[people/ms/u-boot.git] / include / configs / colibri_imx6.h

/*
 * Copyright 2013-2015 Toradex, Inc.
 *
 * Configuration settings for the Toradex Colibri iMX6
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"

#undef CONFIG_DISPLAY_BOARDINFO
#define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */

#define CONFIG_SYS_GENERIC_BOARD

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

#ifdef CONFIG_SPL
#include "imx6_spl.h"
#define CONFIG_SPL_PAD_TO		0x11000 /* 4k IVT/DCD, 64k SPL */
#endif

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SERIAL_TAG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(32 * 1024 * 1024)

#define CONFIG_MISC_INIT_R

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART1_BASE

/* Make the HW version stuff available in U-Boot env */
#define CONFIG_VERSION_VARIABLE		/* ver environment variable */
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000

/* OCOTP Configs */
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	2

#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
#define CONFIG_BOUNCE_BUFFER

/* Network */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		1
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_IP_DEFRAG
#define CONFIG_TFTP_BLOCKSIZE		16352
#define CONFIG_TFTP_TSIZE

/* USB Configs */
/* Host */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_MAX_CONTROLLER_COUNT		2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
#define CONFIG_USB_KEYBOARD
#ifdef CONFIG_USB_KEYBOARD
#define CONFIG_SYS_USB_EVENT_POLL
#endif /* CONFIG_USB_KEYBOARD */
/* Client */
#define CONFIG_USB_GADGET_VBUS_DRAW	2
#define CONFIG_USBD_HS

#define CONFIG_USB_GADGET_MASS_STORAGE
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_G_DNL_MANUFACTURER	"Toradex"
/* USB DFU */
#define CONFIG_DFU_MMC

/* Miscellaneous commands */
#define CONFIG_MXC_GPIO

/* Framebuffer and LCD */
#define CONFIG_VIDEO_IPUV3
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK		260000000
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX		1

/* Command definition */
#undef CONFIG_CMD_LOADB
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_FLASH

#undef CONFIG_IPADDR
#define CONFIG_IPADDR			192.168.10.2
#define CONFIG_NETMASK			255.255.255.0
#undef CONFIG_SERVERIP
#define CONFIG_SERVERIP			192.168.10.1

#define CONFIG_LOADADDR			0x12000000
#define CONFIG_SYS_TEXT_BASE		0x17800000

#ifdef CONFIG_CMD_MMC
#define CONFIG_DRIVE_MMC "mmc "
#else
#define CONFIG_DRIVE_MMC
#endif

#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_MMC

#define DFU_ALT_EMMC_INFO \
	"u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
	"boot part 0 1;" \
	"rootfs part 0 2;" \
	"uImage fat 0 1;" \
	"imx6q-colibri-eval-v3.dtb fat 0 1;" \
	"imx6q-colibri-cam-eval-v3.dtb fat 0 1"

#define EMMC_BOOTCMD \
	"emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
		"rootwait\0" \
	"emmcboot=run setup; " \
		"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
		"${vidargs}; echo Booting from internal eMMC chip...; "	\
		"run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
		"${boot_file} && run fdt_fixup && " \
		"bootm ${kernel_addr_r} ${dtbparam}\0" \
	"emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
		"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"

#define MEM_LAYOUT_ENV_SETTINGS \
	"bootm_size=0x10000000\0" \
	"fdt_addr_r=0x12000000\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"kernel_addr_r=0x11000000\0" \
	"ramdisk_addr_r=0x12100000\0"

#define NFS_BOOTCMD \
	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
	"nfsboot=run setup; " \
		"setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
		"${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
		"run nfsdtbload; dhcp ${kernel_addr_r} " \
		"&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
	"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
		"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"

#define SD_BOOTCMD						\
	"sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
		"rootwait\0" \
	"sdboot=run setup; " \
		"setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
		"${vidargs}; echo Booting from SD card; " \
		"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
		"${boot_file} && run fdt_fixup && " \
		"bootm ${kernel_addr_r} ${dtbparam}\0" \
	"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
		"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"

#define USB_BOOTCMD \
	"usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
		"rootwait\0" \
	"usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
		"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
		"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
		"${boot_file} && run fdt_fixup && " \
		"bootm ${kernel_addr_r} ${dtbparam}\0" \
	"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
		"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"

