[people/ms/u-boot.git] / include / configs / cyrus.h

/*
 * Based on corenet_ds.h
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
#error Must call Cyrus CONFIG with a specific CPU enabled.
#endif

#define CONFIG_SDCARD
#define CONFIG_FSL_SATA_V2
#define CONFIG_PCIE3
#define CONFIG_PCIE4
#ifdef CONFIG_ARCH_P5020
#define CONFIG_SYS_FSL_RAID_ENGINE
#define CONFIG_SYS_DPAA_RMAN
#endif
#define CONFIG_SYS_DPAA_PME

/*
 * Corenet DS style board configuration file
 */
#define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
#define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
#if defined(CONFIG_ARCH_P5020)
#define CONFIG_SYS_CLK_FREQ 133000000
#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
#elif defined(CONFIG_ARCH_P5040)
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
#endif

/* High Level Configuration Options */
#define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
#define CONFIG_MP			/* support multiple processors */

#define CONFIG_SYS_MMC_MAX_DEVICE     1

#define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
#define CONFIG_PCIE1			/* PCIE controller 1 */
#define CONFIG_PCIE2			/* PCIE controller 2 */
#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */

#define CONFIG_ENV_OVERWRITE

#if defined(CONFIG_SDCARD)
#define CONFIG_SYS_EXTRA_ENV_RELOC
#define CONFIG_FSL_FIXED_MMC_LOCATION
#define CONFIG_SYS_MMC_ENV_DEV          0
#define CONFIG_ENV_SIZE			0x2000
#define CONFIG_ENV_OFFSET		(512 * 1658)
#endif

/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_SYS_CACHE_STASHING
#define CONFIG_BACKSIDE_L2_CACHE
#define CONFIG_SYS_INIT_L2CSR0		L2CSR0_L2E
#define CONFIG_BTB			/* toggle branch predition */
#define	CONFIG_DDR_ECC
#ifdef CONFIG_DDR_ECC
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
#endif

#define CONFIG_ENABLE_36BIT_PHYS

#ifdef CONFIG_PHYS_64BIT
#define CONFIG_ADDR_MAP
#define CONFIG_SYS_NUM_ADDR_MAP		64	/* number of TLB1 entries */
#endif

/* test POST memory test */
#undef CONFIG_POST
#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x00400000
#define CONFIG_SYS_ALT_MEMTEST

/*
 *  Config the L3 Cache as L3 SRAM
 */
#define CONFIG_SYS_INIT_L3_ADDR		CONFIG_RAMBOOT_TEXT_BASE
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_INIT_L3_ADDR_PHYS	(0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
#else
#define CONFIG_SYS_INIT_L3_ADDR_PHYS	CONFIG_SYS_INIT_L3_ADDR
#endif
#define CONFIG_SYS_L3_SIZE		(1024 << 10)
#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)

#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_DCSRBAR		0xf0000000
#define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
#endif

/*
 * DDR Setup
 */
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	(4 * CONFIG_DIMM_SLOTS_PER_CTLR)

#define CONFIG_DDR_SPD

#define CONFIG_SYS_SPD_BUS_NUM	1
#define SPD_EEPROM_ADDRESS1	0x51
#define SPD_EEPROM_ADDRESS2	0x52
#define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */

/*
 * Local Bus Definitions
 */

#define CONFIG_SYS_LBC0_BASE		0xe0000000 /* Start of LBC Registers */
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_LBC0_BASE_PHYS	0xfe0000000ull
#else
#define CONFIG_SYS_LBC0_BASE_PHYS	CONFIG_SYS_LBC0_BASE
#endif

#define CONFIG_SYS_LBC1_BASE		0xe1000000 /* Start of LBC Registers */
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_LBC1_BASE_PHYS	0xfe1000000ull
#else
#define CONFIG_SYS_LBC1_BASE_PHYS	CONFIG_SYS_LBC1_BASE
#endif

/* Set the local bus clock 1/16 of platform clock */
#define CONFIG_SYS_LBC_LCRR		(LCRR_CLKDIV_16 | LCRR_EADC_1)

