[people/ms/u-boot.git] / include / configs / db-88f6820-gp.h

/*
 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_DB_88F6820_GP_H
#define _CONFIG_DB_88F6820_GP_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_ARMADA_XP		/* SOC Family Name */
#define CONFIG_DB_88F6820_GP		/* Board target name for DDR training */

#define CONFIG_SYS_L2_PL310

#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_DISPLAY_BOARDINFO_LATE

#define	CONFIG_SYS_TEXT_BASE	0x04000000
#define CONFIG_SYS_TCLK		250000000	/* 250MHz */

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MMC
#define CONFIG_CMD_PING
#define CONFIG_CMD_SCSI
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_CMD_TFTPPUT
#define CONFIG_CMD_TIME

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MVTWSI
#define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
#define CONFIG_SYS_I2C_SLAVE		0x0
#define CONFIG_SYS_I2C_SPEED		100000

/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_SPEED		1000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
#define CONFIG_SPI_FLASH_STMICRO

/*
 * SDIO/MMC Card Configuration
 */
#define CONFIG_MMC
#define CONFIG_MMC_SDMA
#define CONFIG_GENERIC_MMC
#define CONFIG_SDHCI
#define CONFIG_MV_SDHCI
#define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE

/*
 * SATA/SCSI/AHCI configuration
 */
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
					 CONFIG_SYS_SCSI_MAX_LUN)

/* Partition support */
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION

/* Additional FS support/configuration */
#define CONFIG_SUPPORT_VFAT

/* Environment in SPI NOR flash */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */

#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
#define CONFIG_PHY_ADDR			{ 1, 0 }
#define CONFIG_SYS_NETA_INTERFACE_TYPE	PHY_INTERFACE_MODE_RGMII
#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */

#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
#define CONFIG_SYS_ALT_MEMTEST

/* Keep device tree and initrd in lower memory so the kernel can access them */
#define CONFIG_EXTRA_ENV_SETTINGS	\
	"fdt_high=0x10000000\0"		\
	"initrd_high=0x10000000\0"

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

#endif /* _CONFIG_DB_88F6820_GP_H */
Commit	Line	Data
2bae75a4 SR	1	/*
	2	* Copyright (C) 2014 Stefan Roese <sr@denx.de>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef _CONFIG_DB_88F6820_GP_H
	8	#define _CONFIG_DB_88F6820_GP_H
	9
	10	/*
	11	* High Level Configuration Options (easy to change)
	12	*/
	13	#define CONFIG_ARMADA_XP /* SOC Family Name */
	14	#define CONFIG_DB_88F6820_GP /* Board target name for DDR training */
	15
	16	#define CONFIG_SYS_L2_PL310
	17
	18	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	19	#define CONFIG_SYS_GENERIC_BOARD
	20	#define CONFIG_DISPLAY_BOARDINFO_LATE
	21
	22	#define CONFIG_SYS_TEXT_BASE 0x04000000
	23	#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
	24
	25	/*
	26	* Commands configuration
	27	*/
	28	#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
2bae75a4 SR	29	#define CONFIG_CMD_CACHE
	30	#define CONFIG_CMD_DHCP
	31	#define CONFIG_CMD_ENV
e80f1e85 SR	32	#define CONFIG_CMD_EXT2
	33	#define CONFIG_CMD_EXT4
	34	#define CONFIG_CMD_FAT
	35	#define CONFIG_CMD_FS_GENERIC
2bae75a4	36	#define CONFIG_CMD_I2C
e80f1e85	37	#define CONFIG_CMD_MMC
2bae75a4	38	#define CONFIG_CMD_PING
4d991cb3	39	#define CONFIG_CMD_SCSI
2bae75a4 SR	40	#define CONFIG_CMD_SF
	41	#define CONFIG_CMD_SPI
	42	#define CONFIG_CMD_TFTPPUT
	43	#define CONFIG_CMD_TIME
	44
	45	/* I2C */
	46	#define CONFIG_SYS_I2C
	47	#define CONFIG_SYS_I2C_MVTWSI
	48	#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
	49	#define CONFIG_SYS_I2C_SLAVE 0x0
	50	#define CONFIG_SYS_I2C_SPEED 100000
	51
	52	/* SPI NOR flash default params, used by sf commands */
	53	#define CONFIG_SF_DEFAULT_SPEED 1000000
	54	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
	55	#define CONFIG_SPI_FLASH_STMICRO
	56
e80f1e85 SR	57	/*
	58	* SDIO/MMC Card Configuration
	59	*/
	60	#define CONFIG_MMC
	61	#define CONFIG_MMC_SDMA
	62	#define CONFIG_GENERIC_MMC
	63	#define CONFIG_SDHCI
	64	#define CONFIG_MV_SDHCI
	65	#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
	66
7cbaff95 SR	67	/*
	68	* SATA/SCSI/AHCI configuration
	69	*/
	70	#define CONFIG_LIBATA
	71	#define CONFIG_SCSI_AHCI
	72	#define CONFIG_SCSI_AHCI_PLAT
	73	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
	74	#define CONFIG_SYS_SCSI_MAX_LUN 1
	75	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	76	CONFIG_SYS_SCSI_MAX_LUN)
	77
e80f1e85 SR	78	/* Partition support */
	79	#define CONFIG_DOS_PARTITION
	80	#define CONFIG_EFI_PARTITION
	81
	82	/* Additional FS support/configuration */
	83	#define CONFIG_SUPPORT_VFAT
	84
2bae75a4 SR	85	/* Environment in SPI NOR flash */
	86	#define CONFIG_ENV_IS_IN_SPI_FLASH
	87	#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
	88	#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
	89	#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
	90
	91	#define CONFIG_PHY_MARVELL /* there is a marvell phy */
	92	#define CONFIG_PHY_ADDR { 1, 0 }
	93	#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII
	94	#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
	95
	96	#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
	97	#define CONFIG_SYS_ALT_MEMTEST
	98
3fd38af7 KS	99	/* Keep device tree and initrd in lower memory so the kernel can access them */
	100	#define CONFIG_EXTRA_ENV_SETTINGS \
	101	"fdt_high=0x10000000\0" \
	102	"initrd_high=0x10000000\0"
	103
2bae75a4 SR	104	/*
	105	* mv-common.h should be defined after CMD configs since it used them
	106	* to enable certain macros
	107	*/
	108	#include "mv-common.h"
	109
	110	#endif /* _CONFIG_DB_88F6820_GP_H */