[people/ms/u-boot.git] / include / configs / controlcenterd.h

/*
 * (C) Copyright 2013
 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
 *
 * based on P1022DS.h
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#ifdef CONFIG_36BIT
#define CONFIG_PHYS_64BIT
#endif

#ifdef CONFIG_SDCARD
#define CONFIG_RAMBOOT_SDCARD
#endif

#ifdef CONFIG_SPIFLASH
#define CONFIG_RAMBOOT_SPIFLASH
#endif

/* High Level Configuration Options */
#define CONFIG_BOOKE			/* BOOKE */
#define CONFIG_E500			/* BOOKE e500 family */
#define CONFIG_P1022
#define CONFIG_CONTROLCENTERD
#define CONFIG_MP			/* support multiple processors */

#define CONFIG_SYS_GENERIC_BOARD

#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENABLE_36BIT_PHYS
#define CONFIG_FSL_LAW			/* Use common FSL init code */

#ifdef CONFIG_TRAILBLAZER
#define CONFIG_IDENT_STRING	" controlcenterd trailblazer 0.01"
#else
#define CONFIG_IDENT_STRING	" controlcenterd 0.01"
#endif

#ifdef CONFIG_PHYS_64BIT
#define CONFIG_ADDR_MAP
#define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
#endif

#define CONFIG_L2_CACHE
#define CONFIG_BTB

#define CONFIG_SYS_CLK_FREQ	66666600
#define CONFIG_DDR_CLK_FREQ	66666600

#define CONFIG_SYS_RAMBOOT

#ifdef CONFIG_TRAILBLAZER

#define CONFIG_SYS_TEXT_BASE		0xf8fc0000
#define CONFIG_RESET_VECTOR_ADDRESS	0xf8fffffc
#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)

/*
 * Config the L2 Cache
 */
#define CONFIG_SYS_INIT_L2_ADDR		0xf8fc0000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_INIT_L2_ADDR_PHYS	0xff8fc0000ull
#else
#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
#endif
#define CONFIG_SYS_L2_SIZE		(256 << 10)
#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)

#else /* CONFIG_TRAILBLAZER */

#define CONFIG_SYS_TEXT_BASE		0x11000000
#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)

#endif /* CONFIG_TRAILBLAZER */

#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)


/*
 * Memory map
 *
 * 0x0000_0000	0x3fff_ffff	DDR			1G Cacheable
 * 0xc000_0000	0xdfff_ffff	PCI Express Mem		512M non-cacheable
 * 0xffc0_0000	0xffc2_ffff	PCI IO range		192K non-cacheable
 *
 * Localbus non-cacheable
 * 0xe000_0000	0xe00f_ffff	eLBC			1M non-cacheable
 * 0xf8fc0000	0xf8ff_ffff	L2 SRAM			256k Cacheable
 * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K Cacheable TLB0
 * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable
 */

#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* Initial L1 address */
#define CONFIG_SYS_INIT_RAM_SIZE	0x00004000 /* used area in RAM */
#define CONFIG_SYS_GBL_DATA_OFFSET	\
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#ifdef CONFIG_TRAILBLAZER
/* leave CCSRBAR at default, because u-boot expects it to be exactly there */
#define CONFIG_SYS_CCSRBAR		CONFIG_SYS_CCSRBAR_DEFAULT
#else
#define CONFIG_SYS_CCSRBAR		0xffe00000
#endif
#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
#define CONFIG_SYS_MPC85xx_GPIO3_ADDR	(CONFIG_SYS_CCSRBAR+0xf200)

/*
 * DDR Setup
 */

#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_SDRAM_SIZE 1024
#define CONFIG_VERY_BIG_RAM

#define CONFIG_SYS_FSL_DDR3
#define CONFIG_NUM_DDR_CONTROLLERS	1
#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)

#define CONFIG_SYS_MEMTEST_START	0x00000000
#define CONFIG_SYS_MEMTEST_END		0x3fffffff

#ifdef CONFIG_TRAILBLAZER
#define CONFIG_SPD_EEPROM
#define SPD_EEPROM_ADDRESS 0x52
/*#define CONFIG_FSL_DDR_INTERACTIVE*/
#endif

/*
 * Local Bus Definitions
 */
#define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */

