projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 626f048b MK |
1 | /* |
| 2 | * Board configuration file for Dragonboard 410C | |
| 3 | * | |
| 4 | * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com> | |
| 5 | * | |
| 6 | * SPDX-License-Identifier: GPL-2.0+ | |
| 7 | */ | |
| 8 | ||
| 9 | #ifndef __CONFIGS_DRAGONBOARD410C_H | |
| 10 | #define __CONFIGS_DRAGONBOARD410C_H | |
| 11 | ||
| 12 | #include <linux/sizes.h> | |
| 13 | #include <asm/arch/sysmap-apq8016.h> | |
| 14 | ||
| 15 | #define CONFIG_IDENT_STRING "\nQualcomm-DragonBoard 410C" | |
| 16 | ||
| 17 | #define CONFIG_MISC_INIT_R /* To stop autoboot */ | |
| 18 | ||
| 19 | /* Physical Memory Map */ | |
| 20 | #define CONFIG_NR_DRAM_BANKS 1 | |
| 21 | #define PHYS_SDRAM_1 0x80000000 | |
| 22 | /* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/ | |
| 23 | #define PHYS_SDRAM_1_SIZE 0x3da00000 | |
| 24 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 | |
| 25 | #define CONFIG_SYS_TEXT_BASE 0x80080000 | |
| 26 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) | |
| 27 | #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) | |
| 28 | #define CONFIG_SYS_BOOTM_LEN 0x1000000 /* 16MB max kernel size */ | |
| 29 | ||
| 30 | /* UART */ | |
| 31 | #define CONFIG_BAUDRATE 115200 | |
| 32 | ||
| 33 | /* Generic Timer Definitions */ | |
| 34 | #define COUNTER_FREQUENCY 19000000 | |
| 35 | ||
| 36 | /* This are needed to have proper mmc support */ | |
| 37 | #define CONFIG_MMC | |
| 38 | #define CONFIG_GENERIC_MMC | |
| 39 | #define CONFIG_SDHCI | |
| 40 | ||
| 41 | #define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds" | |
| 42 | ||
| 43 | /* Fixup - in init code we switch from device to host mode, | |
| 44 | * it has to be done after each HCD reset */ | |
| 45 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 46 | ||
| 47 | #define CONFIG_USB_HOST_ETHER /* Enable USB Networking */ | |
| 48 | ||
| 49 | /* Support all possible USB ethernet dongles */ | |
| 50 | #define CONFIG_USB_ETHER_DM9601 | |
| 51 | #define CONFIG_USB_ETHER_ASIX | |
| 52 | #define CONFIG_USB_ETHER_ASIX88179 | |
| 53 | #define CONFIG_USB_ETHER_MCS7830 | |
| 54 | #define CONFIG_USB_ETHER_SMSC95XX | |
| 55 | ||
| 56 | /* Libraries */ | |
| 57 | #define CONFIG_MD5 | |
| 58 | ||
| 59 | /* Extra Commands */ | |
| 626f048b | 60 | #define CONFIG_CMD_ENV |
| 626f048b MK |
61 | #define CONFIG_CMD_GPT |
| 62 | #define CONFIG_CMD_MD5SUM | |
| 626f048b MK |
63 | /* Enable that for switching of boot partitions */ |
| 64 | /* Disabled by default as some sub-commands can brick eMMC */ | |
| 65 | /*#define CONFIG_SUPPORT_EMMC_BOOT */ | |
| 66 | #define CONFIG_CMD_PART | |
| 67 | #define CONFIG_CMD_REGINFO /* Register dump */ | |
| 68 | #define CONFIG_CMD_TFTP | |
| 626f048b MK |
69 | #define CONFIG_CMD_UNZIP |
| 70 | ||
| 71 | /* Partition table support */ | |
| 72 | #define HAVE_BLOCK_DEVICE /* Needed for partition commands */ | |
