[people/ms/u-boot.git] / include / configs / ge_bx50v3.h

/*
 * Copyright (C) 2015 Timesys Corporation
 * Copyright (C) 2015 General Electric Company
 * Copyright (C) 2014 Advantech
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the GE MX6Q Bx50v3 boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __GE_BX50V3_CONFIG_H
#define __GE_BX50V3_CONFIG_H

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

#define BX50V3_BOOTARGS_EXTRA
#if defined(CONFIG_TARGET_GE_B450V3)
#define CONFIG_BOARD_NAME	"General Electric B450v3"
#define CONFIG_DEFAULT_FDT_FILE	"/boot/imx6q-b450v3.dtb"
#elif defined(CONFIG_TARGET_GE_B650V3)
#define CONFIG_BOARD_NAME	"General Electric B650v3"
#define CONFIG_DEFAULT_FDT_FILE	"/boot/imx6q-b650v3.dtb"
#elif defined(CONFIG_TARGET_GE_B850V3)
#define CONFIG_BOARD_NAME	"General Electric B850v3"
#define CONFIG_DEFAULT_FDT_FILE	"/boot/imx6q-b850v3.dtb"
#undef BX50V3_BOOTARGS_EXTRA
#define BX50V3_BOOTARGS_EXTRA	"video=DP-1:1024x768@60 " \
				"video=HDMI-A-1:1024x768@60 "
#else
#define CONFIG_BOARD_NAME	"General Electric BA16 Generic"
#define CONFIG_DEFAULT_FDT_FILE	"/boot/imx6q-ba16.dtb"
#endif

#define CONFIG_MXC_UART_BASE	UART3_BASE
#define CONSOLE_DEV	"ttymxc2"

#define CONFIG_SUPPORT_EMMC_BOOT


#include "mx6_common.h"
#include <linux/sizes.h>

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT

#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART

#define CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP

/* SATA Configs */
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_DOS_PARTITION

/* USB Configs */
#ifdef CONFIG_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_USB_GADGET_MASS_STORAGE
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_G_DNL_VENDOR_NUM   0x0525
#define CONFIG_G_DNL_PRODUCT_NUM  0xa4a5
#define CONFIG_G_DNL_MANUFACTURER "Advantech"
#endif

/* Networking Configs */
#ifdef CONFIG_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME		"FEC"
#define CONFIG_FEC_MXC_PHYADDR		4
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS
#endif

/* Serial Flash */
#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED	20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#endif

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	1
#define CONFIG_BAUDRATE	115200

/* Command definition */
#define CONFIG_CMD_BMODE

#define CONFIG_LOADADDR	0x12000000
#define CONFIG_SYS_TEXT_BASE	0x17800000

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=/boot/uImage\0" \
	"uboot=u-boot.imx\0" \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=yes\0" \
	"ip_dyn=yes\0" \
	"console=" CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"sddev=0\0" \
	"emmcdev=1\0" \
	"partnum=1\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"update_sf_uboot=" \
		"if tftp $loadaddr $uboot; then " \
			"sf probe; " \
			"sf erase 0 0xC0000; " \
			"sf write $loadaddr 0x400 $filesize; " \
			"echo 'U-Boot upgraded. Please reset'; " \
		"fi\0" \
	"setargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/${rootdev} rw rootwait cma=128M " \
		BX50V3_BOOTARGS_EXTRA "\0" \
	"loadbootscript=" \
		"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
		" source\0" \
	"loadimage=" \
		"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	"loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	"tryboot=" \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run doboot; " \
			"fi; " \
		"fi;\0" \
	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
		"run setargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \

#define CONFIG_MMCBOOTCOMMAND \
	"setenv dev mmc; " \
	"setenv rootdev mmcblk0p${partnum}; " \
	\
	"setenv devnum ${sddev}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
		"setenv rootdev mmcblk1p${partnum}; " \
	"fi; " \
	\
	"setenv devnum ${emmcdev}; " \
	"if mmc dev ${devnum}; then " \
		"run tryboot; " \
	"fi; " \

#define CONFIG_USBBOOTCOMMAND \
	"usb start; " \
	"setenv dev usb; " \
	"setenv devnum 0; " \
	"setenv rootdev sda${partnum}; " \
	"run tryboot; " \
	\
	CONFIG_MMCBOOTCOMMAND \
	"bmode usb; " \

#ifdef CONFIG_CMD_USB
#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
#else
#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
#endif

#define CONFIG_ARP_TIMEOUT     200UL

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END         0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE               (128 * 1024)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE		(8 * 1024)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED

#ifndef CONFIG_SYS_DCACHE_OFF
#endif

#define CONFIG_SYS_FSL_USDHC_NUM	3

/* Framebuffer */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#endif

#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK	66000000

#undef CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
#define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(1, 5)
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		  100000
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_MXC_I2C2
#define CONFIG_SYS_I2C_MXC_I2C3

