[people/ms/u-boot.git] / include / configs / h2200.h

/*
 * iPAQ h2200 board configuration
 *
 * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_MACH_TYPE		MACH_TYPE_H2200

#define CONFIG_CPU_PXA25X		1
#define CONFIG_BOARD_H2200

#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM_1			0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE		0x04000000 /* 64 MB */

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_SDRAM_SIZE		PHYS_SDRAM_1_SIZE

#define CONFIG_SYS_INIT_SP_ADDR		0xfffff800

#define CONFIG_ENV_SIZE			0x00040000
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)

#define CONFIG_SYS_LOAD_ADDR		0xa3000000 /* default load address */

/*
 * iPAQ 1st stage bootloader loads 2nd stage bootloader
 * at address 0xa0040000 but bootloader requires header
 * which is 0x1000 long.
 *
 * --- Header begin ---
 *	.word 0xea0003fe ; b 0x1000
 *
 *	.org 0x40
 *	.ascii "ECEC"
 *
 *	.org 0x1000
 * --- Header end ---
 */

/*
 * Static chips
 */

#define CONFIG_SYS_MSC0_VAL		0x246c7ffc
#define CONFIG_SYS_MSC1_VAL		0x7ff07ff0
#define CONFIG_SYS_MSC2_VAL		0x7ff07ff0

/*
 * PCMCIA and CF Interfaces
 */

#define CONFIG_SYS_MECR_VAL		0x00000000
#define CONFIG_SYS_MCMEM0_VAL		0x00000000
#define CONFIG_SYS_MCMEM1_VAL		0x00000000
#define CONFIG_SYS_MCATT0_VAL		0x00000000
#define CONFIG_SYS_MCATT1_VAL		0x00000000
#define CONFIG_SYS_MCIO0_VAL		0x00000000
#define CONFIG_SYS_MCIO1_VAL		0x00000000

#define CONFIG_SYS_FLYCNFG_VAL		0x00000000
#define CONFIG_SYS_SXCNFG_VAL		0x00040004

#define CONFIG_SYS_MDREFR_VAL		0x0099E018
#define CONFIG_SYS_MDCNFG_VAL		0x01C801CB
#define CONFIG_SYS_MDMRS_VAL		0x00220022

#define CONFIG_SYS_PSSR_VAL		0x00000000
#define CONFIG_SYS_CKEN			0x00004840
#define CONFIG_SYS_CCCR			0x00000161

/*
 * GPIOs
 */

#define CONFIG_SYS_GPSR0_VAL		0x01000000
#define CONFIG_SYS_GPSR1_VAL		0x00000000
#define CONFIG_SYS_GPSR2_VAL		0x00010000

#define CONFIG_SYS_GPCR0_VAL		0x00000000
#define CONFIG_SYS_GPCR1_VAL		0x00000000
#define CONFIG_SYS_GPCR2_VAL		0x00000000

#define CONFIG_SYS_GPDR0_VAL		0xF7E38C00
#define CONFIG_SYS_GPDR1_VAL		0xBCFFBF83
#define CONFIG_SYS_GPDR2_VAL		0x000157FF

#define CONFIG_SYS_GAFR0_L_VAL		0x80401000
#define CONFIG_SYS_GAFR0_U_VAL		0x00000112
#define CONFIG_SYS_GAFR1_L_VAL		0x600A9550
#define CONFIG_SYS_GAFR1_U_VAL		0x0005AAAA
#define CONFIG_SYS_GAFR2_L_VAL		0x20000000
#define CONFIG_SYS_GAFR2_U_VAL		0x00000000

/*
 * Serial port
 */
#define CONFIG_FFUART
#define CONFIG_CONS_INDEX		3

#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 38400, 115200 }

#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG

/* Monitor Command Prompt */

#define CONFIG_USB_DEV_PULLUP_GPIO	33
/* USB VBUS GPIO 3 */

#define CONFIG_BOOTCOMMAND		\
	"setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
	"if bootp ; then setenv downloaded 1 ; fi ; done ; " \
	"source :script ; " \
	"bootm ; "

#define CONFIG_USB_GADGET_PXA2XX
#define CONFIG_USB_ETH_SUBSET

#define CONFIG_USBNET_DEV_ADDR		"de:ad:be:ef:00:01"
#define CONFIG_EXTRA_ENV_SETTINGS \
	"stdin=serial\0" \
	"stdout=serial\0" \
	"stderr=serial\0"