#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
		"run nfsboot ; echo ; echo nfsboot failed ; " \
		"usb start ;" \
		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
	"boot_file=uImage\0" \
	"console=ttymxc0\0" \
	"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
	"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
	EMMC_BOOTCMD \
	"fdt_file=" FDT_FILE "\0" \
	"fdt_fixup=;\0" \
	MEM_LAYOUT_ENV_SETTINGS \
	NFS_BOOTCMD \
	SD_BOOTCMD \
	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
		"flash_eth.img && source ${loadaddr}\0" \
	"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
		"${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
		"source ${loadaddr}\0" \
	"setup=setenv setupargs fec_mac=${ethaddr} " \
		"consoleblank=0 no_console_suspend=1 console=tty1 " \
		"console=${console},${baudrate}n8\0 " \
	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
	"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
		"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
		"source ${loadaddr}\0" \
	"splashpos=m,m\0" \
	"vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
		"video=mxcfb1:off fbmem=8M\0 "

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE
#undef CONFIG_SYS_CBSIZE
#define CONFIG_SYS_CBSIZE		1024
#undef CONFIG_SYS_MAXARGS
#define CONFIG_SYS_MAXARGS		48

#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* environment organization */
#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_IS_IN_MMC

#if defined(CONFIG_ENV_IS_IN_MMC)
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
					 CONFIG_TDX_CFG_BLOCK_OFFSET)
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_SYS_MMC_ENV_PART		1
#endif