#endif	/* __GE_BX50V3_CONFIG_H */
Commit	Line	Data
f9162b15 AB	1	/*
	2	* Copyright (C) 2015 Timesys Corporation
	3	* Copyright (C) 2015 General Electric Company
	4	* Copyright (C) 2014 Advantech
	5	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	6	*
	7	* Configuration settings for the GE MX6Q Bx50v3 boards.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __GE_BX50V3_CONFIG_H
	13	#define __GE_BX50V3_CONFIG_H
	14
	15	#include <asm/arch/imx-regs.h>
	16	#include <asm/imx-common/gpio.h>
	17
3dddc793	18	#define BX50V3_BOOTARGS_EXTRA
f9162b15 AB	19	#if defined(CONFIG_TARGET_GE_B450V3)
	20	#define CONFIG_BOARD_NAME "General Electric B450v3"
	21	#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b450v3.dtb"
	22	#elif defined(CONFIG_TARGET_GE_B650V3)
	23	#define CONFIG_BOARD_NAME "General Electric B650v3"
	24	#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b650v3.dtb"
	25	#elif defined(CONFIG_TARGET_GE_B850V3)
	26	#define CONFIG_BOARD_NAME "General Electric B850v3"
	27	#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-b850v3.dtb"
3dddc793 KL	28	#undef BX50V3_BOOTARGS_EXTRA
	29	#define BX50V3_BOOTARGS_EXTRA "video=DP-1:1024x768@60 " \
	30	"video=HDMI-A-1:1024x768@60 "
f9162b15 AB	31	#else
	32	#define CONFIG_BOARD_NAME "General Electric BA16 Generic"
	33	#define CONFIG_DEFAULT_FDT_FILE "/boot/imx6q-ba16.dtb"
	34	#endif
	35
	36	#define CONFIG_MXC_UART_BASE UART3_BASE
12ca05a3	37	#define CONSOLE_DEV "ttymxc2"
f9162b15	38
f9162b15 AB	39	#define CONFIG_SUPPORT_EMMC_BOOT
f9162b15 AB	40
f9162b15 AB	41
	42	#include "mx6_common.h"
	43	#include <linux/sizes.h>
	44
f9162b15 AB	45	#define CONFIG_CMDLINE_TAG
	46	#define CONFIG_SETUP_MEMORY_TAGS
	47	#define CONFIG_INITRD_TAG
	48	#define CONFIG_REVISION_TAG
	49	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
	50
	51	#define CONFIG_BOARD_EARLY_INIT_F
	52	#define CONFIG_BOARD_LATE_INIT
	53
	54	#define CONFIG_MXC_GPIO
	55	#define CONFIG_MXC_UART
	56
	57	#define CONFIG_CMD_FUSE
	58	#define CONFIG_MXC_OCOTP
	59
	60	/* SATA Configs */
aacc10c5	61	#ifdef CONFIG_CMD_SATA
f9162b15 AB	62	#define CONFIG_DWC_AHSATA
	63	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	64	#define CONFIG_DWC_AHSATA_PORT_ID 0
	65	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	66	#define CONFIG_LBA48
	67	#define CONFIG_LIBATA
aacc10c5	68	#endif
f9162b15 AB	69
	70	/* MMC Configs */
	71	#define CONFIG_FSL_ESDHC
	72	#define CONFIG_FSL_USDHC
	73	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	74	#define CONFIG_MMC
f9162b15 AB	75	#define CONFIG_GENERIC_MMC
f9162b15 AB	76	#define CONFIG_BOUNCE_BUFFER
f9162b15 AB	77	#define CONFIG_DOS_PARTITION
	78
	79	/* USB Configs */
fc44902a	80	#ifdef CONFIG_USB
f9162b15 AB	81	#define CONFIG_USB_EHCI
f9162b15 AB	82	#define CONFIG_USB_EHCI_MX6
f9162b15 AB	83	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	84	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	85	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	86	#define CONFIG_MXC_USB_FLAGS 0
f9162b15 AB	87	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
	88
	89	#define CONFIG_CI_UDC
	90	#define CONFIG_USBD_HS
	91	#define CONFIG_USB_GADGET_DUALSPEED
	92	#define CONFIG_USB_GADGET
	93	#define CONFIG_USB_GADGET_DOWNLOAD
f9162b15 AB	94	#define CONFIG_USB_GADGET_MASS_STORAGE
	95	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	96	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	97	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	98	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	99	#define CONFIG_G_DNL_MANUFACTURER "Advantech"
fc44902a	100	#endif
f9162b15 AB	101
f9162b15 AB	102	/* Networking Configs */
c26ffd9b	103	#ifdef CONFIG_NET
f9162b15 AB	104	#define CONFIG_FEC_MXC
	105	#define CONFIG_MII
	106	#define IMX_FEC_BASE ENET_BASE_ADDR
	107	#define CONFIG_FEC_XCV_TYPE RGMII
