[people/ms/u-boot.git] / include / configs / colibri_vf.h

/*
 * Copyright 2015 Toradex, Inc.
 *
 * Configuration settings for the Toradex VF50/VF61 module.
 *
 * Based on vf610twr.h:
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>
#include <config_cmd_default.h>

#define CONFIG_VF610
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_USE_ARCH_MEMCPY
#define CONFIG_USE_ARCH_MEMSET

#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_SKIP_LOWLEVEL_INIT

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_FSL_LPUART
#define LPUART_BASE			UART0_BASE

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_VERSION_VARIABLE
#define CONFIG_SYS_UART_PORT		(0)
#define CONFIG_BAUDRATE			115200
#define CONFIG_CMD_ASKENV

/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR

/* GPIO support */
#define CONFIG_DM_GPIO
#define CONFIG_CMD_GPIO
#define CONFIG_VYBRID_GPIO

/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
#define MTDIDS_DEFAULT		"nand0=vf610_nfc"
#define MTDPARTS_DEFAULT	"mtdparts=vf610_nfc:"		\
				"128k(vf-bcb)ro,"		\
				"1408k(u-boot)ro,"		\
				"512k(u-boot-env),"		\
				"-(ubi)"

#undef CONFIG_CMD_IMLS

#define CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1

#define CONFIG_SYS_FSL_ERRATUM_ESDHC111

#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT3
#define CONFIG_CMD_EXT4
#define CONFIG_DOS_PARTITION

#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_UBI
#define CONFIG_MTD_UBI_FASTMAP
#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET1_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_FEC_MXC_PHYADDR          0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

#define CONFIG_IPADDR		192.168.10.2
#define CONFIG_NETMASK		255.255.255.0
#define CONFIG_SERVERIP		192.168.10.1

#define CONFIG_BOOTDELAY		1
#define CONFIG_BOARD_LATE_INIT

#define CONFIG_LOADADDR			0x80008000
#define CONFIG_FDTADDR			0x84000000

/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_SYS_TEXT_BASE		0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT		524288

#define SD_BOOTCMD \
	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define NFS_BOOTCMD \
	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
	"nfsboot=run setup; " \
	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	"dhcp ${kernel_addr_r} && "	\
	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define UBI_BOOTCMD	\
	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	"ubi.fm_autoconvert=1\0" \
	"ubiboot=run setup; " \
	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
	"ubi part ubi && ubifsmount ubi0:rootfs && " \
	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"

#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel_addr_r=0x82000000\0" \
	"fdt_addr_r=0x84000000\0" \
	"kernel_file=zImage\0" \
	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
	"fdt_board=eval-v3\0" \
	"defargs=\0" \
	"console=ttyLP0\0" \
	"setup=setenv setupargs " \
	"console=tty1 console=${console}" \
	",${baudrate}n8 ${memargs}\0" \
	"setsdupdate=mmc rescan && set interface mmc && " \
	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setusbupdate=usb start && set interface usb && " \
	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setupdate=run setsdupdate || run setusbupdate\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
	SD_BOOTCMD \
	NFS_BOOTCMD \
	UBI_BOOTCMD

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#define CONFIG_SYS_PROMPT		"Colibri VFxx # "
#undef CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		\
			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x80010000
#define CONFIG_SYS_MEMTEST_END		0x87C00000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000
#define CONFIG_CMDLINE_EDITING

/*
 * Stack sizes
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */

/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			(0x80000000)
#define PHYS_SDRAM_SIZE			(256 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_SYS_NO_FLASH

#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
#define CONFIG_ENV_SIZE			(8 * 1024)
#endif

#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE			(64 * 2048)
#define CONFIG_ENV_RANGE		(4 * 64 * 2048)
#define CONFIG_ENV_OFFSET		(12 * 64 * 2048)
#endif

#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ

#define CONFIG_SYS_NO_FLASH

#define CONFIG_SYS_CACHELINE_SIZE 32

/* USB Host Support */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_VF
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

