[people/ms/u-boot.git] / include / configs / cyrus.h

/*
 * Based on corenet_ds.h
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_CYRUS

#if !defined(CONFIG_PPC_P5020) && !defined(CONFIG_PPC_P5040)
#error Must call Cyrus CONFIG with a specific CPU enabled.
#endif

#define CONFIG_MMC
#define CONFIG_SDCARD
#define CONFIG_FSL_SATA_V2
#define CONFIG_PCIE3
#define CONFIG_PCIE4
#ifdef CONFIG_PPC_P5020
#define CONFIG_SYS_FSL_RAID_ENGINE
#define CONFIG_SYS_DPAA_RMAN
#endif
#define CONFIG_SYS_DPAA_PME

/*
 * Corenet DS style board configuration file
 */
#define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
#define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
#if defined(CONFIG_PPC_P5020)
#define CONFIG_SYS_CLK_FREQ 133000000
#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
#elif defined(CONFIG_PPC_P5040)
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
#endif

/* High Level Configuration Options */
#define CONFIG_BOOKE
#define CONFIG_E500			/* BOOKE e500 family */
#define CONFIG_E500MC			/* BOOKE e500mc family */
#define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
#define CONFIG_MP			/* support multiple processors */

#define CONFIG_SYS_MMC_MAX_DEVICE     1

#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE	0xeff40000
#endif

#define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
#define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */
#define CONFIG_PCIE1			/* PCIE controller 1 */
#define CONFIG_PCIE2			/* PCIE controller 2 */
#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */

#define CONFIG_FSL_LAW			/* Use common FSL init code */

#define CONFIG_ENV_OVERWRITE

#define CONFIG_SYS_NO_FLASH

#if defined(CONFIG_SDCARD)
#define CONFIG_SYS_EXTRA_ENV_RELOC
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_FSL_FIXED_MMC_LOCATION
#define CONFIG_SYS_MMC_ENV_DEV          0
#define CONFIG_ENV_SIZE			0x2000
#define CONFIG_ENV_OFFSET		(512 * 1658)
#endif

/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_SYS_CACHE_STASHING
#define CONFIG_BACKSIDE_L2_CACHE
#define CONFIG_SYS_INIT_L2CSR0		L2CSR0_L2E
#define CONFIG_BTB			/* toggle branch predition */
#define	CONFIG_DDR_ECC
#ifdef CONFIG_DDR_ECC
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
#endif

#define CONFIG_ENABLE_36BIT_PHYS

#ifdef CONFIG_PHYS_64BIT
#define CONFIG_ADDR_MAP
#define CONFIG_SYS_NUM_ADDR_MAP		64	/* number of TLB1 entries */
#endif

/* test POST memory test */
#undef CONFIG_POST
#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x00400000
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_PANIC_HANG	/* do not reset board on panic */

/*
 *  Config the L3 Cache as L3 SRAM
 */
#define CONFIG_SYS_INIT_L3_ADDR		CONFIG_RAMBOOT_TEXT_BASE
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_INIT_L3_ADDR_PHYS	(0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
#else
#define CONFIG_SYS_INIT_L3_ADDR_PHYS	CONFIG_SYS_INIT_L3_ADDR
#endif
#define CONFIG_SYS_L3_SIZE		(1024 << 10)
#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)

#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_DCSRBAR		0xf0000000
#define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
#endif

/*
 * DDR Setup
 */
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	(4 * CONFIG_DIMM_SLOTS_PER_CTLR)

#define CONFIG_DDR_SPD
#define CONFIG_SYS_FSL_DDR3

#define CONFIG_SYS_SPD_BUS_NUM	1
#define SPD_EEPROM_ADDRESS1	0x51
#define SPD_EEPROM_ADDRESS2	0x52
#define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */

