[people/ms/u-boot.git] / include / configs / gw_ventana.h

/*
 * Copyright (C) 2013 Gateworks Corporation
 *
 * SPDX-License-Identifier: GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* SPL */
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
/*
#define CONFIG_SPL_SATA_SUPPORT
*/
/* Location in NAND to read U-Boot from */
#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)

#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
#include "mx6_common.h"
#define CONFIG_MX6
#define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
#define CONFIG_DISPLAY_BOARDINFO_LATE  /* display board info (after reloc) */

#define CONFIG_MACH_TYPE	4520   /* Gateworks Ventana Platform */

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

/* ATAGs */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_SERIAL_TAG
#define CONFIG_REVISION_TAG

#define CONFIG_SYS_GENERIC_BOARD

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

/* Init Functions */
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R

/* GPIO */
#define CONFIG_MXC_GPIO

/* Serial */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

#ifdef CONFIG_SPI_FLASH

/* SPI */
#define CONFIG_CMD_SF
#ifdef CONFIG_CMD_SF
  #define CONFIG_MXC_SPI
  #define CONFIG_SPI_FLASH_MTD
  #define CONFIG_SPI_FLASH_BAR
  #define CONFIG_SPI_FLASH_WINBOND
  #define CONFIG_SF_DEFAULT_BUS              0
  #define CONFIG_SF_DEFAULT_CS               0
					     /* GPIO 3-19 (21248) */
  #define CONFIG_SF_DEFAULT_SPEED            30000000
  #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
#endif

#else
/* Enable NAND support */
#define CONFIG_CMD_TIME
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#ifdef CONFIG_CMD_NAND
  #define CONFIG_NAND_MXS
  #define CONFIG_SYS_MAX_NAND_DEVICE	1
  #define CONFIG_SYS_NAND_BASE		0x40000000
  #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  #define CONFIG_SYS_NAND_ONFI_DETECTION

  /* DMA stuff, needed for GPMI/MXS NAND support */
  #define CONFIG_APBH_DMA
  #define CONFIG_APBH_DMA_BURST
  #define CONFIG_APBH_DMA_BURST8
#endif

#endif /* CONFIG_SPI_FLASH */

/* Flattened Image Tree Suport */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_I2C_GSC			0
#define CONFIG_I2C_PMIC			1

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_SYS_FSL_USDHC_NUM       1
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER

/* Filesystem support */
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_UBIFS
#define CONFIG_DOS_PARTITION

/*
 * SATA Configs
 */
#define CONFIG_CMD_SATA
#ifdef CONFIG_CMD_SATA
  #define CONFIG_DWC_AHSATA
  #define CONFIG_SYS_SATA_MAX_DEVICE	1
  #define CONFIG_DWC_AHSATA_PORT_ID	0
  #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
  #define CONFIG_LBA48
  #define CONFIG_LIBATA
#endif

/*
 * PCI express
 */
#define CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCI_FIXUP_DEV
#define CONFIG_PCIE_IMX
#endif

/*
 * PMIC
 */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
#define CONFIG_POWER_LTC3676
#define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c

/* Various command support */
#include <config_cmd_default.h>
#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
#define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_GSC
#define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
#define CONFIG_CMD_UBI
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_FUSE          /* eFUSE read/write support */
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif


/* Ethernet support */
#define CONFIG_FEC_MXC
#define CONFIG_E1000
#define CONFIG_MII
#define IMX_FEC_BASE             ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE      RGMII
#define CONFIG_FEC_MXC_PHYADDR   0
#define CONFIG_PHYLIB
#define CONFIG_ARP_TIMEOUT       200UL

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
#define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS      0
#define CONFIG_USB_KEYBOARD
#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

/* USB Mass Storage Gadget */
#define CONFIG_USB_GADGET
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET_MASS_STORAGE
#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_USB_GADGET_VBUS_DRAW    2

/* Netchip IDs */
#define CONFIG_G_DNL_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
#define CONFIG_G_DNL_MANUFACTURER "Gateworks"

/* Framebuffer and LCD */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK          260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

/* serial console (ttymxc1,115200) */
#define CONFIG_CONS_INDEX              1
#define CONFIG_BAUDRATE                115200

