[people/ms/u-boot.git] / include / configs / ids8313.h

/*
 * (C) Copyright 2013
 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * Copyright (c) 2011 IDS GmbH, Germany
 * Sergej Stepanov <ste@ids.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_MPC831x
#define CONFIG_MPC8313
#define CONFIG_IDS8313

#define CONFIG_FSL_ELBC

#define CONFIG_MISC_INIT_R

#define CONFIG_BOOT_RETRY_TIME		900
#define CONFIG_BOOT_RETRY_MIN		30
#define CONFIG_RESET_TO_RETRY

#define CONFIG_83XX_CLKIN		66000000	/* in Hz */
#define CONFIG_SYS_CLK_FREQ		CONFIG_83XX_CLKIN

#define CONFIG_SYS_IMMR		0xF0000000

#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */

/*
 * Hardware Reset Configuration Word
 * if CLKIN is 66.000MHz, then
 * CSB = 132MHz, CORE = 264MHz, DDRC = 264MHz, LBC = 132MHz
 */
#define CONFIG_SYS_HRCW_LOW (0x20000000 /* reserved, must be set */ |\
			     HRCWL_DDR_TO_SCB_CLK_2X1 |\
			     HRCWL_CSB_TO_CLKIN_2X1 |\
			     HRCWL_CORE_TO_CSB_2X1)

#define CONFIG_SYS_HRCW_HIGH	(HRCWH_PCI_HOST |\
				 HRCWH_CORE_ENABLE |\
				 HRCWH_FROM_0XFFF00100 |\
				 HRCWH_BOOTSEQ_DISABLE |\
				 HRCWH_SW_WATCHDOG_DISABLE |\
				 HRCWH_ROM_LOC_LOCAL_8BIT |\
				 HRCWH_RL_EXT_LEGACY |\
				 HRCWH_TSEC1M_IN_MII |\
				 HRCWH_TSEC2M_IN_MII |\
				 HRCWH_BIG_ENDIAN)

#define CONFIG_SYS_SICRH	0x00000000
#define CONFIG_SYS_SICRL	(SICRL_LBC | SICRL_SPI_D)

#define CONFIG_HWCONFIG

#define CONFIG_SYS_HID0_INIT	0x000000000
#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK |\
				 HID0_ENABLE_INSTRUCTION_CACHE |\
				 HID0_DISABLE_DYNAMIC_POWER_MANAGMENT)

#define CONFIG_SYS_HID2	(HID2_HBE | 0x00020000)

/*
 * Definitions for initial stack pointer and data area (in DCACHE )
 */
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000
#define CONFIG_SYS_INIT_RAM_SIZE	0x1000  /* End of used area in DPRAM */
#define CONFIG_SYS_GBL_DATA_SIZE	0x100
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE \
					 - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*
 * Local Bus LCRR and LBCR regs
 */
#define CONFIG_SYS_LCRR_EADC		LCRR_EADC_1
#define CONFIG_SYS_LCRR_CLKDIV		LCRR_CLKDIV_2
#define CONFIG_SYS_LBC_LBCR		(0x00040000 |\
					 (0xFF << LBCR_BMT_SHIFT) |\
					 0xF)

#define CONFIG_SYS_LBC_MRTPR		0x20000000

/*
 * Internal Definitions
 */
/*
 * DDR Setup
 */
#define CONFIG_SYS_DDR_BASE		0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE

/*
 * Manually set up DDR parameters,
 * as this board has not the SPD connected to I2C.
 */
#define CONFIG_SYS_DDR_SIZE		256		/* MB */
#define CONFIG_SYS_DDR_CONFIG		(CSCONFIG_EN |\
					 0x00010000 |\
					 CSCONFIG_ROW_BIT_13 |\
					 CSCONFIG_COL_BIT_10)

#define CONFIG_SYS_DDR_CONFIG_256	(CONFIG_SYS_DDR_CONFIG | \
					 CSCONFIG_BANK_BIT_3)

#define CONFIG_SYS_DDR_TIMING_3	(1 << 16)	/* ext refrec */
#define CONFIG_SYS_DDR_TIMING_0	((3 << TIMING_CFG0_RWT_SHIFT) |\
				(3 << TIMING_CFG0_WRT_SHIFT) |\
				(3 << TIMING_CFG0_RRT_SHIFT) |\
				(3 << TIMING_CFG0_WWT_SHIFT) |\
				(6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) |\
				(2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) |\
				(8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
				(2 << TIMING_CFG0_MRS_CYC_SHIFT))
#define CONFIG_SYS_DDR_TIMING_1	((4 << TIMING_CFG1_PRETOACT_SHIFT) |\
				(12 << TIMING_CFG1_ACTTOPRE_SHIFT) |\
				(4 << TIMING_CFG1_ACTTORW_SHIFT) |\
				(7 << TIMING_CFG1_CASLAT_SHIFT) |\
				(4 << TIMING_CFG1_REFREC_SHIFT) |\
				(4 << TIMING_CFG1_WRREC_SHIFT) |\
				(2 << TIMING_CFG1_ACTTOACT_SHIFT) |\
				(2 << TIMING_CFG1_WRTORD_SHIFT))
#define CONFIG_SYS_DDR_TIMING_2	((1 << TIMING_CFG2_ADD_LAT_SHIFT) |\
				(5 << TIMING_CFG2_CPO_SHIFT) |\
				(4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) |\
				(2 << TIMING_CFG2_RD_TO_PRE_SHIFT) |\
				(0 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) |\
				(1 << TIMING_CFG2_CKE_PLS_SHIFT) |\
				(6 << TIMING_CFG2_FOUR_ACT_SHIFT))