#define CONFIG_SYS_BR0_PRELIM \
(BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V)
#define CONFIG_SYS_BR1_PRELIM \
(BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V)

#define CONFIG_SYS_OR0_PRELIM	0xfff00010
#define CONFIG_SYS_OR1_PRELIM	0xfff00010

#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE	/* start of monitor */

#if defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_SYS_RAMBOOT
#endif

#define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
#define CONFIG_MISC_INIT_R

#define CONFIG_HWCONFIG

/* define to use L1 as initial stack */
#define CONFIG_L1_INIT_RAM
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
/* The assembler doesn't like typecast */
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
#else
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS	CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
#endif
#define CONFIG_SYS_INIT_RAM_SIZE		0x00004000	/* Size of used area in RAM */

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */

/* Serial Port - controlled on board with jumper J8
 * open - index 2
 * shorted - index 1
 */
#define CONFIG_CONS_INDEX	1
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)

#define CONFIG_SYS_BAUDRATE_TABLE	\
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x11C500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x11C600)
#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR+0x11D500)
#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_FSL_I2C_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_FSL_I2C_SLAVE		0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET		0x118000
#define CONFIG_SYS_FSL_I2C2_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_FSL_I2C2_SLAVE		0x7F
#define CONFIG_SYS_FSL_I2C2_OFFSET		0x118100
#define CONFIG_SYS_FSL_I2C3_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_FSL_I2C3_SLAVE		0x7F
#define CONFIG_SYS_FSL_I2C3_OFFSET		0x119000
#define CONFIG_SYS_FSL_I2C4_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_FSL_I2C4_SLAVE		0x7F
#define CONFIG_SYS_FSL_I2C4_OFFSET		0x119100

#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_SYS_EEPROM_BUS_NUM	0
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57

#define CONFIG_SYS_I2C_GENERIC_MAC
#define CONFIG_SYS_I2C_MAC1_BUS 3
#define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
#define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
#define CONFIG_SYS_I2C_MAC2_BUS 0
#define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
#define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa

#define CONFIG_RTC_MCP79411		1
#define CONFIG_SYS_RTC_BUS_NUM		3
#define CONFIG_SYS_I2C_RTC_ADDR		0x6f

/*
 * eSPI - Enhanced SPI
 */

/*
 * General PCI
 * Memory space is mapped 1-1, but I/O space must start from 0.
 */

/* controller 1, direct to uli, tgtid 3, Base address 20000 */
#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
#else
#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
#define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
#endif
#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE1_IO_VIRT	0xf8000000
#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE1_IO_PHYS	0xff8000000ull
#else
#define CONFIG_SYS_PCIE1_IO_PHYS	0xf8000000
#endif
#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */

/* controller 2, Slot 2, tgtid 2, Base address 201000 */
#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
#else
#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
#endif
#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE2_IO_VIRT	0xf8010000
#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE2_IO_PHYS	0xff8010000ull
#else
#define CONFIG_SYS_PCIE2_IO_PHYS	0xf8010000
#endif
#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */

/* controller 3, Slot 1, tgtid 1, Base address 202000 */
#define CONFIG_SYS_PCIE3_MEM_VIRT	0xc0000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc40000000ull
#else
#define CONFIG_SYS_PCIE3_MEM_BUS	0xc0000000
#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc0000000
#endif
#define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE3_IO_VIRT	0xf8020000
#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE3_IO_PHYS	0xff8020000ull
#else
#define CONFIG_SYS_PCIE3_IO_PHYS	0xf8020000
#endif
#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */

/* controller 4, Base address 203000 */
#define CONFIG_SYS_PCIE4_MEM_BUS	0xe0000000
#define CONFIG_SYS_PCIE4_MEM_PHYS	0xc60000000ull
#define CONFIG_SYS_PCIE4_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE4_IO_BUS		0x00000000
#define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
#define CONFIG_SYS_PCIE4_IO_SIZE	0x00010000	/* 64k */