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT	             "Ventana > "
#define CONFIG_SYS_CBSIZE	             1024
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_HWCONFIG

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	           16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

/* Memory configuration */
#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
#define CONFIG_SYS_TEXT_BASE	         0x17800000
#define CONFIG_SYS_LOAD_ADDR           0x12000000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH  /* no NOR flash */

/*
 * MTD Command for mtdparts
 */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#ifdef CONFIG_SPI_FLASH
#define MTDIDS_DEFAULT    "nor0=nor"
#define MTDPARTS_DEFAULT  \
	"mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
#else
#define MTDIDS_DEFAULT    "nand0=nand"
#define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
#endif

/* Persistent Environment Config */
#define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
#ifdef CONFIG_SPI_FLASH
#define CONFIG_ENV_IS_IN_SPI_FLASH
#else
#define CONFIG_ENV_IS_IN_NAND
#endif
#if defined(CONFIG_ENV_IS_IN_MMC)
  #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
  #define CONFIG_ENV_SIZE                (8 * 1024)
  #define CONFIG_SYS_MMC_ENV_DEV         0
#elif defined(CONFIG_ENV_IS_IN_NAND)
  #define CONFIG_ENV_OFFSET              (16 << 20)
  #define CONFIG_ENV_SECT_SIZE           (128 << 10)
  #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
  #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 << 10))
  #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
  #define CONFIG_ENV_OFFSET              (512 * 1024)
  #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
  #define CONFIG_ENV_SIZE                (8 * 1024)
  #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
  #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
  #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
  #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
#endif

/* Environment */
#define CONFIG_BOOTDELAY          3
#define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
#define CONFIG_IPADDR             192.168.1.1
#define CONFIG_SERVERIP           192.168.1.146
#define HWCONFIG_DEFAULT \
	"hwconfig=rs232;" \
	"dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \

#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"console=ttymxc1\0" \
	"bootdevs=usb mmc sata flash\0" \
	HWCONFIG_DEFAULT \
	"video=\0" \
	\
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"mtdids=" MTDIDS_DEFAULT "\0" \
	\
	"fdt_high=0xffffffff\0" \
	"fdt_addr=0x18000000\0" \
	"initrd_high=0xffffffff\0" \
	"loadfdt=" \
		"if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
			"echo Loaded DTB from boot/${fdt_file}; " \
		"elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
			"echo Loaded DTB from boot/${fdt_file1}; " \
		"elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
				"echo Loaded DTB from boot/${fdt_file2}; " \
		"fi\0" \
	\
	"script=boot/6x_bootscript-ventana\0" \
	"loadscript=" \
		"if ${fsload} ${loadaddr} ${script}; then " \
			"source; " \
		"fi\0" \
	\
	"uimage=boot/uImage\0" \
	"mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
	"mmc_boot=" \
		"setenv fsload 'ext2load mmc 0:1'; " \
		"mmc dev 0 && mmc rescan && " \
		"run loadscript; " \
		"if ${fsload} ${loadaddr} ${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/mmcblk0p1 rootfstype=ext4 " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt && fdt addr ${fdt_addr}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0" \
	\
	"sata_boot=" \
		"setenv fsload 'ext2load sata 0:1'; sata init && " \
		"run loadscript; " \
		"if ${fsload} ${loadaddr} ${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/sda1 rootfstype=ext4 " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt && fdt addr ${fdt_addr}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0" \
	"usb_boot=" \
		"setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
		"run loadscript; " \
		"if ${fsload} ${loadaddr} ${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/sda1 rootfstype=ext4 " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt && fdt addr ${fdt_addr}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0"

