]>
Commit | Line | Data |
---|---|---|
b9944a77 DE |
1 | /* |
2 | * (C) Copyright 2013 | |
3 | * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc | |
4 | * | |
5 | * based on P1022DS.h | |
6 | * | |
7 | * See file CREDITS for list of people who contributed to this | |
8 | * project. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or | |
11 | * modify it under the terms of the GNU General Public License as | |
12 | * published by the Free Software Foundation; either version 2 of | |
13 | * the License, or (at your option) any later version. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
23 | * MA 02111-1307 USA | |
24 | */ | |
25 | ||
26 | #ifndef __CONFIG_H | |
27 | #define __CONFIG_H | |
28 | ||
b9944a77 DE |
29 | #ifdef CONFIG_SDCARD |
30 | #define CONFIG_RAMBOOT_SDCARD | |
31 | #endif | |
32 | ||
33 | #ifdef CONFIG_SPIFLASH | |
34 | #define CONFIG_RAMBOOT_SPIFLASH | |
35 | #endif | |
36 | ||
37 | /* High Level Configuration Options */ | |
b9944a77 DE |
38 | #define CONFIG_CONTROLCENTERD |
39 | #define CONFIG_MP /* support multiple processors */ | |
40 | ||
41 | #define CONFIG_SYS_NO_FLASH | |
42 | #define CONFIG_ENABLE_36BIT_PHYS | |
b9944a77 | 43 | |
b9944a77 DE |
44 | #ifdef CONFIG_PHYS_64BIT |
45 | #define CONFIG_ADDR_MAP | |
46 | #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ | |
47 | #endif | |
48 | ||
49 | #define CONFIG_L2_CACHE | |
50 | #define CONFIG_BTB | |
51 | ||
52 | #define CONFIG_SYS_CLK_FREQ 66666600 | |
53 | #define CONFIG_DDR_CLK_FREQ 66666600 | |
54 | ||
55 | #define CONFIG_SYS_RAMBOOT | |
56 | ||
57 | #ifdef CONFIG_TRAILBLAZER | |
58 | ||
59 | #define CONFIG_SYS_TEXT_BASE 0xf8fc0000 | |
60 | #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc | |
61 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) | |
62 | ||
63 | /* | |
64 | * Config the L2 Cache | |
65 | */ | |
66 | #define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000 | |
67 | #ifdef CONFIG_PHYS_64BIT | |
68 | #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull | |
69 | #else | |
70 | #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR | |
71 | #endif | |
72 | #define CONFIG_SYS_L2_SIZE (256 << 10) | |
73 | #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) | |
74 | ||
75 | #else /* CONFIG_TRAILBLAZER */ | |
76 | ||
77 | #define CONFIG_SYS_TEXT_BASE 0x11000000 | |
78 | #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc | |
79 | #define CONFIG_SYS_MONITOR_LEN (512 * 1024) | |
80 | ||
81 | #endif /* CONFIG_TRAILBLAZER */ | |
82 | ||
83 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE | |
84 | #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) | |
85 | ||
b9944a77 DE |
86 | /* |
87 | * Memory map | |
88 | * | |
89 | * 0x0000_0000 0x3fff_ffff DDR 1G Cacheable | |
90 | * 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable | |
91 | * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable | |
92 | * | |
93 | * Localbus non-cacheable | |
94 | * 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable | |
95 | * 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable | |
96 | * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 | |
97 | * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable | |
98 | */ | |
99 | ||
100 | #define CONFIG_SYS_INIT_RAM_LOCK | |
101 | #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ | |
102 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */ | |
103 | #define CONFIG_SYS_GBL_DATA_OFFSET \ | |
104 | (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) | |
105 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
106 | ||
107 | #ifdef CONFIG_TRAILBLAZER | |
108 | /* leave CCSRBAR at default, because u-boot expects it to be exactly there */ | |
109 | #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT | |
110 | #else | |
111 | #define CONFIG_SYS_CCSRBAR 0xffe00000 | |
112 | #endif | |
113 | #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR | |
114 | #define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200) | |
115 | ||
116 | /* | |
117 | * DDR Setup | |