/*
 * Local Bus Definitions
 */

#define CONFIG_SYS_LBC0_BASE		0xe0000000 /* Start of LBC Registers */
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_LBC0_BASE_PHYS	0xfe0000000ull
#else
#define CONFIG_SYS_LBC0_BASE_PHYS	CONFIG_SYS_LBC0_BASE
#endif

#define CONFIG_SYS_LBC1_BASE		0xe1000000 /* Start of LBC Registers */
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_LBC1_BASE_PHYS	0xfe1000000ull
#else
#define CONFIG_SYS_LBC1_BASE_PHYS	CONFIG_SYS_LBC1_BASE
#endif

/* Set the local bus clock 1/16 of platform clock */
#define CONFIG_SYS_LBC_LCRR		(LCRR_CLKDIV_16 | LCRR_EADC_1)

#define CONFIG_SYS_BR0_PRELIM \
(BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V)
#define CONFIG_SYS_BR1_PRELIM \
(BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V)

#define CONFIG_SYS_OR0_PRELIM	0xfff00010
#define CONFIG_SYS_OR1_PRELIM	0xfff00010

#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE	/* start of monitor */

#if defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_SYS_RAMBOOT
#endif

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
#define CONFIG_MISC_INIT_R

#define CONFIG_HWCONFIG

/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
/* The assembler doesn't like typecast */
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
#else
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS	CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
#endif
#define CONFIG_SYS_INIT_RAM_SIZE		0x00004000	/* Size of used area in RAM */

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */

/* Serial Port - controlled on board with jumper J8
 * open - index 2
 * shorted - index 1
 */
#define CONFIG_CONS_INDEX	1
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)

#define CONFIG_SYS_BAUDRATE_TABLE	\
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x11C500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x11C600)
#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR+0x11D500)
#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_FSL_I2C_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_FSL_I2C_SLAVE		0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET		0x118000
#define CONFIG_SYS_FSL_I2C2_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_FSL_I2C2_SLAVE		0x7F
#define CONFIG_SYS_FSL_I2C2_OFFSET		0x118100
#define CONFIG_SYS_FSL_I2C3_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_FSL_I2C3_SLAVE		0x7F
#define CONFIG_SYS_FSL_I2C3_OFFSET		0x119000
#define CONFIG_SYS_FSL_I2C4_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_FSL_I2C4_SLAVE		0x7F
#define CONFIG_SYS_FSL_I2C4_OFFSET		0x119100

#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_SYS_EEPROM_BUS_NUM	0
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57

#define CONFIG_SYS_I2C_GENERIC_MAC
#define CONFIG_SYS_I2C_MAC1_BUS 3
#define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
#define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
#define CONFIG_SYS_I2C_MAC2_BUS 0
#define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
#define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa

#define CONFIG_CMD_DATE			1
#define CONFIG_RTC_MCP79411		1
#define CONFIG_SYS_RTC_BUS_NUM		3
#define CONFIG_SYS_I2C_RTC_ADDR		0x6f

/*
 * eSPI - Enhanced SPI
 */

/*
 * General PCI
 * Memory space is mapped 1-1, but I/O space must start from 0.
 */

/* controller 1, direct to uli, tgtid 3, Base address 20000 */
#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
#else
#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
#define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
#endif
#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE1_IO_VIRT	0xf8000000
#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE1_IO_PHYS	0xff8000000ull
#else
#define CONFIG_SYS_PCIE1_IO_PHYS	0xf8000000
#endif
#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */

/* controller 2, Slot 2, tgtid 2, Base address 201000 */
#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
#else
#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
#endif
#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE2_IO_VIRT	0xf8010000
#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE2_IO_PHYS	0xff8010000ull
#else
#define CONFIG_SYS_PCIE2_IO_PHYS	0xf8010000
#endif
#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */

