[people/ms/u-boot.git] / include / configs / grsim.h

/* Configuration header file for LEON3 GRSIM, trying to be similar
 * to Gaisler's GR-XC3S-1500 board.
 *
 * (C) Copyright 2003-2005
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * (C) Copyright 2007
 * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H__
#define __CONFIG_H__

/*
 * High Level Configuration Options
 * (easy to change)
 *
 * Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
 *
 * TSIM command:
 * $ tsim-leon3 -sdram 32768 -ram 4096 -rom 2048 -mmu -cas
 *
 * In the evaluation version of TSIM, the -sdram/-ram/-rom arguments are
 * hard-coded to these values and need not be specified. (see below)
 *
 * Get TSIM from http://www.gaisler.com/index.php/downloads/simulators
 */

#define CONFIG_GRSIM		0	/* ... not running on GRSIM */
#define CONFIG_TSIM		1	/* ... running on TSIM */

/* CPU / AMBA BUS configuration */
#define CONFIG_SYS_CLK_FREQ	40000000	/* 40MHz */

/*
 * Serial console configuration
 */
#define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }

/* Partitions */
#define CONFIG_DOS_PARTITION
#define CONFIG_MAC_PARTITION
#define CONFIG_ISO_PARTITION

/*
 * Supported commands
 */
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_FPGA_LOADMK
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_REGINFO

/*
 * Autobooting
 */

#define CONFIG_PREBOOT	"echo;"	\
	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	"echo"

#undef	CONFIG_BOOTARGS

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"flash_nfs=run nfsargs addip;"					\
		"bootm ${kernel_addr}\0"				\
	"flash_self=run ramargs addip;"					\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0"	\
	"rootpath=/export/roofs\0"					\
	"scratch=40000000\0"					\
	"getkernel=tftpboot $(scratch) $(bootfile)\0" \
	"bootargs=console=ttyS0,38400" \
	""
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_SERVERIP 192.168.0.81
#define CONFIG_IPADDR 192.168.0.80
#define CONFIG_ROOTPATH "/export/rootfs"
#define CONFIG_HOSTNAME  grxc3s1500
#define CONFIG_BOOTFILE "/uImage"

#define CONFIG_BOOTCOMMAND	"run flash_self"

/* Memory MAP
 *
 *  Flash:
 *  |--------------------------------|
 *  | 0x00000000 Text & Data & BSS   | *
 *  |            for Monitor         | *
 *  | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
 *  | UNUSED / Growth                | * 256kb
 *  |--------------------------------|
 *  | 0x00050000 Base custom area    | *
 *  |            kernel / FS         | *
 *  |                                | * Rest of Flash
 *  |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
 *  | END-0x00008000 Environment     | * 32kb
 *  |--------------------------------|
 *
 *
 *
 *  Main Memory:
 *  |--------------------------------|
 *  | UNUSED / scratch area          |
 *  |                                |
 *  |                                |
 *  |                                |
 *  |                                |
 *  |--------------------------------|
 *  | Monitor .Text / .DATA / .BSS   | * 256kb
 *  | Relocated!                     | *
 *  |--------------------------------|
 *  | Monitor Malloc                 | * 128kb (contains relocated environment)
 *  |--------------------------------|
 *  | Monitor/kernel STACK           | * 64kb
 *  |--------------------------------|
 *  | Page Table for MMU systems     | * 2k
 *  |--------------------------------|
 *  | PROM Code accessed from Linux  | * 6kb-128b
 *  |--------------------------------|
 *  | Global data (avail from kernel)| * 128b
 *  |--------------------------------|
 *
 */

/*
 * Flash configuration (8,16 or 32 MB)
 * TEXT base always at 0xFFF00000
 * ENV_ADDR always at  0xFFF40000
 * FLASH_BASE at 0xFC000000 for 64 MB
 *               0xFE000000 for 32 MB
 *               0xFF000000 for 16 MB
 *               0xFF800000 for  8 MB
 */
#define CONFIG_SYS_NO_FLASH		1
#define CONFIG_SYS_FLASH_BASE		0x00000000
#define CONFIG_SYS_FLASH_SIZE		0x00800000
#define CONFIG_ENV_SIZE		0x8000

#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SIZE)

#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 128 KB sectors */
#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */

