]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/imx6_spl.h
Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig
[people/ms/u-boot.git] / include / configs / imx6_spl.h
CommitLineData
88c307d1
TH
1/*
2 * Copyright (C) 2014 Gateworks Corporation
3 * Author: Tim Harvey <tharvey@gateworks.com>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7#ifndef __IMX6_SPL_CONFIG_H
8#define __IMX6_SPL_CONFIG_H
9
10#ifdef CONFIG_SPL
11
12#define CONFIG_SPL_FRAMEWORK
13
14/*
15 * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
16 * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
17 * - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
18 * - BOOT ROM stack is at 0x0091FFB8
19 * - if icache/dcache is enabled (eFuse/strapping controlled) then the
20 * IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
21 * fit between 0x00907000 and 0x00918000.
22 * - Additionally the BOOT ROM loads what they consider the firmware image
23 * which consists of a 4K header in front of us that contains the IVT, DCD
24 * and some padding thus 'our' max size is really 0x00908000 - 0x00918000
25 * or 64KB
26 */
0351ef97 27#define CONFIG_SYS_THUMB_BUILD
88c307d1
TH
28#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
29#define CONFIG_SPL_TEXT_BASE 0x00908000
f91c09ac 30#define CONFIG_SPL_MAX_SIZE 0x10000
88c307d1 31#define CONFIG_SPL_STACK 0x0091FFB8
88c307d1 32#define CONFIG_SPL_SERIAL_SUPPORT
ed3fb1fb 33#define CONFIG_SPL_WATCHDOG_SUPPORT
88c307d1
TH
34
35/* NAND support */
36#if defined(CONFIG_SPL_NAND_SUPPORT)
37#define CONFIG_SPL_NAND_MXS
88c307d1
TH
38#endif
39
40/* MMC support */
41#if defined(CONFIG_SPL_MMC_SUPPORT)
42#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 138 /* offset 69KB */
43#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */
e2ccdf89 44#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
88c307d1 45#define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024)
29100089 46#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
88c307d1
TH
47#endif
48
49/* SATA support */
50#if defined(CONFIG_SPL_SATA_SUPPORT)
51#define CONFIG_SPL_SATA_BOOT_DEVICE 0
52#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
29100089 53#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
88c307d1
TH
54#endif
55
56/* Define the payload for FAT/EXT support */
57#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
205b4f33 58#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
88c307d1
TH
59#endif
60
e7d3b21b 61#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6SL)
f9e89ffd 62#define CONFIG_SPL_BSS_START_ADDR 0x88200000
fef438d7 63#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
f9e89ffd 64#define CONFIG_SYS_SPL_MALLOC_START 0x88300000
fef438d7 65#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
f9e89ffd
PF
66#define CONFIG_SYS_TEXT_BASE 0x87800000
67#else
88c307d1
TH
68#define CONFIG_SPL_BSS_START_ADDR 0x18200000
69#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
70#define CONFIG_SYS_SPL_MALLOC_START 0x18300000
fef438d7 71#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
88c307d1
TH
72#define CONFIG_SYS_TEXT_BASE 0x17800000
73#endif
f9e89ffd 74#endif
88c307d1
TH
75
76#endif