/* controller 3, Slot 1, tgtid 1, Base address 202000 */
#define CONFIG_SYS_PCIE3_MEM_VIRT	0xc0000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc40000000ull
#else
#define CONFIG_SYS_PCIE3_MEM_BUS	0xc0000000
#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc0000000
#endif
#define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE3_IO_VIRT	0xf8020000
#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE3_IO_PHYS	0xff8020000ull
#else
#define CONFIG_SYS_PCIE3_IO_PHYS	0xf8020000
#endif
#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */

/* controller 4, Base address 203000 */
#define CONFIG_SYS_PCIE4_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE4_MEM_PHYS	0xc60000000ull
#define CONFIG_SYS_PCIE4_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE4_IO_BUS		0x00000000
#define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
#define CONFIG_SYS_PCIE4_IO_SIZE	0x00010000	/* 64k */

/* Qman/Bman */
#define CONFIG_SYS_DPAA_QBMAN		/* Support Q/Bman */
#define CONFIG_SYS_BMAN_NUM_PORTALS	10
#define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
#else
#define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
#endif
#define CONFIG_SYS_BMAN_MEM_SIZE	0x00200000
#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
					 CONFIG_SYS_BMAN_CENA_SIZE)
#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
#define CONFIG_SYS_QMAN_NUM_PORTALS	10
#define CONFIG_SYS_QMAN_MEM_BASE	0xf4200000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_QMAN_MEM_PHYS	0xff4200000ull
#else
#define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
#endif
#define CONFIG_SYS_QMAN_MEM_SIZE	0x00200000
#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
					  CONFIG_SYS_QMAN_CENA_SIZE)
#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08

#define CONFIG_SYS_DPAA_FMAN
/* Default address of microcode for the Linux Fman driver */
/*
 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 */
#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR	(512 * 1680)

#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)

#ifdef CONFIG_SYS_DPAA_FMAN
#define CONFIG_FMAN_ENET
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
#endif

#ifdef CONFIG_PCI
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_PNP			/* do pci plug-and-play */
#define CONFIG_NET_MULTI

#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
#define CONFIG_DOS_PARTITION
#endif	/* CONFIG_PCI */

/* SATA */
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_LIBATA
#define CONFIG_FSL_SATA

#define CONFIG_SYS_SATA_MAX_DEVICE	2
#define CONFIG_SATA1
#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
#define CONFIG_SATA2
#define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA

#define CONFIG_LBA48
#define CONFIG_CMD_SATA
#define CONFIG_DOS_PARTITION
#endif

#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_TBIPA_VALUE	8
#define CONFIG_MII		/* MII PHY management */
#define CONFIG_ETHPRIME		"FM1@DTSEC4"
#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
#endif

/*
 * Environment
 */
#define CONFIG_LOADS_ECHO		/* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */

/*
 * Command line configuration.
 */
#define CONFIG_CMD_ERRATA
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_REGINFO

#ifdef CONFIG_PCI
#define CONFIG_CMD_PCI
#endif

/*
 * USB
 */
#define CONFIG_HAS_FSL_DR_USB
#define CONFIG_HAS_FSL_MPH_USB

#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_FSL
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_EHCI_IS_TDI
#define CONFIG_SYS_USB_EVENT_POLL
 /* _VIA_CONTROL_EP  */
#endif

#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#define CONFIG_GENERIC_MMC
#define CONFIG_DOS_PARTITION
#endif

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 64 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */

#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#endif

/*
 * Environment Configuration
 */
#define CONFIG_ROOTPATH		"/opt/nfsroot"
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */

/* default location for tftp and bootm */
#define CONFIG_LOADADDR		1000000


#define CONFIG_BAUDRATE	115200

#define __USB_PHY_TYPE	utmi

#define	CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:ctlr_intlv=cacheline,"		\
"bank_intlv=cs0_cs1;"					\
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0"						\
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"			\
"consoledev=ttyS0\0"					\
"ramdiskaddr=2000000\0"					\
"fdtaddr=1e00000\0"					\
"bdev=sda3\0"