/* Qman/Bman */
#define CONFIG_SYS_BMAN_NUM_PORTALS	10
#define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
#else
#define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
#endif
#define CONFIG_SYS_BMAN_MEM_SIZE	0x00200000
#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
					 CONFIG_SYS_BMAN_CENA_SIZE)
#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
#define CONFIG_SYS_QMAN_NUM_PORTALS	10
#define CONFIG_SYS_QMAN_MEM_BASE	0xf4200000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_QMAN_MEM_PHYS	0xff4200000ull
#else
#define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
#endif
#define CONFIG_SYS_QMAN_MEM_SIZE	0x00200000
#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
					  CONFIG_SYS_QMAN_CENA_SIZE)
#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08

#define CONFIG_SYS_DPAA_FMAN
/* Default address of microcode for the Linux Fman driver */
/*
 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 */
#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR	(512 * 1680)

#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)

#ifdef CONFIG_SYS_DPAA_FMAN
#define CONFIG_FMAN_ENET
#endif

#ifdef CONFIG_PCI
#define CONFIG_PCI_INDIRECT_BRIDGE

#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
#endif	/* CONFIG_PCI */

/* SATA */
#ifdef CONFIG_FSL_SATA_V2
#define CONFIG_SYS_SATA_MAX_DEVICE	2
#define CONFIG_SATA1
#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
#define CONFIG_SATA2
#define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA

#define CONFIG_LBA48
#endif

#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_TBIPA_VALUE	8
#define CONFIG_MII		/* MII PHY management */
#define CONFIG_ETHPRIME		"FM1@DTSEC4"
#endif

/*
 * Environment
 */
#define CONFIG_LOADS_ECHO		/* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */

/*
 * USB
 */
#define CONFIG_HAS_FSL_DR_USB
#define CONFIG_HAS_FSL_MPH_USB

#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
#define CONFIG_USB_EHCI_FSL
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_EHCI_IS_TDI
 /* _VIA_CONTROL_EP  */
#endif

#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
#endif

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 64 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */

#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#endif

/*
 * Environment Configuration
 */
#define CONFIG_ROOTPATH		"/opt/nfsroot"
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */

/* default location for tftp and bootm */
#define CONFIG_LOADADDR		1000000

#define __USB_PHY_TYPE	utmi

#define	CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:ctlr_intlv=cacheline,"		\
"bank_intlv=cs0_cs1;"					\
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0"						\
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"			\
"consoledev=ttyS0\0"					\
"ramdiskaddr=2000000\0"					\
"fdtaddr=1e00000\0"					\
"bdev=sda3\0"

#define CONFIG_HDBOOT					\
"setenv bootargs root=/dev/$bdev rw "		\
"console=$consoledev,$baudrate $othbootargs;"	\
"tftp $loadaddr $bootfile;"			\
"tftp $fdtaddr $fdtfile;"			\
"bootm $loadaddr - $fdtaddr"

#define CONFIG_NFSBOOTCOMMAND			\
"setenv bootargs root=/dev/nfs rw "	\
"nfsroot=$serverip:$rootpath "		\
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;"	\
"tftp $loadaddr $bootfile;"		\
"tftp $fdtaddr $fdtfile;"		\
"bootm $loadaddr - $fdtaddr"

#define CONFIG_RAMBOOTCOMMAND				\
"setenv bootargs root=/dev/ram rw "		\
"console=$consoledev,$baudrate $othbootargs;"	\
"tftp $ramdiskaddr $ramdiskfile;"		\
"tftp $loadaddr $bootfile;"			\
"tftp $fdtaddr $fdtfile;"			\
"bootm $loadaddr $ramdiskaddr $fdtaddr"

