[people/ms/u-boot.git] / include / configs / ecovec.h

/*
 * Configuation settings for the Renesas Solutions ECOVEC board
 *
 * Copyright (C) 2009 - 2011 Renesas Solutions Corp.
 * Copyright (C) 2009 Kuninori Morimoto <morimoto.kuninori@renesas.com>
 * Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __ECOVEC_H
#define __ECOVEC_H

/*
 *  Address      Interface        BusWidth
 *-----------------------------------------
 *  0x0000_0000  U-Boot           16bit
 *  0x0004_0000  Linux romImage   16bit
 *  0x0014_0000  MTD for Linux    16bit
 *  0x0400_0000  Internal I/O     16/32bit
 *  0x0800_0000  DRAM             32bit
 *  0x1800_0000  MFI              16bit
 */

#define CONFIG_CPU_SH7724	1
#define CONFIG_ECOVEC		1

#define CONFIG_ECOVEC_ROMIMAGE_ADDR 0xA0040000
#define CONFIG_SYS_TEXT_BASE 0x8FFC0000

#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_ENV

#define CONFIG_DOS_PARTITION

#define CONFIG_BAUDRATE		115200
#define CONFIG_BOOTARGS		"console=ttySC0,115200"

#define CONFIG_DISPLAY_BOARDINFO
#undef  CONFIG_SHOW_BOOT_PROGRESS

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_SH
#define CONFIG_SYS_I2C_SLAVE	0x7F
#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 2
#define CONFIG_SYS_I2C_SH_BASE0	0xA4470000
#define CONFIG_SYS_I2C_SH_SPEED0	100000
#define CONFIG_SYS_I2C_SH_BASE1	0xA4750000
#define CONFIG_SYS_I2C_SH_SPEED1	100000
#define CONFIG_SH_I2C_DATA_HIGH	4
#define CONFIG_SH_I2C_DATA_LOW 	5
#define CONFIG_SH_I2C_CLOCK  	41666666

/* Ether */
#define CONFIG_SH_ETHER 1
#define CONFIG_SH_ETHER_USE_PORT (0)
#define CONFIG_SH_ETHER_PHY_ADDR (0x1f)
#define CONFIG_PHY_SMSC 1
#define CONFIG_PHYLIB
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII

/* USB / R8A66597 */
#define CONFIG_USB_R8A66597_HCD
#define CONFIG_R8A66597_BASE_ADDR   0xA4D80000
#define CONFIG_R8A66597_XTAL        0x0000  /* 12MHz */
#define CONFIG_R8A66597_LDRV        0x8000  /* 3.3V */
#define CONFIG_R8A66597_ENDIAN      0x0000  /* little */
#define CONFIG_SUPERH_ON_CHIP_R8A66597

/* undef to save memory	*/
#define CONFIG_SYS_LONGHELP
/* Monitor Command Prompt */
/* Buffer size for input from the Console */
#define CONFIG_SYS_CBSIZE		256
/* Buffer size for Console output */
#define CONFIG_SYS_PBSIZE		256
/* max args accepted for monitor commands */
#define CONFIG_SYS_MAXARGS		16
/* Buffer size for Boot Arguments passed to kernel */
#define CONFIG_SYS_BARGSIZE	512
/* List of legal baudrate settings for this board */
#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }

/* SCIF */
#define CONFIG_SCIF_CONSOLE	1
#define CONFIG_SCIF		1
#define CONFIG_CONS_SCIF0	1

/* Suppress display of console information at boot */

/* SDRAM */
#define CONFIG_SYS_SDRAM_BASE	(0x88000000)
#define CONFIG_SYS_SDRAM_SIZE	(256 * 1024 * 1024)
#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)

#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END	 (CONFIG_SYS_MEMTEST_START + 200 * 1024 * 1024)
/* Enable alternate, more extensive, memory test */
#undef  CONFIG_SYS_ALT_MEMTEST
/* Scratch address used by the alternate memory test */
#undef  CONFIG_SYS_MEMTEST_SCRATCH

/* Enable temporary baudrate change while serial download */
#undef  CONFIG_SYS_LOADS_BAUD_CHANGE

/* FLASH */
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_FLASH_CFI
#undef  CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_BASE	(0xA0000000)
#define CONFIG_SYS_MAX_FLASH_SECT	512