#define CONFIG_HDBOOT					\
"setenv bootargs root=/dev/$bdev rw "		\
"console=$consoledev,$baudrate $othbootargs;"	\
"tftp $loadaddr $bootfile;"			\
"tftp $fdtaddr $fdtfile;"			\
"bootm $loadaddr - $fdtaddr"

#define CONFIG_NFSBOOTCOMMAND			\
"setenv bootargs root=/dev/nfs rw "	\
"nfsroot=$serverip:$rootpath "		\
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;"	\
"tftp $loadaddr $bootfile;"		\
"tftp $fdtaddr $fdtfile;"		\
"bootm $loadaddr - $fdtaddr"

#define CONFIG_RAMBOOTCOMMAND				\
"setenv bootargs root=/dev/ram rw "		\
"console=$consoledev,$baudrate $othbootargs;"	\
"tftp $ramdiskaddr $ramdiskfile;"		\
"tftp $loadaddr $bootfile;"			\
"tftp $fdtaddr $fdtfile;"			\
"bootm $loadaddr $ramdiskaddr $fdtaddr"

#define CONFIG_BOOTCOMMAND		CONFIG_HDBOOT

#include <asm/fsl_secure_boot.h>

#ifdef CONFIG_SECURE_BOOT
#endif

#endif	/* __CONFIG_H */
Commit	Line	Data
87e29878 AF	1	/*
	2	* Based on corenet_ds.h
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
87e29878 AF	10	#define CONFIG_CYRUS
87e29878 AF	11
87e29878 AF	12	#if !defined(CONFIG_PPC_P5020) && !defined(CONFIG_PPC_P5040)
	13	#error Must call Cyrus CONFIG with a specific CPU enabled.
	14	#endif
	15
87e29878 AF	16	#define CONFIG_MMC
	17	#define CONFIG_SDCARD
	18	#define CONFIG_FSL_SATA_V2
	19	#define CONFIG_PCIE3
	20	#define CONFIG_PCIE4
	21	#ifdef CONFIG_PPC_P5020
	22	#define CONFIG_SYS_FSL_RAID_ENGINE
	23	#define CONFIG_SYS_DPAA_RMAN
	24	#endif
	25	#define CONFIG_SYS_DPAA_PME
	26
	27	/*
	28	* Corenet DS style board configuration file
	29	*/
	30	#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
	31	#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
	32	#define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
	33	#if defined(CONFIG_PPC_P5020)
	34	#define CONFIG_SYS_CLK_FREQ 133000000
	35	#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
	36	#elif defined(CONFIG_PPC_P5040)
	37	#define CONFIG_SYS_CLK_FREQ 100000000
	38	#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
	39	#endif
	40
87e29878 AF	41	/* High Level Configuration Options */
	42	#define CONFIG_BOOKE
	43	#define CONFIG_E500 /* BOOKE e500 family */
	44	#define CONFIG_E500MC /* BOOKE e500mc family */
	45	#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
	46	#define CONFIG_MP /* support multiple processors */
	47
87e29878 AF	48	#define CONFIG_SYS_MMC_MAX_DEVICE 1
	49
	50	#ifndef CONFIG_SYS_TEXT_BASE
	51	#define CONFIG_SYS_TEXT_BASE 0xeff40000
	52	#endif
	53
	54	#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
	55	#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS
	56	#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
b38eaec5 RD	57	#define CONFIG_PCIE1 /* PCIE controller 1 */
b38eaec5 RD	58	#define CONFIG_PCIE2 /* PCIE controller 2 */
87e29878 AF	59	#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
	60	#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
	61
	62	#define CONFIG_FSL_LAW /* Use common FSL init code */
	63
	64	#define CONFIG_ENV_OVERWRITE
	65
	66	#define CONFIG_SYS_NO_FLASH
	67
	68	#if defined(CONFIG_SDCARD)
	69	#define CONFIG_SYS_EXTRA_ENV_RELOC
	70	#define CONFIG_ENV_IS_IN_MMC
	71	#define CONFIG_FSL_FIXED_MMC_LOCATION
	72	#define CONFIG_SYS_MMC_ENV_DEV 0
	73	#define CONFIG_ENV_SIZE 0x2000
	74	#define CONFIG_ENV_OFFSET (512 * 1658)
	75	#endif
	76
	77	/*
	78	* These can be toggled for performance analysis, otherwise use default.
	79	*/
	80	#define CONFIG_SYS_CACHE_STASHING
	81	#define CONFIG_BACKSIDE_L2_CACHE
	82	#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
	83	#define CONFIG_BTB /* toggle branch predition */
	84	#define CONFIG_DDR_ECC
	85	#ifdef CONFIG_DDR_ECC
	86	#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
	87	#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
	88	#endif
	89
	90	#define CONFIG_ENABLE_36BIT_PHYS
	91
	92	#ifdef CONFIG_PHYS_64BIT
	93	#define CONFIG_ADDR_MAP
	94	#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
	95	#endif
	96
	97	/* test POST memory test */
	98	#undef CONFIG_POST
	99	#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
	100	#define CONFIG_SYS_MEMTEST_END 0x00400000
	101	#define CONFIG_SYS_ALT_MEMTEST
	102	#define CONFIG_PANIC_HANG /* do not reset board on panic */