#define CONFIG_BOOTCOMMAND		CONFIG_HDBOOT

#include <asm/fsl_secure_boot.h>

#ifdef CONFIG_SECURE_BOOT
#endif

#endif	/* __CONFIG_H */
Commit	Line	Data
87e29878 AF	1	/*
	2	* Based on corenet_ds.h
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
95390360	10	#if !defined(CONFIG_ARCH_P5020) && !defined(CONFIG_ARCH_P5040)
87e29878 AF	11	#error Must call Cyrus CONFIG with a specific CPU enabled.
	12	#endif
	13
87e29878 AF	14	#define CONFIG_SDCARD
	15	#define CONFIG_FSL_SATA_V2
	16	#define CONFIG_PCIE3
	17	#define CONFIG_PCIE4
cefe11cd	18	#ifdef CONFIG_ARCH_P5020
87e29878 AF	19	#define CONFIG_SYS_FSL_RAID_ENGINE
	20	#define CONFIG_SYS_DPAA_RMAN
	21	#endif
	22	#define CONFIG_SYS_DPAA_PME
	23
	24	/*
	25	* Corenet DS style board configuration file
	26	*/
	27	#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
	28	#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
	29	#define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg
cefe11cd	30	#if defined(CONFIG_ARCH_P5020)
87e29878 AF	31	#define CONFIG_SYS_CLK_FREQ 133000000
87e29878 AF	32	#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg
95390360	33	#elif defined(CONFIG_ARCH_P5040)
87e29878 AF	34	#define CONFIG_SYS_CLK_FREQ 100000000
	35	#define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg
	36	#endif
	37
87e29878	38	/* High Level Configuration Options */
87e29878 AF	39	#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
	40	#define CONFIG_MP /* support multiple processors */
	41
87e29878 AF	42	#define CONFIG_SYS_MMC_MAX_DEVICE 1
87e29878 AF	43
87e29878	44	#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
51370d56	45	#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
b38eaec5 RD	46	#define CONFIG_PCIE1 /* PCIE controller 1 */
b38eaec5 RD	47	#define CONFIG_PCIE2 /* PCIE controller 2 */
87e29878 AF	48	#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
	49	#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
	50
87e29878 AF	51	#define CONFIG_ENV_OVERWRITE
87e29878 AF	52
87e29878 AF	53	#if defined(CONFIG_SDCARD)
87e29878 AF	54	#define CONFIG_SYS_EXTRA_ENV_RELOC
87e29878 AF	55	#define CONFIG_FSL_FIXED_MMC_LOCATION
	56	#define CONFIG_SYS_MMC_ENV_DEV 0
	57	#define CONFIG_ENV_SIZE 0x2000
	58	#define CONFIG_ENV_OFFSET (512 * 1658)
	59	#endif
	60
	61	/*
	62	* These can be toggled for performance analysis, otherwise use default.
	63	*/
	64	#define CONFIG_SYS_CACHE_STASHING
	65	#define CONFIG_BACKSIDE_L2_CACHE
	66	#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
	67	#define CONFIG_BTB /* toggle branch predition */
	68	#define CONFIG_DDR_ECC
	69	#ifdef CONFIG_DDR_ECC
	70	#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
	71	#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
	72	#endif
	73
	74	#define CONFIG_ENABLE_36BIT_PHYS
	75
	76	#ifdef CONFIG_PHYS_64BIT
	77	#define CONFIG_ADDR_MAP
	78	#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
	79	#endif
	80
	81	/* test POST memory test */
	82	#undef CONFIG_POST
	83	#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
	84	#define CONFIG_SYS_MEMTEST_END 0x00400000
	85	#define CONFIG_SYS_ALT_MEMTEST
87e29878 AF	86
	87	/*
	88	* Config the L3 Cache as L3 SRAM
	89	*/
	90	#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE
	91	#ifdef CONFIG_PHYS_64BIT
	92	#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull \| CONFIG_RAMBOOT_TEXT_BASE)
	93	#else
	94	#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR
	95	#endif
	96	#define CONFIG_SYS_L3_SIZE (1024 << 10)
	97	#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
	98
	99	#ifdef CONFIG_PHYS_64BIT
	100	#define CONFIG_SYS_DCSRBAR 0xf0000000
	101	#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
	102	#endif
	103
	104	/*
	105	* DDR Setup
	106	*/
	107	#define CONFIG_VERY_BIG_RAM
	108	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
	109	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
	110
	111	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	112	#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
	113
	114	#define CONFIG_DDR_SPD
87e29878 AF	115
	116	#define CONFIG_SYS_SPD_BUS_NUM 1
	117	#define SPD_EEPROM_ADDRESS1 0x51
	118	#define SPD_EEPROM_ADDRESS2 0x52
	119	#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
	120
	121	/*
	122	* Local Bus Definitions
	123	*/
	124
	125	#define CONFIG_SYS_LBC0_BASE 0xe0000000 /* Start of LBC Registers */
	126	#ifdef CONFIG_PHYS_64BIT
	127	#define CONFIG_SYS_LBC0_BASE_PHYS 0xfe0000000ull
	128	#else
	129	#define CONFIG_SYS_LBC0_BASE_PHYS CONFIG_SYS_LBC0_BASE
	130	#endif
	131
	132	#define CONFIG_SYS_LBC1_BASE 0xe1000000 /* Start of LBC Registers */
	133	#ifdef CONFIG_PHYS_64BIT
