[people/ms/u-boot.git] / include / configs / cm-bf548.h

/*
 * U-boot - Configuration file for cm-bf548 board
 */

#ifndef __CONFIG_CM_BF548_H__
#define __CONFIG_CM_BF548_H__

#include <asm/config-pre.h>


/*
 * Processor Settings
 */
#define CONFIG_BFIN_CPU             bf548-0.0
#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA


/*
 * Clock Settings
 *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
 *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
 */
/* CONFIG_CLKIN_HZ is any value in Hz					*/
#define CONFIG_CLKIN_HZ			25000000
/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
/*                                                1 = CLKIN / 2		*/
#define CONFIG_CLKIN_HALF		0
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
/*                                                1 = bypass PLL	*/
#define CONFIG_PLL_BYPASS		0
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
/* Values can range from 0-63 (where 0 means 64)			*/
#define CONFIG_VCO_MULT			21
/* CCLK_DIV controls the core clock divider				*/
/* Values can be 1, 2, 4, or 8 ONLY					*/
#define CONFIG_CCLK_DIV			1
/* SCLK_DIV controls the system clock divider				*/
/* Values can range from 1-15						*/
#define CONFIG_SCLK_DIV			4

/* Decrease core voltage */
#define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000)


/*
 * Memory Settings
 */
#define CONFIG_MEM_ADD_WDTH	10
#define CONFIG_MEM_SIZE		64

#define CONFIG_EBIU_DDRCTL0_VAL	0x218A83FE
#define CONFIG_EBIU_DDRCTL1_VAL	0x20022222
#define CONFIG_EBIU_DDRCTL2_VAL	0x00000021

/* Default bank mapping:
 *	Async Bank 0 - 32MB Burst Flash
 *	Async Bank 1 - Ethernet
 *	Async Bank 2 - Nothing
 *	Async Bank 3 - Nothing
 */
#define CONFIG_EBIU_AMGCTL_VAL	0xFF
#define CONFIG_EBIU_AMBCTL0_VAL	0x7BB07BB0
#define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0
#define CONFIG_EBIU_FCTL_VAL	(BCLK_4)
#define CONFIG_EBIU_MODE_VAL	(B0MODE_FLASH)

#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)
#define CONFIG_SYS_MALLOC_LEN	(640 * 1024)


/*
 * Network Settings
 */
#define ADI_CMDS_NETWORK	1
#define CONFIG_SMC911X	1
#define CONFIG_SMC911X_BASE	0x24000000
#define CONFIG_SMC911X_16_BIT
#define CONFIG_HOSTNAME		cm-bf548
/* Uncomment next line to use fixed MAC address */
/* #define CONFIG_ETHADDR	02:80:ad:24:31:91 */


/*
 * Flash Settings
 */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_BASE		0x20000000
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	259


/*
 * Env Storage Settings
 */
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_ADDR		0x20008000
#define CONFIG_ENV_OFFSET	0x8000
#define CONFIG_ENV_SIZE		0x8000
#define CONFIG_ENV_IS_EMBEDDED_IN_LDR


/*
 * I2C Settings
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_ADI


/*
 * Misc Settings
 */
#define CONFIG_BAUDRATE		115200
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE	1
#define CONFIG_BOOTCOMMAND	"run flashboot"
#define FLASHBOOT_ENV_SETTINGS	"flashboot=bootm 0x20040000\0"

#define CONFIG_ADI_GPIO2

#ifndef __ADSPBF542__
/* Don't waste time transferring a logo over the UART */
# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
#  define CONFIG_VIDEO
#  define EASYLOGO_HEADER <asm/bfin_logo_230x230_gzip.h>
# endif
# define CONFIG_DEB_DMA_URGENT
#endif

/* Define if want to do post memory test */
#undef CONFIG_POST
#ifdef CONFIG_POST
#define FLASH_START_POST_BLOCK 11       /* Should > = 11 */
#define FLASH_END_POST_BLOCK   71       /* Should < = 71 */
#endif


/*
 * Pull in common ADI header for remaining command/environment setup
 */
#include <configs/bfin_adi_common.h>