	103
	104	/*
	105	* Config the L3 Cache as L3 SRAM
	106	*/
	107	#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE
	108	#ifdef CONFIG_PHYS_64BIT
	109	#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull \| CONFIG_RAMBOOT_TEXT_BASE)
	110	#else
	111	#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR
	112	#endif
	113	#define CONFIG_SYS_L3_SIZE (1024 << 10)
	114	#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
	115
	116	#ifdef CONFIG_PHYS_64BIT
	117	#define CONFIG_SYS_DCSRBAR 0xf0000000
	118	#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
	119	#endif
	120
	121	/*
	122	* DDR Setup
123	*/
124	#define CONFIG_VERY_BIG_RAM
125	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
126	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
127
128	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
129	#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
130
131	#define CONFIG_DDR_SPD
132	#define CONFIG_SYS_FSL_DDR3
133
134	#define CONFIG_SYS_SPD_BUS_NUM 1
135	#define SPD_EEPROM_ADDRESS1 0x51
136	#define SPD_EEPROM_ADDRESS2 0x52
137	#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
138
139	/*
140	* Local Bus Definitions
141	*/
142
143	#define CONFIG_SYS_LBC0_BASE 0xe0000000 /* Start of LBC Registers */
144	#ifdef CONFIG_PHYS_64BIT
145	#define CONFIG_SYS_LBC0_BASE_PHYS 0xfe0000000ull
146	#else
147	#define CONFIG_SYS_LBC0_BASE_PHYS CONFIG_SYS_LBC0_BASE
148	#endif
149
150	#define CONFIG_SYS_LBC1_BASE 0xe1000000 /* Start of LBC Registers */
151	#ifdef CONFIG_PHYS_64BIT
152	#define CONFIG_SYS_LBC1_BASE_PHYS 0xfe1000000ull
153	#else
154	#define CONFIG_SYS_LBC1_BASE_PHYS CONFIG_SYS_LBC1_BASE
155	#endif
156
157	/* Set the local bus clock 1/16 of platform clock */
158	#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_16 \| LCRR_EADC_1)
159
160	#define CONFIG_SYS_BR0_PRELIM \
161	(BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) \| BR_PS_16 \| BR_V)
162	#define CONFIG_SYS_BR1_PRELIM \
163	(BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) \| BR_PS_16 \| BR_V)
164
165	#define CONFIG_SYS_OR0_PRELIM 0xfff00010
166	#define CONFIG_SYS_OR1_PRELIM 0xfff00010
167
87e29878 AF	168	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
	169
	170	#if defined(CONFIG_RAMBOOT_PBL)
	171	#define CONFIG_SYS_RAMBOOT
	172	#endif
	173
	174	#define CONFIG_BOARD_EARLY_INIT_F
	175	#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
	176	#define CONFIG_MISC_INIT_R
	177
	178	#define CONFIG_HWCONFIG
	179
	180	/* define to use L1 as initial stack */
	181	#define CONFIG_L1_INIT_RAM
	182	#define CONFIG_SYS_INIT_RAM_LOCK
	183	#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
	184	#ifdef CONFIG_PHYS_64BIT
	185	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
	186	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
	187	/* The assembler doesn't like typecast */
	188	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
	189	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) \| \
	190	CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
	191	#else
	192	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
	193	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
	194	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
	195	#endif
	196	#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */
	197
	198	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	199	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	200
	201	#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
	202	#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
	203
	204	/* Serial Port - controlled on board with jumper J8
	205	* open - index 2
	206	* shorted - index 1
	207	*/
	208	#define CONFIG_CONS_INDEX 1
87e29878 AF	209	#define CONFIG_SYS_NS16550_SERIAL
	210	#define CONFIG_SYS_NS16550_REG_SIZE 1
	211	#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
	212
	213	#define CONFIG_SYS_BAUDRATE_TABLE \
	214	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
	215
	216	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
	217	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
	218	#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