	108	#define CONFIG_ETHPRIME "FEC"
	109	#define CONFIG_FEC_MXC_PHYADDR 4
	110	#define CONFIG_PHYLIB
	111	#define CONFIG_PHY_ATHEROS
c26ffd9b	112	#endif
f9162b15 AB	113
f9162b15 AB	114	/* Serial Flash */
f9162b15 AB	115	#ifdef CONFIG_CMD_SF
	116	#define CONFIG_MXC_SPI
	117	#define CONFIG_SF_DEFAULT_BUS 0
	118	#define CONFIG_SF_DEFAULT_CS 0
	119	#define CONFIG_SF_DEFAULT_SPEED 20000000
	120	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	121	#endif
	122
	123	/* allow to overwrite serial and ethaddr */
	124	#define CONFIG_ENV_OVERWRITE
	125	#define CONFIG_CONS_INDEX 1
	126	#define CONFIG_BAUDRATE 115200
	127
	128	/* Command definition */
	129	#define CONFIG_CMD_BMODE
f9162b15 AB	130
	131	#define CONFIG_LOADADDR 0x12000000
	132	#define CONFIG_SYS_TEXT_BASE 0x17800000
	133
	134	#define CONFIG_EXTRA_ENV_SETTINGS \
	135	"script=boot.scr\0" \
	136	"image=/boot/uImage\0" \
	137	"uboot=u-boot.imx\0" \
	138	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	139	"fdt_addr=0x18000000\0" \
	140	"boot_fdt=yes\0" \
	141	"ip_dyn=yes\0" \
12ca05a3	142	"console=" CONSOLE_DEV "\0" \
f9162b15 AB	143	"fdt_high=0xffffffff\0" \
	144	"initrd_high=0xffffffff\0" \
	145	"sddev=0\0" \
	146	"emmcdev=1\0" \
	147	"partnum=1\0" \
	148	"update_sd_firmware=" \
	149	"if test ${ip_dyn} = yes; then " \
	150	"setenv get_cmd dhcp; " \
	151	"else " \
	152	"setenv get_cmd tftp; " \
	153	"fi; " \
	154	"if mmc dev ${mmcdev}; then " \
	155	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	156	"setexpr fw_sz ${filesize} / 0x200; " \
	157	"setexpr fw_sz ${fw_sz} + 1; " \
	158	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	159	"fi; " \
	160	"fi\0" \
	161	"update_sf_uboot=" \
	162	"if tftp $loadaddr $uboot; then " \
	163	"sf probe; " \
	164	"sf erase 0 0xC0000; " \
	165	"sf write $loadaddr 0x400 $filesize; " \
	166	"echo 'U-Boot upgraded. Please reset'; " \
	167	"fi\0" \
	168	"setargs=setenv bootargs console=${console},${baudrate} " \
3dddc793 KL	169	"root=/dev/${rootdev} rw rootwait cma=128M " \
3dddc793 KL	170	BX50V3_BOOTARGS_EXTRA "\0" \
f9162b15 AB	171	"loadbootscript=" \
	172	"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
	173	"bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
	174	" source\0" \
	175	"loadimage=" \
	176	"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
	177	"loadfdt=ext2load ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
	178	"tryboot=" \
	179	"if run loadbootscript; then " \
	180	"run bootscript; " \
	181	"else " \
	182	"if run loadimage; then " \
	183	"run doboot; " \
	184	"fi; " \
	185	"fi;\0" \
	186	"doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
	187	"run setargs; " \
	188	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	189	"if run loadfdt; then " \
	190	"bootm ${loadaddr} - ${fdt_addr}; " \
	191	"else " \
	192	"if test ${boot_fdt} = try; then " \
	193	"bootm; " \
	194	"else " \
	195	"echo WARN: Cannot load the DT; " \
	196	"fi; " \
	197	"fi; " \
	198	"else " \
	199	"bootm; " \
	200	"fi;\0" \
	201	"netargs=setenv bootargs console=${console},${baudrate} " \
	202	"root=/dev/nfs " \
	203	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	204	"netboot=echo Booting from net ...; " \
	205	"run netargs; " \
	206	"if test ${ip_dyn} = yes; then " \
	207	"setenv get_cmd dhcp; " \
	208	"else " \
	209	"setenv get_cmd tftp; " \
	210	"fi; " \
	211	"${get_cmd} ${image}; " \
	212	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	213	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	214	"bootm ${loadaddr} - ${fdt_addr}; " \
	215	"else " \
	216	"if test ${boot_fdt} = try; then " \
	217	"bootm; " \
	218	"else " \
	219	"echo WARN: Cannot load the DT; " \
	220	"fi; " \
	221	"fi; " \
	222	"else " \
	223	"bootm; " \
	224	"fi;\0" \
	225
fc44902a	226	#define CONFIG_MMCBOOTCOMMAND \