#ifdef CONFIG_SPI_FLASH
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
	"image_uboot=ventana/u-boot_spi.imx\0" \
	\
	"spi_koffset=0x90000\0" \
	"spi_klen=0x200000\0" \
	\
	"spi_updateuboot=echo Updating uboot from " \
		"${serverip}:${image_uboot}...; " \
		"tftpboot ${loadaddr} ${image_uboot} && " \
		"sf probe && sf erase 0 80000 && " \
			"sf write ${loadaddr} 400 ${filesize}\0" \
	"spi_update=echo Updating OS from ${serverip}:${image_os} " \
		"to ${spi_koffset} ...; " \
		"tftp ${loadaddr} ${image_os} && " \
		"sf probe && " \
		"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
	\
	"flash_boot=" \
		"if sf probe && " \
		"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/mtdblock3 " \
				"rootfstype=squashfs,jffs2 " \
				"${video} ${extra}; " \
			"bootm; " \
		"fi\0"
#else
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
	\
	"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
		"tftp ${loadaddr} ${image_rootfs} && " \
		"nand erase.part rootfs && " \
		"nand write ${loadaddr} rootfs ${filesize}\0" \
	\
	"flash_boot=" \
		"setenv fsload 'ubifsload'; " \
		"ubi part rootfs && ubifsmount ubi0:rootfs; " \
		"run loadscript; " \
		"if ${fsload} ${loadaddr} ${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=ubi0:rootfs ubi.mtd=2 " \
				"rootfstype=ubifs ${video} ${extra}; " \
			"if run loadfdt && fdt addr ${fdt_addr}; then " \
				"ubifsumount; " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"ubifsumount; bootm; " \
			"fi; " \
		"fi\0"
#endif

#define CONFIG_BOOTCOMMAND \
	"for btype in ${bootdevs}; do " \
		"echo; echo Attempting ${btype} boot...; " \
		"if run ${btype}_boot; then; fi; " \
	"done"

/* Device Tree Support */
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_LIBFDT
#define CONFIG_FDT_FIXUP_PARTITIONS