118 | */ | |
119 | ||
120 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
121 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
122 | #define CONFIG_SYS_SDRAM_SIZE 1024 | |
123 | #define CONFIG_VERY_BIG_RAM | |
124 | ||
b9944a77 DE |
125 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 |
126 | #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
127 | ||
128 | #define CONFIG_SYS_MEMTEST_START 0x00000000 | |
129 | #define CONFIG_SYS_MEMTEST_END 0x3fffffff | |
130 | ||
131 | #ifdef CONFIG_TRAILBLAZER | |
132 | #define CONFIG_SPD_EEPROM | |
133 | #define SPD_EEPROM_ADDRESS 0x52 | |
134 | /*#define CONFIG_FSL_DDR_INTERACTIVE*/ | |
135 | #endif | |
136 | ||
137 | /* | |
138 | * Local Bus Definitions | |
139 | */ | |
140 | #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ | |
141 | ||
142 | #define CONFIG_SYS_ELBC_BASE 0xe0000000 | |
143 | #ifdef CONFIG_PHYS_64BIT | |
144 | #define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull | |
145 | #else | |
146 | #define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE | |
147 | #endif | |
148 | ||
149 | #define CONFIG_UART_BR_PRELIM \ | |
150 | (BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V) | |
151 | #define CONFIG_UART_OR_PRELIM (OR_AM_32KB | 0xff7) | |
152 | ||
153 | #define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */ | |
154 | #define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */ | |
155 | ||
156 | #define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM | |
157 | #define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM | |
158 | ||
159 | /* | |
160 | * Serial Port | |
161 | */ | |
162 | #define CONFIG_CONS_INDEX 2 | |
b9944a77 DE |
163 | #define CONFIG_SYS_NS16550_SERIAL |
164 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
165 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
166 | ||
167 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
168 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
169 | ||
170 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) | |
171 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) | |
172 | ||
173 | /* | |
174 | * I2C | |
175 | */ | |
00f792e0 HS |
176 | #define CONFIG_SYS_I2C |
177 | #define CONFIG_SYS_I2C_FSL | |
178 | #define CONFIG_SYS_FSL_I2C_SPEED 400000 | |
179 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
180 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 | |
181 | #define CONFIG_SYS_FSL_I2C2_SPEED 400000 | |
182 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
183 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 | |
5568fb44 DE |
184 | |
185 | #ifndef CONFIG_TRAILBLAZER | |
5568fb44 | 186 | #endif |
b9944a77 DE |
187 | |
188 | #define CONFIG_PCA9698 /* NXP PCA9698 */ | |
189 | ||
190 | #define CONFIG_CMD_EEPROM | |
191 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 | |
192 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 | |
193 | ||
194 | #ifndef CONFIG_TRAILBLAZER | |
195 | /* | |
196 | * eSPI - Enhanced SPI | |
197 | */ | |
198 | #define CONFIG_HARD_SPI | |
b9944a77 | 199 | |
b9944a77 DE |
200 | #define CONFIG_SF_DEFAULT_SPEED 10000000 |
201 | #define CONFIG_SF_DEFAULT_MODE 0 | |
202 | #endif | |
203 | ||
b9944a77 | 204 | #define CONFIG_SHA1 |
b9944a77 DE |
205 | |
206 | /* | |
207 | * MMC | |
208 | */ | |
b9944a77 | 209 | #define CONFIG_GENERIC_MMC |
b9944a77 DE |
210 | |
211 | #define CONFIG_FSL_ESDHC | |
212 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
213 | ||
b9944a77 DE |
214 | #ifndef CONFIG_TRAILBLAZER |
215 | ||
216 | /* | |
217 | * Video | |
218 | */ | |
219 | #define CONFIG_FSL_DIU_FB | |
220 | #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) | |
b9944a77 DE |
221 | #define CONFIG_CMD_BMP |
222 | ||
223 | /* | |
224 | * General PCI | |
225 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
226 | */ | |
b38eaec5 | 227 | #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ |
b9944a77 | 228 | #define CONFIG_PCI_INDIRECT_BRIDGE |
b9944a77 DE |
229 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
