]>
Commit | Line | Data |
---|---|---|
ae440ab0 SA |
1 | /* |
2 | * Copyright 2016 Toradex AG | |
3 | * | |
4 | * Configuration settings for the Colibri iMX7 module. | |
5 | * | |
6 | * based on mx7dsabresd.h: | |
7 | * Copyright (C) 2015 Freescale Semiconductor, Inc. | |
8 | * | |
9 | * SPDX-License-Identifier: GPL-2.0+ | |
10 | */ | |
11 | ||
12 | #ifndef __COLIBRI_IMX7_CONFIG_H | |
13 | #define __COLIBRI_IMX7_CONFIG_H | |
14 | ||
15 | #include "mx7_common.h" | |
16 | ||
17 | #define CONFIG_SYS_THUMB_BUILD | |
ae440ab0 SA |
18 | |
19 | /*#define CONFIG_DBG_MONITOR*/ | |
20 | #define PHYS_SDRAM_SIZE SZ_512M | |
21 | ||
b891d010 | 22 | #define CONFIG_ARCH_MISC_INIT |
ae440ab0 | 23 | #define CONFIG_BOARD_EARLY_INIT_F |
ae440ab0 | 24 | |
b891d010 MZ |
25 | #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */ |
26 | ||
27 | #define CONFIG_ENV_VARS_UBOOT_CONFIG | |
28 | #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG | |
ae440ab0 SA |
29 | |
30 | /* Size of malloc() pool */ | |
31 | #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) | |
32 | ||
ae440ab0 SA |
33 | #define CONFIG_CMD_BMODE |
34 | ||
35 | /* Network */ | |
36 | #define CONFIG_FEC_MXC | |
37 | #define CONFIG_MII | |
38 | #define CONFIG_FEC_XCV_TYPE RMII | |
39 | #define CONFIG_ETHPRIME "FEC" | |
40 | #define CONFIG_FEC_MXC_PHYADDR 0 | |
41 | ||
42 | #define CONFIG_PHYLIB | |
43 | #define CONFIG_PHY_MICREL | |
ae440ab0 | 44 | #define CONFIG_IP_DEFRAG |
f7c81e28 MZ |
45 | #define CONFIG_TFTP_BLOCKSIZE 16352 |
46 | #define CONFIG_TFTP_TSIZE | |
ae440ab0 SA |
47 | |
48 | /* ENET1 */ | |
49 | #define IMX_FEC_BASE ENET_IPS_BASE_ADDR | |
50 | ||
51 | /* MMC Config*/ | |
52 | #define CONFIG_SYS_FSL_ESDHC_ADDR 0 | |
53 | #define CONFIG_SYS_FSL_USDHC_NUM 1 | |
54 | ||
55 | #undef CONFIG_BOOTM_PLAN9 | |
56 | #undef CONFIG_BOOTM_RTEMS | |
57 | ||
58 | /* I2C configs */ | |
ae440ab0 | 59 | #define CONFIG_SYS_I2C_MXC |
ae440ab0 SA |
60 | #define CONFIG_SYS_I2C_SPEED 100000 |
61 | ||
62 | #define CONFIG_IPADDR 192.168.10.2 | |
63 | #define CONFIG_NETMASK 255.255.255.0 | |
64 | #define CONFIG_SERVERIP 192.168.10.1 | |
65 | ||
66 | #define MEM_LAYOUT_ENV_SETTINGS \ | |
67 | "fdt_addr_r=0x82000000\0" \ | |
68 | "fdt_high=0xffffffff\0" \ | |
69 | "initrd_high=0xffffffff\0" \ | |
70 | "kernel_addr_r=0x81000000\0" \ | |
71 | "ramdisk_addr_r=0x82100000\0" | |
72 | ||
73 | #define SD_BOOTCMD \ | |
74 | "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ | |
75 | "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \ | |
76 | "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ | |
77 | "run m4boot && " \ | |
78 | "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \ | |
79 | "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ | |
80 | "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ | |
81 | ||
82 | #define NFS_BOOTCMD \ | |
83 | "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ | |
84 | "nfsboot=run setup; " \ | |
85 | "setenv bootargs ${defargs} ${nfsargs} " \ | |
86 | "${setupargs} ${vidargs}; echo Booting from NFS...;" \ | |
87 | "dhcp ${kernel_addr_r} && " \ | |
88 | "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ | |
89 | "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ | |
90 | ||
91 | #define UBI_BOOTCMD \ | |
92 | "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ | |
93 | "ubi.fm_autoconvert=1\0" \ | |
94 | "ubiboot=run setup; " \ | |
95 | "setenv bootargs ${defargs} ${ubiargs} " \ | |
96 | "${setupargs} ${vidargs}; echo Booting from NAND...; " \ | |
97 | "ubi part ubi && run m4boot && " \ | |
98 | "ubi read ${kernel_addr_r} kernel && " \ | |
99 | "ubi read ${fdt_addr_r} dtb && " \ | |
100 | "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ | |
101 | ||
102 | #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot" | |
103 | ||
104 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
105 | MEM_LAYOUT_ENV_SETTINGS \ | |
106 | NFS_BOOTCMD \ | |
107 | SD_BOOTCMD \ | |
108 | UBI_BOOTCMD \ | |
109 | "console=ttymxc0\0" \ | |
110 | "defargs=\0" \ | |
111 | "fdt_board=eval-v3\0" \ | |
112 | "fdt_fixup=;\0" \ | |
113 | "m4boot=;\0" \ | |
114 | "ip_dyn=yes\0" \ | |
115 | "kernel_file=zImage\0" \ | |
116 | "mtdparts=" MTDPARTS_DEFAULT "\0" \ | |
117 | "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ | |
118 | "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ | |
119 | "${board}/flash_eth.img && source ${loadaddr}\0" \ | |
120 | "setsdupdate=mmc rescan && setenv interface mmc && " \ | |
121 | "fatload ${interface} 0:1 ${loadaddr} " \ | |