#define CONFIG_SYS_ELBC_BASE		0xe0000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_ELBC_BASE_PHYS	0xfe0000000ull
#else
#define CONFIG_SYS_ELBC_BASE_PHYS	CONFIG_SYS_ELBC_BASE
#endif

#define CONFIG_UART_BR_PRELIM  \
	(BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V)
#define CONFIG_UART_OR_PRELIM	(OR_AM_32KB | 0xff7)

#define CONFIG_SYS_BR0_PRELIM	0 /* CS0 was originally intended for FPGA */
#define CONFIG_SYS_OR0_PRELIM	0 /* debugging, was never used */

#define CONFIG_SYS_BR1_PRELIM	CONFIG_UART_BR_PRELIM
#define CONFIG_SYS_OR1_PRELIM	CONFIG_UART_OR_PRELIM

/*
 * Serial Port
 */
#define CONFIG_CONS_INDEX		2
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)

#define CONFIG_SYS_BAUDRATE_TABLE	\
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)

/*
 * I2C
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED	400000
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
#define CONFIG_SYS_FSL_I2C2_SPEED	400000
#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100

#ifndef CONFIG_TRAILBLAZER
#define CONFIG_CMD_I2C
#endif

#define CONFIG_PCA9698			/* NXP PCA9698 */

#define CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2

#ifndef CONFIG_TRAILBLAZER
/*
 * eSPI - Enhanced SPI
 */
#define CONFIG_HARD_SPI
#define CONFIG_FSL_ESPI

#define CONFIG_SPI_FLASH_STMICRO

#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED		10000000
#define CONFIG_SF_DEFAULT_MODE		0
#endif

#define CONFIG_SHA1

/*
 * MMC
 */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_MMC

#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR


#ifndef CONFIG_TRAILBLAZER

/*
 * Video
 */
#define CONFIG_FSL_DIU_FB
#define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x10000)
#define CONFIG_VIDEO
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_CMD_BMP

/*
 * General PCI
 * Memory space is mapped 1-1, but I/O space must start from 0.
 */
#define CONFIG_PCI			/* Enable PCI/PCIE */
#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP			/* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
#define CONFIG_CMD_PCI

#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
#define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */

#define CONFIG_SYS_PCIE1_MEM_VIRT	0xc0000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc40000000ull
#else
#define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc0000000
#endif
#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc20000
#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc20000ull
#else
#define CONFIG_SYS_PCIE1_IO_PHYS	0xffc20000
#endif
#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */

/*
 * SATA
 */
#define CONFIG_LIBATA
#define CONFIG_LBA48
#define CONFIG_CMD_SATA

#define CONFIG_FSL_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE	2
#define CONFIG_SATA1
#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
#define CONFIG_SATA2
#define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA

/*
 * Ethernet
 */
#define CONFIG_TSEC_ENET

#define CONFIG_TSECV2

#define CONFIG_MII			/* MII PHY management */
#define CONFIG_TSEC1		1
#define CONFIG_TSEC1_NAME	"eTSEC1"
#define CONFIG_TSEC2		1
#define CONFIG_TSEC2_NAME	"eTSEC2"

#define TSEC1_PHY_ADDR		0
#define TSEC2_PHY_ADDR		1

#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)

#define TSEC1_PHYIDX		0
#define TSEC2_PHYIDX		0

#define CONFIG_ETHPRIME		"eTSEC1"

#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */

/*
 * USB
 */
#define CONFIG_USB_EHCI
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE

#define CONFIG_HAS_FSL_DR_USB
#define CONFIG_USB_EHCI_FSL
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

#endif /* CONFIG_TRAILBLAZER */

/*
 * Environment
 */
#if defined(CONFIG_TRAILBLAZER)
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_SIZE		0x2000		/* 8KB */
#elif defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SPI_BUS	0
#define CONFIG_ENV_SPI_CS	0
#define CONFIG_ENV_SPI_MAX_HZ	10000000
#define CONFIG_ENV_SPI_MODE	0
#define CONFIG_ENV_SIZE		0x2000		/* 8KB */
#define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
#define CONFIG_ENV_SECT_SIZE	0x10000
#elif defined(CONFIG_RAMBOOT_SDCARD)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_FSL_FIXED_MMC_LOCATION
#define CONFIG_ENV_SIZE		0x2000
#define CONFIG_SYS_MMC_ENV_DEV	0
#endif

