[people/ms/u-boot.git] / include / configs / corvus.h

/*
 * Common board functions for siemens AT91SAM9G45 based boards
 * (C) Copyright 2013 Siemens AG
 *
 * Based on:
 * U-Boot file: include/configs/at91sam9m10g45ek.h
 * (C) Copyright 2007-2008
 * Stelian Pop <stelian@popies.net>
 * Lead Tech Design <www.leadtechdesign.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/hardware.h>
#include <linux/sizes.h>

/*
 * Warning: changing CONFIG_SYS_TEXT_BASE requires
 * adapting the initial boot program.
 * Since the linker has to swallow that define, we must use a pure
 * hex number here!
 */

#define CONFIG_SYS_TEXT_BASE  0x72000000

#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */

/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_SLOW_CLOCK      32768
#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO

#define CONFIG_CMD_BOOTZ

/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
#define CONFIG_AT91_GPIO
#define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */

/* serial console */
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
#define CONFIG_USART_ID			ATMEL_ID_SYS

/* LED */
#define CONFIG_AT91_LED
#define CONFIG_RED_LED		AT91_PIN_PD31	/* this is the user1 led */
#define CONFIG_GREEN_LED	AT91_PIN_PD0	/* this is the user2 led */

#define CONFIG_BOOTDELAY	3

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * Command line configuration.
 */
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NAND
#define CONFIG_CMD_USB

/* SDRAM */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
#define CONFIG_SYS_SDRAM_SIZE		0x08000000

#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE)

/* No NOR flash */
#define CONFIG_SYS_NO_FLASH

/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE		1
#define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
#define CONFIG_SYS_NAND_DBW_8
/* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
#endif

/* Ethernet */
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_AT91_WANTS_COMMON_PHY

/* USB */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_ATMEL
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
#define CONFIG_DOS_PARTITION
#define CONFIG_USB_STORAGE

/* USB DFU support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS

#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_ATMEL_USBA

/* DFU class support */
#define CONFIG_CMD_DFU
#define CONFIG_USB_FUNCTION_DFU
#define CONFIG_DFU_NAND
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_USB_GADGET_VBUS_DRAW	2
#define CONFIG_SYS_DFU_DATA_BUF_SIZE	(SZ_1M)
#define DFU_MANIFEST_POLL_TIMEOUT	25000

/* USB DFU IDs */
#define CONFIG_G_DNL_VENDOR_NUM 0x0908
#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"

#define CONFIG_SYS_CACHELINE_SIZE	SZ_8K
#define CONFIG_SYS_LOAD_ADDR	ATMEL_BASE_CS6

/* bootstrap + u-boot + env in nandflash */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET		0x100000
#define CONFIG_ENV_OFFSET_REDUND	0x180000
#define CONFIG_ENV_SIZE			SZ_128K

#define CONFIG_BOOTCOMMAND						\
	"nand read 0x70000000 0x200000 0x300000;"			\
	"bootm 0x70000000"
#define CONFIG_BOOTARGS							\
	"console=ttyS0,115200 earlyprintk "				\
	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
	"256k(env),256k(env_redundant),256k(spare),"			\
	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
	"root=/dev/mtdblock7 rw rootfstype=jffs2"

#define CONFIG_BAUDRATE			115200

#define CONFIG_SYS_CBSIZE		256
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE +	\
				 sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_HUSH_PARSER

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + \
				SZ_4M, 0x1000)

/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE		0x300000
#define CONFIG_SPL_MAX_SIZE		(12 * SZ_1K)
#define CONFIG_SPL_STACK		(SZ_16K)

#define CONFIG_SPL_BSS_START_ADDR	CONFIG_SPL_MAX_SIZE
#define CONFIG_SPL_BSS_MAX_SIZE		(SZ_2K)

#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT

#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_ECC
#define CONFIG_SPL_NAND_RAW_ONLY
#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x20000
#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
#define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_5_ADDR_CYCLE

#define CONFIG_SYS_NAND_PAGE_SIZE	SZ_2K
#define CONFIG_SYS_NAND_BLOCK_SIZE	(SZ_128K)
#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
					 CONFIG_SYS_NAND_PAGE_SIZE)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
#define CONFIG_SYS_NAND_ECCSIZE		256
#define CONFIG_SYS_NAND_ECCBYTES	3
#define CONFIG_SYS_NAND_OOBSIZE		64
#define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
					  48, 49, 50, 51, 52, 53, 54, 55, \
					  56, 57, 58, 59, 60, 61, 62, 63, }

#define CONFIG_SPL_ATMEL_SIZE
#define CONFIG_SYS_MASTER_CLOCK		132096000
#define AT91_PLL_LOCK_TIMEOUT		1000000
#define CONFIG_SYS_AT91_PLLA		0x20c73f03
#define CONFIG_SYS_MCKR			0x1301
#define CONFIG_SYS_MCKR_CSS		0x1302

