[people/ms/u-boot.git] / include / configs / hikey.h

/*
 * (C) Copyright 2015 Linaro
 *
 * Peter Griffin <peter.griffin@linaro.org>
 *
 * Configuration for HiKey 96boards CE. Parts were derived from other ARM
 * configurations.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __HIKEY_H
#define __HIKEY_H

#include <linux/sizes.h>

#define CONFIG_POWER
#define CONFIG_POWER_HI6553

#define CONFIG_REMAKE_ELF

#define CONFIG_SUPPORT_RAW_INITRD

#define CONFIG_IDENT_STRING		"hikey"

#define CONFIG_BOARD_EARLY_INIT_F

/* Physical Memory Map */

/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
#define CONFIG_SYS_TEXT_BASE		0x35000000

#define CONFIG_NR_DRAM_BANKS		6
#define PHYS_SDRAM_1			0x00000000

/* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
#define PHYS_SDRAM_1_SIZE		0x3EFFFFFF

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1

#define CONFIG_SYS_INIT_RAM_SIZE	0x1000

#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)

#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x80000)

/* Generic Timer Definitions */
#define COUNTER_FREQUENCY		19000000

/* Generic Interrupt Controller Definitions */
#define GICD_BASE			0xf6801000
#define GICC_BASE			0xf6802000

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_8M)

/* Serial port PL010/PL011 through the device model */
#define CONFIG_PL01X_SERIAL
#define CONFIG_BAUDRATE			115200

#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2
#define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
/*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
#define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO

#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_MISC_INIT_R
#endif

#define CONFIG_HIKEY_GPIO

/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
#define CONFIG_DWMMC
#define CONFIG_HIKEY_DWMMC
#define CONFIG_BOUNCE_BUFFER

#define CONFIG_FS_EXT4

/* Command line configuration */
#define CONFIG_MENU
#define CONFIG_CMD_UNZIP
#define CONFIG_CMD_ENV

#define CONFIG_MTD_PARTITIONS

/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE

#include <config_distro_defaults.h>

/* Initial environment variables */

/*
 * Defines where the kernel and FDT will be put in RAM
 */

/* Assume we boot with root on the seventh partition of eMMC */
#define CONFIG_BOOTARGS	"console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw"

#define BOOT_TARGET_DEVICES(func) \
	func(USB, usb, 0) \
	func(MMC, mmc, 1) \
	func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>

#define CONFIG_EXTRA_ENV_SETTINGS	\
				"kernel_name=Image\0"	\
				"kernel_addr_r=0x00080000\0" \
				"fdtfile=hi6220-hikey.dtb\0" \
				"fdt_addr_r=0x02000000\0" \
				"fdt_high=0xffffffffffffffff\0" \
				"initrd_high=0xffffffffffffffff\0" \
				BOOTENV

/* Preserve environment on sd card */
#define CONFIG_COMMAND_HISTORY

#define CONFIG_ENV_SIZE			0x1000
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE               "mmc"
#define FAT_ENV_DEVICE_AND_PART         "1:1"
#define FAT_ENV_FILE                    "uboot.env"
#define CONFIG_FAT_WRITE
#define CONFIG_ENV_VARS_UBOOT_CONFIG

/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS		64	/* max command args */