#define CONFIG_SYS_EXTRA_ENV_RELOC

#define CONFIG_SYS_CONSOLE_IS_IN_ENV

/*
 * Command line configuration.
 */
#ifndef CONFIG_TRAILBLAZER
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
#endif /* CONFIG_TRAILBLAZER */

#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
#endif
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	16
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE

#ifndef CONFIG_TRAILBLAZER

#define CONFIG_CMD_ELF
#define CONFIG_CMD_ERRATA
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO

/*
 * Board initialisation callbacks
 */
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_MISC_INIT_R
#define CONFIG_LAST_STAGE_INIT

/*
 * Pass open firmware flat tree
 */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_STDOUT_VIA_ALIAS

/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE

#else /* CONFIG_TRAILBLAZER */

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_LAST_STAGE_INIT

#endif /* CONFIG_TRAILBLAZER */

/*
 * Miscellaneous configurable options
 */
#define CONFIG_HW_WATCHDOG
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_DOS_PARTITION

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 64 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Linux Memory map */
#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */

/*
 * Environment Configuration
 */

#ifdef CONFIG_TRAILBLAZER

#define CONFIG_BOOTDELAY	0	/* -1 disables auto-boot */
#define CONFIG_BAUDRATE	115200

#define	CONFIG_EXTRA_ENV_SETTINGS				\
	"mp_holdoff=1\0"

#else

#define CONFIG_HOSTNAME		controlcenterd
#define CONFIG_ROOTPATH		"/opt/nfsroot"
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP */

#define CONFIG_LOADADDR		1000000

#define CONFIG_BOOTDELAY	10	/* -1 disables auto-boot */

#define CONFIG_BAUDRATE	115200

#define	CONFIG_EXTRA_ENV_SETTINGS				\
	"netdev=eth0\0"						\
	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"	\
	"tftpflash=tftpboot $loadaddr $uboot && "		\
		"protect off $ubootaddr +$filesize && "		\
		"erase $ubootaddr +$filesize && "		\
		"cp.b $loadaddr $ubootaddr $filesize && "	\
		"protect on $ubootaddr +$filesize && "		\
		"cmp.b $loadaddr $ubootaddr $filesize\0"	\
	"consoledev=ttyS1\0"					\
	"ramdiskaddr=2000000\0"					\
	"ramdiskfile=rootfs.ext2.gz.uboot\0"			\
	"fdtaddr=c00000\0"					\
	"fdtfile=controlcenterd.dtb\0"				\
	"bdev=sda3\0"

/* these are used and NUL-terminated in env_default.h */
#define CONFIG_NFSBOOTCOMMAND						\
	"setenv bootargs root=/dev/nfs rw "				\
	"nfsroot=$serverip:$rootpath "					\
	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	"console=$consoledev,$baudrate $othbootargs $videobootargs;"	\
	"tftp $loadaddr $bootfile;"					\
	"tftp $fdtaddr $fdtfile;"					\
	"bootm $loadaddr - $fdtaddr"

#define CONFIG_RAMBOOTCOMMAND						\
	"setenv bootargs root=/dev/ram rw "				\
	"console=$consoledev,$baudrate $othbootargs $videobootargs;"	\
	"tftp $ramdiskaddr $ramdiskfile;"				\
	"tftp $loadaddr $bootfile;"					\
	"tftp $fdtaddr $fdtfile;"					\
	"bootm $loadaddr $ramdiskaddr $fdtaddr"