#define CONFIG_OF_SYSTEM_SETUP

#define CONFIG_CMD_TIME

#define CONFIG_SUPPORT_RAW_INITRD

#endif	/* __CONFIG_H */
Commit	Line	Data
a02d517b MK	1	/*
	2	* Copyright 2013-2015 Toradex, Inc.
	3	*
	4	* Configuration settings for the Toradex Colibri iMX6
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	#include "mx6_common.h"
a02d517b MK	13
	14	#undef CONFIG_DISPLAY_BOARDINFO
	15	#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
	16
	17	#define CONFIG_SYS_GENERIC_BOARD
	18
	19	#include <asm/arch/imx-regs.h>
	20	#include <asm/imx-common/gpio.h>
	21
	22	#ifdef CONFIG_SPL
	23	#include "imx6_spl.h"
	24	#define CONFIG_SPL_PAD_TO 0x11000 /* 4k IVT/DCD, 64k SPL */
	25	#endif
	26
	27	#define CONFIG_CMDLINE_TAG
	28	#define CONFIG_SETUP_MEMORY_TAGS
	29	#define CONFIG_INITRD_TAG
	30	#define CONFIG_REVISION_TAG
	31	#define CONFIG_SERIAL_TAG
	32
	33	/* Size of malloc() pool */
	34	#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
	35
a02d517b MK	36	#define CONFIG_MISC_INIT_R
	37
	38	#define CONFIG_MXC_UART
	39	#define CONFIG_MXC_UART_BASE UART1_BASE
	40
	41	/* Make the HW version stuff available in U-Boot env */
	42	#define CONFIG_VERSION_VARIABLE /* ver environment variable */
	43	#define CONFIG_ENV_VARS_UBOOT_CONFIG
	44	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	45
	46	/* I2C Configs */
	47	#define CONFIG_SYS_I2C
	48	#define CONFIG_SYS_I2C_MXC
	49	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	50	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	51	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	52	#define CONFIG_SYS_I2C_SPEED 100000
	53
	54	/* OCOTP Configs */
a02d517b MK	55	#ifdef CONFIG_CMD_FUSE
	56	#define CONFIG_MXC_OCOTP
	57	#endif
	58
	59	/* MMC Configs */
	60	#define CONFIG_FSL_ESDHC
	61	#define CONFIG_FSL_USDHC
	62	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	63	#define CONFIG_SYS_FSL_USDHC_NUM 2
	64
	65	#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
a02d517b	66	#define CONFIG_BOUNCE_BUFFER
a02d517b MK	67
	68	/* Network */
	69	#define CONFIG_FEC_MXC
	70	#define CONFIG_MII
	71	#define IMX_FEC_BASE ENET_BASE_ADDR
	72	#define CONFIG_FEC_XCV_TYPE RMII
	73	#define CONFIG_ETHPRIME "FEC"
	74	#define CONFIG_FEC_MXC_PHYADDR 1
	75	#define CONFIG_PHYLIB
	76	#define CONFIG_PHY_MICREL
	77	#define CONFIG_IP_DEFRAG
	78	#define CONFIG_TFTP_BLOCKSIZE 16352
	79	#define CONFIG_TFTP_TSIZE
	80
	81	/* USB Configs */
	82	/* Host */
	83	#define CONFIG_USB_HOST_ETHER
	84	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	85	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	86	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	87	#define CONFIG_MXC_USB_FLAGS 0
	88	#define CONFIG_USB_KEYBOARD
	89	#ifdef CONFIG_USB_KEYBOARD
	90	#define CONFIG_SYS_USB_EVENT_POLL
	91	#endif /* CONFIG_USB_KEYBOARD */
	92	/* Client */
	93	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	94	#define CONFIG_USBD_HS
	95
	96	#define CONFIG_USB_GADGET_MASS_STORAGE
	97	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	98	#define CONFIG_G_DNL_MANUFACTURER "Toradex"
	99	/* USB DFU */
	100	#define CONFIG_DFU_MMC
	101
	102	/* Miscellaneous commands */
a02d517b MK	103	#define CONFIG_MXC_GPIO
	104
	105	/* Framebuffer and LCD */
	106	#define CONFIG_VIDEO_IPUV3
	107	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	108	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	109	#define CONFIG_VIDEO_BMP_RLE8
	110	#define CONFIG_SPLASH_SCREEN
	111	#define CONFIG_SPLASH_SCREEN_ALIGN
	112	#define CONFIG_BMP_16BPP
	113	#define CONFIG_VIDEO_LOGO
	114	#define CONFIG_VIDEO_BMP_LOGO
	115	#define CONFIG_IPUV3_CLK 260000000
a02d517b MK	116	#define CONFIG_CONSOLE_MUX
	117	#define CONFIG_IMX_HDMI
	118	#define CONFIG_IMX_VIDEO_SKIP
a02d517b MK	119
	120	/* allow to overwrite serial and ethaddr */
	121	#define CONFIG_ENV_OVERWRITE
	122	#define CONFIG_CONS_INDEX 1
a02d517b MK	123
	124	/* Command definition */
	125	#undef CONFIG_CMD_LOADB
	126	#undef CONFIG_CMD_LOADS
	127	#undef CONFIG_CMD_NFS
	128	#undef CONFIG_CMD_FLASH
	129
	130	#undef CONFIG_IPADDR
	131	#define CONFIG_IPADDR 192.168.10.2
	132	#define CONFIG_NETMASK 255.255.255.0
	133	#undef CONFIG_SERVERIP
	134	#define CONFIG_SERVERIP 192.168.10.1
	135
	136	#define CONFIG_LOADADDR 0x12000000
	137	#define CONFIG_SYS_TEXT_BASE 0x17800000
	138
	139	#ifdef CONFIG_CMD_MMC
	140	#define CONFIG_DRIVE_MMC "mmc "
	141	#else
	142	#define CONFIG_DRIVE_MMC
	143	#endif
	144
	145	#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_MMC
	146
	147	#define DFU_ALT_EMMC_INFO \
	148	"u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
	149	"boot part 0 1;" \
	150	"rootfs part 0 2;" \
	151	"uImage fat 0 1;" \
	152	"imx6q-colibri-eval-v3.dtb fat 0 1;" \
	153	"imx6q-colibri-cam-eval-v3.dtb fat 0 1"
	154
	155	#define EMMC_BOOTCMD \
	156	"emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
	157	"rootwait\0" \
	158	"emmcboot=run setup; " \
	159	"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
	160	"${vidargs}; echo Booting from internal eMMC chip...; " \
	161	"run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
