[people/ms/u-boot.git] / include / configs / dreamplug.h

/*
 * (C) Copyright 2011
 * Jason Cooper <u-boot@lakedaemon.net>
 *
 * Based on work by:
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Siddarth Gore <gores@marvell.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_DREAMPLUG_H
#define _CONFIG_DREAMPLUG_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
#define CONFIG_MACH_TYPE	MACH_TYPE_DREAMPLUG

/*
 * Commands configuration
 */

/*
 * mv-plug-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-plug-common.h"

/*
 *  Environment variables configurations
 */
#ifdef CONFIG_SPI_FLASH
#define CONFIG_ENV_IS_IN_SPI_FLASH	1
#define CONFIG_ENV_SECT_SIZE		0x10000	/* 64k */
#else
#define CONFIG_ENV_IS_NOWHERE		1	/* if env in SDRAM */
#endif

#ifdef CONFIG_CMD_SF
#define CONFIG_HARD_SPI			1
#define CONFIG_KIRKWOOD_SPI		1
#define CONFIG_ENV_SPI_BUS		0
#define CONFIG_ENV_SPI_CS		0
#define CONFIG_ENV_SPI_MAX_HZ		50000000 /* 50 MHz */
#endif

/*
 * max 4k env size is enough, but in case of nand
 * it has to be rounded to sector size
 */
#define CONFIG_ENV_SIZE			0x1000  /* 4k */
#define CONFIG_ENV_ADDR			0x100000
#define CONFIG_ENV_OFFSET		0x100000 /* env starts here */

/*
 * Default environment variables
 */
#define CONFIG_BOOTCOMMAND		"setenv ethact egiga0; " \
	"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
	"bootm 0x6400000;"

#define CONFIG_EXTRA_ENV_SETTINGS	\
	"x_bootcmd_ethernet=ping 192.168.2.1\0"	\
	"x_bootcmd_usb=usb start\0"	\
	"x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
	"x_bootargs=console=ttyS0,115200\0"	\
	"x_bootargs_root=root=/dev/sda2 rootdelay=10\0"

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
#define CONFIG_PHY_BASE_ADR	0
#endif /* CONFIG_CMD_NET */

/*
 * SATA Driver configuration
 */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
#endif /*CONFIG_MVSATA_IDE*/

#endif /* _CONFIG_DREAMPLUG_H */
Commit	Line	Data
2e0c1c7d JC	1	/*
	2	* (C) Copyright 2011
	3	* Jason Cooper <u-boot@lakedaemon.net>
	4	*
	5	* Based on work by:
	6	* Marvell Semiconductor <www.marvell.com>
	7	* Written-by: Siddarth Gore <gores@marvell.com>
	8	*
1a459660	9	* SPDX-License-Identifier: GPL-2.0+
2e0c1c7d JC	10	*/
	11
	12	#ifndef _CONFIG_DREAMPLUG_H
	13	#define _CONFIG_DREAMPLUG_H
	14
2e0c1c7d JC	15	/*
	16	* High Level Configuration Options (easy to change)
	17	*/
	18	#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
2e0c1c7d	19	#define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
f6b1f665	20
2e0c1c7d JC	21	/*
	22	* Commands configuration
	23	*/
2e0c1c7d JC	24
2e0c1c7d JC	25	/*
38c0e864	26	* mv-plug-common.h should be defined after CMD configs since it used them
2e0c1c7d JC	27	* to enable certain macros
2e0c1c7d JC	28	*/
38c0e864	29	#include "mv-plug-common.h"
2e0c1c7d JC	30
	31	/*
	32	* Environment variables configurations
	33	*/
	34	#ifdef CONFIG_SPI_FLASH
	35	#define CONFIG_ENV_IS_IN_SPI_FLASH 1
	36	#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
	37	#else
	38	#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
	39	#endif
	40
	41	#ifdef CONFIG_CMD_SF
2e0c1c7d JC	42	#define CONFIG_HARD_SPI 1
2e0c1c7d JC	43	#define CONFIG_KIRKWOOD_SPI 1
2e0c1c7d JC	44	#define CONFIG_ENV_SPI_BUS 0
	45	#define CONFIG_ENV_SPI_CS 0
	46	#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
	47	#endif
	48
	49	/*
	50	* max 4k env size is enough, but in case of nand
	51	* it has to be rounded to sector size
	52	*/
	53	#define CONFIG_ENV_SIZE 0x1000 /* 4k */
	54	#define CONFIG_ENV_ADDR 0x100000
	55	#define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
	56
	57	/*
	58	* Default environment variables
	59	*/
	60	#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
	61	"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
	62	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
	63	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
	64	"bootm 0x6400000;"
	65
	66	#define CONFIG_EXTRA_ENV_SETTINGS \
	67	"x_bootcmd_ethernet=ping 192.168.2.1\0" \
	68	"x_bootcmd_usb=usb start\0" \
	69	"x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
	70	"x_bootargs=console=ttyS0,115200\0" \
	71	"x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
	72
	73	/*
	74	* Ethernet Driver configuration
	75	*/
	76	#ifdef CONFIG_CMD_NET
	77	#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
	78	#define CONFIG_PHY_BASE_ADR 0
	79	#endif /* CONFIG_CMD_NET */
	80
	81	/*
	82	* SATA Driver configuration
	83	*/
	84	#ifdef CONFIG_MVSATA_IDE
	85	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
	86	#endif /CONFIG_MVSATA_IDE/
	87
2e0c1c7d	88	#endif /* _CONFIG_DREAMPLUG_H */