#define CONFIG_BOOTCOMMAND		CONFIG_RAMBOOTCOMMAND

#endif /* CONFIG_TRAILBLAZER */

#endif
Commit	Line	Data
b9944a77 DE	1	/*
	2	* (C) Copyright 2013
	3	* Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
	4	*
	5	* based on P1022DS.h
	6	*
	7	* See file CREDITS for list of people who contributed to this
	8	* project.
	9	*
	10	* This program is free software; you can redistribute it and/or
	11	* modify it under the terms of the GNU General Public License as
	12	* published by the Free Software Foundation; either version 2 of
	13	* the License, or (at your option) any later version.
	14	*
	15	* This program is distributed in the hope that it will be useful,
	16	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	17	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	18	* GNU General Public License for more details.
	19	*
	20	* You should have received a copy of the GNU General Public License
	21	* along with this program; if not, write to the Free Software
	22	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	23	* MA 02111-1307 USA
	24	*/
	25
	26	#ifndef __CONFIG_H
	27	#define __CONFIG_H
	28
	29	#ifdef CONFIG_36BIT
	30	#define CONFIG_PHYS_64BIT
	31	#endif
	32
	33	#ifdef CONFIG_SDCARD
	34	#define CONFIG_RAMBOOT_SDCARD
	35	#endif
	36
	37	#ifdef CONFIG_SPIFLASH
	38	#define CONFIG_RAMBOOT_SPIFLASH
	39	#endif
	40
	41	/* High Level Configuration Options */
	42	#define CONFIG_BOOKE /* BOOKE */
	43	#define CONFIG_E500 /* BOOKE e500 family */
b9944a77 DE	44	#define CONFIG_P1022
	45	#define CONFIG_CONTROLCENTERD
	46	#define CONFIG_MP /* support multiple processors */
	47
d9f923ff DE	48	#define CONFIG_SYS_GENERIC_BOARD
d9f923ff DE	49
b9944a77 DE	50	#define CONFIG_SYS_NO_FLASH
	51	#define CONFIG_ENABLE_36BIT_PHYS
	52	#define CONFIG_FSL_LAW /* Use common FSL init code */
	53
	54	#ifdef CONFIG_TRAILBLAZER
	55	#define CONFIG_IDENT_STRING " controlcenterd trailblazer 0.01"
	56	#else
	57	#define CONFIG_IDENT_STRING " controlcenterd 0.01"
	58	#endif
	59
	60	#ifdef CONFIG_PHYS_64BIT
	61	#define CONFIG_ADDR_MAP
	62	#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
	63	#endif
	64
	65	#define CONFIG_L2_CACHE
	66	#define CONFIG_BTB
	67
	68	#define CONFIG_SYS_CLK_FREQ 66666600
	69	#define CONFIG_DDR_CLK_FREQ 66666600
	70
	71	#define CONFIG_SYS_RAMBOOT
	72
	73	#ifdef CONFIG_TRAILBLAZER
	74
	75	#define CONFIG_SYS_TEXT_BASE 0xf8fc0000
	76	#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc
	77	#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
	78
	79	/*
	80	* Config the L2 Cache
	81	*/
	82	#define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000
	83	#ifdef CONFIG_PHYS_64BIT
	84	#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull
	85	#else
	86	#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
	87	#endif
	88	#define CONFIG_SYS_L2_SIZE (256 << 10)
	89	#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
	90
	91	#else /* CONFIG_TRAILBLAZER */
	92
	93	#define CONFIG_SYS_TEXT_BASE 0x11000000
	94	#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
	95	#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
	96
	97	#endif /* CONFIG_TRAILBLAZER */
	98
	99	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	100	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	101
	102
	103	/*
	104	* Memory map
	105	*
	106	* 0x0000_0000 0x3fff_ffff DDR 1G Cacheable
	107	* 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable
	108	* 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable
	109	*
	110	* Localbus non-cacheable
	111	* 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable
	112	* 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable
	113	* 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
114	* 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
115	*/
116
117	#define CONFIG_SYS_INIT_RAM_LOCK
118	#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
119	#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */
120	#define CONFIG_SYS_GBL_DATA_OFFSET \
121	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