	162	"${boot_file} && run fdt_fixup && " \
	163	"bootm ${kernel_addr_r} ${dtbparam}\0" \
	164	"emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
	165	"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
	166
	167	#define MEM_LAYOUT_ENV_SETTINGS \
9af131e3	168	"bootm_size=0x10000000\0" \
a02d517b MK	169	"fdt_addr_r=0x12000000\0" \
	170	"fdt_high=0xffffffff\0" \
	171	"initrd_high=0xffffffff\0" \
	172	"kernel_addr_r=0x11000000\0" \
	173	"ramdisk_addr_r=0x12100000\0"
	174
	175	#define NFS_BOOTCMD \
	176	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
	177	"nfsboot=run setup; " \
	178	"setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
	179	"${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
	180	"run nfsdtbload; dhcp ${kernel_addr_r} " \
	181	"&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
	182	"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
	183	"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
	184
	185	#define SD_BOOTCMD \
	186	"sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
	187	"rootwait\0" \
	188	"sdboot=run setup; " \
	189	"setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
	190	"${vidargs}; echo Booting from SD card; " \
	191	"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
	192	"${boot_file} && run fdt_fixup && " \
	193	"bootm ${kernel_addr_r} ${dtbparam}\0" \
	194	"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
	195	"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
	196
	197	#define USB_BOOTCMD \
	198	"usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
	199	"rootwait\0" \
	200	"usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
	201	"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
	202	"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
	203	"${boot_file} && run fdt_fixup && " \
	204	"bootm ${kernel_addr_r} ${dtbparam}\0" \
	205	"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
	206	"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
	207
	208	#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
	209	#define CONFIG_EXTRA_ENV_SETTINGS \
	210	"bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
	211	"run nfsboot ; echo ; echo nfsboot failed ; " \
	212	"usb start ;" \
	213	"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
	214	"boot_file=uImage\0" \
	215	"console=ttymxc0\0" \
	216	"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
	217	"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
	218	EMMC_BOOTCMD \
	219	"fdt_file=" FDT_FILE "\0" \
	220	"fdt_fixup=;\0" \
	221	MEM_LAYOUT_ENV_SETTINGS \
	222	NFS_BOOTCMD \
	223	SD_BOOTCMD \
	224	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
	225	"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
	226	"flash_eth.img && source ${loadaddr}\0" \
	227	"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
	228	"${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
	229	"source ${loadaddr}\0" \
	230	"setup=setenv setupargs fec_mac=${ethaddr} " \
	231	"consoleblank=0 no_console_suspend=1 console=tty1 " \
	232	"console=${console},${baudrate}n8\0 " \
233	"setupdate=run setsdupdate \|\| run setusbupdate \|\| run setethupdate\0" \
234	"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
235	"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
236	"source ${loadaddr}\0" \
237	"splashpos=m,m\0" \
238	"vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
239	"video=mxcfb1:off fbmem=8M\0 "
240
241	/* Miscellaneous configurable options */
242	#define CONFIG_SYS_LONGHELP
243	#define CONFIG_AUTO_COMPLETE
244	#undef CONFIG_SYS_CBSIZE
245	#define CONFIG_SYS_CBSIZE 1024
246	#undef CONFIG_SYS_MAXARGS
247	#define CONFIG_SYS_MAXARGS 48
248
249	#define CONFIG_SYS_ALT_MEMTEST
250	#define CONFIG_SYS_MEMTEST_START 0x10000000
251	#define CONFIG_SYS_MEMTEST_END 0x10010000
252	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
253
254	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
255
256	#define CONFIG_CMDLINE_EDITING
257
258	/* Physical Memory Map */
259	#define CONFIG_NR_DRAM_BANKS 1
260	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
261
262	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
263	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
264	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
265
266	#define CONFIG_SYS_INIT_SP_OFFSET \
267	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
268	#define CONFIG_SYS_INIT_SP_ADDR \
269	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
270
e856bdcf	271	/* environment organization */
a02d517b MK	272	#define CONFIG_ENV_SIZE (8 * 1024)
	273
	274	#define CONFIG_ENV_IS_IN_MMC
	275
	276	#if defined(CONFIG_ENV_IS_IN_MMC)
	277	/* Environment in eMMC, before config block at the end of 1st "boot sector" */
	278	#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
	279	CONFIG_TDX_CFG_BLOCK_OFFSET)
	280	#define CONFIG_SYS_MMC_ENV_DEV 0
	281	#define CONFIG_SYS_MMC_ENV_PART 1
	282	#endif
	283
	284	#define CONFIG_OF_SYSTEM_SETUP
	285
	286	#define CONFIG_CMD_TIME
	287
	288	#define CONFIG_SUPPORT_RAW_INITRD
	289
a02d517b	290	#endif /* __CONFIG_H */