#ifndef CONFIG_SYS_DCACHE_OFF
  #define CONFIG_CMD_CACHE
#endif

#endif			       /* __CONFIG_H */
Commit	Line	Data
59189a8b TH	1	/*
	2	* Copyright (C) 2013 Gateworks Corporation
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
0cc11dea TH	10	/* SPL */
	11	#define CONFIG_SPL_NAND_SUPPORT
	12	#define CONFIG_SPL_MMC_SUPPORT
	13	#define CONFIG_SPL_FAT_SUPPORT
	14	/*
	15	#define CONFIG_SPL_SATA_SUPPORT
	16	*/
	17	/* Location in NAND to read U-Boot from */
	18	#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
	19
	20	#include "imx6_spl.h" /* common IMX6 SPL configuration */
59189a8b TH	21	#include "mx6_common.h"
	22	#define CONFIG_MX6
	23	#define CONFIG_DISPLAY_CPUINFO /* display cpu info */
	24	#define CONFIG_DISPLAY_BOARDINFO_LATE /* display board info (after reloc) */
	25
	26	#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
	27
	28	#include <asm/arch/imx-regs.h>
	29	#include <asm/imx-common/gpio.h>
	30
	31	/* ATAGs */
	32	#define CONFIG_CMDLINE_TAG
	33	#define CONFIG_SETUP_MEMORY_TAGS
	34	#define CONFIG_INITRD_TAG
	35	#define CONFIG_SERIAL_TAG
	36	#define CONFIG_REVISION_TAG
	37
effb7dc6 TH	38	#define CONFIG_SYS_GENERIC_BOARD
effb7dc6 TH	39
59189a8b TH	40	/* Size of malloc() pool */
	41	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	42
	43	/* Init Functions */
	44	#define CONFIG_BOARD_EARLY_INIT_F
	45	#define CONFIG_MISC_INIT_R
	46
	47	/* GPIO */
	48	#define CONFIG_MXC_GPIO
	49
	50	/* Serial */
	51	#define CONFIG_MXC_UART
	52	#define CONFIG_MXC_UART_BASE UART2_BASE
	53
	54	#ifdef CONFIG_SPI_FLASH
	55
	56	/* SPI */
	57	#define CONFIG_CMD_SF
	58	#ifdef CONFIG_CMD_SF
	59	#define CONFIG_MXC_SPI
	60	#define CONFIG_SPI_FLASH_MTD
	61	#define CONFIG_SPI_FLASH_BAR
	62	#define CONFIG_SPI_FLASH_WINBOND
	63	#define CONFIG_SF_DEFAULT_BUS 0
155fa9af	64	#define CONFIG_SF_DEFAULT_CS 0
59189a8b TH	65	/* GPIO 3-19 (21248) */
	66	#define CONFIG_SF_DEFAULT_SPEED 30000000
	67	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	68	#endif
	69
	70	#else
	71	/* Enable NAND support */
	72	#define CONFIG_CMD_TIME
	73	#define CONFIG_CMD_NAND
	74	#define CONFIG_CMD_NAND_TRIMFFS
	75	#ifdef CONFIG_CMD_NAND
	76	#define CONFIG_NAND_MXS
	77	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	78	#define CONFIG_SYS_NAND_BASE 0x40000000
	79	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	80	#define CONFIG_SYS_NAND_ONFI_DETECTION
	81
	82	/* DMA stuff, needed for GPMI/MXS NAND support */
	83	#define CONFIG_APBH_DMA
	84	#define CONFIG_APBH_DMA_BURST
	85	#define CONFIG_APBH_DMA_BURST8
	86	#endif
	87
	88	#endif /* CONFIG_SPI_FLASH */
	89
	90	/* Flattened Image Tree Suport */
	91	#define CONFIG_FIT
	92	#define CONFIG_FIT_VERBOSE
	93
	94	/* I2C Configs */
	95	#define CONFIG_CMD_I2C
	96	#define CONFIG_SYS_I2C
	97	#define CONFIG_SYS_I2C_MXC
9c0fe83e TH	98	#define CONFIG_SYS_I2C_SPEED 100000
	99	#define CONFIG_I2C_GSC 0
	100	#define CONFIG_I2C_PMIC 1
59189a8b TH	101
	102	/* MMC Configs */
	103	#define CONFIG_FSL_ESDHC
	104	#define CONFIG_FSL_USDHC
	105	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	106	#define CONFIG_SYS_FSL_USDHC_NUM 1
	107	#define CONFIG_MMC
	108	#define CONFIG_CMD_MMC
	109	#define CONFIG_GENERIC_MMC
	110	#define CONFIG_BOUNCE_BUFFER
	111
	112	/* Filesystem support */
	113	#define CONFIG_CMD_EXT2
	114	#define CONFIG_CMD_FAT
	115	#define CONFIG_CMD_UBIFS
	116	#define CONFIG_DOS_PARTITION
	117
59189a8b TH	118	/*
	119	* SATA Configs
	120	*/
	121	#define CONFIG_CMD_SATA
	122	#ifdef CONFIG_CMD_SATA
	123	#define CONFIG_DWC_AHSATA
	124	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	125	#define CONFIG_DWC_AHSATA_PORT_ID 0
	126	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	127	#define CONFIG_LBA48
	128	#define CONFIG_LIBATA
	129	#endif
	130
	131	/*
	132	* PCI express
	133	*/
	134	#define CONFIG_CMD_PCI
	135	#ifdef CONFIG_CMD_PCI