	219	#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
	220
87e29878 AF	221	/* I2C */
	222	#define CONFIG_SYS_I2C
	223	#define CONFIG_SYS_I2C_FSL
	224	#define CONFIG_I2C_MULTI_BUS
	225	#define CONFIG_I2C_CMD_TREE
	226	#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed and slave address */
	227	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	228	#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
	229	#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed and slave address */
	230	#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
	231	#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
	232	#define CONFIG_SYS_FSL_I2C3_SPEED 400000 /* I2C speed and slave address */
	233	#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F
	234	#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
	235	#define CONFIG_SYS_FSL_I2C4_SPEED 400000 /* I2C speed and slave address */
	236	#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F
	237	#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
	238
	239	#define CONFIG_ID_EEPROM
	240	#define CONFIG_SYS_I2C_EEPROM_NXID
	241	#define CONFIG_SYS_EEPROM_BUS_NUM 0
	242	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	243	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
	244
	245	#define CONFIG_SYS_I2C_GENERIC_MAC
	246	#define CONFIG_SYS_I2C_MAC1_BUS 3
	247	#define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
	248	#define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
	249	#define CONFIG_SYS_I2C_MAC2_BUS 0
	250	#define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
	251	#define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa
	252
	253	#define CONFIG_CMD_DATE 1
	254	#define CONFIG_RTC_MCP79411 1
	255	#define CONFIG_SYS_RTC_BUS_NUM 3
	256	#define CONFIG_SYS_I2C_RTC_ADDR 0x6f
	257
	258	/*
	259	* eSPI - Enhanced SPI
	260	*/
87e29878 AF	261
	262	/*
	263	* General PCI
	264	* Memory space is mapped 1-1, but I/O space must start from 0.
	265	*/
	266
	267	/* controller 1, direct to uli, tgtid 3, Base address 20000 */
	268	#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
	269	#ifdef CONFIG_PHYS_64BIT
	270	#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
	271	#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
	272	#else
	273	#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
	274	#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
	275	#endif
	276	#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
	277	#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
	278	#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
	279	#ifdef CONFIG_PHYS_64BIT
	280	#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
	281	#else
	282	#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000
	283	#endif
	284	#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
	285
	286	/* controller 2, Slot 2, tgtid 2, Base address 201000 */
	287	#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
	288	#ifdef CONFIG_PHYS_64BIT
	289	#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
	290	#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
	291	#else
	292	#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
	293	#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
	294	#endif
	295	#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
	296	#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
	297	#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
	298	#ifdef CONFIG_PHYS_64BIT
	299	#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
	300	#else
	301	#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000
	302	#endif
	303	#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
	304
	305	/* controller 3, Slot 1, tgtid 1, Base address 202000 */
	306	#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000
	307	#ifdef CONFIG_PHYS_64BIT
	308	#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
	309	#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull
	310	#else
	311	#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000
	312	#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000
	313	#endif
	314	#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
	315	#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