/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }

/* Timeout for Flash erase operations (in ms) */
#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
/* Timeout for Flash write operations (in ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
/* Timeout for Flash set sector lock bit operations (in ms) */
#define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)
/* Timeout for Flash clear lock bit operations (in ms) */
#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)

/*
 * Use hardware flash sectors protection instead
 * of U-Boot software protection
 */
#undef  CONFIG_SYS_FLASH_PROTECTION
#undef  CONFIG_SYS_DIRECT_FLASH_TFTP

/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
/* Monitor size */
#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
/* Size of DRAM reserved for malloc() use */
#define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
#define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)

/* ENV setting */
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_OVERWRITE	1
#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
#define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)

/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 41666666
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_TMU_CLK_DIV      4

#endif	/* __ECOVEC_H */
Commit	Line	Data
6d1d5cf9 NI	1	/*
	2	* Configuation settings for the Renesas Solutions ECOVEC board
	3	*
	4	* Copyright (C) 2009 - 2011 Renesas Solutions Corp.
	5	* Copyright (C) 2009 Kuninori Morimoto <morimoto.kuninori@renesas.com>
	6	* Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
	7	*
1a459660	8	* SPDX-License-Identifier: GPL-2.0+
6d1d5cf9 NI	9	*/
	10
	11	#ifndef __ECOVEC_H
	12	#define __ECOVEC_H
	13
	14	/*
	15	* Address Interface BusWidth
	16	*-----------------------------------------
	17	* 0x0000_0000 U-Boot 16bit
	18	* 0x0004_0000 Linux romImage 16bit
	19	* 0x0014_0000 MTD for Linux 16bit
	20	* 0x0400_0000 Internal I/O 16/32bit
	21	* 0x0800_0000 DRAM 32bit
	22	* 0x1800_0000 MFI 16bit
	23	*/
	24
6d1d5cf9	25	#define CONFIG_CPU_SH7724 1
6d1d5cf9 NI	26	#define CONFIG_ECOVEC 1
	27
	28	#define CONFIG_ECOVEC_ROMIMAGE_ADDR 0xA0040000
	29	#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
	30
6d1d5cf9 NI	31	#define CONFIG_CMD_SDRAM
6d1d5cf9 NI	32	#define CONFIG_CMD_ENV
6d1d5cf9	33
6d1d5cf9 NI	34	#define CONFIG_DOS_PARTITION
	35
	36	#define CONFIG_BAUDRATE 115200
6d1d5cf9 NI	37	#define CONFIG_BOOTARGS "console=ttySC0,115200"
6d1d5cf9 NI	38
18a40e84	39	#define CONFIG_DISPLAY_BOARDINFO
6d1d5cf9 NI	40	#undef CONFIG_SHOW_BOOT_PROGRESS
	41
	42	/* I2C */
2035d77d NI	43	#define CONFIG_SYS_I2C
2035d77d NI	44	#define CONFIG_SYS_I2C_SH
6d1d5cf9	45	#define CONFIG_SYS_I2C_SLAVE 0x7F
2035d77d NI	46	#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 2
	47	#define CONFIG_SYS_I2C_SH_BASE0 0xA4470000
	48	#define CONFIG_SYS_I2C_SH_SPEED0 100000
	49	#define CONFIG_SYS_I2C_SH_BASE1 0xA4750000
	50	#define CONFIG_SYS_I2C_SH_SPEED1 100000
6d1d5cf9 NI	51	#define CONFIG_SH_I2C_DATA_HIGH 4
	52	#define CONFIG_SH_I2C_DATA_LOW 5
	53	#define CONFIG_SH_I2C_CLOCK 41666666
6d1d5cf9 NI	54
6d1d5cf9 NI	55	/* Ether */
6d1d5cf9 NI	56	#define CONFIG_SH_ETHER 1
	57	#define CONFIG_SH_ETHER_USE_PORT (0)
	58	#define CONFIG_SH_ETHER_PHY_ADDR (0x1f)
e50edf90	59	#define CONFIG_PHY_SMSC 1
6d1d5cf9 NI	60	#define CONFIG_PHYLIB
	61	#define CONFIG_BITBANGMII
	62	#define CONFIG_BITBANGMII_MULTI
a80a6619	63	#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
6d1d5cf9 NI	64
	65	/* USB / R8A66597 */
	66	#define CONFIG_USB_R8A66597_HCD
	67	#define CONFIG_R8A66597_BASE_ADDR 0xA4D80000
	68	#define CONFIG_R8A66597_XTAL 0x0000 /* 12MHz */
	69	#define CONFIG_R8A66597_LDRV 0x8000 /* 3.3V */
	70	#define CONFIG_R8A66597_ENDIAN 0x0000 /* little */