	136	#define CONFIG_PCI
	137	#define CONFIG_PCI_PNP
	138	#define CONFIG_PCI_SCAN_SHOW
dad08286	139	#define CONFIG_PCI_FIXUP_DEV
59189a8b TH	140	#define CONFIG_PCIE_IMX
	141	#endif
	142
	143	/*
	144	* PMIC
	145	*/
	146	#define CONFIG_POWER
	147	#define CONFIG_POWER_I2C
	148	#define CONFIG_POWER_PFUZE100
	149	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
234d89da TH	150	#define CONFIG_POWER_LTC3676
234d89da TH	151	#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
59189a8b TH	152
	153	/* Various command support */
	154	#include <config_cmd_default.h>
	155	#undef CONFIG_CMD_IMLS
	156	#define CONFIG_CMD_PING
	157	#define CONFIG_CMD_DHCP
	158	#define CONFIG_CMD_MII
	159	#define CONFIG_CMD_NET
	160	#define CONFIG_CMD_BMODE /* set eFUSE shadow for a boot dev and reset */
	161	#define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */
	162	#define CONFIG_CMD_SETEXPR
	163	#define CONFIG_CMD_BOOTZ
	164	#define CONFIG_CMD_GSC
9c0fe83e	165	#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */
59189a8b TH	166	#define CONFIG_CMD_UBI
	167	#define CONFIG_RBTREE
	168	#define CONFIG_LZO
	169	#define CONFIG_CMD_FUSE /* eFUSE read/write support */
	170	#ifdef CONFIG_CMD_FUSE
	171	#define CONFIG_MXC_OCOTP
	172	#endif
	173
	174
	175	/* Ethernet support */
	176	#define CONFIG_FEC_MXC
0a6ee033	177	#define CONFIG_E1000
59189a8b TH	178	#define CONFIG_MII
	179	#define IMX_FEC_BASE ENET_BASE_ADDR
	180	#define CONFIG_FEC_XCV_TYPE RGMII
59189a8b TH	181	#define CONFIG_FEC_MXC_PHYADDR 0
	182	#define CONFIG_PHYLIB
	183	#define CONFIG_ARP_TIMEOUT 200UL
	184
	185	/* USB Configs */
	186	#define CONFIG_CMD_USB
	187	#define CONFIG_USB_EHCI
	188	#define CONFIG_USB_EHCI_MX6
	189	#define CONFIG_USB_STORAGE
	190	#define CONFIG_USB_HOST_ETHER
	191	#define CONFIG_USB_ETHER_ASIX
	192	#define CONFIG_USB_ETHER_SMSC95XX
	193	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	194	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	195	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	196	#define CONFIG_MXC_USB_FLAGS 0
	197	#define CONFIG_USB_KEYBOARD
	198	#define CONFIG_CI_UDC
	199	#define CONFIG_USBD_HS
	200	#define CONFIG_USB_GADGET_DUALSPEED
	201	#define CONFIG_USB_ETHER
	202	#define CONFIG_USB_ETH_CDC
	203	#define CONFIG_NETCONSOLE
	204	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
59189a8b	205
9543e954 TH	206	/* USB Mass Storage Gadget */
	207	#define CONFIG_USB_GADGET
	208	#define CONFIG_CMD_USB_MASS_STORAGE
	209	#define CONFIG_USB_GADGET_MASS_STORAGE
	210	#define CONFIG_USBDOWNLOAD_GADGET
	211	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	212
	213	/* Netchip IDs */
	214	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	215	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	216	#define CONFIG_G_DNL_MANUFACTURER "Gateworks"
	217
7a278f9f TH	218	/* Framebuffer and LCD */
	219	#define CONFIG_VIDEO
	220	#define CONFIG_VIDEO_IPUV3
	221	#define CONFIG_CFB_CONSOLE
	222	#define CONFIG_VGA_AS_SINGLE_DEVICE
	223	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	224	#define CONFIG_VIDEO_BMP_RLE8
	225	#define CONFIG_SPLASH_SCREEN
	226	#define CONFIG_BMP_16BPP
	227	#define CONFIG_VIDEO_LOGO
	228	#define CONFIG_IPUV3_CLK 260000000
	229	#define CONFIG_CMD_HDMIDETECT
	230	#define CONFIG_CONSOLE_MUX
	231	#define CONFIG_IMX_HDMI
	232	#define CONFIG_IMX_VIDEO_SKIP
	233
59189a8b TH	234	/* serial console (ttymxc1,115200) */
	235	#define CONFIG_CONS_INDEX 1
	236	#define CONFIG_BAUDRATE 115200
	237
	238	/* Miscellaneous configurable options */
	239	#define CONFIG_SYS_LONGHELP
	240	#define CONFIG_SYS_HUSH_PARSER
	241	#define CONFIG_SYS_PROMPT "Ventana > "
	242	#define CONFIG_SYS_CBSIZE 1024
	243	#define CONFIG_AUTO_COMPLETE
	244	#define CONFIG_CMDLINE_EDITING
	245	#define CONFIG_HWCONFIG
	246
	247	/* Print Buffer Size */