/* USB Client Support */
#define CONFIG_USB_GADGET
#define CONFIG_CI_UDC
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW      2
#define CONFIG_TRDX_VID                  0x1B67
#define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
#define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
#define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
#define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019
#define CONFIG_G_DNL_MANUFACTURER        "Toradex"
#define CONFIG_G_DNL_VENDOR_NUM          CONFIG_TRDX_VID
#define CONFIG_G_DNL_PRODUCT_NUM         CONFIG_TRDX_PID_COLIBRI_VF50

/* USB DFU */
#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_CMD_DFU
#define CONFIG_DFU_FUNCTION
#define CONFIG_DFU_NAND
#define CONFIG_DFU_MMC
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)

/* USB Storage */
#define CONFIG_USB_STORAGE
#define CONFIG_USB_GADGET_MASS_STORAGE
#define CONFIG_CMD_USB_MASS_STORAGE

/* Enable SPI support */
#ifdef CONFIG_OF_CONTROL
#define CONFIG_DM_SPI
#define CONFIG_CMD_SPI
#define CONFIG_FSL_DSPI
#endif

#endif /* __CONFIG_H */
Commit	Line	Data
e7b860fa SM	1	/*
	2	* Copyright 2015 Toradex, Inc.
	3	*
	4	* Configuration settings for the Toradex VF50/VF61 module.
	5	*
	6	* Based on vf610twr.h:
	7	* Copyright 2013 Freescale Semiconductor, Inc.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
	15	#include <asm/arch/imx-regs.h>
	16	#include <config_cmd_default.h>
	17
	18	#define CONFIG_VF610
	19	#define CONFIG_SYS_THUMB_BUILD
	20	#define CONFIG_USE_ARCH_MEMCPY
	21	#define CONFIG_USE_ARCH_MEMSET
	22
	23	#define CONFIG_SYS_GENERIC_BOARD
	24	#define CONFIG_ARCH_MISC_INIT
	25	#define CONFIG_DISPLAY_CPUINFO
	26	#define CONFIG_DISPLAY_BOARDINFO
	27
	28	#define CONFIG_SKIP_LOWLEVEL_INIT
	29
	30	#define CONFIG_CMD_FUSE
	31	#ifdef CONFIG_CMD_FUSE
	32	#define CONFIG_MXC_OCOTP
	33	#endif
	34
	35	/* Size of malloc() pool */
	36	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	37
	38	#define CONFIG_BOARD_EARLY_INIT_F
	39
	40	#define CONFIG_FSL_LPUART
	41	#define LPUART_BASE UART0_BASE
	42
	43	/* Allow to overwrite serial and ethaddr */
	44	#define CONFIG_ENV_OVERWRITE
	45	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	46	#define CONFIG_VERSION_VARIABLE
	47	#define CONFIG_SYS_UART_PORT (0)
	48	#define CONFIG_BAUDRATE 115200
	49	#define CONFIG_CMD_ASKENV
	50
	51	/* NAND support */
	52	#define CONFIG_CMD_NAND
8fca2d8c	53	#define CONFIG_SYS_NAND_ONFI_DETECTION
e7b860fa SM	54	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	55	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
	56
30748d81 BD	57	/* GPIO support */
	58	#define CONFIG_DM_GPIO
	59	#define CONFIG_CMD_GPIO
	60	#define CONFIG_VYBRID_GPIO
	61
e7b860fa SM	62	/* Dynamic MTD partition support */
	63	#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
	64	#define CONFIG_MTD_PARTITIONS
	65	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	66	#define MTDIDS_DEFAULT "nand0=vf610_nfc"
	67	#define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
	68	"128k(vf-bcb)ro," \
	69	"1408k(u-boot)ro," \
	70	"512k(u-boot-env)," \
	71	"-(ubi)"
	72
	73	#undef CONFIG_CMD_IMLS
	74
	75	#define CONFIG_MMC
	76	#define CONFIG_FSL_ESDHC
	77	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	78	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	79
	80	#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
	81
	82	#define CONFIG_CMD_MMC
	83	#define CONFIG_GENERIC_MMC
	84	#define CONFIG_CMD_FAT
	85	#define CONFIG_CMD_EXT3
	86	#define CONFIG_CMD_EXT4
