[people/ms/u-boot.git] / include / configs / ge_bx50v3.h

/*
 * Copyright (C) 2015 Timesys Corporation
 * Copyright (C) 2015 General Electric Company
 * Copyright (C) 2014 Advantech
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the GE MX6Q Bx50v3 boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __GE_BX50V3_CONFIG_H
#define __GE_BX50V3_CONFIG_H

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

#define BX50V3_BOOTARGS_EXTRA
#if defined(CONFIG_TARGET_GE_B450V3)
#define CONFIG_BOARD_NAME	"General Electric B450v3"
#elif defined(CONFIG_TARGET_GE_B650V3)
#define CONFIG_BOARD_NAME	"General Electric B650v3"
#elif defined(CONFIG_TARGET_GE_B850V3)
#define CONFIG_BOARD_NAME	"General Electric B850v3"
#undef BX50V3_BOOTARGS_EXTRA
#define BX50V3_BOOTARGS_EXTRA	"video=DP-1:1024x768@60 " \
				"video=HDMI-A-1:1024x768@60 "
#else
#define CONFIG_BOARD_NAME	"General Electric BA16 Generic"
#endif

#define CONFIG_MXC_UART_BASE	UART3_BASE
#define CONSOLE_DEV	"ttymxc2"

#define CONFIG_SUPPORT_EMMC_BOOT


#include "mx6_common.h"
#include <linux/sizes.h>

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART

#define CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP

/* SATA Configs */
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_DOS_PARTITION

/* USB Configs */
#ifdef CONFIG_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_USB_GADGET_MASS_STORAGE
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_G_DNL_VENDOR_NUM   0x0525
#define CONFIG_G_DNL_PRODUCT_NUM  0xa4a5
#define CONFIG_G_DNL_MANUFACTURER "Advantech"
#endif

/* Networking Configs */
#ifdef CONFIG_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME		"FEC"
#define CONFIG_FEC_MXC_PHYADDR		4
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS
#endif

/* Serial Flash */
#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED	20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#endif

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	1
#define CONFIG_BAUDRATE	115200

/* Command definition */
#define CONFIG_CMD_BMODE

#define CONFIG_LOADADDR	0x12000000
#define CONFIG_SYS_TEXT_BASE	0x17800000

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=/boot/uImage\0" \
	"uboot=u-boot.imx\0" \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=yes\0" \
	"ip_dyn=yes\0" \
	"console=" CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"sddev=0\0" \
	"emmcdev=1\0" \
	"partnum=1\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"update_sf_uboot=" \
		"if tftp $loadaddr $uboot; then " \
			"sf probe; " \
			"sf erase 0 0xC0000; " \
			"sf write $loadaddr 0x400 $filesize; " \
			"echo 'U-Boot upgraded. Please reset'; " \
		"fi\0" \
	"setargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/${rootdev} rw rootwait cma=128M " \
		BX50V3_BOOTARGS_EXTRA "\0" \
	"loadbootscript=" \
		"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
		" source\0" \
	"loadimage=" \
		"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	"loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	"tryboot=" \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run doboot; " \
			"fi; " \
		"fi;\0" \
	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
		"run setargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \

#define CONFIG_MMCBOOTCOMMAND \
	"setenv dev mmc; " \
	"setenv rootdev mmcblk0p${partnum}; " \
	\
	"setenv devnum ${sddev}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
		"setenv rootdev mmcblk1p${partnum}; " \
	"fi; " \
	\
	"setenv devnum ${emmcdev}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
	"fi; " \

#define CONFIG_USBBOOTCOMMAND \
	"usb start; " \
	"setenv dev usb; " \
	"setenv devnum 0; " \
	"setenv rootdev sda${partnum}; " \
	"run tryboot; " \
	\
	CONFIG_MMCBOOTCOMMAND \
	"bmode usb; " \

#ifdef CONFIG_CMD_USB
#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
#else
#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
#endif

#define CONFIG_ARP_TIMEOUT     200UL

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END         0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE               (128 * 1024)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE		(8 * 1024)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED

#ifndef CONFIG_SYS_DCACHE_OFF
#endif

#define CONFIG_SYS_FSL_USDHC_NUM	3

/* Framebuffer */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#endif

#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK	66000000

#undef CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
#define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(1, 5)
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		  100000
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_MXC_I2C2
#define CONFIG_SYS_I2C_MXC_I2C3