#endif /* __CONFIG_H */
Commit	Line	Data
34cda7a0 ŁD	1	/*
	2	* iPAQ h2200 board configuration
	3	*
	4	* Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
34cda7a0 ŁD	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
34cda7a0 ŁD	12	#define CONFIG_MACH_TYPE MACH_TYPE_H2200
	13
	14	#define CONFIG_CPU_PXA25X 1
	15	#define CONFIG_BOARD_H2200
	16
34cda7a0 ŁD	17	#define CONFIG_NR_DRAM_BANKS 1
	18	#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
	19	#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
	20
	21	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	22	#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE
	23
	24	#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
	25
	26	#define CONFIG_ENV_SIZE 0x00040000
	27	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
	28
34cda7a0 ŁD	29	#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
	30
	31	/*
	32	* iPAQ 1st stage bootloader loads 2nd stage bootloader
	33	* at address 0xa0040000 but bootloader requires header
	34	* which is 0x1000 long.
	35	*
	36	* --- Header begin ---
	37	* .word 0xea0003fe ; b 0x1000
	38	*
	39	* .org 0x40
	40	* .ascii "ECEC"
	41	*
	42	* .org 0x1000
	43	* --- Header end ---
	44	*/
	45
34cda7a0 ŁD	46	/*
	47	* Static chips
	48	*/
	49
	50	#define CONFIG_SYS_MSC0_VAL 0x246c7ffc
	51	#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
	52	#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
	53
	54	/*
	55	* PCMCIA and CF Interfaces
	56	*/
	57
	58	#define CONFIG_SYS_MECR_VAL 0x00000000
	59	#define CONFIG_SYS_MCMEM0_VAL 0x00000000
	60	#define CONFIG_SYS_MCMEM1_VAL 0x00000000
	61	#define CONFIG_SYS_MCATT0_VAL 0x00000000
	62	#define CONFIG_SYS_MCATT1_VAL 0x00000000
	63	#define CONFIG_SYS_MCIO0_VAL 0x00000000
	64	#define CONFIG_SYS_MCIO1_VAL 0x00000000
	65
	66	#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
	67	#define CONFIG_SYS_SXCNFG_VAL 0x00040004
	68
	69	#define CONFIG_SYS_MDREFR_VAL 0x0099E018
	70	#define CONFIG_SYS_MDCNFG_VAL 0x01C801CB
	71	#define CONFIG_SYS_MDMRS_VAL 0x00220022
	72
	73	#define CONFIG_SYS_PSSR_VAL 0x00000000
	74	#define CONFIG_SYS_CKEN 0x00004840
	75	#define CONFIG_SYS_CCCR 0x00000161
	76
	77	/*
	78	* GPIOs
	79	*/
	80
	81	#define CONFIG_SYS_GPSR0_VAL 0x01000000
	82	#define CONFIG_SYS_GPSR1_VAL 0x00000000
	83	#define CONFIG_SYS_GPSR2_VAL 0x00010000
	84
	85	#define CONFIG_SYS_GPCR0_VAL 0x00000000
	86	#define CONFIG_SYS_GPCR1_VAL 0x00000000
	87	#define CONFIG_SYS_GPCR2_VAL 0x00000000
	88
	89	#define CONFIG_SYS_GPDR0_VAL 0xF7E38C00
	90	#define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83
	91	#define CONFIG_SYS_GPDR2_VAL 0x000157FF
	92
	93	#define CONFIG_SYS_GAFR0_L_VAL 0x80401000
	94	#define CONFIG_SYS_GAFR0_U_VAL 0x00000112
	95	#define CONFIG_SYS_GAFR1_L_VAL 0x600A9550
	96	#define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA
	97	#define CONFIG_SYS_GAFR2_L_VAL 0x20000000
	98	#define CONFIG_SYS_GAFR2_U_VAL 0x00000000
	99
	100	/*
	101	* Serial port
	102	*/
34cda7a0 ŁD	103	#define CONFIG_FFUART
	104	#define CONFIG_CONS_INDEX 3
	105
34cda7a0 ŁD	106	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
34cda7a0 ŁD	107
34cda7a0 ŁD	108	#define CONFIG_SETUP_MEMORY_TAGS
	109	#define CONFIG_CMDLINE_TAG
	110	#define CONFIG_INITRD_TAG
	111
	112	/* Monitor Command Prompt */
34cda7a0	113
a33fada1 LD	114	#define CONFIG_USB_DEV_PULLUP_GPIO 33
	115	/* USB VBUS GPIO 3 */
	116
a33fada1 LD	117	#define CONFIG_BOOTCOMMAND \
	118	"setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
	119	"if bootp ; then setenv downloaded 1 ; fi ; done ; " \
	120	"source :script ; " \
	121	"bootm ; "
	122
	123	#define CONFIG_USB_GADGET_PXA2XX
a33fada1 LD	124	#define CONFIG_USB_ETH_SUBSET
	125
	126	#define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
a33fada1 LD	127	#define CONFIG_EXTRA_ENV_SETTINGS \
	128	"stdin=serial\0" \
	129	"stdout=serial\0" \
	130	"stderr=serial\0"
	131
34cda7a0	132	#endif /* __CONFIG_H */