#define CONFIG_SYS_DDR_INTERVAL	((0x800 << SDRAM_INTERVAL_REFINT_SHIFT) |\
				(0x800 << SDRAM_INTERVAL_BSTOPRE_SHIFT))

#define CONFIG_SYS_SDRAM_CFG		(SDRAM_CFG_SREN |\
					 SDRAM_CFG_2T_EN | SDRAM_CFG_HSE |\
					 SDRAM_CFG_DBW_32 |\
					 SDRAM_CFG_SDRAM_TYPE_DDR2)

#define CONFIG_SYS_SDRAM_CFG2		0x00401000
#define CONFIG_SYS_DDR_MODE		((0x0448 << SDRAM_MODE_ESD_SHIFT) |\
					 (0x0242 << SDRAM_MODE_SD_SHIFT))
#define CONFIG_SYS_DDR_MODE_2		0x00000000
#define CONFIG_SYS_DDR_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075
#define CONFIG_SYS_DDRCDR_VALUE	(DDRCDR_EN |\
					 DDRCDR_PZ_NOMZ |\
					 DDRCDR_NZ_NOMZ |\
					 DDRCDR_ODT |\
					 DDRCDR_M_ODR |\
					 DDRCDR_Q_DRN)

/*
 * on-board devices
 */
#define CONFIG_TSEC1
#define CONFIG_TSEC2
#define CONFIG_TSEC_ENET
#define CONFIG_HARD_SPI
#define CONFIG_HARD_I2C

/*
 * NOR FLASH setup
 */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
#define CONFIG_FLASH_SHOW_PROGRESS	50
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

#define CONFIG_SYS_FLASH_BASE		0xFF800000
#define CONFIG_SYS_FLASH_SIZE		8
#define CONFIG_SYS_FLASH_PROTECTION

#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000016

#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE |\
					 BR_PS_8 |\
					 BR_MS_GPCM |\
					 BR_V)

#define CONFIG_SYS_OR0_PRELIM		(MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\
					 OR_GPCM_SCY_10 |\
					 OR_GPCM_EHTR |\
					 OR_GPCM_TRLX |\
					 OR_GPCM_CSNT |\
					 OR_GPCM_EAD)
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	128

#define CONFIG_SYS_FLASH_ERASE_TOUT	60000
#define CONFIG_SYS_FLASH_WRITE_TOUT	500

/*
 * NAND FLASH setup
 */
#define CONFIG_SYS_NAND_BASE		0xE1000000
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_MAX_CHIPS	1
#define CONFIG_NAND_FSL_ELBC
#define CONFIG_SYS_NAND_PAGE_SIZE	(2048)
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
#define NAND_CACHE_PAGES		64

#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
#define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000E
#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
#define CONFIG_SYS_NAND_LBLAWAR_PRELIM	CONFIG_SYS_LBLAWAR1_PRELIM

#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_NAND_BASE) |\
				 (2<<BR_DECC_SHIFT) |\
				 BR_PS_8 |\
				 BR_MS_FCM |\
				 BR_V)

#define CONFIG_SYS_OR1_PRELIM	(0xFFFF8000 |\
				 OR_FCM_PGS |\
				 OR_FCM_CSCT |\
				 OR_FCM_CST |\
				 OR_FCM_CHT |\
				 OR_FCM_SCY_4 |\
				 OR_FCM_TRLX |\
				 OR_FCM_EHTR |\
				 OR_FCM_RST)

/*
 * MRAM setup
 */
#define CONFIG_SYS_MRAM_BASE		0xE2000000
#define CONFIG_SYS_MRAM_SIZE		0x20000	/* 128 Kb */
#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_MRAM_BASE
#define CONFIG_SYS_LBLAWAR2_PRELIM	0x80000010	/* 128 Kb  */

#define CONFIG_SYS_OR_TIMING_MRAM

#define CONFIG_SYS_BR2_PRELIM		(CONFIG_SYS_MRAM_BASE |\
					 BR_PS_8 |\
					 BR_MS_GPCM |\
					 BR_V)

#define CONFIG_SYS_OR2_PRELIM		0xFFFE0C74

/*
 * CPLD setup
 */
#define CONFIG_SYS_CPLD_BASE		0xE3000000
#define CONFIG_SYS_CPLD_SIZE		0x8000
#define CONFIG_SYS_LBLAWBAR3_PRELIM	CONFIG_SYS_CPLD_BASE
#define CONFIG_SYS_LBLAWAR3_PRELIM	0x8000000E

#define CONFIG_SYS_OR_TIMING_MRAM

#define CONFIG_SYS_BR3_PRELIM		(CONFIG_SYS_CPLD_BASE |\
					 BR_PS_8 |\
					 BR_MS_GPCM |\
					 BR_V)

#define CONFIG_SYS_OR3_PRELIM		0xFFFF8814

/*
 * HW-Watchdog
 */
#define CONFIG_WATCHDOG		1
#define CONFIG_SYS_WATCHDOG_VALUE	0xFFFF