	134	#define CONFIG_SYS_LBC1_BASE_PHYS 0xfe1000000ull
	135	#else
	136	#define CONFIG_SYS_LBC1_BASE_PHYS CONFIG_SYS_LBC1_BASE
	137	#endif
	138
	139	/* Set the local bus clock 1/16 of platform clock */
	140	#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_16 \| LCRR_EADC_1)
	141
	142	#define CONFIG_SYS_BR0_PRELIM \
	143	(BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) \| BR_PS_16 \| BR_V)
	144	#define CONFIG_SYS_BR1_PRELIM \
	145	(BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) \| BR_PS_16 \| BR_V)
	146
	147	#define CONFIG_SYS_OR0_PRELIM 0xfff00010
	148	#define CONFIG_SYS_OR1_PRELIM 0xfff00010
	149
87e29878 AF	150	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
	151
	152	#if defined(CONFIG_RAMBOOT_PBL)
	153	#define CONFIG_SYS_RAMBOOT
	154	#endif
	155
87e29878 AF	156	#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
	157	#define CONFIG_MISC_INIT_R
	158
	159	#define CONFIG_HWCONFIG
	160
	161	/* define to use L1 as initial stack */
	162	#define CONFIG_L1_INIT_RAM
	163	#define CONFIG_SYS_INIT_RAM_LOCK
	164	#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
	165	#ifdef CONFIG_PHYS_64BIT
	166	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
	167	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
	168	/* The assembler doesn't like typecast */
	169	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
	170	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) \| \
	171	CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
	172	#else
	173	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
	174	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
	175	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
	176	#endif
	177	#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */
	178
	179	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	180	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	181
	182	#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
	183	#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
	184
	185	/* Serial Port - controlled on board with jumper J8
	186	* open - index 2
	187	* shorted - index 1
	188	*/
	189	#define CONFIG_CONS_INDEX 1
87e29878 AF	190	#define CONFIG_SYS_NS16550_SERIAL
	191	#define CONFIG_SYS_NS16550_REG_SIZE 1
	192	#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
	193
	194	#define CONFIG_SYS_BAUDRATE_TABLE \
	195	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
	196
	197	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
	198	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
	199	#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
	200	#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
	201
87e29878 AF	202	/* I2C */
	203	#define CONFIG_SYS_I2C
	204	#define CONFIG_SYS_I2C_FSL
	205	#define CONFIG_I2C_MULTI_BUS
	206	#define CONFIG_I2C_CMD_TREE
	207	#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed and slave address */
	208	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	209	#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
	210	#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed and slave address */
	211	#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
	212	#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
	213	#define CONFIG_SYS_FSL_I2C3_SPEED 400000 /* I2C speed and slave address */
	214	#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F
	215	#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
	216	#define CONFIG_SYS_FSL_I2C4_SPEED 400000 /* I2C speed and slave address */
	217	#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F
	218	#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
	219
	220	#define CONFIG_ID_EEPROM
	221	#define CONFIG_SYS_I2C_EEPROM_NXID
	222	#define CONFIG_SYS_EEPROM_BUS_NUM 0
	223	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	224	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
	225
	226	#define CONFIG_SYS_I2C_GENERIC_MAC
	227	#define CONFIG_SYS_I2C_MAC1_BUS 3
	228	#define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57
	229	#define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2
	230	#define CONFIG_SYS_I2C_MAC2_BUS 0
	231	#define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50
	232	#define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa
	233
87e29878 AF	234	#define CONFIG_RTC_MCP79411 1
	235	#define CONFIG_SYS_RTC_BUS_NUM 3
	236	#define CONFIG_SYS_I2C_RTC_ADDR 0x6f
	237
	238	/*
	239	* eSPI - Enhanced SPI
	240	*/
87e29878 AF	241
	242	/*
	243	* General PCI
	244	* Memory space is mapped 1-1, but I/O space must start from 0.
	245	*/
	246
	247	/* controller 1, direct to uli, tgtid 3, Base address 20000 */
