[people/ms/u-boot.git] / include / configs / dns325.h

/*
 * Copyright (C) 2011
 * Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
 *
 * Based on Kirkwood support:
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_DNS325_H
#define _CONFIG_DNS325_H

/*
 * Machine number definition
 */
#define MACH_TYPE_DNS325		3800
#define CONFIG_MACH_TYPE		MACH_TYPE_DNS325
#define CONFIG_IDENT_STRING		"\nD-Link DNS-325"

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
#define CONFIG_KW88F6281		/* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
#define CONFIG_CMD_IDE
#define CONFIG_CMD_DATE
#define CONFIG_SYS_MVFS

#define CONFIG_NR_DRAM_BANKS		1

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* Remove or override few declarations from mv-common.h */
#undef CONFIG_SYS_PROMPT

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS		{1, 0} /* enable port 0 only */
#define CONFIG_NETCONSOLE
#endif

/*
 * SATA Driver configuration
 */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
#endif

/*
 * RTC driver configuration
 */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif

/*
 * Enable GPI0 support
 */
#define CONFIG_KIRKWOOD_GPIO

/*
 * Use the HUSH parser
 */
#define CONFIG_SYS_HUSH_PARSER

/*
 * Console configuration
 */
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV

/*
 * Enable device tree support
 */
#define CONFIG_OF_LIBFDT

/*
 * Display cpu info at boot
 */
#define CONFIG_DISPLAY_CPUINFO

/*
 * Environment variables configurations
 */
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128KB */
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

#define CONFIG_ENV_SIZE			0x20000	/* 128KB */
#define CONFIG_ENV_ADDR			0xe0000
#define CONFIG_ENV_OFFSET		0xe0000	/* env starts here */

/*
 * Default environment variables
 */
#define MTDIDS_DEFAULT			"nand0=orion_nand"

#define MTDPARTS_DEFAULT		"mtdparts=orion_nand:" \
	"896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"stdin=serial\0" \
	"stdout=serial\0" \
	"stderr=serial\0" \
	"loadaddr=0x800000\0" \
	"autoload=no\0" \
	"console=ttyS0,115200\0" \
	"mtdparts="MTDPARTS_DEFAULT \
	"optargs=\0" \
	"bootenv=uEnv.txt\0" \
	"importbootenv=echo Importing environment ...; " \
		"env import -t ${loadaddr} ${filesize}\0" \
	"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
	"setbootargs=setenv bootargs console=${console} " \
		"${optargs} " \
		"${mtdparts} " \
		"root=${bootenvroot} " \
		"rootfstype=${bootenvrootfstype}\0" \
	"subbootcmd=run setbootargs; " \
		"if run bootenvloadimage; then " \
			"bootm ${loadaddr};" \
		"fi;\0" \
	"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
	"nandrootfstype=ubifs\0" \
	"nandloadimage=nand read ${loadaddr} kernel\0" \
	"setnandbootenv=echo Booting from nand ...; " \
		"setenv bootenvroot ${nandroot}; " \
		"setenv bootenvrootfstype ${nandrootfstype}; " \
		"setenv bootenvloadimage ${nandloadimage}\0"

#define CONFIG_BOOTCOMMAND \
	"if test -n ${bootenv} && usb start; then " \
		"if run loadbootenv; then " \
			"echo Loaded environment ${bootenv} from usb;" \
			"run importbootenv;" \
		"fi;" \
		"if test -n ${bootenvcmd}; then " \
			"echo Running bootenvcmd ...;" \
			"run bootenvcmd;" \
		"fi;" \
	"fi;" \
	"run setnandbootenv subbootcmd;"