122	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
123
124	#ifdef CONFIG_TRAILBLAZER
125	/* leave CCSRBAR at default, because u-boot expects it to be exactly there */
126	#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT
127	#else
128	#define CONFIG_SYS_CCSRBAR 0xffe00000
129	#endif
130	#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
131	#define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200)
132
133	/*
134	* DDR Setup
135	*/
136
137	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
138	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
139	#define CONFIG_SYS_SDRAM_SIZE 1024
140	#define CONFIG_VERY_BIG_RAM
141
5614e71b	142	#define CONFIG_SYS_FSL_DDR3
b9944a77 DE	143	#define CONFIG_NUM_DDR_CONTROLLERS 1
	144	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	145	#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
	146
	147	#define CONFIG_SYS_MEMTEST_START 0x00000000
	148	#define CONFIG_SYS_MEMTEST_END 0x3fffffff
	149
	150	#ifdef CONFIG_TRAILBLAZER
	151	#define CONFIG_SPD_EEPROM
	152	#define SPD_EEPROM_ADDRESS 0x52
	153	/#define CONFIG_FSL_DDR_INTERACTIVE/
	154	#endif
	155
	156	/*
	157	* Local Bus Definitions
	158	*/
	159	#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
	160
	161	#define CONFIG_SYS_ELBC_BASE 0xe0000000
	162	#ifdef CONFIG_PHYS_64BIT
	163	#define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull
	164	#else
	165	#define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE
	166	#endif
	167
	168	#define CONFIG_UART_BR_PRELIM \
	169	(BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) \| BR_PS_8 \| BR_V)
	170	#define CONFIG_UART_OR_PRELIM (OR_AM_32KB \| 0xff7)
	171
	172	#define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */
	173	#define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */
	174
	175	#define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM
	176	#define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM
	177
	178	/*
	179	* Serial Port
	180	*/
	181	#define CONFIG_CONS_INDEX 2
	182	#define CONFIG_SYS_NS16550
	183	#define CONFIG_SYS_NS16550_SERIAL
	184	#define CONFIG_SYS_NS16550_REG_SIZE 1
	185	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
	186
	187	#define CONFIG_SYS_BAUDRATE_TABLE \
	188	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
	189
	190	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
	191	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
	192
	193	/*
	194	* I2C
	195	*/
00f792e0 HS	196	#define CONFIG_SYS_I2C
	197	#define CONFIG_SYS_I2C_FSL
	198	#define CONFIG_SYS_FSL_I2C_SPEED 400000
	199	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	200	#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
	201	#define CONFIG_SYS_FSL_I2C2_SPEED 400000
	202	#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
	203	#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
5568fb44 DE	204
	205	#ifndef CONFIG_TRAILBLAZER
	206	#define CONFIG_CMD_I2C
	207	#endif
b9944a77 DE	208
	209	#define CONFIG_PCA9698 /* NXP PCA9698 */
	210
	211	#define CONFIG_CMD_EEPROM
	212	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
	213	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	214
	215	#ifndef CONFIG_TRAILBLAZER
	216	/*
	217	* eSPI - Enhanced SPI
	218	*/
	219	#define CONFIG_HARD_SPI
	220	#define CONFIG_FSL_ESPI
	221
b9944a77 DE	222	#define CONFIG_SPI_FLASH_STMICRO
	223
	224	#define CONFIG_CMD_SF
	225	#define CONFIG_SF_DEFAULT_SPEED 10000000
	226	#define CONFIG_SF_DEFAULT_MODE 0
	227	#endif
	228
b9944a77	229	#define CONFIG_SHA1
b9944a77 DE	230
	231	/*
	232	* MMC
	233	*/
	234	#define CONFIG_MMC
	235	#define CONFIG_GENERIC_MMC
	236	#define CONFIG_CMD_MMC
	237
	238	#define CONFIG_FSL_ESDHC
	239	#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
	240
	241
	242	#ifndef CONFIG_TRAILBLAZER
	243
	244	/*
	245	* Video
	246	*/
	247	#define CONFIG_FSL_DIU_FB
	248	#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000)
	249	#define CONFIG_VIDEO
	250	#define CONFIG_CFB_CONSOLE
	251	#define CONFIG_VGA_AS_SINGLE_DEVICE
	252	#define CONFIG_CMD_BMP