#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */

#ifdef ENABLE_FLASH_SUPPORT
/* For use with grsim FLASH emulation extension */
#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */

#undef CONFIG_FLASH_8BIT	/* Flash is 32-bit */

/*** CFI CONFIG ***/
#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#endif

/*
 * Environment settings
 */
#define CONFIG_ENV_IS_NOWHERE 1
/*#define CONFIG_ENV_IS_IN_FLASH*/
/*#define CONFIG_ENV_SIZE		0x8000*/
#define CONFIG_ENV_SECT_SIZE	0x40000
#define CONFIG_ENV_OVERWRITE	1

/*
 * Memory map
 */
#define CONFIG_SYS_SDRAM_BASE		0x60000000
#define CONFIG_SYS_SDRAM_SIZE		0x02000000 /* 32MiB SDRAM */
#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE)

#define CONFIG_SYS_SRAM_BASE		0x40000000
#define CONFIG_SYS_SRAM_SIZE		0x00400000 /* 4MiB SRAM */
#define CONFIG_SYS_SRAM_END		(CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE)

/* Always Run U-Boot from SDRAM */
#define CONFIG_SYS_RAM_BASE		CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_RAM_SIZE		CONFIG_SYS_SDRAM_SIZE
#define CONFIG_SYS_RAM_END		CONFIG_SYS_SDRAM_END

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)

#define CONFIG_SYS_PROM_SIZE		(8192-GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)

#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
#define CONFIG_SYS_STACK_SIZE		(0x10000-32)

#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#   define CONFIG_SYS_RAMBOOT		1
#endif

#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)

/* relocated monitor area */
#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)

/* make un relocated address from relocated address */
#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))

#ifdef CONFIG_CMD_NET
/*
 * Ethernet configuration
 */
#define CONFIG_GRETH	1

/*
 * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
 */
/* #define CONFIG_GRETH_10MBIT 1 */
#define CONFIG_PHY_ADDR		0x00

#endif /* CONFIG_CMD_NET */

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
#else
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */

#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */

#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */

/***** Gaisler GRLIB IP-Cores Config ********/

#define CONFIG_SYS_GRLIB_SDRAM     0

#define CONFIG_SYS_GRLIB_MEMCFG1   (0x000000ff | (1<<11))

/* No SDRAM Configuration */
#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1

/* LEON2 MCTRL configuration */
#define CONFIG_SYS_GRLIB_ESA_MCTRL1
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1   (0x000000ff | (1<<11))
#if CONFIG_GRSIM
/* GRSIM configuration */
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82206000
#else
/* TSIM configuration */
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x81805220
#endif
#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3   0x00136000

/* GRLIB FT-MCTRL configuration */
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1   (0x000000ff | (1<<11))
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82206000
#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3   0x00136000

/* no DDR controller */
#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1

/* no DDR2 Controller */
#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1

/* default kernel command line */
#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"

/* TSIM command:
 * $ ./tsim-leon3 -mmu -cas
 *
 *  This TSIM evaluation version will expire 2015-04-02
 *
 *
 *  TSIM/LEON3 SPARC simulator, version 2.0.35 (evaluation version)
 *
 *  Copyright (C) 2014, Aeroflex Gaisler - all rights reserved.
 *  This software may only be used with a valid license.
 *  For latest updates, go to http://www.gaisler.com/
 *  Comments or bug-reports to support@gaisler.com
 *
 * serial port A on stdin/stdout
 * allocated 4096 K SRAM memory, in 1 bank
 * allocated 32 M SDRAM memory, in 1 bank
 * allocated 2048 K ROM memory
 * icache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
 * dcache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
 * tsim> leon
 * 0x80000000   Memory configuration register 1   0x000002ff
 * 0x80000004   Memory configuration register 2   0x81805220
 * 0x80000008   Memory configuration register 3   0x00000000
 */