	316	#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
	317	#ifdef CONFIG_PHYS_64BIT
	318	#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
	319	#else
	320	#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000
	321	#endif
	322	#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
	323
	324	/* controller 4, Base address 203000 */
325	#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000
326	#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull
327	#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */
328	#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000
329	#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
330	#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */
331
332	/* Qman/Bman */
333	#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
334	#define CONFIG_SYS_BMAN_NUM_PORTALS 10
335	#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
336	#ifdef CONFIG_PHYS_64BIT
337	#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
338	#else
339	#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
340	#endif
341	#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
342	#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
343	#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
344	#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
345	#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
346	#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
347	CONFIG_SYS_BMAN_CENA_SIZE)
348	#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
349	#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
350	#define CONFIG_SYS_QMAN_NUM_PORTALS 10
351	#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000
352	#ifdef CONFIG_PHYS_64BIT
353	#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull
354	#else
355	#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
356	#endif
357	#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
358	#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
359	#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
360	#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
361	#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
362	#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
363	CONFIG_SYS_QMAN_CENA_SIZE)
364	#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
365	#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
366
367	#define CONFIG_SYS_DPAA_FMAN
368	/* Default address of microcode for the Linux Fman driver */
369	/*
370	* PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
371	* about 825KB (1650 blocks), Env is stored after the image, and the env size is
372	* 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
373	*/
374	#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
375	#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
376
377	#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
378	#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
379
380	#ifdef CONFIG_SYS_DPAA_FMAN
381	#define CONFIG_FMAN_ENET
382	#define CONFIG_PHY_MICREL
383	#define CONFIG_PHY_MICREL_KSZ9021
384	#endif
385
386	#ifdef CONFIG_PCI
387	#define CONFIG_PCI_INDIRECT_BRIDGE
388	#define CONFIG_PCI_PNP /* do pci plug-and-play */
389	#define CONFIG_NET_MULTI
390
391	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
392	#define CONFIG_DOS_PARTITION
393	#endif /* CONFIG_PCI */
394
395	/* SATA */
396	#ifdef CONFIG_FSL_SATA_V2
397	#define CONFIG_LIBATA
398	#define CONFIG_FSL_SATA
399
400	#define CONFIG_SYS_SATA_MAX_DEVICE 2
401	#define CONFIG_SATA1
402	#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
403	#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
404	#define CONFIG_SATA2
405	#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
406	#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
407
408	#define CONFIG_LBA48
409	#define CONFIG_CMD_SATA
410	#define CONFIG_DOS_PARTITION
87e29878 AF	411	#endif
	412
	413	#ifdef CONFIG_FMAN_ENET
	414	#define CONFIG_SYS_TBIPA_VALUE 8
	415	#define CONFIG_MII /* MII PHY management */
	416	#define CONFIG_ETHPRIME "FM1@DTSEC4"
	417	#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
	418	#endif
	419
	420	/*
	421	* Environment
	422	*/
