projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 88c307d1 TH |
1 | /* |
| 2 | * Copyright (C) 2014 Gateworks Corporation | |
| 3 | * Author: Tim Harvey <tharvey@gateworks.com> | |
| 4 | * | |
| 5 | * SPDX-License-Identifier: GPL-2.0+ | |
| 6 | */ | |
| 7 | #ifndef __IMX6_SPL_CONFIG_H | |
| 8 | #define __IMX6_SPL_CONFIG_H | |
| 9 | ||
| 10 | #ifdef CONFIG_SPL | |
| 11 | ||
| 12 | #define CONFIG_SPL_FRAMEWORK | |
| 13 | ||
| 14 | /* | |
| 15 | * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals: | |
| 16 | * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF | |
| 17 | * - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well | |
| 18 | * - BOOT ROM stack is at 0x0091FFB8 | |
| 19 | * - if icache/dcache is enabled (eFuse/strapping controlled) then the | |
| 20 | * IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to | |
| 21 | * fit between 0x00907000 and 0x00918000. | |
| 22 | * - Additionally the BOOT ROM loads what they consider the firmware image | |
| 23 | * which consists of a 4K header in front of us that contains the IVT, DCD | |
| 24 | * and some padding thus 'our' max size is really 0x00908000 - 0x00918000 | |
| 25 | * or 64KB | |
| 26 | */ | |
| 0351ef97 | 27 | #define CONFIG_SYS_THUMB_BUILD |
| 983e3700 | 28 | #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" |
| 88c307d1 | 29 | #define CONFIG_SPL_TEXT_BASE 0x00908000 |
| f91c09ac | 30 | #define CONFIG_SPL_MAX_SIZE 0x10000 |
| 88c307d1 | 31 | #define CONFIG_SPL_STACK 0x0091FFB8 |
| 0405092b SA |
32 | /* |
| 33 | * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the | |
| 34 | * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a | |
| 35 | * boot media (given that boot media specific offset is configured properly). | |
| 36 | */ | |
| 37 | #define CONFIG_SPL_PAD_TO 0x11000 | |
| 88c307d1 TH |
38 | |
| 39 | /* NAND support */ | |
| 40 | #if defined(CONFIG_SPL_NAND_SUPPORT) | |
| 41 | #define CONFIG_SPL_NAND_MXS | |
| 88c307d1 TH |
42 | #endif |
| 43 | ||
| 44 | /* MMC support */ | |
| 45 | #if defined(CONFIG_SPL_MMC_SUPPORT) | |
| e2ccdf89 | 46 | #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 |
| 693d4c9f | 47 | #define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */ |
| 29100089 | 48 | #define CONFIG_SPL_ABORT_ON_RAW_IMAGE |
| 88c307d1 TH |
49 | #endif |
| 50 | ||
| 51 | /* SATA support */ | |
| 52 | #if defined(CONFIG_SPL_SATA_SUPPORT) | |
| 53 | #define CONFIG_SPL_SATA_BOOT_DEVICE 0 | |
| 54 | #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1 | |
| 29100089 | 55 | #define CONFIG_SPL_ABORT_ON_RAW_IMAGE |
| 88c307d1 TH |
56 | #endif |
| 57 | ||
| 58 | /* Define the payload for FAT/EXT support */ | |
| 59 | #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT) | |
| 205b4f33 | 60 | #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" |
| 88c307d1 TH |
61 | #endif |
| 62 | ||
| e7d3b21b | 63 | #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6SL) |
| f9e89ffd | 64 | #define CONFIG_SPL_BSS_START_ADDR 0x88200000 |
| fef438d7 | 65 | #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ |
| f9e89ffd | 66 | #define CONFIG_SYS_SPL_MALLOC_START 0x88300000 |
| fef438d7 | 67 | #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ |
| f9e89ffd PF |
68 | #define CONFIG_SYS_TEXT_BASE 0x87800000 |
| 69 | #else | |
| 88c307d1 TH |
70 | #define CONFIG_SPL_BSS_START_ADDR 0x18200000 |
| 71 | #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ | |
| 72 | #define CONFIG_SYS_SPL_MALLOC_START 0x18300000 | |
| fef438d7 | 73 | #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ |
| 88c307d1 TH |
74 | #define CONFIG_SYS_TEXT_BASE 0x17800000 |
| 75 | #endif | |
| f9e89ffd | 76 | #endif |
| 88c307d1 TH |
77 | |
| 78 | #endif |