/*
 * I2C setup
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED	400000
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x3100
#define CONFIG_RTC_PCF8563
#define CONFIG_SYS_I2C_RTC_ADDR	0x51

/*
 * SPI setup
 */
#ifdef CONFIG_HARD_SPI
#define CONFIG_MPC8XXX_SPI
#define CONFIG_SYS_GPIO1_PRELIM
#define CONFIG_SYS_GPIO1_DIR		0x00000001
#define CONFIG_SYS_GPIO1_DAT		0x00000001
#endif

/*
 * Ethernet setup
 */
#ifdef CONFIG_TSEC1
#define CONFIG_HAS_ETH0
#define CONFIG_TSEC1_NAME		"TSEC0"
#define CONFIG_SYS_TSEC1_OFFSET	0x24000
#define TSEC1_PHY_ADDR			0x1
#define TSEC1_FLAGS			TSEC_GIGABIT
#define TSEC1_PHYIDX			0
#endif

#ifdef CONFIG_TSEC2
#define CONFIG_HAS_ETH1
#define CONFIG_TSEC2_NAME		"TSEC1"
#define CONFIG_SYS_TSEC2_OFFSET	0x25000
#define TSEC2_PHY_ADDR			0x3
#define TSEC2_FLAGS			TSEC_GIGABIT
#define TSEC2_PHYIDX			0
#endif
#define CONFIG_ETHPRIME		"TSEC1"

/*
 * Serial Port
 */
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1

#define CONFIG_SYS_BAUDRATE_TABLE	\
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR + 0x4500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR + 0x4600)
#define CONFIG_SYS_NS16550_CLK		(CONFIG_83XX_CLKIN * 2)

#define CONFIG_HAS_FSL_DR_USB
#define CONFIG_SYS_SCCR_USBDRCM	3

/*
 * BAT's
 */
#define CONFIG_HIGH_BATS

/* DDR @ 0x00000000 */
#define CONFIG_SYS_IBAT0L		(CONFIG_SYS_SDRAM_BASE |\
					 BATL_PP_10)
#define CONFIG_SYS_IBAT0U		(CONFIG_SYS_SDRAM_BASE |\
					 BATU_BL_256M |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT0L		CONFIG_SYS_IBAT0L
#define CONFIG_SYS_DBAT0U		CONFIG_SYS_IBAT0U

/* Initial RAM @ 0xFD000000 */
#define CONFIG_SYS_IBAT1L		(CONFIG_SYS_INIT_RAM_ADDR |\
					 BATL_PP_10 |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT1U		(CONFIG_SYS_INIT_RAM_ADDR |\
					 BATU_BL_256K |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT1L		CONFIG_SYS_IBAT1L
#define CONFIG_SYS_DBAT1U		CONFIG_SYS_IBAT1U

/* FLASH @ 0xFF800000 */
#define CONFIG_SYS_IBAT2L		(CONFIG_SYS_FLASH_BASE |\
					 BATL_PP_10 |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT2U		(CONFIG_SYS_FLASH_BASE |\
					 BATU_BL_8M |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT2L		(CONFIG_SYS_FLASH_BASE |\
					 BATL_PP_10 |\
					 BATL_CACHEINHIBIT |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT2U		CONFIG_SYS_IBAT2U

#define CONFIG_SYS_IBAT3L		(0)
#define CONFIG_SYS_IBAT3U		(0)
#define CONFIG_SYS_DBAT3L		CONFIG_SYS_IBAT3L
#define CONFIG_SYS_DBAT3U		CONFIG_SYS_IBAT3U

#define CONFIG_SYS_IBAT4L		(0)
#define CONFIG_SYS_IBAT4U		(0)
#define CONFIG_SYS_DBAT4L		CONFIG_SYS_IBAT4L
#define CONFIG_SYS_DBAT4U		CONFIG_SYS_IBAT4U

/* IMMRBAR @ 0xF0000000 */
#define CONFIG_SYS_IBAT5L		(CONFIG_SYS_IMMR |\
					 BATL_PP_10 |\
					 BATL_CACHEINHIBIT |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT5U		(CONFIG_SYS_IMMR |\
					 BATU_BL_128M |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT5L		CONFIG_SYS_IBAT5L
#define CONFIG_SYS_DBAT5U		CONFIG_SYS_IBAT5U

/* NAND-Flash @ 0xE1000000, MRAM @ 0xE2000000, CPLD @ 0xE3000000 */
#define CONFIG_SYS_IBAT6L		(0xE0000000 |\
					 BATL_PP_10 |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT6U		(0xE0000000 |\
					 BATU_BL_256M |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT6L		CONFIG_SYS_IBAT6L
#define CONFIG_SYS_DBAT6U		CONFIG_SYS_IBAT6U

#define CONFIG_SYS_IBAT7L		(0)
#define CONFIG_SYS_IBAT7U		(0)
#define CONFIG_SYS_DBAT7L		CONFIG_SYS_IBAT7L
#define CONFIG_SYS_DBAT7U		CONFIG_SYS_IBAT7U

/*
 * U-Boot environment setup
 */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_DATE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_CMD_JFFS2
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE

/*
 * The reserved memory
 */
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(8 * 1024 * 1024)

/*
 * Environment Configuration
 */
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE \
				+ CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SIZE		0x20000
#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)