#endif	/* __GE_BX50V3_CONFIG_H */
Commit	Line	Data
f9162b15 AB	1	/*
	2	* Copyright (C) 2015 Timesys Corporation
	3	* Copyright (C) 2015 General Electric Company
	4	* Copyright (C) 2014 Advantech
	5	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	6	*
	7	* Configuration settings for the GE MX6Q Bx50v3 boards.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __GE_BX50V3_CONFIG_H
	13	#define __GE_BX50V3_CONFIG_H
	14
	15	#include <asm/arch/imx-regs.h>
	16	#include <asm/imx-common/gpio.h>
	17
3dddc793	18	#define BX50V3_BOOTARGS_EXTRA
f9162b15 AB	19	#if defined(CONFIG_TARGET_GE_B450V3)
f9162b15 AB	20	#define CONFIG_BOARD_NAME "General Electric B450v3"
f9162b15 AB	21	#elif defined(CONFIG_TARGET_GE_B650V3)
f9162b15 AB	22	#define CONFIG_BOARD_NAME "General Electric B650v3"
f9162b15 AB	23	#elif defined(CONFIG_TARGET_GE_B850V3)
f9162b15 AB	24	#define CONFIG_BOARD_NAME "General Electric B850v3"
3dddc793 KL	25	#undef BX50V3_BOOTARGS_EXTRA
	26	#define BX50V3_BOOTARGS_EXTRA "video=DP-1:1024x768@60 " \
	27	"video=HDMI-A-1:1024x768@60 "
f9162b15 AB	28	#else
f9162b15 AB	29	#define CONFIG_BOARD_NAME "General Electric BA16 Generic"
f9162b15 AB	30	#endif
	31
	32	#define CONFIG_MXC_UART_BASE UART3_BASE
12ca05a3	33	#define CONSOLE_DEV "ttymxc2"
f9162b15	34
f9162b15 AB	35	#define CONFIG_SUPPORT_EMMC_BOOT
f9162b15 AB	36
f9162b15 AB	37
	38	#include "mx6_common.h"
	39	#include <linux/sizes.h>
	40
f9162b15 AB	41	#define CONFIG_CMDLINE_TAG
	42	#define CONFIG_SETUP_MEMORY_TAGS
	43	#define CONFIG_INITRD_TAG
	44	#define CONFIG_REVISION_TAG
	45	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
	46
	47	#define CONFIG_BOARD_EARLY_INIT_F
f9162b15 AB	48
	49	#define CONFIG_MXC_GPIO
	50	#define CONFIG_MXC_UART
	51
	52	#define CONFIG_CMD_FUSE
	53	#define CONFIG_MXC_OCOTP
	54
	55	/* SATA Configs */
aacc10c5	56	#ifdef CONFIG_CMD_SATA
f9162b15 AB	57	#define CONFIG_DWC_AHSATA
	58	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	59	#define CONFIG_DWC_AHSATA_PORT_ID 0
	60	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	61	#define CONFIG_LBA48
	62	#define CONFIG_LIBATA
aacc10c5	63	#endif
f9162b15 AB	64
	65	/* MMC Configs */
	66	#define CONFIG_FSL_ESDHC
	67	#define CONFIG_FSL_USDHC
	68	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
f9162b15 AB	69	#define CONFIG_GENERIC_MMC
f9162b15 AB	70	#define CONFIG_BOUNCE_BUFFER
f9162b15 AB	71	#define CONFIG_DOS_PARTITION
	72
	73	/* USB Configs */
fc44902a	74	#ifdef CONFIG_USB
f9162b15 AB	75	#define CONFIG_USB_EHCI
f9162b15 AB	76	#define CONFIG_USB_EHCI_MX6
f9162b15 AB	77	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	78	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	79	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	80	#define CONFIG_MXC_USB_FLAGS 0
f9162b15 AB	81	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
	82
	83	#define CONFIG_CI_UDC
	84	#define CONFIG_USBD_HS
	85	#define CONFIG_USB_GADGET_DUALSPEED
	86	#define CONFIG_USB_GADGET
	87	#define CONFIG_USB_GADGET_DOWNLOAD
f9162b15 AB	88	#define CONFIG_USB_GADGET_MASS_STORAGE
	89	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	90	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	91	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	92	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	93	#define CONFIG_G_DNL_MANUFACTURER "Advantech"
fc44902a	94	#endif
f9162b15 AB	95
f9162b15 AB	96	/* Networking Configs */
c26ffd9b	97	#ifdef CONFIG_NET
f9162b15 AB	98	#define CONFIG_FEC_MXC
	99	#define CONFIG_MII
	100	#define IMX_FEC_BASE ENET_BASE_ADDR
	101	#define CONFIG_FEC_XCV_TYPE RGMII
	102	#define CONFIG_ETHPRIME "FEC"
	103	#define CONFIG_FEC_MXC_PHYADDR 4
	104	#define CONFIG_PHYLIB
	105	#define CONFIG_PHY_ATHEROS