#endif
Commit	Line	Data
8b219cf0 MF	1	/*
	2	* U-boot - Configuration file for cm-bf548 board
	3	*/
	4
	5	#ifndef __CONFIG_CM_BF548_H__
	6	#define __CONFIG_CM_BF548_H__
	7
f348ab85	8	#include <asm/config-pre.h>
8b219cf0 MF	9
	10
	11	/*
	12	* Processor Settings
	13	*/
fbcf8e8c	14	#define CONFIG_BFIN_CPU bf548-0.0
8b219cf0 MF	15	#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
	16
	17
	18	/*
	19	* Clock Settings
	20	* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
	21	* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
	22	*/
	23	/* CONFIG_CLKIN_HZ is any value in Hz */
	24	#define CONFIG_CLKIN_HZ 25000000
	25	/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
	26	/* 1 = CLKIN / 2 */
	27	#define CONFIG_CLKIN_HALF 0
	28	/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
	29	/* 1 = bypass PLL */
	30	#define CONFIG_PLL_BYPASS 0
	31	/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
	32	/* Values can range from 0-63 (where 0 means 64) */
	33	#define CONFIG_VCO_MULT 21
	34	/* CCLK_DIV controls the core clock divider */
	35	/* Values can be 1, 2, 4, or 8 ONLY */
	36	#define CONFIG_CCLK_DIV 1
	37	/* SCLK_DIV controls the system clock divider */
	38	/* Values can range from 1-15 */
	39	#define CONFIG_SCLK_DIV 4
	40
fd04a05b HK	41	/* Decrease core voltage */
	42	#define CONFIG_VR_CTL_VAL (VLEV_115 \| GAIN_20 \| FREQ_1000)
	43
8b219cf0 MF	44
	45	/*
	46	* Memory Settings
	47	*/
	48	#define CONFIG_MEM_ADD_WDTH 10
	49	#define CONFIG_MEM_SIZE 64
	50
	51	#define CONFIG_EBIU_DDRCTL0_VAL 0x218A83FE
	52	#define CONFIG_EBIU_DDRCTL1_VAL 0x20022222
	53	#define CONFIG_EBIU_DDRCTL2_VAL 0x00000021
	54
	55	/* Default bank mapping:
	56	* Async Bank 0 - 32MB Burst Flash
	57	* Async Bank 1 - Ethernet
	58	* Async Bank 2 - Nothing
	59	* Async Bank 3 - Nothing
	60	*/
	61	#define CONFIG_EBIU_AMGCTL_VAL 0xFF
	62	#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
	63	#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
	64	#define CONFIG_EBIU_FCTL_VAL (BCLK_4)
	65	#define CONFIG_EBIU_MODE_VAL (B0MODE_FLASH)
	66
98ae6070	67	#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
8b219cf0 MF	68	#define CONFIG_SYS_MALLOC_LEN (640 * 1024)
	69
	70
	71	/*
	72	* Network Settings
	73	*/
	74	#define ADI_CMDS_NETWORK 1
736fead8 BW	75	#define CONFIG_SMC911X 1
	76	#define CONFIG_SMC911X_BASE 0x24000000
	77	#define CONFIG_SMC911X_16_BIT
8b219cf0 MF	78	#define CONFIG_HOSTNAME cm-bf548
	79	/* Uncomment next line to use fixed MAC address */
	80	/* #define CONFIG_ETHADDR 02:80:ad:24:31:91 */
	81
	82
	83	/*
	84	* Flash Settings
	85	*/
	86	#define CONFIG_FLASH_CFI_DRIVER
	87	#define CONFIG_SYS_FLASH_BASE 0x20000000
	88	#define CONFIG_SYS_FLASH_CFI
	89	#define CONFIG_SYS_FLASH_PROTECTION
	90	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	91	#define CONFIG_SYS_MAX_FLASH_SECT 259
	92
	93
	94	/*
	95	* Env Storage Settings
	96	*/
	97	#define CONFIG_ENV_IS_IN_FLASH 1
	98	#define CONFIG_ENV_ADDR 0x20008000
	99	#define CONFIG_ENV_OFFSET 0x8000
	100	#define CONFIG_ENV_SIZE 0x8000
76d82187	101	#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
8b219cf0 MF	102
	103
	104	/*
	105	* I2C Settings
	106	*/
c469703b	107	#define CONFIG_SYS_I2C
fea9b69a	108	#define CONFIG_SYS_I2C_ADI
8b219cf0 MF	109
	110
	111	/*
	112	* Misc Settings
	113	*/
	114	#define CONFIG_BAUDRATE 115200
	115	#define CONFIG_BOARD_EARLY_INIT_F
	116	#define CONFIG_RTC_BFIN
	117	#define CONFIG_UART_CONSOLE 1
fd04a05b HK	118	#define CONFIG_BOOTCOMMAND "run flashboot"
fd04a05b HK	119	#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0"
8b219cf0	120
e45eb6b9 SZ	121	#define CONFIG_ADI_GPIO2
e45eb6b9 SZ	122
8b219cf0 MF	123	#ifndef __ADSPBF542__
	124	/* Don't waste time transferring a logo over the UART */
	125	# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
	126	# define CONFIG_VIDEO
42c6e9ad	127	# define EASYLOGO_HEADER <asm/bfin_logo_230x230_gzip.h>
8b219cf0 MF	128	# endif
	129	# define CONFIG_DEB_DMA_URGENT
	130	#endif
	131
	132	/* Define if want to do post memory test */
	133	#undef CONFIG_POST
	134	#ifdef CONFIG_POST
	135	#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */
	136	#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */
	137	#endif
	138
	139
	140	/*
	141	* Pull in common ADI header for remaining command/environment setup
	142	*/
	143	#include <configs/bfin_adi_common.h>
	144
8b219cf0	145	#endif