	248	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	249	#define CONFIG_SYS_MAXARGS 16
	250	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	251
	252	/* Memory configuration */
	253	#define CONFIG_SYS_MEMTEST_START 0x10000000
	254	#define CONFIG_SYS_MEMTEST_END 0x10010000
	255	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	256	#define CONFIG_SYS_TEXT_BASE 0x17800000
	257	#define CONFIG_SYS_LOAD_ADDR 0x12000000
	258
	259	/* Physical Memory Map */
	260	#define CONFIG_NR_DRAM_BANKS 1
	261	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	262	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	263	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	264	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	265
	266	#define CONFIG_SYS_INIT_SP_OFFSET \
	267	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	268	#define CONFIG_SYS_INIT_SP_ADDR \
	269	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	270
	271	/* FLASH and environment organization */
	272	#define CONFIG_SYS_NO_FLASH /* no NOR flash */
	273
	274	/*
	275	* MTD Command for mtdparts
	276	*/
	277	#define CONFIG_CMD_MTDPARTS
	278	#define CONFIG_MTD_DEVICE
	279	#define CONFIG_MTD_PARTITIONS
	280	#ifdef CONFIG_SPI_FLASH
	281	#define MTDIDS_DEFAULT "nor0=nor"
	282	#define MTDPARTS_DEFAULT \
	283	"mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
	284	#else
	285	#define MTDIDS_DEFAULT "nand0=nand"
	286	#define MTDPARTS_DEFAULT "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
	287	#endif
	288
	289	/* Persistent Environment Config */
	290	#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
	291	#ifdef CONFIG_SPI_FLASH
	292	#define CONFIG_ENV_IS_IN_SPI_FLASH
	293	#else
	294	#define CONFIG_ENV_IS_IN_NAND
	295	#endif
	296	#if defined(CONFIG_ENV_IS_IN_MMC)
	297	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
298	#define CONFIG_ENV_SIZE (8 * 1024)
299	#define CONFIG_SYS_MMC_ENV_DEV 0
300	#elif defined(CONFIG_ENV_IS_IN_NAND)
301	#define CONFIG_ENV_OFFSET (16 << 20)
302	#define CONFIG_ENV_SECT_SIZE (128 << 10)
303	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
304	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
305	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
306	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
307	#define CONFIG_ENV_OFFSET (512 * 1024)
308	#define CONFIG_ENV_SECT_SIZE (64 * 1024)
309	#define CONFIG_ENV_SIZE (8 * 1024)
310	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
311	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
312	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
313	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
314	#endif
315
316	/* Environment */
317	#define CONFIG_BOOTDELAY 3
318	#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
319	#define CONFIG_IPADDR 192.168.1.1
320	#define CONFIG_SERVERIP 192.168.1.146
321	#define HWCONFIG_DEFAULT \
322	"hwconfig=rs232;" \
323	"dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
324
325	#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
326	"console=ttymxc1\0" \
327	"bootdevs=usb mmc sata flash\0" \
328	HWCONFIG_DEFAULT \
329	"video=\0" \
330	\
331	"mtdparts=" MTDPARTS_DEFAULT "\0" \
332	"mtdids=" MTDIDS_DEFAULT "\0" \
333	\
334	"fdt_high=0xffffffff\0" \
335	"fdt_addr=0x18000000\0" \
8cc25eb8	336	"initrd_high=0xffffffff\0" \
59189a8b TH	337	"loadfdt=" \
	338	"if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
	339	"echo Loaded DTB from boot/${fdt_file}; " \
	340	"elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
	341	"echo Loaded DTB from boot/${fdt_file1}; " \
	342	"elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
	343	"echo Loaded DTB from boot/${fdt_file2}; " \
	344	"fi\0" \
	345	\
	346	"script=boot/6x_bootscript-ventana\0" \
	347	"loadscript=" \
	348	"if ${fsload} ${loadaddr} ${script}; then " \
	349	"source; " \
	350	"fi\0" \
	351	\