f9162b15	227	"setenv dev mmc; " \
f6825e4a	228	"setenv rootdev mmcblk0p${partnum}; " \
f9162b15 AB	229	\
	230	"setenv devnum ${sddev}; " \
	231	"if mmc dev ${devnum}; then " \
	232	"run tryboot; " \
f6825e4a	233	"setenv rootdev mmcblk1p${partnum}; " \
f9162b15 AB	234	"fi; " \
	235	\
	236	"setenv devnum ${emmcdev}; " \
	237	"if mmc dev ${devnum}; then " \
	238	"run tryboot; " \
	239	"fi; " \
fc44902a AS	240
	241	#define CONFIG_USBBOOTCOMMAND \
	242	"usb start; " \
	243	"setenv dev usb; " \
	244	"setenv devnum 0; " \
f6825e4a	245	"setenv rootdev sda${partnum}; " \
fc44902a	246	"run tryboot; " \
f9162b15	247	\
fc44902a	248	CONFIG_MMCBOOTCOMMAND \
f9162b15 AB	249	"bmode usb; " \
f9162b15 AB	250
fc44902a AS	251	#ifdef CONFIG_CMD_USB
	252	#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
	253	#else
	254	#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
	255	#endif
	256
f9162b15 AB	257	#define CONFIG_ARP_TIMEOUT 200UL
	258
	259	/* Miscellaneous configurable options */
	260	#define CONFIG_SYS_LONGHELP
f9162b15 AB	261	#define CONFIG_AUTO_COMPLETE
	262
	263	/* Print Buffer Size */
	264	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	265	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	266
	267	#define CONFIG_SYS_MEMTEST_START 0x10000000
	268	#define CONFIG_SYS_MEMTEST_END 0x10010000
	269	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	270
	271	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	272
	273	#define CONFIG_CMDLINE_EDITING
	274	#define CONFIG_STACKSIZE (128 * 1024)
	275
	276	/* Physical Memory Map */
	277	#define CONFIG_NR_DRAM_BANKS 1
	278	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	279
	280	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	281	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	282	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	283
	284	#define CONFIG_SYS_INIT_SP_OFFSET \
	285	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	286	#define CONFIG_SYS_INIT_SP_ADDR \
	287	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	288
	289	/* FLASH and environment organization */
	290	#define CONFIG_SYS_NO_FLASH
	291
	292	#define CONFIG_ENV_IS_IN_SPI_FLASH
	293	#define CONFIG_ENV_SIZE (8 * 1024)
	294	#define CONFIG_ENV_OFFSET (768 * 1024)
	295	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
	296	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	297	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	298	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	299	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	300
f9162b15	301	#ifndef CONFIG_SYS_DCACHE_OFF
f9162b15 AB	302	#endif
	303
	304	#define CONFIG_SYS_FSL_USDHC_NUM 3
	305
	306	/* Framebuffer */
07aa030a	307	#ifdef CONFIG_VIDEO
f9162b15	308	#define CONFIG_VIDEO_IPUV3
f9162b15 AB	309	#define CONFIG_VIDEO_BMP_RLE8
	310	#define CONFIG_SPLASH_SCREEN
	311	#define CONFIG_SPLASH_SCREEN_ALIGN
	312	#define CONFIG_BMP_16BPP
	313	#define CONFIG_VIDEO_LOGO
	314	#define CONFIG_VIDEO_BMP_LOGO
	315	#define CONFIG_IPUV3_CLK 260000000
	316	#define CONFIG_IMX_HDMI
	317	#define CONFIG_IMX_VIDEO_SKIP
07aa030a	318	#endif
f9162b15	319
54971ac6 AB	320	#define CONFIG_PWM_IMX
	321	#define CONFIG_IMX6_PWM_PER_CLK 66000000
	322
f9162b15 AB	323	#undef CONFIG_CMD_PCI
f9162b15 AB	324	#ifdef CONFIG_CMD_PCI
f9162b15 AB	325	#define CONFIG_PCI_PNP
	326	#define CONFIG_PCI_SCAN_SHOW
	327	#define CONFIG_PCIE_IMX
	328	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
	329	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
	330	#endif
	331
	332	/* I2C Configs */
f9162b15 AB	333	#define CONFIG_SYS_I2C
	334	#define CONFIG_SYS_I2C_MXC
	335	#define CONFIG_SYS_I2C_SPEED 100000
	336	#define CONFIG_SYS_I2C_MXC_I2C1
	337	#define CONFIG_SYS_I2C_MXC_I2C2
	338	#define CONFIG_SYS_I2C_MXC_I2C3
	339
	340	#endif /* __GE_BX50V3_CONFIG_H */