ENV_SETTINGS \
	119	DEFAULT_LINUX_BOOT_ENV \
	120	"autoload=no\0" \
	121	"baudrate=115200\0" \
	122	"console=ttyO2,115200n8\0" \
	123	"bootdelay=3\0" \
	124	"fdtfile=am57xx-sbc-am57x.dtb\0" \
	125	"kernel=zImage-cl-som-am57x\0" \
	126	"bootscr=bootscr.img\0" \
	127	"displaytype=hdmi\0" \
	128	"bootkernel=bootz ${loadaddr} - ${fdtaddr}\0" \
	129	"mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
	130	"mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
	131	"load_mmc=mmc dev ${mmcdev} && mmc rescan && " \
	132	"run mmcloadkernel run mmcloadfdt\0" \
	133	"mmcroot=/dev/mmcblk1p2\0" \
	134	"mmcrootfstype=ext4 rw rootwait\0" \
	135	"mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
	136	"rootfstype=${mmcrootfstype}\0" \
	137	"mmcbootscript=setenv mmcdev 0; mmc dev ${mmcdev} && mmc rescan && " \
	138	"load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \
	139	"echo Running bootscript from MMC/SD Card ... && " \
	140	"source ${loadaddr}\0" \
	141	"mmcboot=setenv mmcdev 0 && run load_mmc && " \
	142	"run mmcargs && echo Booting from MMC/SD Card ... && " \
	143	"run bootkernel\0" \
	144	"emmcroot=/dev/mmcblk0p2\0" \
	145	"emmcrootfstype=ext4 rw rootwait\0" \
	146	"emmcargs=setenv bootargs console=${console} " \
	147	"root=${emmcroot} " \
	148	"rootfstype=${emmcrootfstype}\0" \
	149	"emmcbootscript=setenv mmcdev 1; mmc dev ${mmcdev} && mmc rescan && " \
	150	"load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \
	151	"echo Running bootscript from eMMC ... && " \
	152	"source ${loadaddr}\0" \
	153	"emmcboot=setenv mmcdev 1 && run load_mmc && " \
	154	"run emmcargs && echo Booting from eMMC ... && " \
	155	"run bootkernel\0" \
	156	"sataroot=/dev/sda2\0" \
	157	"satarootfstype=ext4 rw rootwait\0" \
	158	"load_sata=load scsi 0 ${loadaddr} ${kernel} && " \
	159	"load scsi 0 ${fdtaddr} ${fdtfile}\0" \
	160	"sataargs=setenv bootargs console=${console} " \
	161	"root=${sataroot} " \
	162	"rootfstype=${satarootfstype}\0" \
	163	"satabootscript=load scsi 0 ${loadaddr} ${bootscr} && " \
	164	"echo Running bootscript from SATA ... && " \
	165	"source ${loadaddr}\0" \
	166	"sataboot=run load_sata && run sataargs && " \
	167	"echo Booting from SATA ... && " \
	168	"run bootkernel\0" \
	169
	170	#undef CONFIG_BOOTCOMMAND
	171	#define CONFIG_BOOTCOMMAND \
	172	"run mmcbootscript \|\| run mmcboot \|\| " \
	173	"run satabootscript \|\| run sataboot \|\| " \
	174	"run emmcbootscript \|\| run emmcboot"
	175
	176
46650d58	177	#endif /* __CONFIG_CL_SOM_AM57X_H */