[people/ms/u-boot.git] / include / configs / goflexhome.h

/*
 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
 *
 * Based on dockstar.h originally written by
 * Copyright (C) 2010  Eric C. Cooper <ecc@cmu.edu>
 *
 * Based on sheevaplug.h originally written by
 * Prafulla Wadaskar <prafulla@marvell.com>
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_GOFLEXHOME_H
#define _CONFIG_GOFLEXHOME_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
#define CONFIG_KW88F6281	1	/* SOC Name */
#define CONFIG_MACH_GOFLEXHOME		/* Machine type */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/*
 * Default GPIO configuration and LED status
 */
#define GOFLEXHOME_OE_LOW               (~(0))
#define GOFLEXHOME_OE_HIGH              (~(0))
#define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
#define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */

/* PHY related */
#define MV88E1116_LED_FCTRL_REG         10
#define MV88E1116_CPRSP_CR3_REG         21
#define MV88E1116_MAC_CTRL_REG          21
#define MV88E1116_PGADR_REG             22
#define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)

/*
 * Commands configuration
 */

#define CONFIG_CMD_ENV
#define CONFIG_CMD_NAND
#define CONFIG_CMD_IDE
#define CONFIG_SYS_MVFS         /* Picks up Filesystem from mv-common.h */

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/*
 *  Environment variables configurations
 */
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND		1
#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
#else
#define CONFIG_ENV_IS_NOWHERE		1	/* if env in SDRAM */
#endif
/*
 * max 4k env size is enough, but in case of nand
 * it has to be rounded to sector size
 */
#define CONFIG_ENV_SIZE			0x20000	/* 128k */
#define CONFIG_ENV_ADDR			0xC0000
#define CONFIG_ENV_OFFSET		0xC0000	/* env starts here */

/*
 * Default environment variables
 */
#define CONFIG_BOOTCOMMAND \
	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
	"ubi part root; " \
	"ubifsmount ubi:root; " \
	"ubifsload 0x800000 ${kernel}; " \
	"bootm 0x800000"

#define CONFIG_MTDPARTS \
	"mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"console=console=ttyS0,115200\0" \
	"mtdids=nand0=orion_nand\0" \
	"mtdparts="CONFIG_MTDPARTS \
	"kernel=/boot/uImage\0" \
	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
#define CONFIG_PHY_BASE_ADR	0
#endif /* CONFIG_CMD_NET */

/*
 *  * SATA Driver configuration
 *   */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
#endif /*CONFIG_MVSATA_IDE*/

/*
 *  * RTC driver configuration
 *   */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif /* CONFIG_CMD_DATE */

#endif /* _CONFIG_GOFLEXHOME_H */
Commit	Line	Data
0ad6c34c SR	1	/*
	2	* Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
	3	*
	4	* Based on dockstar.h originally written by
	5	* Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
	6	*
	7	* Based on sheevaplug.h originally written by
	8	* Prafulla Wadaskar <prafulla@marvell.com>
	9	* (C) Copyright 2009
	10	* Marvell Semiconductor <www.marvell.com>
	11	*
1a459660	12	* SPDX-License-Identifier: GPL-2.0+
0ad6c34c SR	13	*/
	14
	15	#ifndef _CONFIG_GOFLEXHOME_H
	16	#define _CONFIG_GOFLEXHOME_H
	17
0ad6c34c SR	18	/*
	19	* High Level Configuration Options (easy to change)
	20	*/
	21	#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
0ad6c34c SR	22	#define CONFIG_KW88F6281 1 /* SOC Name */
	23	#define CONFIG_MACH_GOFLEXHOME /* Machine type */
	24	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	25
	26	/*
	27	* Default GPIO configuration and LED status
	28	*/
	29	#define GOFLEXHOME_OE_LOW (~(0))
	30	#define GOFLEXHOME_OE_HIGH (~(0))
	31	#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
	32	#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
	33
	34	/* PHY related */
	35	#define MV88E1116_LED_FCTRL_REG 10
	36	#define MV88E1116_CPRSP_CR3_REG 21
	37	#define MV88E1116_MAC_CTRL_REG 21
	38	#define MV88E1116_PGADR_REG 22
	39	#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
	40	#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
	41
	42	/*
	43	* Commands configuration
	44	*/
0ad6c34c	45
0ad6c34c	46	#define CONFIG_CMD_ENV
0ad6c34c	47	#define CONFIG_CMD_NAND
0ad6c34c	48	#define CONFIG_CMD_IDE
0ad6c34c SR	49	#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
	50
	51	/*
	52	* mv-common.h should be defined after CMD configs since it used them
	53	* to enable certain macros
	54	*/
	55	#include "mv-common.h"
	56
0ad6c34c SR	57	/*
	58	* Environment variables configurations
	59	*/
	60	#ifdef CONFIG_CMD_NAND
	61	#define CONFIG_ENV_IS_IN_NAND 1
	62	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
	63	#else
	64	#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
	65	#endif
	66	/*
	67	* max 4k env size is enough, but in case of nand
	68	* it has to be rounded to sector size
	69	*/
	70	#define CONFIG_ENV_SIZE 0x20000 /* 128k */
	71	#define CONFIG_ENV_ADDR 0xC0000
	72	#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */
	73
	74	/*
	75	* Default environment variables
	76	*/
	77	#define CONFIG_BOOTCOMMAND \
	78	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
	79	"ubi part root; " \
	80	"ubifsmount ubi:root; " \
	81	"ubifsload 0x800000 ${kernel}; " \
	82	"bootm 0x800000"
	83
	84	#define CONFIG_MTDPARTS \
	85	"mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
	86
	87	#define CONFIG_EXTRA_ENV_SETTINGS \
	88	"console=console=ttyS0,115200\0" \
	89	"mtdids=nand0=orion_nand\0" \
	90	"mtdparts="CONFIG_MTDPARTS \
	91	"kernel=/boot/uImage\0" \
	92	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
	93
	94	/*
	95	* Ethernet Driver configuration
	96	*/
	97	#ifdef CONFIG_CMD_NET
	98	#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
	99	#define CONFIG_PHY_BASE_ADR 0
	100	#endif /* CONFIG_CMD_NET */
	101
	102	/*
	103	* * SATA Driver configuration
	104	* */
	105	#ifdef CONFIG_MVSATA_IDE
	106	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
	107	#endif /CONFIG_MVSATA_IDE/
	108
	109	/*
	110	* * RTC driver configuration
	111	* */
	112	#ifdef CONFIG_CMD_DATE
	113	#define CONFIG_RTC_MV
	114	#endif /* CONFIG_CMD_DATE */
	115
	116	#endif /* _CONFIG_GOFLEXHOME_H */