#define CONFIG_NETDEV			eth1
#define CONFIG_HOSTNAME		ids8313
#define CONFIG_ROOTPATH		"/opt/eldk-4.2/ppc_6xx"
#define CONFIG_BOOTFILE		"ids8313/uImage"
#define CONFIG_UBOOTPATH		"ids8313/u-boot.bin"
#define CONFIG_FDTFILE			"ids8313/ids8313.dtb"
#define CONFIG_LOADADDR		0x400000
#define CONFIG_CMD_ENV_FLAGS
#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"

#define CONFIG_BAUDRATE		115200

/* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE		1024
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
					 + sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START	0x00001000
#define CONFIG_SYS_MEMTEST_END		0x00C00000

#define CONFIG_SYS_LOAD_ADDR		0x100000
#define CONFIG_MII
#define CONFIG_LOADS_ECHO
#define CONFIG_TIMESTAMP
#define CONFIG_PREBOOT			"echo;" \
					"echo Type \\\"run nfsboot\\\" " \
					"to mount root filesystem over NFS;echo"
#undef	CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND		"run boot_cramfs"
#undef	CONFIG_SYS_LOADS_BAUD_CHANGE

#define CONFIG_JFFS2_NAND
#define CONFIG_JFFS2_DEV		"0"

/* mtdparts command line support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_FLASH_CFI_MTD
#define CONFIG_MTD_DEVICE
#define MTDIDS_DEFAULT		"nor0=ff800000.flash,nand0=e1000000.flash"
#define MTDPARTS_DEFAULT	"mtdparts=ff800000.flash:7m(dum)," \
					"768k(BOOT-BIN)," \
					"128k(BOOT-ENV),128k(BOOT-REDENV);" \
					"e1000000.flash:-(ubi)"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"netdev=" __stringify(CONFIG_NETDEV) "\0"			\
	"ethprime=TSEC1\0"						\
	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
	"tftpflash=tftpboot ${loadaddr} ${uboot}; "			\
		"protect off " __stringify(CONFIG_SYS_TEXT_BASE)	\
		" +${filesize}; "					\
		"erase " __stringify(CONFIG_SYS_TEXT_BASE)		\
		" +${filesize}; "					\
		"cp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE)	\
		" ${filesize}; "					\
		"protect on " __stringify(CONFIG_SYS_TEXT_BASE)		\
		" +${filesize}; "					\
		"cmp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE)	\
		" ${filesize}\0"					\
	"console=ttyS0\0"						\
	"fdtaddr=0x780000\0"						\
	"kernel_addr=ff800000\0"					\
	"fdtfile=" __stringify(CONFIG_FDTFILE) "\0"			\
	"setbootargs=setenv bootargs "					\
		"root=${rootdev} rw console=${console},"		\
			"${baudrate} ${othbootargs}\0"			\
	"setipargs=setenv bootargs root=${rootdev} rw "			\
			"nfsroot=${serverip}:${rootpath} "		\
			"ip=${ipaddr}:${serverip}:${gatewayip}:"	\
			"${netmask}:${hostname}:${netdev}:off "		\
			"console=${console},${baudrate} ${othbootargs}\0" \
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"mtdids=" MTDIDS_DEFAULT "\0"					\
	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
	"\0"

#define CONFIG_NFSBOOTCOMMAND						\
	"setenv rootdev /dev/nfs;"					\
	"run setipargs;run addmtd;"					\
	"tftp ${loadaddr} ${bootfile};"				\
	"tftp ${fdtaddr} ${fdtfile};"					\
	"fdt addr ${fdtaddr};"						\
	"bootm ${loadaddr} - ${fdtaddr}"

/* UBI Support */
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_MTD_PARTITIONS

/* bootcount support */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_I2C
#define CONFIG_BOOTCOUNT_ALEN	1
#define CONFIG_SYS_BOOTCOUNT_ADDR	0x9

#define CONFIG_IMAGE_FORMAT_LEGACY
#define CONFIG_CMD_HASH
#define CONFIG_SHA1
#define CONFIG_SHA256