	248	#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
	249	#ifdef CONFIG_PHYS_64BIT
	250	#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
	251	#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
	252	#else
	253	#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
	254	#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
	255	#endif
	256	#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
	257	#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
	258	#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
	259	#ifdef CONFIG_PHYS_64BIT
	260	#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
	261	#else
	262	#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000
	263	#endif
	264	#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
	265
	266	/* controller 2, Slot 2, tgtid 2, Base address 201000 */
	267	#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
	268	#ifdef CONFIG_PHYS_64BIT
	269	#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
	270	#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
	271	#else
	272	#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
	273	#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
	274	#endif
	275	#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
	276	#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
	277	#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
	278	#ifdef CONFIG_PHYS_64BIT
	279	#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
	280	#else
	281	#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000
	282	#endif
	283	#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
	284
	285	/* controller 3, Slot 1, tgtid 1, Base address 202000 */
	286	#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000
	287	#ifdef CONFIG_PHYS_64BIT
	288	#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
	289	#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull
	290	#else
	291	#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000
	292	#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000
	293	#endif
	294	#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
	295	#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
	296	#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
	297	#ifdef CONFIG_PHYS_64BIT
	298	#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
	299	#else
	300	#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000
	301	#endif
	302	#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
	303
	304	/* controller 4, Base address 203000 */
305	#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000
306	#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull
307	#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */
308	#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000
309	#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
310	#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */
311
312	/* Qman/Bman */
87e29878 AF	313	#define CONFIG_SYS_BMAN_NUM_PORTALS 10
	314	#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
	315	#ifdef CONFIG_PHYS_64BIT
	316	#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
	317	#else
	318	#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
	319	#endif
	320	#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
	321	#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
	322	#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
	323	#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
	324	#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
	325	#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
	326	CONFIG_SYS_BMAN_CENA_SIZE)
	327	#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
	328	#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
	329	#define CONFIG_SYS_QMAN_NUM_PORTALS 10
	330	#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000
	331	#ifdef CONFIG_PHYS_64BIT
	332	#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull
	333	#else
	334	#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
	335	#endif
	336	#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
	337	#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
	338	#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
	339	#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
	340	#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
	341	#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
	342	CONFIG_SYS_QMAN_CENA_SIZE)
	343	#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
	344	#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
	345
	346	#define CONFIG_SYS_DPAA_FMAN
	347	/* Default address of microcode for the Linux Fman driver */
	348	/*