#endif				/* __CONFIG_H */
Commit	Line	Data
823edd8a DH	1	/* Configuration header file for LEON3 GRSIM, trying to be similar
	2	* to Gaisler's GR-XC3S-1500 board.
	3	*
	4	* (C) Copyright 2003-2005
	5	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	6	*
	7	* (C) Copyright 2007
	8	* Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
	9	*
3765b3e7	10	* SPDX-License-Identifier: GPL-2.0+
823edd8a DH	11	*/
	12
	13	#ifndef __CONFIG_H__
	14	#define __CONFIG_H__
	15
	16	/*
	17	* High Level Configuration Options
	18	* (easy to change)
	19	*
	20	* Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
	21	*
b6b280ce FR	22	* TSIM command:
b6b280ce FR	23	* $ tsim-leon3 -sdram 32768 -ram 4096 -rom 2048 -mmu -cas
823edd8a	24	*
b6b280ce FR	25	* In the evaluation version of TSIM, the -sdram/-ram/-rom arguments are
	26	* hard-coded to these values and need not be specified. (see below)
	27	*
	28	* Get TSIM from http://www.gaisler.com/index.php/downloads/simulators
823edd8a DH	29	*/
823edd8a DH	30
823edd8a DH	31	#define CONFIG_GRSIM 0 /* ... not running on GRSIM */
	32	#define CONFIG_TSIM 1 /* ... running on TSIM */
	33
	34	/* CPU / AMBA BUS configuration */
53677ef1	35	#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
823edd8a	36
823edd8a DH	37	/*
	38	* Serial console configuration
	39	*/
	40	#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
6d0f6bcf	41	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
823edd8a DH	42
	43	/* Partitions */
	44	#define CONFIG_DOS_PARTITION
	45	#define CONFIG_MAC_PARTITION
	46	#define CONFIG_ISO_PARTITION
	47
	48	/*
	49	* Supported commands
	50	*/
823edd8a	51	#define CONFIG_CMD_DIAG
64e809af	52	#define CONFIG_CMD_FPGA_LOADMK
823edd8a	53	#define CONFIG_CMD_IRQ
823edd8a	54	#define CONFIG_CMD_REGINFO
823edd8a DH	55
	56	/*
	57	* Autobooting
	58	*/
823edd8a DH	59
	60	#define CONFIG_PREBOOT "echo;" \
	61	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
	62	"echo"
	63
	64	#undef CONFIG_BOOTARGS
823edd8a DH	65
	66	#define CONFIG_EXTRA_ENV_SETTINGS \
	67	"netdev=eth0\0" \
	68	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	69	"nfsroot=${serverip}:${rootpath}\0" \
	70	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	71	"addip=setenv bootargs ${bootargs} " \
	72	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	73	":${hostname}:${netdev}:off panic=1\0" \
	74	"flash_nfs=run nfsargs addip;" \
	75	"bootm ${kernel_addr}\0" \
	76	"flash_self=run ramargs addip;" \
	77	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	78	"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
	79	"rootpath=/export/roofs\0" \
	80	"scratch=40000000\0" \
3a2b9f28	81	"getkernel=tftpboot $(scratch) $(bootfile)\0" \
823edd8a DH	82	"bootargs=console=ttyS0,38400" \
	83	""
	84	#define CONFIG_NETMASK 255.255.255.0
	85	#define CONFIG_GATEWAYIP 192.168.0.1
	86	#define CONFIG_SERVERIP 192.168.0.81
	87	#define CONFIG_IPADDR 192.168.0.80
8b3637c6	88	#define CONFIG_ROOTPATH "/export/rootfs"
823edd8a	89	#define CONFIG_HOSTNAME grxc3s1500
b3f44c21	90	#define CONFIG_BOOTFILE "/uImage"
823edd8a DH	91
	92	#define CONFIG_BOOTCOMMAND "run flash_self"
	93
	94	/* Memory MAP
	95	*
	96	* Flash:
	97	* \|--------------------------------\|
	98	* \| 0x00000000 Text & Data & BSS \| *
	99	* \| for Monitor \| *
	100	* \| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\| *
	101	* \| UNUSED / Growth \| * 256kb
	102	* \|--------------------------------\|
	103	* \| 0x00050000 Base custom area \| *
	104	* \| kernel / FS \| *
	105	* \| \| * Rest of Flash
	106	* \|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\|
	107	* \| END-0x00008000 Environment \| * 32kb
	108	* \|--------------------------------\|
	109	*
	110	*
	111	*
	112	* Main Memory:
	113	* \|--------------------------------\|
	114	* \| UNUSED / scratch area \|
	115	* \| \|
	116	* \| \|
	117	* \| \|
	118	* \| \|
	119	* \|--------------------------------\|
	120	* \| Monitor .Text / .DATA / .BSS \| * 256kb
	121	* \| Relocated! \| *
	122	* \|--------------------------------\|
	123	* \| Monitor Malloc \| * 128kb (contains relocated environment)