#endif	/* __CONFIG_H */
Commit	Line	Data
eaf8c986 HS	1	/*
	2	* (C) Copyright 2013
	3	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	4	*
	5	* Based on:
	6	* Copyright (c) 2011 IDS GmbH, Germany
	7	* Sergej Stepanov <ste@ids.de>
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
	15	/*
	16	* High Level Configuration Options
	17	*/
	18	#define CONFIG_MPC831x
	19	#define CONFIG_MPC8313
	20	#define CONFIG_IDS8313
	21
	22	#define CONFIG_FSL_ELBC
	23
	24	#define CONFIG_MISC_INIT_R
	25
eaf8c986 HS	26	#define CONFIG_BOOT_RETRY_TIME 900
eaf8c986 HS	27	#define CONFIG_BOOT_RETRY_MIN 30
eaf8c986 HS	28	#define CONFIG_RESET_TO_RETRY
	29
	30	#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
	31	#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
	32
	33	#define CONFIG_SYS_IMMR 0xF0000000
	34
	35	#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
	36	#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
	37
	38	/*
	39	* Hardware Reset Configuration Word
	40	* if CLKIN is 66.000MHz, then
	41	* CSB = 132MHz, CORE = 264MHz, DDRC = 264MHz, LBC = 132MHz
	42	*/
	43	#define CONFIG_SYS_HRCW_LOW (0x20000000 /* reserved, must be set */ \|\
	44	HRCWL_DDR_TO_SCB_CLK_2X1 \|\
	45	HRCWL_CSB_TO_CLKIN_2X1 \|\
	46	HRCWL_CORE_TO_CSB_2X1)
	47
	48	#define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST \|\
	49	HRCWH_CORE_ENABLE \|\
	50	HRCWH_FROM_0XFFF00100 \|\
	51	HRCWH_BOOTSEQ_DISABLE \|\
	52	HRCWH_SW_WATCHDOG_DISABLE \|\
	53	HRCWH_ROM_LOC_LOCAL_8BIT \|\
	54	HRCWH_RL_EXT_LEGACY \|\
	55	HRCWH_TSEC1M_IN_MII \|\
	56	HRCWH_TSEC2M_IN_MII \|\
	57	HRCWH_BIG_ENDIAN)
	58
	59	#define CONFIG_SYS_SICRH 0x00000000
	60	#define CONFIG_SYS_SICRL (SICRL_LBC \| SICRL_SPI_D)
	61
	62	#define CONFIG_HWCONFIG
	63
	64	#define CONFIG_SYS_HID0_INIT 0x000000000
	65	#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \|\
	66	HID0_ENABLE_INSTRUCTION_CACHE \|\
	67	HID0_DISABLE_DYNAMIC_POWER_MANAGMENT)
	68
	69	#define CONFIG_SYS_HID2 (HID2_HBE \| 0x00020000)
	70
	71	/*
	72	* Definitions for initial stack pointer and data area (in DCACHE )
	73	*/
	74	#define CONFIG_SYS_INIT_RAM_LOCK
	75	#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000
	76	#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in DPRAM */
	77	#define CONFIG_SYS_GBL_DATA_SIZE 0x100
	78	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
	79	- CONFIG_SYS_GBL_DATA_SIZE)
	80	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	81
	82	/*
	83	* Local Bus LCRR and LBCR regs
	84	*/
	85	#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1
	86	#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
	87	#define CONFIG_SYS_LBC_LBCR (0x00040000 \|\
	88	(0xFF << LBCR_BMT_SHIFT) \|\
	89	0xF)
	90
	91	#define CONFIG_SYS_LBC_MRTPR 0x20000000
92
93	/*
94	* Internal Definitions
95	*/
96	/*
97	* DDR Setup
98	*/
99	#define CONFIG_SYS_DDR_BASE 0x00000000
100	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
101	#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
102
103	/*
104	* Manually set up DDR parameters,
105	* as this board has not the SPD connected to I2C.
106	*/
107	#define CONFIG_SYS_DDR_SIZE 256 /* MB */
108	#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN \|\
109	0x00010000 \|\
110	CSCONFIG_ROW_BIT_13 \|\
111	CSCONFIG_COL_BIT_10)
112
113	#define CONFIG_SYS_DDR_CONFIG_256 (CONFIG_SYS_DDR_CONFIG \| \
114	CSCONFIG_BANK_BIT_3)
115
116	#define CONFIG_SYS_DDR_TIMING_3 (1 << 16) /* ext refrec */
117	#define CONFIG_SYS_DDR_TIMING_0 ((3 << TIMING_CFG0_RWT_SHIFT) \|\
118	(3 << TIMING_CFG0_WRT_SHIFT) \|\
119	(3 << TIMING_CFG0_RRT_SHIFT) \|\
120	(3 << TIMING_CFG0_WWT_SHIFT) \|\
121	(6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \|\
122	(2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \|\
123	(8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \| \
124	(2 << TIMING_CFG0_MRS_CYC_SHIFT))
125	#define CONFIG_SYS_DDR_TIMING_1 ((4 << TIMING_CFG1_PRETOACT_SHIFT) \|\
126	(12 << TIMING_CFG1_ACTTOPRE_SHIFT) \|\
127	(4 << TIMING_CFG1_ACTTORW_SHIFT) \|\
128	(7 << TIMING_CFG1_CASLAT_SHIFT) \|\
129	(4 << TIMING_CFG1_REFREC_SHIFT) \|\
130	(4 << TIMING_CFG1_WRREC_SHIFT) \|\
131	(2 << TIMING_CFG1_ACTTOACT_SHIFT) \|\
132	(2 << TIMING_CFG1_WRTORD_SHIFT))
133	#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \|\
134	(5 << TIMING_CFG2_CPO_SHIFT) \|\
135	(4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \|\
136	(2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \|\
137	(0 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \|\
138	(1 << TIMING_CFG2_CKE_PLS_SHIFT) \|\