	71	#define CONFIG_SUPERH_ON_CHIP_R8A66597
	72
	73	/* undef to save memory */
	74	#define CONFIG_SYS_LONGHELP
	75	/* Monitor Command Prompt */
6d1d5cf9 NI	76	/* Buffer size for input from the Console */
	77	#define CONFIG_SYS_CBSIZE 256
	78	/* Buffer size for Console output */
	79	#define CONFIG_SYS_PBSIZE 256
	80	/* max args accepted for monitor commands */
	81	#define CONFIG_SYS_MAXARGS 16
	82	/* Buffer size for Boot Arguments passed to kernel */
	83	#define CONFIG_SYS_BARGSIZE 512
	84	/* List of legal baudrate settings for this board */
	85	#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
	86
	87	/* SCIF */
	88	#define CONFIG_SCIF_CONSOLE 1
	89	#define CONFIG_SCIF 1
	90	#define CONFIG_CONS_SCIF0 1
	91
	92	/* Suppress display of console information at boot */
6d1d5cf9 NI	93
	94	/* SDRAM */
	95	#define CONFIG_SYS_SDRAM_BASE (0x88000000)
	96	#define CONFIG_SYS_SDRAM_SIZE (256 * 1024 * 1024)
	97	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
	98
	99	#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
	100	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 200 * 1024 * 1024)
	101	/* Enable alternate, more extensive, memory test */
	102	#undef CONFIG_SYS_ALT_MEMTEST
	103	/* Scratch address used by the alternate memory test */
	104	#undef CONFIG_SYS_MEMTEST_SCRATCH
	105
	106	/* Enable temporary baudrate change while serial download */
	107	#undef CONFIG_SYS_LOADS_BAUD_CHANGE
	108
	109	/* FLASH */
	110	#define CONFIG_FLASH_CFI_DRIVER 1
	111	#define CONFIG_SYS_FLASH_CFI
	112	#undef CONFIG_SYS_FLASH_QUIET_TEST
	113	#define CONFIG_SYS_FLASH_EMPTY_INFO
	114	#define CONFIG_SYS_FLASH_BASE (0xA0000000)
	115	#define CONFIG_SYS_MAX_FLASH_SECT 512
	116
	117	/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
	118	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	119	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
	120
	121	/* Timeout for Flash erase operations (in ms) */
	122	#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000)
	123	/* Timeout for Flash write operations (in ms) */
	124	#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000)
	125	/* Timeout for Flash set sector lock bit operations (in ms) */
	126	#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000)
	127	/* Timeout for Flash clear lock bit operations (in ms) */
	128	#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000)
	129
	130	/*
	131	* Use hardware flash sectors protection instead
	132	* of U-Boot software protection
	133	*/
	134	#undef CONFIG_SYS_FLASH_PROTECTION
	135	#undef CONFIG_SYS_DIRECT_FLASH_TFTP
	136
	137	/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
	138	#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
	139	/* Monitor size */
	140	#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
	141	/* Size of DRAM reserved for malloc() use */
	142	#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
6d1d5cf9 NI	143	#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
	144
	145	/* ENV setting */
	146	#define CONFIG_ENV_IS_IN_FLASH
	147	#define CONFIG_ENV_OVERWRITE 1
	148	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
	149	#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
	150	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
	151	/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
	152	#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
	153	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
	154
	155	/* Board Clock */
	156	#define CONFIG_SYS_CLK_FREQ 41666666
684a501e NI	157	#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
684a501e NI	158	#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
6d1d5cf9	159	#define CONFIG_SYS_TMU_CLK_DIV 4
6d1d5cf9 NI	160
6d1d5cf9 NI	161	#endif /* __ECOVEC_H */