#endif
Commit	Line	Data
b89ac72a HS	1	/*
	2	* Common board functions for siemens AT91SAM9G45 based boards
	3	* (C) Copyright 2013 Siemens AG
	4	*
	5	* Based on:
	6	* U-Boot file: include/configs/at91sam9m10g45ek.h
	7	* (C) Copyright 2007-2008
	8	* Stelian Pop <stelian@popies.net>
	9	* Lead Tech Design <www.leadtechdesign.com>
	10	*
	11	* SPDX-License-Identifier: GPL-2.0+
	12	*/
	13
	14	#ifndef __CONFIG_H
	15	#define __CONFIG_H
	16
	17	#include <asm/hardware.h>
fd45a0d1	18	#include <linux/sizes.h>
b89ac72a	19
b89ac72a HS	20	/*
	21	* Warning: changing CONFIG_SYS_TEXT_BASE requires
	22	* adapting the initial boot program.
	23	* Since the linker has to swallow that define, we must use a pure
	24	* hex number here!
	25	*/
	26
5b15fd98	27	#define CONFIG_SYS_TEXT_BASE 0x72000000
b89ac72a	28
b89ac72a HS	29	#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
	30
	31	/* ARM asynchronous clock */
	32	#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
	33	#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
b89ac72a	34
b89ac72a HS	35	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	36	#define CONFIG_SETUP_MEMORY_TAGS
	37	#define CONFIG_INITRD_TAG
	38	#define CONFIG_SKIP_LOWLEVEL_INIT
	39	#define CONFIG_BOARD_EARLY_INIT_F
	40	#define CONFIG_DISPLAY_CPUINFO
	41
	42	#define CONFIG_CMD_BOOTZ
b89ac72a HS	43
	44	/* general purpose I/O */
	45	#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
	46	#define CONFIG_AT91_GPIO
	47	#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
	48
	49	/* serial console */
	50	#define CONFIG_ATMEL_USART
	51	#define CONFIG_USART_BASE ATMEL_BASE_DBGU
	52	#define CONFIG_USART_ID ATMEL_ID_SYS
	53
	54	/* LED */
	55	#define CONFIG_AT91_LED
	56	#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */
	57	#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */
	58
	59	#define CONFIG_BOOTDELAY 3
	60
	61	/*
	62	* BOOTP options
	63	*/
	64	#define CONFIG_BOOTP_BOOTFILESIZE
	65	#define CONFIG_BOOTP_BOOTPATH
	66	#define CONFIG_BOOTP_GATEWAY
	67	#define CONFIG_BOOTP_HOSTNAME
	68
	69	/*
	70	* Command line configuration.
	71	*/
b89ac72a HS	72	#define CONFIG_CMD_PING
	73	#define CONFIG_CMD_DHCP
	74	#define CONFIG_CMD_NAND
	75	#define CONFIG_CMD_USB
	76
	77	/* SDRAM */
	78	#define CONFIG_NR_DRAM_BANKS 1
	79	#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6
	80	#define CONFIG_SYS_SDRAM_SIZE 0x08000000
	81
	82	#define CONFIG_SYS_INIT_SP_ADDR \
fd45a0d1	83	(CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE)
b89ac72a HS	84
	85	/* No NOR flash */
	86	#define CONFIG_SYS_NO_FLASH
	87
	88	/* NAND flash */
	89	#ifdef CONFIG_CMD_NAND
	90	#define CONFIG_NAND_ATMEL
	91	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	92	#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
	93	#define CONFIG_SYS_NAND_DBW_8
	94	/* our ALE is AD21 */
	95	#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
	96	/* our CLE is AD22 */
	97	#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
	98	#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
a5f8ccae	99	#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
b89ac72a HS	100	#endif
	101
	102	/* Ethernet */
	103	#define CONFIG_MACB
	104	#define CONFIG_RMII
	105	#define CONFIG_NET_RETRY_COUNT 20
	106	#define CONFIG_AT91_WANTS_COMMON_PHY
	107
	108	/* USB */
	109	#define CONFIG_USB_EHCI
	110	#define CONFIG_USB_EHCI_ATMEL
	111	#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
	112	#define CONFIG_DOS_PARTITION
	113	#define CONFIG_USB_STORAGE
	114
e11793bc HS	115	/* USB DFU support */
	116	#define CONFIG_CMD_MTDPARTS
	117	#define CONFIG_MTD_DEVICE
	118	#define CONFIG_MTD_PARTITIONS
	119
	120	#define CONFIG_USB_GADGET
	121	#define CONFIG_USB_GADGET_DUALSPEED
	122	#define CONFIG_USB_GADGET_ATMEL_USBA
	123