| 73 | #define CONFIG_PARTITION_UUIDS | |
| 74 | ||
| 75 | #include <config_distro_defaults.h> | |
| 76 | ||
| 77 | /* BOOTP options */ | |
| 78 | #define CONFIG_BOOTP_BOOTFILESIZE | |
| 79 | ||
| 80 | /* Environment - Boot*/ | |
| 81 | #define CONFIG_BOOTARGS "console=ttyMSM0,115200n8" | |
| 82 | ||
| 83 | #define BOOT_TARGET_DEVICES(func) \ | |
| 84 | func(USB, usb, 0) \ | |
| 626f048b | 85 | func(MMC, mmc, 1) \ |
| 5a6f5766 | 86 | func(MMC, mmc, 0) \ |
| 626f048b MK |
87 | func(DHCP, dhcp, na) |
| 88 | ||
| 89 | #include <config_distro_bootcmd.h> | |
| 90 | ||
| 91 | /* Does what recovery does */ | |
| 92 | #define REFLASH(file, part) \ | |
| 93 | "part start mmc 0 "#part" start && "\ | |
| 94 | "part size mmc 0 "#part" size && "\ | |
| 95 | "tftp $loadaddr "#file" && " \ | |
| 96 | "mmc write $loadaddr $start $size && " | |
| 97 | ||
| 626f048b MK |
98 | #define CONFIG_ENV_REFLASH \ |
| 99 | "mmc dev 0 && "\ | |
| 100 | "usb start && "\ | |
| 101 | "dhcp && "\ | |
| 102 | "tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\ | |
| 103 | "mmc write $loadaddr 0 43 && " \ | |
| 104 | "mmc rescan && "\ | |
| 105 | REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\ | |
| 106 | REFLASH(dragonboard/rescue/sbl1.mbn, 2)\ | |
| 107 | REFLASH(dragonboard/rescue/rpm.mbn, 3)\ | |
| 108 | REFLASH(dragonboard/rescue/tz.mbn, 4)\ | |
| 109 | REFLASH(dragonboard/rescue/hyp.mbn, 5)\ | |
| 110 | REFLASH(dragonboard/rescue/sec.dat, 6)\ | |
| 111 | REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\ | |
| 112 | REFLASH(dragonboard/u-boot.img, 8)\ | |
| 113 | "usb stop &&"\ | |
| 114 | "echo Reflash completed" | |
| 115 | ||
| 116 | /* Environment */ | |
| 117 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 118 | "reflash="CONFIG_ENV_REFLASH"\0"\ | |
| 119 | "loadaddr=0x81000000\0" \ | |
| 120 | "fdt_high=0xffffffffffffffff\0" \ | |
| 121 | "initrd_high=0xffffffffffffffff\0" \ | |
| 122 | "linux_image=Image\0" \ | |
| 093685a9 AF |
123 | "kernel_addr_r=0x81000000\0"\ |
| 124 | "fdtfile=apq8016-sbc.dtb\0" \ | |
| 125 | "fdt_addr_r=0x83000000\0"\ | |
| 126 | "ramdisk_addr_r=0x84000000\0"\ | |
| a3e2efcb RSA |
127 | "scriptaddr=0x90000000\0"\ |
| 128 | "pxefile_addr_r=0x90100000\0"\ | |
| 626f048b MK |
129 | BOOTENV |
| 130 | ||
| 131 | #define CONFIG_ENV_IS_NOWHERE | |
| 333463d6 | 132 | #define CONFIG_ENV_SIZE 0x2000 |
| 626f048b MK |
133 | #define CONFIG_ENV_VARS_UBOOT_CONFIG |
| 134 | #define CONFIG_SYS_NO_FLASH | |
| 135 | ||
| 136 | /* Size of malloc() pool */ | |
| 137 | #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M) | |
| 138 | ||
| 139 | /* Monitor Command Prompt */ | |
| 140 | #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ | |
| 141 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ | |
| 142 | sizeof(CONFIG_SYS_PROMPT) + 16) | |
| 143 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
| 144 | #define CONFIG_SYS_MAXARGS 64 /* max command args */ | |
| 145 | ||
| 146 | #endif |