]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/gplugd.h
Kconfig: Move config IDENT_STRING to Kconfig
[people/ms/u-boot.git] / include / configs / gplugd.h
CommitLineData
26749582
AB
1/*
2 * (C) Copyright 2011
3 * eInfochips Ltd. <www.einfochips.com>
4 * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
5 *
6 * Based on Aspenite:
7 * (C) Copyright 2010
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * Contributor: Mahavir Jain <mjain@marvell.com>
11 *
1a459660 12 * SPDX-License-Identifier: GPL-2.0+
26749582
AB
13 */
14
15#ifndef __CONFIG_GPLUGD_H
16#define __CONFIG_GPLUGD_H
17
e0c8fa8f
AB
18/*
19 * FIXME: fix for error caused due to recent update to mach-types.h
20 */
21#include <asm/mach-types.h>
22#ifdef MACH_TYPE_SHEEVAD
23#error "MACH_TYPE_SHEEVAD has been defined properly, please remove this."
24#else
25#define MACH_TYPE_SHEEVAD 2625
26#endif
27
26749582
AB
28/*
29 * High Level Configuration Options
30 */
31#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
32#define CONFIG_ARMADA100 1 /* SOC Family Name */
33#define CONFIG_ARMADA168 1 /* SOC Used on this Board */
e0c8fa8f 34#define CONFIG_MACH_TYPE MACH_TYPE_SHEEVAD /* Machine type */
26749582
AB
35#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
36
37#define CONFIG_SYS_TEXT_BASE 0x00f00000
38
39/*
40 * There is no internal RAM in ARMADA100, using DRAM
41 * TBD: dcache to be used for this
42 */
43#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
44#define CONFIG_NR_DRAM_BANKS_MAX 2
45
46/*
47 * Commands configuration
48 */
49#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
aa0ecfeb
AB
50
51/* Disable DCACHE */
52#define CONFIG_SYS_DCACHE_OFF
53
54/* Network configuration */
55#ifdef CONFIG_CMD_NET
aa0ecfeb
AB
56#define CONFIG_ARMADA100_FEC
57
58/* DHCP Support */
aa0ecfeb
AB
59#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
60#endif /* CONFIG_CMD_NET */
26749582 61
47e75d72
AB
62/* GPIO Support */
63#define CONFIG_MARVELL_GPIO
64
65/* PHY configuration */
66#define CONFIG_MII
47e75d72
AB
67#define CONFIG_RESET_PHY_R
68/* 88E3015 register definition */
69#define PHY_LED_PAR_SEL_REG 22
70#define PHY_LED_MAN_REG 25
71#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
72/* GPIO Configuration for PHY */
73#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
74
daa4b2f7
AB
75/* SPI Support */
76#define CONFIG_ARMADA100_SPI
77#define CONFIG_ENV_SPI_CS 110
78#define CONFIG_SYS_SSP_PORT 2
79
2f83cd57 80/* Flash Support */
2f83cd57 81
26749582
AB
82/*
83 * mv-common.h should be defined after CMD configs since it used them
84 * to enable certain macros
85 */
86#include "mv-common.h"
87#undef CONFIG_ARCH_MISC_INIT
88
89#ifdef CONFIG_SYS_NS16550_COM1
90#undef CONFIG_SYS_NS16550_COM1
91#endif /* CONFIG_SYS_NS16550_COM1 */
92
93#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
94
95/*
96 * Environment variables configurations
97 */
b5de038f
AB
98#define CONFIG_ENV_IS_IN_SPI_FLASH
99#define CONFIG_ENV_SECT_SIZE 0x4000
100#define CONFIG_ENV_SIZE 0x4000
101#define CONFIG_ENV_OFFSET 0x07C000
102
099cb1ee
AB
103#ifdef CONFIG_CMD_USB
104#define CONFIG_USB_EHCI
105#define CONFIG_USB_EHCI_ARMADA100
106#define CONFIG_EHCI_IS_TDI
099cb1ee
AB
107#endif /* CONFIG_CMD_USB */
108
109#define CONFIG_DOS_PARTITION
110#define CONFIG_ISO_PARTITION
111#define CONFIG_SUPPORT_VFAT
112
26749582 113#endif /* __CONFIG_GPLUGD_H */