c26ffd9b	106	#endif
f9162b15 AB	107
f9162b15 AB	108	/* Serial Flash */
f9162b15 AB	109	#ifdef CONFIG_CMD_SF
	110	#define CONFIG_MXC_SPI
	111	#define CONFIG_SF_DEFAULT_BUS 0
	112	#define CONFIG_SF_DEFAULT_CS 0
	113	#define CONFIG_SF_DEFAULT_SPEED 20000000
	114	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	115	#endif
	116
	117	/* allow to overwrite serial and ethaddr */
	118	#define CONFIG_ENV_OVERWRITE
	119	#define CONFIG_CONS_INDEX 1
	120	#define CONFIG_BAUDRATE 115200
	121
	122	/* Command definition */
	123	#define CONFIG_CMD_BMODE
f9162b15 AB	124
	125	#define CONFIG_LOADADDR 0x12000000
	126	#define CONFIG_SYS_TEXT_BASE 0x17800000
	127
	128	#define CONFIG_EXTRA_ENV_SETTINGS \
	129	"script=boot.scr\0" \
	130	"image=/boot/uImage\0" \
	131	"uboot=u-boot.imx\0" \
	132	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	133	"fdt_addr=0x18000000\0" \
	134	"boot_fdt=yes\0" \
	135	"ip_dyn=yes\0" \
12ca05a3	136	"console=" CONSOLE_DEV "\0" \
f9162b15 AB	137	"fdt_high=0xffffffff\0" \
	138	"initrd_high=0xffffffff\0" \
	139	"sddev=0\0" \
	140	"emmcdev=1\0" \
	141	"partnum=1\0" \
	142	"update_sd_firmware=" \
	143	"if test ${ip_dyn} = yes; then " \
	144	"setenv get_cmd dhcp; " \
	145	"else " \
	146	"setenv get_cmd tftp; " \
	147	"fi; " \
	148	"if mmc dev ${mmcdev}; then " \
	149	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	150	"setexpr fw_sz ${filesize} / 0x200; " \
	151	"setexpr fw_sz ${fw_sz} + 1; " \
	152	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	153	"fi; " \
	154	"fi\0" \
	155	"update_sf_uboot=" \
	156	"if tftp $loadaddr $uboot; then " \
	157	"sf probe; " \
	158	"sf erase 0 0xC0000; " \
	159	"sf write $loadaddr 0x400 $filesize; " \
	160	"echo 'U-Boot upgraded. Please reset'; " \
	161	"fi\0" \
	162	"setargs=setenv bootargs console=${console},${baudrate} " \
3dddc793 KL	163	"root=/dev/${rootdev} rw rootwait cma=128M " \
3dddc793 KL	164	BX50V3_BOOTARGS_EXTRA "\0" \
f9162b15 AB	165	"loadbootscript=" \
	166	"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	167	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
	168	" source\0" \
	169	"loadimage=" \
	170	"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	171	"loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	172	"tryboot=" \
	173	"if run loadbootscript; then " \
	174	"run bootscript; " \
	175	"else " \
	176	"if run loadimage; then " \
	177	"run doboot; " \
	178	"fi; " \
	179	"fi;\0" \
	180	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
	181	"run setargs; " \
	182	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	183	"if run loadfdt; then " \
	184	"bootm ${loadaddr} - ${fdt_addr}; " \
	185	"else " \
	186	"if test ${boot_fdt} = try; then " \
	187	"bootm; " \
	188	"else " \
	189	"echo WARN: Cannot load the DT; " \
	190	"fi; " \
	191	"fi; " \
	192	"else " \
	193	"bootm; " \
	194	"fi;\0" \
	195	"netargs=setenv bootargs console=${console},${baudrate} " \
	196	"root=/dev/nfs " \
	197	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	198	"netboot=echo Booting from net ...; " \
	199	"run netargs; " \
	200	"if test ${ip_dyn} = yes; then " \
	201	"setenv get_cmd dhcp; " \
	202	"else " \
	203	"setenv get_cmd tftp; " \
	204	"fi; " \
	205	"${get_cmd} ${image}; " \
	206	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	207	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	208	"bootm ${loadaddr} - ${fdt_addr}; " \
	209	"else " \
	210	"if test ${boot_fdt} = try; then " \
	211	"bootm; " \
	212	"else " \
	213	"echo WARN: Cannot load the DT; " \
	214	"fi; " \
	215	"fi; " \
	216	"else " \
	217	"bootm; " \
	218	"fi;\0" \
	219
fc44902a	220	#define CONFIG_MMCBOOTCOMMAND \
f9162b15	221	"setenv dev mmc; " \
f6825e4a	222	"setenv rootdev mmcblk0p${partnum}; " \