	124	* \|--------------------------------\|
	125	* \| Monitor/kernel STACK \| * 64kb
	126	* \|--------------------------------\|
	127	* \| Page Table for MMU systems \| * 2k
	128	* \|--------------------------------\|
	129	* \| PROM Code accessed from Linux \| * 6kb-128b
	130	* \|--------------------------------\|
	131	* \| Global data (avail from kernel)\| * 128b
	132	* \|--------------------------------\|
	133	*
	134	*/
	135
	136	/*
	137	* Flash configuration (8,16 or 32 MB)
	138	* TEXT base always at 0xFFF00000
	139	* ENV_ADDR always at 0xFFF40000
	140	* FLASH_BASE at 0xFC000000 for 64 MB
	141	* 0xFE000000 for 32 MB
	142	* 0xFF000000 for 16 MB
	143	* 0xFF800000 for 8 MB
	144	*/
6d0f6bcf JCPV	145	#define CONFIG_SYS_NO_FLASH 1
	146	#define CONFIG_SYS_FLASH_BASE 0x00000000
	147	#define CONFIG_SYS_FLASH_SIZE 0x00800000
0e8d1586	148	#define CONFIG_ENV_SIZE 0x8000
823edd8a	149
6d0f6bcf	150	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SIZE)
823edd8a DH	151
823edd8a DH	152	#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors */
6d0f6bcf JCPV	153	#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max num of sects on one chip */
6d0f6bcf JCPV	154	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
823edd8a	155
6d0f6bcf JCPV	156	#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
	157	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
	158	#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
	159	#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
823edd8a DH	160
	161	#ifdef ENABLE_FLASH_SUPPORT
	162	/* For use with grsim FLASH emulation extension */
6d0f6bcf	163	#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
823edd8a DH	164
	165	#undef CONFIG_FLASH_8BIT /* Flash is 32-bit */
	166
	167	/* CFI CONFIG */
6d0f6bcf	168	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
00b1883a	169	#define CONFIG_FLASH_CFI_DRIVER
6d0f6bcf	170	#define CONFIG_SYS_FLASH_CFI
823edd8a DH	171	#endif
	172
	173	/*
	174	* Environment settings
	175	*/
93f6d725	176	#define CONFIG_ENV_IS_NOWHERE 1
5a1aceb0	177	/#define CONFIG_ENV_IS_IN_FLASH/
0e8d1586 JCPV	178	/#define CONFIG_ENV_SIZE 0x8000/
0e8d1586 JCPV	179	#define CONFIG_ENV_SECT_SIZE 0x40000
823edd8a DH	180	#define CONFIG_ENV_OVERWRITE 1
	181
	182	/*
	183	* Memory map
	184	*/
b6b280ce FR	185	#define CONFIG_SYS_SDRAM_BASE 0x60000000
	186	#define CONFIG_SYS_SDRAM_SIZE 0x02000000 /* 32MiB SDRAM */
	187	#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE)
823edd8a	188
b6b280ce FR	189	#define CONFIG_SYS_SRAM_BASE 0x40000000
	190	#define CONFIG_SYS_SRAM_SIZE 0x00400000 /* 4MiB SRAM */
	191	#define CONFIG_SYS_SRAM_END (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE)
823edd8a DH	192
823edd8a DH	193	/* Always Run U-Boot from SDRAM */
b6b280ce FR	194	#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
	195	#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
	196	#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
823edd8a	197
25ddd1fb	198	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
823edd8a	199
25ddd1fb	200	#define CONFIG_SYS_PROM_SIZE (8192-GENERATED_GBL_DATA_SIZE)
6d0f6bcf	201	#define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
823edd8a	202
6d0f6bcf JCPV	203	#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
6d0f6bcf JCPV	204	#define CONFIG_SYS_STACK_SIZE (0x10000-32)
823edd8a	205
14d0a02a	206	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
6d0f6bcf JCPV	207	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
6d0f6bcf JCPV	208	# define CONFIG_SYS_RAMBOOT 1
823edd8a DH	209	#endif
823edd8a DH	210
6d0f6bcf JCPV	211	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	212	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	213	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
823edd8a	214
6d0f6bcf JCPV	215	#define CONFIG_SYS_MALLOC_END (CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
6d0f6bcf JCPV	216	#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
823edd8a DH	217
823edd8a DH	218	/* relocated monitor area */