	352	"uimage=boot/uImage\0" \
	353	"mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
	354	"mmc_boot=" \
	355	"setenv fsload 'ext2load mmc 0:1'; " \
	356	"mmc dev 0 && mmc rescan && " \
	357	"run loadscript; " \
	358	"if ${fsload} ${loadaddr} ${uimage}; then " \
	359	"setenv bootargs console=${console},${baudrate} " \
	360	"root=/dev/mmcblk0p1 rootfstype=ext4 " \
	361	"rootwait rw ${video} ${extra}; " \
	362	"if run loadfdt && fdt addr ${fdt_addr}; then " \
	363	"bootm ${loadaddr} - ${fdt_addr}; " \
	364	"else " \
	365	"bootm; " \
	366	"fi; " \
	367	"fi\0" \
	368	\
	369	"sata_boot=" \
	370	"setenv fsload 'ext2load sata 0:1'; sata init && " \
	371	"run loadscript; " \
	372	"if ${fsload} ${loadaddr} ${uimage}; then " \
	373	"setenv bootargs console=${console},${baudrate} " \
	374	"root=/dev/sda1 rootfstype=ext4 " \
	375	"rootwait rw ${video} ${extra}; " \
	376	"if run loadfdt && fdt addr ${fdt_addr}; then " \
	377	"bootm ${loadaddr} - ${fdt_addr}; " \
	378	"else " \
	379	"bootm; " \
	380	"fi; " \
	381	"fi\0" \
	382	"usb_boot=" \
	383	"setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
	384	"run loadscript; " \
	385	"if ${fsload} ${loadaddr} ${uimage}; then " \
	386	"setenv bootargs console=${console},${baudrate} " \
	387	"root=/dev/sda1 rootfstype=ext4 " \
	388	"rootwait rw ${video} ${extra}; " \
	389	"if run loadfdt && fdt addr ${fdt_addr}; then " \
	390	"bootm ${loadaddr} - ${fdt_addr}; " \
	391	"else " \
	392	"bootm; " \
	393	"fi; " \
	394	"fi\0"
	395
	396	#ifdef CONFIG_SPI_FLASH
	397	#define CONFIG_EXTRA_ENV_SETTINGS \
	398	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	399	"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
	400	"image_uboot=ventana/u-boot_spi.imx\0" \
401	\
402	"spi_koffset=0x90000\0" \
403	"spi_klen=0x200000\0" \
404	\
405	"spi_updateuboot=echo Updating uboot from " \
406	"${serverip}:${image_uboot}...; " \
407	"tftpboot ${loadaddr} ${image_uboot} && " \
408	"sf probe && sf erase 0 80000 && " \
409	"sf write ${loadaddr} 400 ${filesize}\0" \
410	"spi_update=echo Updating OS from ${serverip}:${image_os} " \
411	"to ${spi_koffset} ...; " \
412	"tftp ${loadaddr} ${image_os} && " \
413	"sf probe && " \
414	"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
415	\
416	"flash_boot=" \
417	"if sf probe && " \
418	"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
419	"setenv bootargs console=${console},${baudrate} " \
420	"root=/dev/mtdblock3 " \
421	"rootfstype=squashfs,jffs2 " \
422	"${video} ${extra}; " \
423	"bootm; " \
424	"fi\0"
425	#else
426	#define CONFIG_EXTRA_ENV_SETTINGS \
427	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
428	"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
429	\
430	"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
431	"tftp ${loadaddr} ${image_rootfs} && " \
432	"nand erase.part rootfs && " \
433	"nand write ${loadaddr} rootfs ${filesize}\0" \
434	\
435	"flash_boot=" \
436	"setenv fsload 'ubifsload'; " \
437	"ubi part rootfs && ubifsmount ubi0:rootfs; " \
438	"run loadscript; " \
439	"if ${fsload} ${loadaddr} ${uimage}; then " \
440	"setenv bootargs console=${console},${baudrate} " \
441	"root=ubi0:rootfs ubi.mtd=2 " \
442	"rootfstype=ubifs ${video} ${extra}; " \
443	"if run loadfdt && fdt addr ${fdt_addr}; then " \
444	"ubifsumount; " \
445	"bootm ${loadaddr} - ${fdt_addr}; " \
446	"else " \
447	"ubifsumount; bootm; " \
448	"fi; " \
449	"fi\0"
450	#endif
451
452	#define CONFIG_BOOTCOMMAND \
453	"for btype in ${bootdevs}; do " \
454	"echo; echo Attempting ${btype} boot...; " \
455	"if run ${btype}_boot; then; fi; " \
456	"done"
457
458	/* Device Tree Support */
459	#define CONFIG_OF_BOARD_SETUP
460	#define CONFIG_OF_LIBFDT
461	#define CONFIG_FDT_FIXUP_PARTITIONS
462
463	#ifndef CONFIG_SYS_DCACHE_OFF
464	#define CONFIG_CMD_CACHE
465	#endif
466
467	#endif /* __CONFIG_H */