	124	/* DFU class support */
	125	#define CONFIG_CMD_DFU
	126	#define CONFIG_USB_FUNCTION_DFU
	127	#define CONFIG_DFU_NAND
	128	#define CONFIG_USB_GADGET_DOWNLOAD
	129	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	130	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M)
	131	#define DFU_MANIFEST_POLL_TIMEOUT 25000
	132
	133	/* USB DFU IDs */
	134	#define CONFIG_G_DNL_VENDOR_NUM 0x0908
	135	#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
	136	#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
	137
	138	#define CONFIG_SYS_CACHELINE_SIZE SZ_8K
	139	#define CONFIG_SYS_LOAD_ADDR ATMEL_BASE_CS6
b89ac72a HS	140
	141	/* bootstrap + u-boot + env in nandflash */
	142	#define CONFIG_ENV_IS_IN_NAND
	143	#define CONFIG_ENV_OFFSET 0x100000
	144	#define CONFIG_ENV_OFFSET_REDUND 0x180000
fd45a0d1	145	#define CONFIG_ENV_SIZE SZ_128K
b89ac72a HS	146
	147	#define CONFIG_BOOTCOMMAND \
	148	"nand read 0x70000000 0x200000 0x300000;" \
	149	"bootm 0x70000000"
	150	#define CONFIG_BOOTARGS \
	151	"console=ttyS0,115200 earlyprintk " \
	152	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
	153	"256k(env),256k(env_redundant),256k(spare)," \
	154	"512k(dtb),6M(kernel)ro,-(rootfs) " \
	155	"root=/dev/mtdblock7 rw rootfstype=jffs2"
	156
	157	#define CONFIG_BAUDRATE 115200
	158
b89ac72a HS	159	#define CONFIG_SYS_CBSIZE 256
	160	#define CONFIG_SYS_MAXARGS 16
	161	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	162	sizeof(CONFIG_SYS_PROMPT) + 16)
	163	#define CONFIG_SYS_LONGHELP
	164	#define CONFIG_CMDLINE_EDITING
	165	#define CONFIG_AUTO_COMPLETE
	166	#define CONFIG_SYS_HUSH_PARSER
	167
	168	/*
	169	* Size of malloc() pool
	170	*/
	171	#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \
fd45a0d1 HS	172	SZ_4M, 0x1000)
fd45a0d1 HS	173
5b15fd98 HS	174	/* Defines for SPL */
	175	#define CONFIG_SPL_FRAMEWORK
	176	#define CONFIG_SPL_TEXT_BASE 0x300000
fd45a0d1 HS	177	#define CONFIG_SPL_MAX_SIZE (12 * SZ_1K)
fd45a0d1 HS	178	#define CONFIG_SPL_STACK (SZ_16K)
5b15fd98 HS	179
5b15fd98 HS	180	#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE
fd45a0d1	181	#define CONFIG_SPL_BSS_MAX_SIZE (SZ_2K)
5b15fd98 HS	182
	183	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	184	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	185	#define CONFIG_SPL_SERIAL_SUPPORT
	186
	187	#define CONFIG_SPL_BOARD_INIT
	188	#define CONFIG_SPL_GPIO_SUPPORT
5b15fd98 HS	189	#define CONFIG_SPL_NAND_SUPPORT
	190	#define CONFIG_SPL_NAND_DRIVERS
	191	#define CONFIG_SPL_NAND_BASE
	192	#define CONFIG_SPL_NAND_ECC
	193	#define CONFIG_SPL_NAND_RAW_ONLY
	194	#define CONFIG_SPL_NAND_SOFTECC
	195	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
	196	#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
	197	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
	198	#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
	199	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	200
fd45a0d1 HS	201	#define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K
fd45a0d1 HS	202	#define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K)
5b15fd98 HS	203	#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
	204	CONFIG_SYS_NAND_PAGE_SIZE)
	205	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	206	#define CONFIG_SYS_NAND_ECCSIZE 256
	207	#define CONFIG_SYS_NAND_ECCBYTES 3
	208	#define CONFIG_SYS_NAND_OOBSIZE 64
	209	#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
	210	48, 49, 50, 51, 52, 53, 54, 55, \
	211	56, 57, 58, 59, 60, 61, 62, 63, }
	212
	213	#define CONFIG_SPL_ATMEL_SIZE
	214	#define CONFIG_SYS_MASTER_CLOCK 132096000
	215	#define AT91_PLL_LOCK_TIMEOUT 1000000
	216	#define CONFIG_SYS_AT91_PLLA 0x20c73f03
	217	#define CONFIG_SYS_MCKR 0x1301
	218	#define CONFIG_SYS_MCKR_CSS 0x1302
	219
b89ac72a	220	#endif