	87	#define CONFIG_DOS_PARTITION
	88
	89	#define CONFIG_RBTREE
	90	#define CONFIG_LZO
	91	#define CONFIG_CMD_FS_GENERIC
	92	#define CONFIG_CMD_BOOTZ
	93	#define CONFIG_CMD_UBI
	94	#define CONFIG_MTD_UBI_FASTMAP
	95	#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
	96
	97	#define CONFIG_CMD_PING
	98	#define CONFIG_CMD_DHCP
	99	#define CONFIG_CMD_MII
e7b860fa SM	100	#define CONFIG_FEC_MXC
	101	#define CONFIG_MII
	102	#define IMX_FEC_BASE ENET1_BASE_ADDR
	103	#define CONFIG_FEC_XCV_TYPE RMII
	104	#define CONFIG_FEC_MXC_PHYADDR 0
	105	#define CONFIG_PHYLIB
	106	#define CONFIG_PHY_MICREL
	107
	108	#define CONFIG_IPADDR 192.168.10.2
	109	#define CONFIG_NETMASK 255.255.255.0
	110	#define CONFIG_SERVERIP 192.168.10.1
	111
	112	#define CONFIG_BOOTDELAY 1
	113	#define CONFIG_BOARD_LATE_INIT
	114
	115	#define CONFIG_LOADADDR 0x80008000
	116	#define CONFIG_FDTADDR 0x84000000
	117
	118	/* We boot from the gfxRAM area of the OCRAM. */
	119	#define CONFIG_SYS_TEXT_BASE 0x3f408000
	120	#define CONFIG_BOARD_SIZE_LIMIT 524288
	121
	122	#define SD_BOOTCMD \
	123	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
	124	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
	125	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	126	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
	127	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	128	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	129
	130	#define NFS_BOOTCMD \
	131	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
	132	"nfsboot=run setup; " \
	133	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
	134	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	135	"dhcp ${kernel_addr_r} && " \
	136	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	137	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	138
	139	#define UBI_BOOTCMD \
	140	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	141	"ubi.fm_autoconvert=1\0" \
	142	"ubiboot=run setup; " \
	143	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
	144	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
	145	"ubi part ubi && ubifsmount ubi0:rootfs && " \
	146	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
	147	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	148	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	149
	150	#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
	151
bba97cd2 SM	152	#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
bba97cd2 SM	153
e7b860fa SM	154	#define CONFIG_EXTRA_ENV_SETTINGS \
	155	"kernel_addr_r=0x82000000\0" \
	156	"fdt_addr_r=0x84000000\0" \
	157	"kernel_file=zImage\0" \
	158	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
	159	"fdt_board=eval-v3\0" \
	160	"defargs=\0" \
	161	"console=ttyLP0\0" \
	162	"setup=setenv setupargs " \
	163	"console=tty1 console=${console}" \
	164	",${baudrate}n8 ${memargs}\0" \
	165	"setsdupdate=mmc rescan && set interface mmc && " \
	166	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	167	"source ${loadaddr}\0" \
	168	"setusbupdate=usb start && set interface usb && " \
	169	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	170	"source ${loadaddr}\0" \
	171	"setupdate=run setsdupdate \|\| run setusbupdate\0" \
	172	"mtdparts=" MTDPARTS_DEFAULT "\0" \
bba97cd2	173	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
e7b860fa SM	174	SD_BOOTCMD \
	175	NFS_BOOTCMD \
	176	UBI_BOOTCMD
	177
	178	/* Miscellaneous configurable options */