122 | "${board}/flash_blk.img && source ${loadaddr}\0" \ | |
123 | "setup=setenv setupargs " \ | |
124 | "console=tty1 console=${console}" \ | |
125 | ",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \ | |
126 | "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ | |
127 | "setusbupdate=usb start && setenv interface usb && " \ | |
128 | "fatload ${interface} 0:1 ${loadaddr} " \ | |
129 | "${board}/flash_blk.img && source ${loadaddr}\0" \ | |
130 | "splashpos=m,m\0" \ | |
131 | "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \ | |
132 | ||
133 | /* Miscellaneous configurable options */ | |
134 | #define CONFIG_SYS_LONGHELP | |
135 | ||
136 | #define CONFIG_SYS_MEMTEST_START 0x80000000 | |
137 | #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x0c000000) | |
138 | ||
139 | #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR | |
140 | #define CONFIG_SYS_HZ 1000 | |
141 | ||
142 | #define CONFIG_STACKSIZE SZ_128K | |
143 | ||
144 | /* Physical Memory Map */ | |
145 | #define CONFIG_NR_DRAM_BANKS 1 | |
146 | #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR | |
147 | ||
148 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM | |
149 | #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR | |
150 | #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE | |
151 | ||
152 | #define CONFIG_SYS_INIT_SP_OFFSET \ | |
153 | (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) | |
154 | #define CONFIG_SYS_INIT_SP_ADDR \ | |
155 | (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) | |
156 | ||
157 | /* FLASH and environment organization */ | |
158 | #define CONFIG_SYS_NO_FLASH | |
159 | #define CONFIG_ENV_IS_IN_NAND | |
160 | ||
161 | #if defined(CONFIG_ENV_IS_IN_MMC) | |
162 | #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ | |
163 | #define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ | |
164 | #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ | |
165 | #define CONFIG_ENV_OFFSET (8 * SZ_64K) | |
166 | #elif defined(CONFIG_ENV_IS_IN_NAND) | |
167 | #define CONFIG_ENV_OFFSET (4 * 1024 * 1024) | |
168 | #define CONFIG_ENV_SECT_SIZE (128 * 1024) | |
169 | #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE | |
170 | #endif | |
171 | ||
172 | #define CONFIG_NAND_MXS | |
173 | #define CONFIG_CMD_NAND_TRIMFFS | |
174 | ||
175 | /* NAND stuff */ | |
176 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
177 | #define CONFIG_SYS_NAND_BASE 0x40000000 | |
178 | #define CONFIG_SYS_NAND_5_ADDR_CYCLE | |
179 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
180 | #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES | |
181 | #define CONFIG_CMD_NAND_TORTURE | |
182 | ||
183 | /* UBI stuff */ | |
184 | #define CONFIG_RBTREE | |
185 | #define CONFIG_LZO | |
ae440ab0 SA |
186 | #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ |
187 | ||
188 | /* Dynamic MTD partition support */ | |
189 | #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ | |
190 | #define CONFIG_MTD_PARTITIONS | |
191 | #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ | |
192 | #define MTDIDS_DEFAULT "nand0=gpmi-nand" | |
193 | #define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:" \ | |
194 | "512k(mx7-bcb)," \ | |
195 | "3584k(u-boot)ro," \ | |
196 | "512k(u-boot-env)," \ | |
197 | "-(ubi)" | |
198 | ||
199 | /* DMA stuff, needed for GPMI/MXS NAND support */ | |
200 | #define CONFIG_APBH_DMA | |
201 | #define CONFIG_APBH_DMA_BURST | |
202 | #define CONFIG_APBH_DMA_BURST8 | |
203 | ||
204 | /* USB Configs */ | |
ae440ab0 SA |
205 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
206 | ||
207 | #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) | |
208 | #define CONFIG_MXC_USB_FLAGS 0 | |
209 | #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 | |
210 | ||
211 | #define CONFIG_IMX_THERMAL | |
212 | ||
213 | #define CONFIG_USBD_HS | |
214 | ||
215 | #define CONFIG_USB_FUNCTION_MASS_STORAGE | |
216 | ||
217 | /* USB Device Firmware Update support */ | |
ae440ab0 SA |
218 | #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M |
219 | #define DFU_DEFAULT_POLL_TIMEOUT 300 | |
220 | ||
ae440ab0 | 221 | #ifdef CONFIG_VIDEO |
ae440ab0 SA |
222 | #define CONFIG_VIDEO_MXS |
223 | #define CONFIG_VIDEO_LOGO | |
ae440ab0 SA |
224 | #define CONFIG_SPLASH_SCREEN |
225 | #define CONFIG_SPLASH_SCREEN_ALIGN | |
226 | #define CONFIG_CMD_BMP | |
227 | #define CONFIG_BMP_16BPP | |
228 | #define CONFIG_VIDEO_BMP_RLE8 | |
229 | #define CONFIG_VIDEO_BMP_LOGO | |
230 | #endif | |
231 | ||
232 | #endif |