139	(6 << TIMING_CFG2_FOUR_ACT_SHIFT))
140
141	#define CONFIG_SYS_DDR_INTERVAL ((0x800 << SDRAM_INTERVAL_REFINT_SHIFT) \|\
142	(0x800 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
143
144	#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \|\
145	SDRAM_CFG_2T_EN \| SDRAM_CFG_HSE \|\
146	SDRAM_CFG_DBW_32 \|\
147	SDRAM_CFG_SDRAM_TYPE_DDR2)
148
149	#define CONFIG_SYS_SDRAM_CFG2 0x00401000
150	#define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) \|\
151	(0x0242 << SDRAM_MODE_SD_SHIFT))
152	#define CONFIG_SYS_DDR_MODE_2 0x00000000
153	#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075
154	#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \|\
155	DDRCDR_PZ_NOMZ \|\
156	DDRCDR_NZ_NOMZ \|\
157	DDRCDR_ODT \|\
158	DDRCDR_M_ODR \|\
159	DDRCDR_Q_DRN)
160
161	/*
162	* on-board devices
163	*/
164	#define CONFIG_TSEC1
165	#define CONFIG_TSEC2
166	#define CONFIG_TSEC_ENET
eaf8c986 HS	167	#define CONFIG_HARD_SPI
	168	#define CONFIG_HARD_I2C
	169
	170	/*
	171	* NOR FLASH setup
	172	*/
	173	#define CONFIG_SYS_FLASH_CFI
	174	#define CONFIG_FLASH_CFI_DRIVER
	175	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
	176	#define CONFIG_FLASH_SHOW_PROGRESS 50
	177	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	178
	179	#define CONFIG_SYS_FLASH_BASE 0xFF800000
	180	#define CONFIG_SYS_FLASH_SIZE 8
	181	#define CONFIG_SYS_FLASH_PROTECTION
	182
	183	#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
	184	#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016
	185
	186	#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \|\
	187	BR_PS_8 \|\
	188	BR_MS_GPCM \|\
	189	BR_V)
	190
	191	#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \|\
	192	OR_GPCM_SCY_10 \|\
	193	OR_GPCM_EHTR \|\
	194	OR_GPCM_TRLX \|\
	195	OR_GPCM_CSNT \|\
	196	OR_GPCM_EAD)
	197	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	198	#define CONFIG_SYS_MAX_FLASH_SECT 128
	199
	200	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000
	201	#define CONFIG_SYS_FLASH_WRITE_TOUT 500
	202
	203	/*
	204	* NAND FLASH setup
	205	*/
	206	#define CONFIG_SYS_NAND_BASE 0xE1000000
	207	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	208	#define CONFIG_SYS_NAND_MAX_CHIPS 1
eaf8c986 HS	209	#define CONFIG_NAND_FSL_ELBC
	210	#define CONFIG_SYS_NAND_PAGE_SIZE (2048)
	211	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10)
	212	#define NAND_CACHE_PAGES 64
	213
	214	#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
	215	#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E
	216	#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
	217	#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
	218
	219	#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_NAND_BASE) \|\
	220	(2<<BR_DECC_SHIFT) \|\
	221	BR_PS_8 \|\
	222	BR_MS_FCM \|\
	223	BR_V)
	224
	225	#define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 \|\
	226	OR_FCM_PGS \|\
	227	OR_FCM_CSCT \|\
	228	OR_FCM_CST \|\
	229	OR_FCM_CHT \|\
	230	OR_FCM_SCY_4 \|\
	231	OR_FCM_TRLX \|\
	232	OR_FCM_EHTR \|\
	233	OR_FCM_RST)
	234
	235	/*
	236	* MRAM setup
	237	*/
	238	#define CONFIG_SYS_MRAM_BASE 0xE2000000
	239	#define CONFIG_SYS_MRAM_SIZE 0x20000 /* 128 Kb */
	240	#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_MRAM_BASE
	241	#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010 /* 128 Kb */
	242
	243	#define CONFIG_SYS_OR_TIMING_MRAM
	244
	245	#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_MRAM_BASE \|\
	246	BR_PS_8 \|\
	247	BR_MS_GPCM \|\
	248	BR_V)
	249
	250	#define CONFIG_SYS_OR2_PRELIM 0xFFFE0C74
	251
	252	/*
	253	* CPLD setup
	254	*/
	255	#define CONFIG_SYS_CPLD_BASE 0xE3000000
	256	#define CONFIG_SYS_CPLD_SIZE 0x8000
	257	#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CPLD_BASE
	258	#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000E
	259
	260	#define CONFIG_SYS_OR_TIMING_MRAM
	261
	262	#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CPLD_BASE \|\
	263	BR_PS_8 \|\
	264	BR_MS_GPCM \|\
	265	BR_V)
	266
	267	#define CONFIG_SYS_OR3_PRELIM 0xFFFF8814
	268
	269	/*
	270	* HW-Watchdog
	271	*/
	272	#define CONFIG_WATCHDOG 1
273	#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF
274
275	/*
276	* I2C setup
277	*/
eaf8c986 HS	278	#define CONFIG_SYS_I2C
	279	#define CONFIG_SYS_I2C_FSL
	280	#define CONFIG_SYS_FSL_I2C_SPEED 400000
	281	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	282	#define CONFIG_SYS_FSL_I2C_OFFSET 0x3100
	283	#define CONFIG_RTC_PCF8563
	284	#define CONFIG_SYS_I2C_RTC_ADDR 0x51
	285
	286	/*