6d0f6bcf JCPV	219	#define CONFIG_SYS_RELOC_MONITOR_MAX_END CONFIG_SYS_MALLOC_BASE
6d0f6bcf JCPV	220	#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
823edd8a DH	221
823edd8a DH	222	/* make un relocated address from relocated address */
14d0a02a	223	#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
823edd8a	224
b6b280ce	225	#ifdef CONFIG_CMD_NET
823edd8a DH	226	/*
	227	* Ethernet configuration
	228	*/
	229	#define CONFIG_GRETH 1
823edd8a	230
823edd8a DH	231	/*
	232	* Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
	233	*/
	234	/* #define CONFIG_GRETH_10MBIT 1 */
	235	#define CONFIG_PHY_ADDR 0x00
	236
b6b280ce FR	237	#endif /* CONFIG_CMD_NET */
b6b280ce FR	238
823edd8a DH	239	/*
	240	* Miscellaneous configurable options
	241	*/
6d0f6bcf	242	#define CONFIG_SYS_LONGHELP /* undef to save memory */
823edd8a	243	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	244	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
823edd8a	245	#else
6d0f6bcf	246	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
823edd8a	247	#endif
6d0f6bcf JCPV	248	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	249	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	250	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
823edd8a	251
6d0f6bcf JCPV	252	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
6d0f6bcf JCPV	253	#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
823edd8a	254
6d0f6bcf	255	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
823edd8a	256
823edd8a DH	257	/*** Gaisler GRLIB IP-Cores Config ******/
823edd8a DH	258
6d0f6bcf	259	#define CONFIG_SYS_GRLIB_SDRAM 0
b6b280ce	260
6d0f6bcf	261	#define CONFIG_SYS_GRLIB_MEMCFG1 (0x000000ff \| (1<<11))
cff009ed DH	262
	263	/* No SDRAM Configuration */
	264	#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
	265
	266	/* LEON2 MCTRL configuration */
	267	#define CONFIG_SYS_GRLIB_ESA_MCTRL1
	268	#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x000000ff \| (1<<11))
823edd8a DH	269	#if CONFIG_GRSIM
823edd8a DH	270	/* GRSIM configuration */
cff009ed	271	#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000
823edd8a DH	272	#else
823edd8a DH	273	/* TSIM configuration */
cff009ed	274	#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x81805220
823edd8a	275	#endif
cff009ed	276	#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00136000
823edd8a	277
cff009ed DH	278	/* GRLIB FT-MCTRL configuration */
	279	#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
	280	#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x000000ff \| (1<<11))
	281	#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000
	282	#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00136000
823edd8a DH	283
823edd8a DH	284	/* no DDR controller */
cff009ed	285	#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
823edd8a DH	286
823edd8a DH	287	/* no DDR2 Controller */
cff009ed	288	#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
823edd8a	289
823edd8a DH	290	/* default kernel command line */
	291	#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
	292
b6b280ce FR	293	/* TSIM command:
	294	* $ ./tsim-leon3 -mmu -cas
	295	*
	296	* This TSIM evaluation version will expire 2015-04-02
	297	*
	298	*
	299	* TSIM/LEON3 SPARC simulator, version 2.0.35 (evaluation version)
	300	*
	301	* Copyright (C) 2014, Aeroflex Gaisler - all rights reserved.
	302	* This software may only be used with a valid license.
	303	* For latest updates, go to http://www.gaisler.com/
	304	* Comments or bug-reports to support@gaisler.com
	305	*
	306	* serial port A on stdin/stdout
	307	* allocated 4096 K SRAM memory, in 1 bank
	308	* allocated 32 M SDRAM memory, in 1 bank
	309	* allocated 2048 K ROM memory
	310	* icache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
	311	* dcache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
	312	* tsim> leon
	313	* 0x80000000 Memory configuration register 1 0x000002ff
	314	* 0x80000004 Memory configuration register 2 0x81805220
	315	* 0x80000008 Memory configuration register 3 0x00000000
	316	*/
	317
823edd8a	318	#endif /* __CONFIG_H */