f9162b15 AB	223	\
	224	"setenv devnum ${sddev}; " \
	225	"if mmc dev ${devnum}; then " \
	226	"run tryboot; " \
f6825e4a	227	"setenv rootdev mmcblk1p${partnum}; " \
f9162b15 AB	228	"fi; " \
	229	\
	230	"setenv devnum ${emmcdev}; " \
	231	"if mmc dev ${devnum}; then " \
	232	"run tryboot; " \
	233	"fi; " \
fc44902a AS	234
	235	#define CONFIG_USBBOOTCOMMAND \
	236	"usb start; " \
	237	"setenv dev usb; " \
	238	"setenv devnum 0; " \
f6825e4a	239	"setenv rootdev sda${partnum}; " \
fc44902a	240	"run tryboot; " \
f9162b15	241	\
fc44902a	242	CONFIG_MMCBOOTCOMMAND \
f9162b15 AB	243	"bmode usb; " \
f9162b15 AB	244
fc44902a AS	245	#ifdef CONFIG_CMD_USB
	246	#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
	247	#else
	248	#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
	249	#endif
	250
f9162b15 AB	251	#define CONFIG_ARP_TIMEOUT 200UL
	252
	253	/* Miscellaneous configurable options */
	254	#define CONFIG_SYS_LONGHELP
f9162b15 AB	255	#define CONFIG_AUTO_COMPLETE
	256
	257	/* Print Buffer Size */
	258	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	259	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	260
	261	#define CONFIG_SYS_MEMTEST_START 0x10000000
	262	#define CONFIG_SYS_MEMTEST_END 0x10010000
	263	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	264
	265	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	266
	267	#define CONFIG_CMDLINE_EDITING
	268	#define CONFIG_STACKSIZE (128 * 1024)
	269
	270	/* Physical Memory Map */
	271	#define CONFIG_NR_DRAM_BANKS 1
	272	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	273
	274	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	275	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	276	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	277
	278	#define CONFIG_SYS_INIT_SP_OFFSET \
	279	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	280	#define CONFIG_SYS_INIT_SP_ADDR \
	281	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	282
	283	/* FLASH and environment organization */
	284	#define CONFIG_SYS_NO_FLASH
	285
	286	#define CONFIG_ENV_IS_IN_SPI_FLASH
	287	#define CONFIG_ENV_SIZE (8 * 1024)
	288	#define CONFIG_ENV_OFFSET (768 * 1024)
	289	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	290	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	291	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	292	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	293	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	294
f9162b15	295	#ifndef CONFIG_SYS_DCACHE_OFF
f9162b15 AB	296	#endif
	297
	298	#define CONFIG_SYS_FSL_USDHC_NUM 3
	299
	300	/* Framebuffer */
07aa030a	301	#ifdef CONFIG_VIDEO
f9162b15	302	#define CONFIG_VIDEO_IPUV3
f9162b15 AB	303	#define CONFIG_VIDEO_BMP_RLE8
	304	#define CONFIG_SPLASH_SCREEN
	305	#define CONFIG_SPLASH_SCREEN_ALIGN
	306	#define CONFIG_BMP_16BPP
	307	#define CONFIG_VIDEO_LOGO
	308	#define CONFIG_VIDEO_BMP_LOGO
	309	#define CONFIG_IPUV3_CLK 260000000
	310	#define CONFIG_IMX_HDMI
	311	#define CONFIG_IMX_VIDEO_SKIP
07aa030a	312	#endif
f9162b15	313
54971ac6 AB	314	#define CONFIG_PWM_IMX
	315	#define CONFIG_IMX6_PWM_PER_CLK 66000000
	316
f9162b15 AB	317	#undef CONFIG_CMD_PCI
f9162b15 AB	318	#ifdef CONFIG_CMD_PCI
f9162b15 AB	319	#define CONFIG_PCI_SCAN_SHOW
	320	#define CONFIG_PCIE_IMX
	321	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
	322	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
	323	#endif
	324
	325	/* I2C Configs */
f9162b15 AB	326	#define CONFIG_SYS_I2C
	327	#define CONFIG_SYS_I2C_MXC
	328	#define CONFIG_SYS_I2C_SPEED 100000
	329	#define CONFIG_SYS_I2C_MXC_I2C1
	330	#define CONFIG_SYS_I2C_MXC_I2C2
	331	#define CONFIG_SYS_I2C_MXC_I2C3
	332
	333	#endif /* __GE_BX50V3_CONFIG_H */