	253
	254	/*
	255	* General PCI
	256	* Memory space is mapped 1-1, but I/O space must start from 0.
	257	*/
	258	#define CONFIG_PCI /* Enable PCI/PCIE */
	259	#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
	260	#define CONFIG_PCI_INDIRECT_BRIDGE
	261	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	262	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	263	#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
	264	#define CONFIG_CMD_PCI
	265
	266	#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
	267	#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
	268
	269	#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000
	270	#ifdef CONFIG_PHYS_64BIT
	271	#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
	272	#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull
	273	#else
	274	#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000
	275	#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000
	276	#endif
	277	#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
	278	#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000
	279	#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
	280	#ifdef CONFIG_PHYS_64BIT
	281	#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull
	282	#else
	283	#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000
	284	#endif
	285	#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
	286
	287	/*
	288	* SATA
	289	*/
	290	#define CONFIG_LIBATA
	291	#define CONFIG_LBA48
	292	#define CONFIG_CMD_SATA
	293
294	#define CONFIG_FSL_SATA
295	#define CONFIG_SYS_SATA_MAX_DEVICE 2
296	#define CONFIG_SATA1
297	#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
298	#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
299	#define CONFIG_SATA2
300	#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
301	#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
302
303	/*
304	* Ethernet
305	*/
306	#define CONFIG_TSEC_ENET
307
308	#define CONFIG_TSECV2
309
310	#define CONFIG_MII /* MII PHY management */
311	#define CONFIG_TSEC1 1
312	#define CONFIG_TSEC1_NAME "eTSEC1"
313	#define CONFIG_TSEC2 1
314	#define CONFIG_TSEC2_NAME "eTSEC2"
315
316	#define TSEC1_PHY_ADDR 0
317	#define TSEC2_PHY_ADDR 1
318
319	#define TSEC1_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
320	#define TSEC2_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
321
322	#define TSEC1_PHYIDX 0
323	#define TSEC2_PHYIDX 0
324
325	#define CONFIG_ETHPRIME "eTSEC1"
326
327	#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
328
329	/*
330	* USB
331	*/
332	#define CONFIG_USB_EHCI
333	#define CONFIG_CMD_USB
334	#define CONFIG_USB_STORAGE
335
336	#define CONFIG_HAS_FSL_DR_USB
337	#define CONFIG_USB_EHCI_FSL
338	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
339
340	#endif /* CONFIG_TRAILBLAZER */
341
342	/*
343	* Environment
344	*/
345	#if defined(CONFIG_TRAILBLAZER)
346	#define CONFIG_ENV_IS_NOWHERE
347	#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
b9944a77 DE	348	#elif defined(CONFIG_RAMBOOT_SPIFLASH)
	349	#define CONFIG_ENV_IS_IN_SPI_FLASH
	350	#define CONFIG_ENV_SPI_BUS 0
	351	#define CONFIG_ENV_SPI_CS 0
	352	#define CONFIG_ENV_SPI_MAX_HZ 10000000
	353	#define CONFIG_ENV_SPI_MODE 0
	354	#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
	355	#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
	356	#define CONFIG_ENV_SECT_SIZE 0x10000
	357	#elif defined(CONFIG_RAMBOOT_SDCARD)
	358	#define CONFIG_ENV_IS_IN_MMC
	359	#define CONFIG_FSL_FIXED_MMC_LOCATION
	360	#define CONFIG_ENV_SIZE 0x2000
	361	#define CONFIG_SYS_MMC_ENV_DEV 0
	362	#endif
	363
	364	#define CONFIG_SYS_EXTRA_ENV_RELOC
	365
	366	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	367
	368	/*
	369	* Command line configuration.
	370	*/
	371	#ifndef CONFIG_TRAILBLAZER
	372	#define CONFIG_SYS_HUSH_PARSER
	373	#define CONFIG_SYS_LONGHELP
	374	#define CONFIG_CMDLINE_EDITING /* Command-line editing */
	375	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
	376	#endif /* CONFIG_TRAILBLAZER */
	377
	378	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