#define CONFIG_SYS_NO_FLASH

#endif /* __HIKEY_H */
Commit	Line	Data
11ac2363 PG	1	/*
	2	* (C) Copyright 2015 Linaro
	3	*
	4	* Peter Griffin <peter.griffin@linaro.org>
	5	*
	6	* Configuration for HiKey 96boards CE. Parts were derived from other ARM
	7	* configurations.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __HIKEY_H
	13	#define __HIKEY_H
	14
c9a67d24 PG	15	#include <linux/sizes.h>
c9a67d24 PG	16
11ac2363 PG	17	#define CONFIG_POWER
	18	#define CONFIG_POWER_HI6553
	19
	20	#define CONFIG_REMAKE_ELF
	21
	22	#define CONFIG_SUPPORT_RAW_INITRD
	23
11ac2363 PG	24	#define CONFIG_IDENT_STRING "hikey"
11ac2363 PG	25
9c71bcdc PG	26	#define CONFIG_BOARD_EARLY_INIT_F
9c71bcdc PG	27
11ac2363 PG	28	/* Physical Memory Map */
	29
	30	/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
	31	#define CONFIG_SYS_TEXT_BASE 0x35000000
	32
305b9091	33	#define CONFIG_NR_DRAM_BANKS 6
11ac2363 PG	34	#define PHYS_SDRAM_1 0x00000000
	35
	36	/* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
05e682d4 PG	37	#define PHYS_SDRAM_1_SIZE 0x3EFFFFFF
05e682d4 PG	38
11ac2363 PG	39	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	40
	41	#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
	42
	43	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
	44
	45	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
	46
	47	/* Generic Timer Definitions */
	48	#define COUNTER_FREQUENCY 19000000
	49
	50	/* Generic Interrupt Controller Definitions */
	51	#define GICD_BASE 0xf6801000
	52	#define GICC_BASE 0xf6802000
	53
	54	/* Size of malloc() pool */
c9a67d24	55	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
11ac2363	56
9c71bcdc PG	57	/* Serial port PL010/PL011 through the device model */
9c71bcdc PG	58	#define CONFIG_PL01X_SERIAL
11ac2363 PG	59	#define CONFIG_BAUDRATE 115200
11ac2363 PG	60
11ac2363 PG	61	#ifdef CONFIG_CMD_USB
	62	#define CONFIG_USB_DWC2
	63	#define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
	64	/#define CONFIG_DWC2_DFLT_SPEED_FULL/
	65	#define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
	66
11ac2363 PG	67	#define CONFIG_USB_HOST_ETHER
	68	#define CONFIG_USB_ETHER_SMSC95XX
	69	#define CONFIG_USB_ETHER_ASIX
	70	#define CONFIG_MISC_INIT_R
	71	#endif
	72
	73	#define CONFIG_HIKEY_GPIO
11ac2363 PG	74
	75	/* SD/MMC configuration */
	76	#define CONFIG_GENERIC_MMC
	77	#define CONFIG_MMC
	78	#define CONFIG_DWMMC
	79	#define CONFIG_HIKEY_DWMMC
	80	#define CONFIG_BOUNCE_BUFFER
11ac2363 PG	81
	82	#define CONFIG_FS_EXT4
	83
	84	/* Command line configuration */
	85	#define CONFIG_MENU
11ac2363 PG	86	#define CONFIG_CMD_UNZIP
	87	#define CONFIG_CMD_ENV
	88
	89	#define CONFIG_MTD_PARTITIONS
	90
	91	/* BOOTP options */
	92	#define CONFIG_BOOTP_BOOTFILESIZE
	93
	94	#include <config_distro_defaults.h>
	95
	96	/* Initial environment variables */
	97
	98	/*
	99	* Defines where the kernel and FDT will be put in RAM
	100	*/
	101
	102	/* Assume we boot with root on the seventh partition of eMMC */
	103	#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw"
	104
	105	#define BOOT_TARGET_DEVICES(func) \
	106	func(USB, usb, 0) \
	107	func(MMC, mmc, 1) \
	108	func(DHCP, dhcp, na)
	109	#include <config_distro_bootcmd.h>
	110
	111	#define CONFIG_EXTRA_ENV_SETTINGS \
	112	"kernel_name=Image\0" \
	113	"kernel_addr_r=0x00080000\0" \
da3e620d	114	"fdtfile=hi6220-hikey.dtb\0" \
11ac2363 PG	115	"fdt_addr_r=0x02000000\0" \
	116	"fdt_high=0xffffffffffffffff\0" \
	117	"initrd_high=0xffffffffffffffff\0" \
	118	BOOTENV
	119
1cc0a9f4	120	/* Preserve environment on sd card */
11ac2363 PG	121	#define CONFIG_COMMAND_HISTORY
	122
	123	#define CONFIG_ENV_SIZE 0x1000
	124	#define CONFIG_ENV_IS_IN_FAT
	125	#define FAT_ENV_INTERFACE "mmc"
	126	#define FAT_ENV_DEVICE_AND_PART "1:1"
	127	#define FAT_ENV_FILE "uboot.env"
	128	#define CONFIG_FAT_WRITE
	129	#define CONFIG_ENV_VARS_UBOOT_CONFIG
	130
	131	/* Monitor Command Prompt */
	132	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	133	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	134	sizeof(CONFIG_SYS_PROMPT) + 16)
11ac2363 PG	135	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	136	#define CONFIG_SYS_LONGHELP
	137	#define CONFIG_CMDLINE_EDITING
	138	#define CONFIG_SYS_MAXARGS 64 /* max command args */
	139
	140	#define CONFIG_SYS_NO_FLASH
	141
	142	#endif /* __HIKEY_H */