[people/ms/u-boot.git] / include / configs / el6x_common.h

/*
 * Copyright (C) Stefano Babic <sbabic@denx.de>
 *
 * Configuration settings for the E+L i.MX6Q DO82 board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __EL6Q_COMMON_CONFIG_H
#define __EL6Q_COMMON_CONFIG_H

#define CONFIG_BOARD_NAME		EL6Q

#include <config_distro_defaults.h>
#include "mx6_common.h"

#define CONFIG_IMX_THERMAL

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT

#define CONFIG_MXC_UART

#ifdef CONFIG_SPL
#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
#define CONFIG_SPL_SPI_LOAD
#include "imx6_spl.h"
#endif

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	2

/* I2C config */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED			100000

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

/* Commands */
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		3
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_MXC_UART_BASE	UART2_BASE
#define CONFIG_BAUDRATE             115200

/* Command definition */

#define CONFIG_CMD_BMODE
#define CONFIG_CMD_BOOTZ
#undef CONFIG_CMD_IMLS

#define CONFIG_BOARD_NAME	EL6Q

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS                                               \
	"board="__stringify(CONFIG_BOARD_NAME)"\0"                              \
	"cma_size="__stringify(EL6Q_CMA_SIZE)"\0"                               \
	"chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0"                     \
	"console=" CONSOLE_DEV "\0"					\
	"fdtfile=undefined\0" \
	"fdt_high=0xffffffff\0" \
	"fdt_addr_r=0x18000000\0" \
	"fdt_addr=0x18000000\0" \
	"findfdt=setenv fdtfile " CONFIG_DEFAULT_FDT_FILE "\0"                  \
	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	BOOTENV

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(MMC, mmc, 1) \
	func(PXE, PXE, na) \
	func(DHCP, dhcp, na)

#define CONFIG_BOOTCOMMAND \
	   "run findfdt; " \
	   "run distro_bootcmd"

#include <config_distro_bootcmd.h>

#define CONFIG_ARP_TIMEOUT     200UL

#define CONFIG_CMD_MEMTEST

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END         0x10800000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_STACKSIZE               (128 * 1024)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_IS_IN_MMC

#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV		1
#define CONFIG_SYS_MMC_ENV_PART		2
#define CONFIG_ENV_OFFSET		0x0
#endif

#endif                         /* __EL6Q_COMMON_CONFIG_H */
Commit	Line	Data
8be4f40e SB	1	/*
	2	* Copyright (C) Stefano Babic <sbabic@denx.de>
	3	*
	4	* Configuration settings for the E+L i.MX6Q DO82 board.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __EL6Q_COMMON_CONFIG_H
	10	#define __EL6Q_COMMON_CONFIG_H
	11
	12	#define CONFIG_BOARD_NAME EL6Q
	13
	14	#include <config_distro_defaults.h>
	15	#include "mx6_common.h"
	16
	17	#define CONFIG_IMX_THERMAL
	18
	19	/* Size of malloc() pool */
	20	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
	21
	22	#define CONFIG_BOARD_EARLY_INIT_F
	23	#define CONFIG_BOARD_LATE_INIT
	24
	25	#define CONFIG_MXC_UART
	26
	27	#ifdef CONFIG_SPL
8be4f40e SB	28	#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
	29	#define CONFIG_SPL_SPI_LOAD
	30	#include "imx6_spl.h"
	31	#endif
	32
	33	/* MMC Configs */
	34	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	35	#define CONFIG_SYS_FSL_USDHC_NUM 2
	36
	37	/* I2C config */
	38	#define CONFIG_SYS_I2C
	39	#define CONFIG_SYS_I2C_MXC
	40	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	41	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	42	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	43	#define CONFIG_SYS_I2C_SPEED 100000
	44
	45	/* PMIC */
	46	#define CONFIG_POWER
	47	#define CONFIG_POWER_I2C
	48	#define CONFIG_POWER_PFUZE100
	49	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
	50
	51	/* Commands */
	52	#define CONFIG_MXC_SPI
	53	#define CONFIG_SF_DEFAULT_BUS 3
	54	#define CONFIG_SF_DEFAULT_CS 0
	55	#define CONFIG_SF_DEFAULT_SPEED 20000000
	56	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	57
	58	/* allow to overwrite serial and ethaddr */
	59	#define CONFIG_ENV_OVERWRITE
	60	#define CONFIG_MXC_UART_BASE UART2_BASE
	61	#define CONFIG_BAUDRATE 115200
	62
	63	/* Command definition */
	64
	65	#define CONFIG_CMD_BMODE
	66	#define CONFIG_CMD_BOOTZ
	67	#undef CONFIG_CMD_IMLS
	68
	69	#define CONFIG_BOARD_NAME EL6Q
	70
	71	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	72	#define CONFIG_EXTRA_ENV_SETTINGS \
	73	"board="__stringify(CONFIG_BOARD_NAME)"\0" \
	74	"cma_size="__stringify(EL6Q_CMA_SIZE)"\0" \
	75	"chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0" \
12ca05a3	76	"console=" CONSOLE_DEV "\0" \
8be4f40e SB	77	"fdtfile=undefined\0" \
	78	"fdt_high=0xffffffff\0" \
	79	"fdt_addr_r=0x18000000\0" \
	80	"fdt_addr=0x18000000\0" \
	81	"findfdt=setenv fdtfile " CONFIG_DEFAULT_FDT_FILE "\0" \
	82	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	83	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
	84	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	85	BOOTENV
	86
	87	#define BOOT_TARGET_DEVICES(func) \
	88	func(MMC, mmc, 0) \
	89	func(MMC, mmc, 1) \
	90	func(PXE, PXE, na) \
	91	func(DHCP, dhcp, na)
	92
	93	#define CONFIG_BOOTCOMMAND \
	94	"run findfdt; " \
	95	"run distro_bootcmd"
	96
	97	#include <config_distro_bootcmd.h>
	98
	99	#define CONFIG_ARP_TIMEOUT 200UL
	100
	101	#define CONFIG_CMD_MEMTEST
	102
	103	#define CONFIG_SYS_MEMTEST_START 0x10000000
	104	#define CONFIG_SYS_MEMTEST_END 0x10800000
	105	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	106
	107	#define CONFIG_STACKSIZE (128 * 1024)
	108
	109	/* Physical Memory Map */
	110	#define CONFIG_NR_DRAM_BANKS 1
	111	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	112
	113	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	114	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	115	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	116
	117	#define CONFIG_SYS_INIT_SP_OFFSET \
	118	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	119	#define CONFIG_SYS_INIT_SP_ADDR \
	120	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	121
	122	/* FLASH and environment organization */
	123	#define CONFIG_SYS_NO_FLASH
	124
	125	#define CONFIG_ENV_SIZE (8 * 1024)
	126
	127	#define CONFIG_ENV_IS_IN_MMC
	128
	129	#if defined(CONFIG_ENV_IS_IN_MMC)
	130	#define CONFIG_SYS_MMC_ENV_DEV 1
	131	#define CONFIG_SYS_MMC_ENV_PART 2
	132	#define CONFIG_ENV_OFFSET 0x0
	133	#endif
	134
	135	#endif /* __EL6Q_COMMON_CONFIG_H */