b9944a77 DE	379	#ifdef CONFIG_CMD_KGDB
	380	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	381	#else
	382	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	383	#endif
	384	/* Print Buffer Size */
	385	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	386	#define CONFIG_SYS_MAXARGS 16
	387	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	388
b9944a77 DE	389	#ifndef CONFIG_TRAILBLAZER
	390
	391	#define CONFIG_CMD_ELF
	392	#define CONFIG_CMD_ERRATA
	393	#define CONFIG_CMD_EXT2
	394	#define CONFIG_CMD_FAT
	395	#define CONFIG_CMD_IRQ
	396	#define CONFIG_CMD_MII
b9944a77	397	#define CONFIG_CMD_PING
b9944a77 DE	398	#define CONFIG_CMD_REGINFO
	399
	400	/*
	401	* Board initialisation callbacks
	402	*/
	403	#define CONFIG_BOARD_EARLY_INIT_F
	404	#define CONFIG_BOARD_EARLY_INIT_R
	405	#define CONFIG_MISC_INIT_R
	406	#define CONFIG_LAST_STAGE_INIT
	407
	408	/*
	409	* Pass open firmware flat tree
	410	*/
	411	#define CONFIG_OF_LIBFDT
	412	#define CONFIG_OF_BOARD_SETUP
	413	#define CONFIG_OF_STDOUT_VIA_ALIAS
	414
	415	/* new uImage format support */
	416	#define CONFIG_FIT
	417	#define CONFIG_FIT_VERBOSE
	418
	419	#else /* CONFIG_TRAILBLAZER */
	420
	421	#define CONFIG_BOARD_EARLY_INIT_F
	422	#define CONFIG_BOARD_EARLY_INIT_R
	423	#define CONFIG_LAST_STAGE_INIT
b9944a77 DE	424
	425	#endif /* CONFIG_TRAILBLAZER */
	426
	427	/*
	428	* Miscellaneous configurable options
	429	*/
b9944a77 DE	430	#define CONFIG_HW_WATCHDOG
	431	#define CONFIG_LOADS_ECHO
	432	#define CONFIG_SYS_LOADS_BAUD_CHANGE
	433	#define CONFIG_DOS_PARTITION
	434
	435	/*
	436	* For booting Linux, the board info and command line data
	437	* have to be in the first 64 MB of memory, since this is
	438	* the maximum mapped by the Linux kernel during initialization.
	439	*/
	440	#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */
	441	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
	442
	443	/*
	444	* Environment Configuration
	445	*/
	446
	447	#ifdef CONFIG_TRAILBLAZER
	448
	449	#define CONFIG_BOOTDELAY 0 /* -1 disables auto-boot */
	450	#define CONFIG_BAUDRATE 115200
	451
	452	#define CONFIG_EXTRA_ENV_SETTINGS \
	453	"mp_holdoff=1\0"
	454
	455	#else
	456
	457	#define CONFIG_HOSTNAME controlcenterd
	458	#define CONFIG_ROOTPATH "/opt/nfsroot"
	459	#define CONFIG_BOOTFILE "uImage"
	460	#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */
	461
	462	#define CONFIG_LOADADDR 1000000
	463
	464	#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
	465
	466	#define CONFIG_BAUDRATE 115200
	467
	468	#define CONFIG_EXTRA_ENV_SETTINGS \
	469	"netdev=eth0\0" \
	470	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
	471	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
	472	"tftpflash=tftpboot $loadaddr $uboot && " \
	473	"protect off $ubootaddr +$filesize && " \
	474	"erase $ubootaddr +$filesize && " \
	475	"cp.b $loadaddr $ubootaddr $filesize && " \
	476	"protect on $ubootaddr +$filesize && " \
	477	"cmp.b $loadaddr $ubootaddr $filesize\0" \
	478	"consoledev=ttyS1\0" \
	479	"ramdiskaddr=2000000\0" \
	480	"ramdiskfile=rootfs.ext2.gz.uboot\0" \
	481	"fdtaddr=c00000\0" \
	482	"fdtfile=controlcenterd.dtb\0" \
	483	"bdev=sda3\0"
	484
	485	/* these are used and NUL-terminated in env_default.h */
	486	#define CONFIG_NFSBOOTCOMMAND \
	487	"setenv bootargs root=/dev/nfs rw " \
	488	"nfsroot=$serverip:$rootpath " \
	489	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	490	"console=$consoledev,$baudrate $othbootargs $videobootargs;" \
	491	"tftp $loadaddr $bootfile;" \
	492	"tftp $fdtaddr $fdtfile;" \
	493	"bootm $loadaddr - $fdtaddr"
494
495	#define CONFIG_RAMBOOTCOMMAND \
496	"setenv bootargs root=/dev/ram rw " \
497	"console=$consoledev,$baudrate $othbootargs $videobootargs;" \
498	"tftp $ramdiskaddr $ramdiskfile;" \
499	"tftp $loadaddr $bootfile;" \
500	"tftp $fdtaddr $fdtfile;" \
501	"bootm $loadaddr $ramdiskaddr $fdtaddr"
502
503	#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
504
505	#endif /* CONFIG_TRAILBLAZER */
506
507	#endif