#endif /* _CONFIG_DNS325_H */
Commit	Line	Data
bfacf466 S	1	/*
	2	* Copyright (C) 2011
	3	* Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
	4	*
	5	* Based on Kirkwood support:
	6	* (C) Copyright 2009
	7	* Marvell Semiconductor <www.marvell.com>
	8	* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
	9	*
1a459660	10	* SPDX-License-Identifier: GPL-2.0+
bfacf466 S	11	*/
	12
	13	#ifndef _CONFIG_DNS325_H
	14	#define _CONFIG_DNS325_H
	15
	16	/*
	17	* Machine number definition
	18	*/
	19	#define MACH_TYPE_DNS325 3800
	20	#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
	21	#define CONFIG_IDENT_STRING "\nD-Link DNS-325"
	22
	23	/*
	24	* High Level Configuration Options (easy to change)
	25	*/
	26	#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
bfacf466 S	27	#define CONFIG_KW88F6281 /* SOC Name */
	28	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	29
	30	/*
	31	* Commands configuration
	32	*/
	33	#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
	34	#include <config_cmd_default.h>
	35	#define CONFIG_CMD_DHCP
	36	#define CONFIG_CMD_ENV
	37	#define CONFIG_CMD_NAND
	38	#define CONFIG_CMD_PING
	39	#define CONFIG_CMD_USB
	40	#define CONFIG_CMD_IDE
	41	#define CONFIG_CMD_DATE
	42	#define CONFIG_SYS_MVFS
	43
	44	#define CONFIG_NR_DRAM_BANKS 1
	45
	46	/*
	47	* mv-common.h should be defined after CMD configs since it used them
	48	* to enable certain macros
	49	*/
	50	#include "mv-common.h"
	51
	52	/* Remove or override few declarations from mv-common.h */
	53	#undef CONFIG_SYS_PROMPT
bfacf466 S	54
	55	/*
	56	* Ethernet Driver configuration
	57	*/
	58	#ifdef CONFIG_CMD_NET
	59	#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
	60	#define CONFIG_NETCONSOLE
	61	#endif
	62
	63	/*
	64	* SATA Driver configuration
	65	*/
	66	#ifdef CONFIG_MVSATA_IDE
	67	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
	68	#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
	69	#endif
	70
	71	/*
	72	* RTC driver configuration
	73	*/
	74	#ifdef CONFIG_CMD_DATE
	75	#define CONFIG_RTC_MV
	76	#endif
	77
	78	/*
	79	* Enable GPI0 support
	80	*/
	81	#define CONFIG_KIRKWOOD_GPIO
	82
	83	/*
	84	* Use the HUSH parser
	85	*/
	86	#define CONFIG_SYS_HUSH_PARSER
bfacf466 S	87
	88	/*
	89	* Console configuration
	90	*/
	91	#define CONFIG_CONSOLE_MUX
	92	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	93
	94	/*
	95	* Enable device tree support
	96	*/
	97	#define CONFIG_OF_LIBFDT
	98
	99	/*
	100	* Display cpu info at boot
	101	*/
	102	#define CONFIG_DISPLAY_CPUINFO
	103
	104	/*
	105	* Environment variables configurations
	106	*/
	107	#ifdef CONFIG_CMD_NAND
	108	#define CONFIG_ENV_IS_IN_NAND
	109	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
	110	#else
	111	#define CONFIG_ENV_IS_NOWHERE
	112	#endif
	113
	114	#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
	115	#define CONFIG_ENV_ADDR 0xe0000
	116	#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
	117
	118	/*
	119	* Default environment variables
	120	*/
	121	#define MTDIDS_DEFAULT "nand0=orion_nand"
	122
	123	#define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
	124	"896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
	125
	126	#define CONFIG_EXTRA_ENV_SETTINGS \
	127	"stdin=serial\0" \
	128	"stdout=serial\0" \
	129	"stderr=serial\0" \
	130	"loadaddr=0x800000\0" \
	131	"autoload=no\0" \
	132	"console=ttyS0,115200\0" \
	133	"mtdparts="MTDPARTS_DEFAULT \
	134	"optargs=\0" \
	135	"bootenv=uEnv.txt\0" \
	136	"importbootenv=echo Importing environment ...; " \
	137	"env import -t ${loadaddr} ${filesize}\0" \
	138	"loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
	139	"setbootargs=setenv bootargs console=${console} " \
	140	"${optargs} " \
	141	"${mtdparts} " \
	142	"root=${bootenvroot} " \
	143	"rootfstype=${bootenvrootfstype}\0" \
	144	"subbootcmd=run setbootargs; " \
	145	"if run bootenvloadimage; then " \
	146	"bootm ${loadaddr};" \
	147	"fi;\0" \
	148	"nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
	149	"nandrootfstype=ubifs\0" \
	150	"nandloadimage=nand read ${loadaddr} kernel\0" \
151	"setnandbootenv=echo Booting from nand ...; " \
152	"setenv bootenvroot ${nandroot}; " \
153	"setenv bootenvrootfstype ${nandrootfstype}; " \
154	"setenv bootenvloadimage ${nandloadimage}\0"
155
156	#define CONFIG_BOOTCOMMAND \
157	"if test -n ${bootenv} && usb start; then " \
158	"if run loadbootenv; then " \
159	"echo Loaded environment ${bootenv} from usb;" \
160	"run importbootenv;" \
161	"fi;" \
162	"if test -n ${bootenvcmd}; then " \
163	"echo Running bootenvcmd ...;" \
164	"run bootenvcmd;" \
165	"fi;" \
166	"fi;" \
167	"run setnandbootenv subbootcmd;"
168
169	#endif /* _CONFIG_DNS325_H */