[people/ms/u-boot.git] / include / configs / draco.h

/*
 * (C) Copyright 2013 Siemens Schweiz AG
 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * U-Boot file:/include/configs/am335x_evm.h
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_DRACO_H
#define __CONFIG_DRACO_H

#define CONFIG_SIEMENS_DRACO
#define MACH_TYPE_DRACO			4314
#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_DRACO

#include "siemens-am33x-common.h"

#define CONFIG_SYS_MPUCLK	300
#define DDR_PLL_FREQ	303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC

#define BOARD_DFU_BUTTON_GPIO	27	/* Use as default */
#define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */

#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	"button_dfu0=27\0" \
	"led0=103,1,0\0" \
	"led1=64,0,1\0"

#undef CONFIG_DOS_PARTITION

#define CONFIG_BOARD_LATE_INIT

 /* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */

/* I2C Configuration */
#define CONFIG_SYS_I2C_SPEED		100000

#define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
#define EEPROM_ADDR_DDR3 0x90
#define EEPROM_ADDR_CHIP 0x120

#undef CONFIG_MII
#undef CONFIG_PHY_GIGE
#define CONFIG_PHY_SMSC

#define CONFIG_FACTORYSET

/* Watchdog */
#define CONFIG_OMAP_WATCHDOG

/* Define own nand partitions */
#define CONFIG_ENV_OFFSET_REDUND    0x2E0000
#define CONFIG_ENV_SIZE_REDUND      0x2000
#define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)

#define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V2

#ifndef CONFIG_SPL_BUILD

/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"hostname=draco\0" \
	"ubi_off=2048\0"\
	"nand_img_size=0x400000\0" \
	"optargs=\0" \
	"preboot=draco_led 0\0" \
	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	CONFIG_ENV_SETTINGS_V2 \
	CONFIG_ENV_SETTINGS_NAND_V2

#ifndef CONFIG_RESTORE_FLASH
/* set to negative value for no autoboot */

#define CONFIG_BOOTCOMMAND \
"if dfubutton; then " \
	"run dfu_start; " \
	"reset; " \
"fi;" \
"run nand_boot;" \
"run nand_boot_backup;" \
"reset;"

#else

#define CONFIG_BOOTCOMMAND			\
	"setenv autoload no; "			\
	"dhcp; "				\
	"if tftp 80000000 debrick.scr; then "	\
		"source 80000000; "		\
	"fi"
#endif
#endif	/* CONFIG_SPL_BUILD */
#endif	/* ! __CONFIG_DRACO_H */
Commit	Line	Data
f04776b6 ES	1	/*
	2	* (C) Copyright 2013 Siemens Schweiz AG
	3	* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
	4	*
	5	* Based on:
	6	* U-Boot file:/include/configs/am335x_evm.h
	7	*
	8	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	9	*
	10	* SPDX-License-Identifier: GPL-2.0+
	11	*/
	12
	13	#ifndef __CONFIG_DRACO_H
	14	#define __CONFIG_DRACO_H
	15
	16	#define CONFIG_SIEMENS_DRACO
	17	#define MACH_TYPE_DRACO 4314
	18	#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_DRACO
	19
	20	#include "siemens-am33x-common.h"
	21
61159b76	22	#define CONFIG_SYS_MPUCLK 300
f04776b6 ES	23	#define DDR_PLL_FREQ 303
	24	#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
	25
61159b76	26	#define BOARD_DFU_BUTTON_GPIO 27 /* Use as default */
f04776b6 ES	27	#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
f04776b6 ES	28
61159b76 HS	29	#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	30	"button_dfu0=27\0" \
	31	"led0=103,1,0\0" \
	32	"led1=64,0,1\0"
	33
f04776b6	34	#undef CONFIG_DOS_PARTITION
f04776b6	35
61159b76	36	#define CONFIG_BOARD_LATE_INIT
f04776b6 ES	37
	38	/* Physical Memory Map */
	39	#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
	40
	41	/* I2C Configuration */
	42	#define CONFIG_SYS_I2C_SPEED 100000
	43
	44	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	45	#define EEPROM_ADDR_DDR3 0x90
	46	#define EEPROM_ADDR_CHIP 0x120
	47
f04776b6 ES	48	#undef CONFIG_MII
	49	#undef CONFIG_PHY_GIGE
	50	#define CONFIG_PHY_SMSC
	51
	52	#define CONFIG_FACTORYSET
	53
	54	/* Watchdog */
	55	#define CONFIG_OMAP_WATCHDOG
	56
61159b76 HS	57	/* Define own nand partitions */
	58	#define CONFIG_ENV_OFFSET_REDUND 0x2E0000
	59	#define CONFIG_ENV_SIZE_REDUND 0x2000
	60	#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
	61
61159b76 HS	62	#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2
61159b76 HS	63
f04776b6 ES	64	#ifndef CONFIG_SPL_BUILD
	65
	66	/* Default env settings */
	67	#define CONFIG_EXTRA_ENV_SETTINGS \
61159b76	68	"hostname=draco\0" \
6b3943f1	69	"ubi_off=2048\0"\
f04776b6 ES	70	"nand_img_size=0x400000\0" \
f04776b6 ES	71	"optargs=\0" \
61159b76 HS	72	"preboot=draco_led 0\0" \
	73	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	74	CONFIG_ENV_SETTINGS_V2 \
	75	CONFIG_ENV_SETTINGS_NAND_V2
f04776b6 ES	76
	77	#ifndef CONFIG_RESTORE_FLASH
	78	/* set to negative value for no autoboot */
f04776b6 ES	79
	80	#define CONFIG_BOOTCOMMAND \
	81	"if dfubutton; then " \
	82	"run dfu_start; " \
	83	"reset; " \
	84	"fi;" \
	85	"run nand_boot;" \
61159b76	86	"run nand_boot_backup;" \
f04776b6 ES	87	"reset;"
f04776b6 ES	88
f04776b6	89	#else
f04776b6 ES	90
	91	#define CONFIG_BOOTCOMMAND \
	92	"setenv autoload no; " \
	93	"dhcp; " \
	94	"if tftp 80000000 debrick.scr; then " \
	95	"source 80000000; " \
	96	"fi"
	97	#endif
	98	#endif /* CONFIG_SPL_BUILD */
	99	#endif /* ! __CONFIG_DRACO_H */