	423	#define CONFIG_LOADS_ECHO /* echo on for serial download */
	424	#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
	425
	426	/*
	427	* Command line configuration.
	428	*/
87e29878	429	#define CONFIG_CMD_ERRATA
87e29878	430	#define CONFIG_CMD_IRQ
87e29878 AF	431	#define CONFIG_CMD_REGINFO
	432
	433	#ifdef CONFIG_PCI
	434	#define CONFIG_CMD_PCI
	435	#endif
	436
	437	/*
	438	* USB
	439	*/
	440	#define CONFIG_HAS_FSL_DR_USB
	441	#define CONFIG_HAS_FSL_MPH_USB
	442
	443	#if defined(CONFIG_HAS_FSL_DR_USB) \|\| defined(CONFIG_HAS_FSL_MPH_USB)
87e29878 AF	444	#define CONFIG_USB_EHCI
	445	#define CONFIG_USB_EHCI_FSL
	446	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
87e29878	447	#define CONFIG_EHCI_IS_TDI
87e29878 AF	448	#define CONFIG_SYS_USB_EVENT_POLL
87e29878 AF	449	/* _VIA_CONTROL_EP */
87e29878 AF	450	#endif
	451
	452	#ifdef CONFIG_MMC
	453	#define CONFIG_FSL_ESDHC
	454	#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
	455	#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
87e29878	456	#define CONFIG_GENERIC_MMC
87e29878 AF	457	#define CONFIG_DOS_PARTITION
	458	#endif
	459
	460	/*
	461	* Miscellaneous configurable options
	462	*/
	463	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	464	#define CONFIG_CMDLINE_EDITING /* Command-line editing */
	465	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
	466	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
87e29878 AF	467	#ifdef CONFIG_CMD_KGDB
	468	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	469	#else
	470	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	471	#endif
	472	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	473	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	474	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	475
	476	/*
	477	* For booting Linux, the board info and command line data
	478	* have to be in the first 64 MB of memory, since this is
	479	* the maximum mapped by the Linux kernel during initialization.
	480	*/
	481	#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
	482	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
	483
	484	#ifdef CONFIG_CMD_KGDB
	485	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	486	#endif
	487
	488	/*
	489	* Environment Configuration
	490	*/
	491	#define CONFIG_ROOTPATH "/opt/nfsroot"
	492	#define CONFIG_BOOTFILE "uImage"
	493	#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
	494
	495	/* default location for tftp and bootm */
	496	#define CONFIG_LOADADDR 1000000
	497
87e29878 AF	498
	499	#define CONFIG_BAUDRATE 115200
	500
	501	#define __USB_PHY_TYPE utmi
	502
	503	#define CONFIG_EXTRA_ENV_SETTINGS \
	504	"hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
	505	"bank_intlv=cs0_cs1;" \
	506	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
	507	"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
	508	"netdev=eth0\0" \
	509	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
	510	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
	511	"consoledev=ttyS0\0" \
	512	"ramdiskaddr=2000000\0" \
b24a4f62	513	"fdtaddr=1e00000\0" \
87e29878 AF	514	"bdev=sda3\0"
	515
	516	#define CONFIG_HDBOOT \
	517	"setenv bootargs root=/dev/$bdev rw " \
	518	"console=$consoledev,$baudrate $othbootargs;" \
	519	"tftp $loadaddr $bootfile;" \
	520	"tftp $fdtaddr $fdtfile;" \
	521	"bootm $loadaddr - $fdtaddr"
	522
	523	#define CONFIG_NFSBOOTCOMMAND \
	524	"setenv bootargs root=/dev/nfs rw " \
	525	"nfsroot=$serverip:$rootpath " \
	526	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	527	"console=$consoledev,$baudrate $othbootargs;" \
	528	"tftp $loadaddr $bootfile;" \
	529	"tftp $fdtaddr $fdtfile;" \
	530	"bootm $loadaddr - $fdtaddr"
	531
	532	#define CONFIG_RAMBOOTCOMMAND \
	533	"setenv bootargs root=/dev/ram rw " \
	534	"console=$consoledev,$baudrate $othbootargs;" \
	535	"tftp $ramdiskaddr $ramdiskfile;" \
	536	"tftp $loadaddr $bootfile;" \
	537	"tftp $fdtaddr $fdtfile;" \
	538	"bootm $loadaddr $ramdiskaddr $fdtaddr"
	539
	540	#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT
	541
	542	#include <asm/fsl_secure_boot.h>
	543
	544	#ifdef CONFIG_SECURE_BOOT
	545	#endif
	546
	547	#endif /* __CONFIG_H */