	179	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	180	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	181	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	182	#define CONFIG_SYS_PROMPT "Colibri VFxx # "
	183	#undef CONFIG_AUTO_COMPLETE
	184	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	185	#define CONFIG_SYS_PBSIZE \
	186	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	187	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	188	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	189
	190	#define CONFIG_CMD_MEMTEST
	191	#define CONFIG_SYS_MEMTEST_START 0x80010000
	192	#define CONFIG_SYS_MEMTEST_END 0x87C00000
	193
	194	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	195	#define CONFIG_SYS_HZ 1000
	196	#define CONFIG_CMDLINE_EDITING
	197
	198	/*
	199	* Stack sizes
	200	* The stack sizes are set up in start.S using the settings below
	201	*/
	202	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
	203
	204	/* Physical memory map */
	205	#define CONFIG_NR_DRAM_BANKS 1
	206	#define PHYS_SDRAM (0x80000000)
	207	#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
	208
	209	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	210	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	211	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	212
	213	#define CONFIG_SYS_INIT_SP_OFFSET \
	214	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	215	#define CONFIG_SYS_INIT_SP_ADDR \
	216	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	217
	218	/* Environment organization */
	219	#define CONFIG_SYS_NO_FLASH
	220
	221	#ifdef CONFIG_ENV_IS_IN_MMC
	222	#define CONFIG_SYS_MMC_ENV_DEV 0
	223	#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
	224	#define CONFIG_ENV_SIZE (8 * 1024)
	225	#endif
	226
	227	#ifdef CONFIG_ENV_IS_IN_NAND
	228	#define CONFIG_ENV_SIZE (64 * 2048)
	229	#define CONFIG_ENV_RANGE (4 * 64 * 2048)
	230	#define CONFIG_ENV_OFFSET (12 * 64 * 2048)
	231	#endif
	232
	233	#define CONFIG_OF_LIBFDT
	234	#define CONFIG_CMD_BOOTZ
	235
	236	#define CONFIG_SYS_NO_FLASH
	237
238	#define CONFIG_SYS_CACHELINE_SIZE 32
239
bba97cd2 SM	240	/* USB Host Support */
	241	#define CONFIG_CMD_USB
	242	#define CONFIG_USB_EHCI
	243	#define CONFIG_USB_EHCI_VF
	244	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	245	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	246
	247	/* USB Client Support */
	248	#define CONFIG_USB_GADGET
	249	#define CONFIG_CI_UDC
	250	#define CONFIG_USB_GADGET_DUALSPEED
	251	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	252	#define CONFIG_TRDX_VID 0x1B67
	253	#define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016
	254	#define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017
	255	#define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018
	256	#define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019
	257	#define CONFIG_G_DNL_MANUFACTURER "Toradex"
	258	#define CONFIG_G_DNL_VENDOR_NUM CONFIG_TRDX_VID
	259	#define CONFIG_G_DNL_PRODUCT_NUM CONFIG_TRDX_PID_COLIBRI_VF50
	260
	261	/* USB DFU */
	262	#define CONFIG_USBDOWNLOAD_GADGET
	263	#define CONFIG_CMD_DFU
	264	#define CONFIG_DFU_FUNCTION
	265	#define CONFIG_DFU_NAND
	266	#define CONFIG_DFU_MMC
	267	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
	268
	269	/* USB Storage */
	270	#define CONFIG_USB_STORAGE
	271	#define CONFIG_USB_GADGET_MASS_STORAGE
	272	#define CONFIG_CMD_USB_MASS_STORAGE
	273
98e3fd3d BD	274	/* Enable SPI support */
	275	#ifdef CONFIG_OF_CONTROL
	276	#define CONFIG_DM_SPI
	277	#define CONFIG_CMD_SPI
	278	#define CONFIG_FSL_DSPI
	279	#endif
	280
e7b860fa	281	#endif /* __CONFIG_H */