	287	* SPI setup
	288	*/
	289	#ifdef CONFIG_HARD_SPI
	290	#define CONFIG_MPC8XXX_SPI
eaf8c986 HS	291	#define CONFIG_SYS_GPIO1_PRELIM
	292	#define CONFIG_SYS_GPIO1_DIR 0x00000001
	293	#define CONFIG_SYS_GPIO1_DAT 0x00000001
	294	#endif
	295
	296	/*
	297	* Ethernet setup
	298	*/
	299	#ifdef CONFIG_TSEC1
	300	#define CONFIG_HAS_ETH0
	301	#define CONFIG_TSEC1_NAME "TSEC0"
	302	#define CONFIG_SYS_TSEC1_OFFSET 0x24000
	303	#define TSEC1_PHY_ADDR 0x1
	304	#define TSEC1_FLAGS TSEC_GIGABIT
	305	#define TSEC1_PHYIDX 0
	306	#endif
	307
	308	#ifdef CONFIG_TSEC2
	309	#define CONFIG_HAS_ETH1
	310	#define CONFIG_TSEC2_NAME "TSEC1"
	311	#define CONFIG_SYS_TSEC2_OFFSET 0x25000
	312	#define TSEC2_PHY_ADDR 0x3
	313	#define TSEC2_FLAGS TSEC_GIGABIT
	314	#define TSEC2_PHYIDX 0
	315	#endif
	316	#define CONFIG_ETHPRIME "TSEC1"
	317
	318	/*
	319	* Serial Port
	320	*/
	321	#define CONFIG_CONS_INDEX 1
eaf8c986 HS	322	#define CONFIG_SYS_NS16550_SERIAL
	323	#define CONFIG_SYS_NS16550_REG_SIZE 1
	324
	325	#define CONFIG_SYS_BAUDRATE_TABLE \
	326	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
	327	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
	328	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
	329	#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
	330
	331	#define CONFIG_HAS_FSL_DR_USB
	332	#define CONFIG_SYS_SCCR_USBDRCM 3
	333
	334	/*
	335	* BAT's
	336	*/
	337	#define CONFIG_HIGH_BATS
	338
	339	/* DDR @ 0x00000000 */
	340	#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \|\
	341	BATL_PP_10)
	342	#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \|\
	343	BATU_BL_256M \|\
	344	BATU_VS \|\
	345	BATU_VP)
	346	#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
	347	#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
	348
	349	/* Initial RAM @ 0xFD000000 */
	350	#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR \|\
	351	BATL_PP_10 \|\
	352	BATL_GUARDEDSTORAGE)
	353	#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR \|\
	354	BATU_BL_256K \|\
	355	BATU_VS \|\
	356	BATU_VP)
	357	#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
	358	#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
	359
	360	/* FLASH @ 0xFF800000 */
	361	#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE \|\
	362	BATL_PP_10 \|\
	363	BATL_GUARDEDSTORAGE)
	364	#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE \|\
	365	BATU_BL_8M \|\
	366	BATU_VS \|\
	367	BATU_VP)
	368	#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE \|\
	369	BATL_PP_10 \|\
	370	BATL_CACHEINHIBIT \|\
	371	BATL_GUARDEDSTORAGE)
	372	#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
	373
	374	#define CONFIG_SYS_IBAT3L (0)
	375	#define CONFIG_SYS_IBAT3U (0)
	376	#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
	377	#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
	378
	379	#define CONFIG_SYS_IBAT4L (0)
	380	#define CONFIG_SYS_IBAT4U (0)
	381	#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
	382	#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
	383
	384	/* IMMRBAR @ 0xF0000000 */
	385	#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \|\
386	BATL_PP_10 \|\
387	BATL_CACHEINHIBIT \|\
388	BATL_GUARDEDSTORAGE)
389	#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \|\
390	BATU_BL_128M \|\
391	BATU_VS \|\
392	BATU_VP)
393	#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
394	#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
395
396	/* NAND-Flash @ 0xE1000000, MRAM @ 0xE2000000, CPLD @ 0xE3000000 */
397	#define CONFIG_SYS_IBAT6L (0xE0000000 \|\
398	BATL_PP_10 \|\
399	BATL_GUARDEDSTORAGE)
400	#define CONFIG_SYS_IBAT6U (0xE0000000 \|\
401	BATU_BL_256M \|\
402	BATU_VS \|\
403	BATU_VP)
404	#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
405	#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
406
407	#define CONFIG_SYS_IBAT7L (0)
408	#define CONFIG_SYS_IBAT7U (0)
409	#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
410	#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
411
412	/*
413	* U-Boot environment setup
414	*/
eaf8c986	415	#define CONFIG_CMD_NAND
eaf8c986 HS	416	#define CONFIG_CMD_DATE
eaf8c986 HS	417	#define CONFIG_CMDLINE_EDITING
eaf8c986 HS	418	#define CONFIG_CMD_JFFS2
	419	#define CONFIG_BOOTP_SUBNETMASK
	420	#define CONFIG_BOOTP_GATEWAY
	421	#define CONFIG_BOOTP_HOSTNAME
	422	#define CONFIG_BOOTP_BOOTPATH
	423	#define CONFIG_BOOTP_BOOTFILESIZE
eaf8c986 HS	424
	425	/*
	426	* The reserved memory
	427	*/
	428	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	429	#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