230 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
231 | #define CONFIG_CMD_PCI | |
232 | ||
233 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
234 | #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ | |
235 | ||
236 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 | |
237 | #ifdef CONFIG_PHYS_64BIT | |
238 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
239 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull | |
240 | #else | |
241 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 | |
242 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 | |
243 | #endif | |
244 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
245 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 | |
246 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
247 | #ifdef CONFIG_PHYS_64BIT | |
248 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull | |
249 | #else | |
250 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 | |
251 | #endif | |
252 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
253 | ||
254 | /* | |
255 | * SATA | |
256 | */ | |
257 | #define CONFIG_LIBATA | |
258 | #define CONFIG_LBA48 | |
259 | #define CONFIG_CMD_SATA | |
260 | ||
261 | #define CONFIG_FSL_SATA | |
262 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 | |
263 | #define CONFIG_SATA1 | |
264 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
265 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
266 | #define CONFIG_SATA2 | |
267 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
268 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
269 | ||
270 | /* | |
271 | * Ethernet | |
272 | */ | |
273 | #define CONFIG_TSEC_ENET | |
274 | ||
275 | #define CONFIG_TSECV2 | |
276 | ||
277 | #define CONFIG_MII /* MII PHY management */ | |
278 | #define CONFIG_TSEC1 1 | |
279 | #define CONFIG_TSEC1_NAME "eTSEC1" | |
280 | #define CONFIG_TSEC2 1 | |
281 | #define CONFIG_TSEC2_NAME "eTSEC2" | |
282 | ||
283 | #define TSEC1_PHY_ADDR 0 | |
284 | #define TSEC2_PHY_ADDR 1 | |
285 | ||
286 | #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
287 | #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
288 | ||
289 | #define TSEC1_PHYIDX 0 | |
290 | #define TSEC2_PHYIDX 0 | |
291 | ||
292 | #define CONFIG_ETHPRIME "eTSEC1" | |
293 | ||
294 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
295 | ||
296 | /* | |
297 | * USB | |
298 | */ | |
299 | #define CONFIG_USB_EHCI | |
b9944a77 DE |
300 | |
301 | #define CONFIG_HAS_FSL_DR_USB | |
302 | #define CONFIG_USB_EHCI_FSL | |
303 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
304 | ||
305 | #endif /* CONFIG_TRAILBLAZER */ | |
306 | ||
307 | /* | |
308 | * Environment | |
309 | */ | |
310 | #if defined(CONFIG_TRAILBLAZER) | |
311 | #define CONFIG_ENV_IS_NOWHERE | |
312 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
b9944a77 DE |
313 | #elif defined(CONFIG_RAMBOOT_SPIFLASH) |
314 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
315 | #define CONFIG_ENV_SPI_BUS 0 | |
316 | #define CONFIG_ENV_SPI_CS 0 | |
317 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
318 | #define CONFIG_ENV_SPI_MODE 0 | |
319 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
320 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
321 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
322 | #elif defined(CONFIG_RAMBOOT_SDCARD) | |
323 | #define CONFIG_ENV_IS_IN_MMC | |
324 | #define CONFIG_FSL_FIXED_MMC_LOCATION | |
325 | #define CONFIG_ENV_SIZE 0x2000 | |
326 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
327 | #endif | |
328 | ||
329 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
330 | ||
b9944a77 DE |
331 | /* |
332 | * Command line configuration. | |
333 | */ | |
334 | #ifndef CONFIG_TRAILBLAZER | |
b9944a77 DE |
335 | #define CONFIG_SYS_LONGHELP |
336 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
337 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
338 | #endif /* CONFIG_TRAILBLAZER */ | |
339 | ||
340 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
