[people/ms/u-boot.git] / include / configs / colibri_t20.h

/*
 * Copyright (C) 2012 Lucas Stach
 *
 * Configuration settings for the Toradex Colibri T20 modules.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "tegra20-common.h"

#define CONFIG_ARCH_MISC_INIT

/* High-level configuration options */
#define CONFIG_DISPLAY_BOARDINFO_LATE	/* Calls show_board_info() */

/* Board-specific serial config */
#define CONFIG_TEGRA_ENABLE_UARTA
#define CONFIG_TEGRA_UARTA_SDIO1
#define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE

/* I2C */
#define CONFIG_SYS_I2C_TEGRA

/* SD/MMC support */
#define CONFIG_GENERIC_MMC

/* USB host support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_MAX_CONTROLLER_COUNT	3

/* USB networking support */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX

/* General networking support */
#define CONFIG_IP_DEFRAG
#define CONFIG_TFTP_BLOCKSIZE		1536
#define CONFIG_TFTP_TSIZE

/* LCD support */
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_CMD_BMP
#define CONFIG_LCD_LOGO

/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_TEGRA_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE	1

/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
#define MTDIDS_DEFAULT		"nand0=tegra_nand"
#define MTDPARTS_DEFAULT	"mtdparts=tegra_nand:"		\
				"2m(u-boot)ro,"			\
				"1m(u-boot-env),"		\
				"1m(cfgblock)ro,"		\
				"-(ubi)"

/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET		(SZ_2M)
#undef CONFIG_ENV_SIZE		/* undef size from tegra20-common.h */
#define CONFIG_ENV_SIZE			(SZ_64K)

/* UBI */
#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */
#define CONFIG_LZO
#define CONFIG_RBTREE

/* Debug commands */

/* Miscellaneous commands */
#define CONFIG_FAT_WRITE

#define BOARD_EXTRA_ENV_SETTINGS \
	"mtdparts=" MTDPARTS_DEFAULT "\0"

/* Increase console I/O buffer size */
#undef CONFIG_SYS_CBSIZE
#define CONFIG_SYS_CBSIZE		1024

/* Increase arguments buffer size */
#undef CONFIG_SYS_BARGSIZE
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

/* Increase print buffer size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)

/* Increase maximum number of arguments */
#undef CONFIG_SYS_MAXARGS
#define CONFIG_SYS_MAXARGS		32

#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"

#endif /* __CONFIG_H */
Commit	Line	Data
6bbda883	1	/*
e57c6e5b	2	* Copyright (C) 2012 Lucas Stach
6bbda883	3	*
36a01bdd MZ	4	* Configuration settings for the Toradex Colibri T20 modules.
36a01bdd MZ	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
6bbda883 LS	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	#include "tegra20-common.h"
	13
a5825625 MZ	14	#define CONFIG_ARCH_MISC_INIT
a5825625 MZ	15
6bbda883	16	/* High-level configuration options */
b891d010	17	#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
6bbda883 LS	18
	19	/* Board-specific serial config */
	20	#define CONFIG_TEGRA_ENABLE_UARTA
	21	#define CONFIG_TEGRA_UARTA_SDIO1
e979a808 MZ	22	#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
e979a808 MZ	23
c1faf002 MZ	24	/* I2C */
c1faf002 MZ	25	#define CONFIG_SYS_I2C_TEGRA
c1faf002	26
6bbda883	27	/* SD/MMC support */
6bbda883	28	#define CONFIG_GENERIC_MMC
6bbda883	29
6bbda883 LS	30	/* USB host support */
	31	#define CONFIG_USB_EHCI
	32	#define CONFIG_USB_EHCI_TEGRA
5493a32c	33	#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
6bbda883 LS	34
	35	/* USB networking support */
	36	#define CONFIG_USB_HOST_ETHER
	37	#define CONFIG_USB_ETHER_ASIX
e979a808 MZ	38
e979a808 MZ	39	/* General networking support */
baa6f0f1 MK	40	#define CONFIG_IP_DEFRAG
	41	#define CONFIG_TFTP_BLOCKSIZE 1536
	42	#define CONFIG_TFTP_TSIZE
6bbda883	43
b2ea19b5	44	/* LCD support */
b2ea19b5	45	#define CONFIG_SYS_WHITE_ON_BLACK
b2ea19b5 MZ	46	#define CONFIG_CMD_BMP
	47	#define CONFIG_LCD_LOGO
	48
6bbda883 LS	49	/* NAND support */
	50	#define CONFIG_CMD_NAND
	51	#define CONFIG_TEGRA_NAND
36a01bdd	52	#define CONFIG_SYS_MAX_NAND_DEVICE 1
6bbda883	53
8c6dcbb6 MZ	54	/* Dynamic MTD partition support */
	55	#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
	56	#define CONFIG_MTD_PARTITIONS
	57	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	58	#define MTDIDS_DEFAULT "nand0=tegra_nand"
	59	#define MTDPARTS_DEFAULT "mtdparts=tegra_nand:" \
	60	"2m(u-boot)ro," \
	61	"1m(u-boot-env)," \
	62	"1m(cfgblock)ro," \
	63	"-(ubi)"
	64
6bbda883 LS	65	/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
6bbda883 LS	66	#define CONFIG_ENV_IS_IN_NAND
36a01bdd MZ	67	#define CONFIG_ENV_OFFSET (SZ_2M)
	68	#undef CONFIG_ENV_SIZE /* undef size from tegra20-common.h */
	69	#define CONFIG_ENV_SIZE (SZ_64K)
6bbda883	70
c60bc71d	71	/* UBI */
c60bc71d MZ	72	#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
c60bc71d MZ	73	#define CONFIG_LZO
c60bc71d MZ	74	#define CONFIG_RBTREE
c60bc71d MZ	75
6bbda883	76	/* Debug commands */
6bbda883	77
e979a808	78	/* Miscellaneous commands */
e979a808 MZ	79	#define CONFIG_FAT_WRITE
e979a808 MZ	80
8c6dcbb6 MZ	81	#define BOARD_EXTRA_ENV_SETTINGS \
	82	"mtdparts=" MTDPARTS_DEFAULT "\0"
	83
e979a808 MZ	84	/* Increase console I/O buffer size */
	85	#undef CONFIG_SYS_CBSIZE
	86	#define CONFIG_SYS_CBSIZE 1024
	87
	88	/* Increase arguments buffer size */
	89	#undef CONFIG_SYS_BARGSIZE
	90	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	91
	92	/* Increase print buffer size */
	93	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	94
	95	/* Increase maximum number of arguments */
	96	#undef CONFIG_SYS_MAXARGS
	97	#define CONFIG_SYS_MAXARGS 32
	98
	99	#include "tegra-common-usb-gadget.h"
6bbda883 LS	100	#include "tegra-common-post.h"
	101
	102	#endif /* __CONFIG_H */