	430	#define CONFIG_SYS_MALLOC_LEN (8 * 1024 * 1024)
	431
	432	/*
	433	* Environment Configuration
	434	*/
	435	#define CONFIG_ENV_IS_IN_FLASH
	436	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \
	437	+ CONFIG_SYS_MONITOR_LEN)
	438	#define CONFIG_ENV_SIZE 0x20000
	439	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
	440	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
	441
eaf8c986 HS	442	#define CONFIG_NETDEV eth1
	443	#define CONFIG_HOSTNAME ids8313
	444	#define CONFIG_ROOTPATH "/opt/eldk-4.2/ppc_6xx"
	445	#define CONFIG_BOOTFILE "ids8313/uImage"
	446	#define CONFIG_UBOOTPATH "ids8313/u-boot.bin"
	447	#define CONFIG_FDTFILE "ids8313/ids8313.dtb"
	448	#define CONFIG_LOADADDR 0x400000
	449	#define CONFIG_CMD_ENV_FLAGS
	450	#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"
	451
	452	#define CONFIG_BAUDRATE 115200
eaf8c986 HS	453
	454	/* Initial Memory map for Linux*/
	455	#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
	456
	457	/*
	458	* Miscellaneous configurable options
	459	*/
	460	#define CONFIG_SYS_LONGHELP
eaf8c986 HS	461	#define CONFIG_SYS_CBSIZE 1024
	462	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
	463	+ sizeof(CONFIG_SYS_PROMPT)+16)
	464	#define CONFIG_SYS_MAXARGS 16
	465	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
eaf8c986 HS	466
	467	#define CONFIG_SYS_MEMTEST_START 0x00001000
	468	#define CONFIG_SYS_MEMTEST_END 0x00C00000
	469
	470	#define CONFIG_SYS_LOAD_ADDR 0x100000
	471	#define CONFIG_MII
	472	#define CONFIG_LOADS_ECHO
	473	#define CONFIG_TIMESTAMP
	474	#define CONFIG_PREBOOT "echo;" \
	475	"echo Type \\\"run nfsboot\\\" " \
	476	"to mount root filesystem over NFS;echo"
	477	#undef CONFIG_BOOTARGS
	478	#define CONFIG_BOOTCOMMAND "run boot_cramfs"
	479	#undef CONFIG_SYS_LOADS_BAUD_CHANGE
	480
	481	#define CONFIG_JFFS2_NAND
	482	#define CONFIG_JFFS2_DEV "0"
	483
	484	/* mtdparts command line support */
	485	#define CONFIG_CMD_MTDPARTS
	486	#define CONFIG_FLASH_CFI_MTD
	487	#define CONFIG_MTD_DEVICE
	488	#define MTDIDS_DEFAULT "nor0=ff800000.flash,nand0=e1000000.flash"
	489	#define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:7m(dum)," \
	490	"768k(BOOT-BIN)," \
	491	"128k(BOOT-ENV),128k(BOOT-REDENV);" \
	492	"e1000000.flash:-(ubi)"
	493
	494	#define CONFIG_EXTRA_ENV_SETTINGS \
	495	"netdev=" __stringify(CONFIG_NETDEV) "\0" \
	496	"ethprime=TSEC1\0" \
	497	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
	498	"tftpflash=tftpboot ${loadaddr} ${uboot}; " \
	499	"protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
	500	" +${filesize}; " \
	501	"erase " __stringify(CONFIG_SYS_TEXT_BASE) \
	502	" +${filesize}; " \
	503	"cp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE) \
	504	" ${filesize}; " \
	505	"protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
	506	" +${filesize}; " \
	507	"cmp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE) \
	508	" ${filesize}\0" \
	509	"console=ttyS0\0" \
	510	"fdtaddr=0x780000\0" \
	511	"kernel_addr=ff800000\0" \
	512	"fdtfile=" __stringify(CONFIG_FDTFILE) "\0" \
	513	"setbootargs=setenv bootargs " \
	514	"root=${rootdev} rw console=${console}," \
	515	"${baudrate} ${othbootargs}\0" \
	516	"setipargs=setenv bootargs root=${rootdev} rw " \
	517	"nfsroot=${serverip}:${rootpath} " \
	518	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	519	"${netmask}:${hostname}:${netdev}:off " \
	520	"console=${console},${baudrate} ${othbootargs}\0" \
	521	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	522	"mtdids=" MTDIDS_DEFAULT "\0" \
	523	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	524	"\0"
	525
	526	#define CONFIG_NFSBOOTCOMMAND \
	527	"setenv rootdev /dev/nfs;" \
	528	"run setipargs;run addmtd;" \
	529	"tftp ${loadaddr} ${bootfile};" \
530	"tftp ${fdtaddr} ${fdtfile};" \
531	"fdt addr ${fdtaddr};" \
532	"bootm ${loadaddr} - ${fdtaddr}"
533
534	/* UBI Support */
535	#define CONFIG_CMD_NAND_TRIMFFS
eaf8c986 HS	536	#define CONFIG_CMD_UBIFS
	537	#define CONFIG_RBTREE
	538	#define CONFIG_LZO
	539	#define CONFIG_MTD_PARTITIONS
	540
	541	/* bootcount support */
	542	#define CONFIG_BOOTCOUNT_LIMIT
	543	#define CONFIG_BOOTCOUNT_I2C
	544	#define CONFIG_BOOTCOUNT_ALEN 1
	545	#define CONFIG_SYS_BOOTCOUNT_ADDR 0x9
	546
d835e91d	547	#define CONFIG_IMAGE_FORMAT_LEGACY
eaf8c986	548	#define CONFIG_CMD_HASH
eaf8c986 HS	549	#define CONFIG_SHA1
eaf8c986 HS	550	#define CONFIG_SHA256
eaf8c986 HS	551
eaf8c986 HS	552	#endif /* __CONFIG_H */