	349	* PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
	350	* about 825KB (1650 blocks), Env is stored after the image, and the env size is
	351	* 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
	352	*/
	353	#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
	354	#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
	355
	356	#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
	357	#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
	358
	359	#ifdef CONFIG_SYS_DPAA_FMAN
	360	#define CONFIG_FMAN_ENET
87e29878 AF	361	#endif
	362
	363	#ifdef CONFIG_PCI
	364	#define CONFIG_PCI_INDIRECT_BRIDGE
87e29878 AF	365
87e29878 AF	366	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
87e29878 AF	367	#endif /* CONFIG_PCI */
	368
	369	/* SATA */
	370	#ifdef CONFIG_FSL_SATA_V2
87e29878 AF	371	#define CONFIG_SYS_SATA_MAX_DEVICE 2
	372	#define CONFIG_SATA1
	373	#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
	374	#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
	375	#define CONFIG_SATA2
	376	#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
	377	#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
	378
	379	#define CONFIG_LBA48
87e29878 AF	380	#endif
	381
	382	#ifdef CONFIG_FMAN_ENET
	383	#define CONFIG_SYS_TBIPA_VALUE 8
	384	#define CONFIG_MII /* MII PHY management */
	385	#define CONFIG_ETHPRIME "FM1@DTSEC4"
87e29878 AF	386	#endif
	387
	388	/*
	389	* Environment
	390	*/
	391	#define CONFIG_LOADS_ECHO /* echo on for serial download */
	392	#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
	393
87e29878 AF	394	/*
	395	* USB
	396	*/
	397	#define CONFIG_HAS_FSL_DR_USB
	398	#define CONFIG_HAS_FSL_MPH_USB
	399
	400	#if defined(CONFIG_HAS_FSL_DR_USB) \|\| defined(CONFIG_HAS_FSL_MPH_USB)
87e29878 AF	401	#define CONFIG_USB_EHCI_FSL
87e29878 AF	402	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
87e29878	403	#define CONFIG_EHCI_IS_TDI
87e29878	404	/* _VIA_CONTROL_EP */
87e29878 AF	405	#endif
	406
	407	#ifdef CONFIG_MMC
	408	#define CONFIG_FSL_ESDHC
	409	#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
	410	#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
87e29878 AF	411	#endif
	412
	413	/*
	414	* Miscellaneous configurable options
	415	*/
87e29878	416	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
87e29878 AF	417
	418	/*
	419	* For booting Linux, the board info and command line data
	420	* have to be in the first 64 MB of memory, since this is
	421	* the maximum mapped by the Linux kernel during initialization.
	422	*/
	423	#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
	424	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
	425
	426	#ifdef CONFIG_CMD_KGDB
	427	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	428	#endif
	429
	430	/*
	431	* Environment Configuration
	432	*/
	433	#define CONFIG_ROOTPATH "/opt/nfsroot"
	434	#define CONFIG_BOOTFILE "uImage"
	435	#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
	436
	437	/* default location for tftp and bootm */
	438	#define CONFIG_LOADADDR 1000000
	439
87e29878 AF	440	#define __USB_PHY_TYPE utmi
	441
	442	#define CONFIG_EXTRA_ENV_SETTINGS \
	443	"hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
	444	"bank_intlv=cs0_cs1;" \
	445	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
	446	"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
	447	"netdev=eth0\0" \
	448	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
	449	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
	450	"consoledev=ttyS0\0" \
	451	"ramdiskaddr=2000000\0" \
b24a4f62	452	"fdtaddr=1e00000\0" \
87e29878 AF	453	"bdev=sda3\0"
	454
	455	#define CONFIG_HDBOOT \
	456	"setenv bootargs root=/dev/$bdev rw " \
	457	"console=$consoledev,$baudrate $othbootargs;" \
	458	"tftp $loadaddr $bootfile;" \
	459	"tftp $fdtaddr $fdtfile;" \
	460	"bootm $loadaddr - $fdtaddr"
	461
	462	#define CONFIG_NFSBOOTCOMMAND \
	463	"setenv bootargs root=/dev/nfs rw " \
	464	"nfsroot=$serverip:$rootpath " \
	465	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	466	"console=$consoledev,$baudrate $othbootargs;" \
	467	"tftp $loadaddr $bootfile;" \
	468	"tftp $fdtaddr $fdtfile;" \
	469	"bootm $loadaddr - $fdtaddr"
	470
	471	#define CONFIG_RAMBOOTCOMMAND \
	472	"setenv bootargs root=/dev/ram rw " \
	473	"console=$consoledev,$baudrate $othbootargs;" \
	474	"tftp $ramdiskaddr $ramdiskfile;" \
	475	"tftp $loadaddr $bootfile;" \
	476	"tftp $fdtaddr $fdtfile;" \
	477	"bootm $loadaddr $ramdiskaddr $fdtaddr"
	478
	479	#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT
	480
	481	#include <asm/fsl_secure_boot.h>
	482
	483	#ifdef CONFIG_SECURE_BOOT
	484	#endif
	485
	486	#endif /* __CONFIG_H */