b9944a77 DE |
341 | #ifdef CONFIG_CMD_KGDB |
342 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
343 | #else | |
344 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
345 | #endif | |
346 | /* Print Buffer Size */ | |
347 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) | |
348 | #define CONFIG_SYS_MAXARGS 16 | |
349 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
350 | ||
b9944a77 DE |
351 | #ifndef CONFIG_TRAILBLAZER |
352 | ||
b9944a77 | 353 | #define CONFIG_CMD_ERRATA |
b9944a77 | 354 | #define CONFIG_CMD_IRQ |
b9944a77 DE |
355 | #define CONFIG_CMD_REGINFO |
356 | ||
357 | /* | |
358 | * Board initialisation callbacks | |
359 | */ | |
b9944a77 DE |
360 | #define CONFIG_BOARD_EARLY_INIT_R |
361 | #define CONFIG_MISC_INIT_R | |
362 | #define CONFIG_LAST_STAGE_INIT | |
363 | ||
b9944a77 DE |
364 | #else /* CONFIG_TRAILBLAZER */ |
365 | ||
b9944a77 DE |
366 | #define CONFIG_BOARD_EARLY_INIT_R |
367 | #define CONFIG_LAST_STAGE_INIT | |
b9944a77 DE |
368 | |
369 | #endif /* CONFIG_TRAILBLAZER */ | |
370 | ||
371 | /* | |
372 | * Miscellaneous configurable options | |
373 | */ | |
b9944a77 DE |
374 | #define CONFIG_HW_WATCHDOG |
375 | #define CONFIG_LOADS_ECHO | |
376 | #define CONFIG_SYS_LOADS_BAUD_CHANGE | |
377 | #define CONFIG_DOS_PARTITION | |
378 | ||
379 | /* | |
380 | * For booting Linux, the board info and command line data | |
381 | * have to be in the first 64 MB of memory, since this is | |
382 | * the maximum mapped by the Linux kernel during initialization. | |
383 | */ | |
384 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */ | |
385 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
386 | ||
387 | /* | |
388 | * Environment Configuration | |
389 | */ | |
390 | ||
391 | #ifdef CONFIG_TRAILBLAZER | |
392 | ||
b9944a77 DE |
393 | #define CONFIG_BAUDRATE 115200 |
394 | ||
395 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
396 | "mp_holdoff=1\0" | |
397 | ||
398 | #else | |
399 | ||
400 | #define CONFIG_HOSTNAME controlcenterd | |
401 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
402 | #define CONFIG_BOOTFILE "uImage" | |
403 | #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */ | |
404 | ||
405 | #define CONFIG_LOADADDR 1000000 | |
406 | ||
b9944a77 DE |
407 | |
408 | #define CONFIG_BAUDRATE 115200 | |
409 | ||
410 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
411 | "netdev=eth0\0" \ | |
412 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
413 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ | |
414 | "tftpflash=tftpboot $loadaddr $uboot && " \ | |
415 | "protect off $ubootaddr +$filesize && " \ | |
416 | "erase $ubootaddr +$filesize && " \ | |
417 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
418 | "protect on $ubootaddr +$filesize && " \ | |
419 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
420 | "consoledev=ttyS1\0" \ | |
421 | "ramdiskaddr=2000000\0" \ | |
422 | "ramdiskfile=rootfs.ext2.gz.uboot\0" \ | |
b24a4f62 | 423 | "fdtaddr=1e00000\0" \ |
b9944a77 DE |
424 | "fdtfile=controlcenterd.dtb\0" \ |
425 | "bdev=sda3\0" | |
426 | ||
427 | /* these are used and NUL-terminated in env_default.h */ | |
428 | #define CONFIG_NFSBOOTCOMMAND \ | |
429 | "setenv bootargs root=/dev/nfs rw " \ | |
430 | "nfsroot=$serverip:$rootpath " \ | |
431 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
432 | "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ | |
433 | "tftp $loadaddr $bootfile;" \ | |
434 | "tftp $fdtaddr $fdtfile;" \ | |
435 | "bootm $loadaddr - $fdtaddr" | |
436 | ||
437 | #define CONFIG_RAMBOOTCOMMAND \ | |
438 | "setenv bootargs root=/dev/ram rw " \ | |
439 | "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ | |
440 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
441 | "tftp $loadaddr $bootfile;" \ | |
442 | "tftp $fdtaddr $fdtfile;" \ | |
443 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
444 | ||
445 | #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND | |
446 | ||
447 | #endif /* CONFIG_TRAILBLAZER */ | |
448 | ||
449 | #endif |