[people/ms/u-boot.git] / include / configs / integratorcp.h

/*
 * (C) Copyright 2003
 * Texas Instruments.
 * Kshitij Gupta <kshitij@ti.com>
 * Configuation settings for the TI OMAP Innovator board.
 *
 * (C) Copyright 2004
 * ARM Ltd.
 * Philippe Robin, <philippe.robin@arm.com>
 * Configuration for Compact Integrator board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CFG_MEMTEST_START	0x100000
#define CFG_MEMTEST_END		0x10000000
#define CFG_HZ			1000
#define CFG_HZ_CLOCK		1000000	/* Timer 1 is clocked at 1Mhz */
#define CFG_TIMERBASE		0x13000100

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs  */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_MISC_INIT_R		1	/* call misc_init_r during start up */
/*
 * Size of malloc() pool
 */
#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

/*
 * Hardware drivers
 */
#define CONFIG_DRIVER_SMC91111
#define CONFIG_SMC_USE_32_BIT
#define CONFIG_SMC91111_BASE    0xC8000000
#undef CONFIG_SMC91111_EXT_PHY

/*
 * NS16550 Configuration
 */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK	14745600
#define CONFIG_PL01x_PORTS	{ (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 }
#define CONFIG_CONS_INDEX	0
#define CONFIG_BAUDRATE		38400
#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
#define CFG_SERIAL0		0x16000000
#define CFG_SERIAL1		0x17000000


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#define CONFIG_CMD_BDI
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_IMI
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING


#if 0
#define CONFIG_BOOTDELAY	2
#define CONFIG_BOOTARGS	"root=/dev/nfs nfsroot=<IP address>:/<exported rootfs>  mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
#define CONFIG_BOOTCOMMAND "bootp ; bootm"
#endif
/* The kernel command line & boot command below are for a platform flashed with afu.axf

Image 666 Block  0 End Block  0 address 0x24000000 exec 0x24000000- name u-boot
Image 667 Block  1 End Block 13 address 0x24040000 exec 0x24040000- name u-linux
Image 668 Block 14 End Block 33 address 0x24380000 exec 0x24380000- name rootfs
SIB at Block62 End Block62 address 0x24f80000

*/
#define CONFIG_BOOTDELAY	2
#define CONFIG_BOOTARGS	"root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0 console=ttyAMA0"
#define CONFIG_BOOTCOMMAND "cp 0x24080000 0x7fc0 0x100000; bootm"

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP				/* undef to save memory */
#define CFG_PROMPT	"Integrator-CP # "	/* Monitor Command Prompt */
#define CFG_CBSIZE	256			/* Console I/O Buffer Size*/
/* Print Buffer Size */
#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
#define CFG_MAXARGS	16			/* max number of command args */
#define CFG_BARGSIZE	CFG_CBSIZE		/* Boot Argument Buffer Size*/

#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
#define CFG_LOAD_ADDR	0x7fc0	/* default load address */

/*-----------------------------------------------------------------------
 * Stack sizes
 *
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
#endif

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
#define PHYS_SDRAM_1		0x00000000	/* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE	0x08000000	/* 128 MB */

/*-----------------------------------------------------------------------
 * FLASH and environment organization

 * Top varies according to amount fitted
 * Reserve top 4 blocks of flash
 * - ARM Boot Monitor
 * - Unused
 * - SIB block
 * - U-Boot environment
 *
 * Base is always 0x24000000

 */
#define CFG_FLASH_BASE		0x24000000
#define CFG_MAX_FLASH_SECT	64
#define CFG_MAX_FLASH_BANKS	1		/* max number of memory banks */
#define PHYS_FLASH_SIZE		0x01000000	/* 16MB */
#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ)	/* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ)	/* Timeout for Flash Write */

#define CFG_MONITOR_LEN		0x00100000
#define CFG_ENV_IS_IN_FLASH	(1)

/*
 * Move up the U-Boot & monitor area if more flash is fitted.
 * If this U-Boot is to be run on Integrators with varying flash sizes,
 * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
 * register and dynamically assign CFG_ENV_ADDR & CFG_MONITOR_BASE
 * - CFG_MONITOR_BASE is set to indicate that the environment is not
 * embedded in the boot monitor(s) area
 */
#if ( PHYS_FLASH_SIZE == 0x04000000 )

#define CFG_ENV_ADDR		0x27F00000
#define CFG_MONITOR_BASE	0x27F40000

#elif (PHYS_FLASH_SIZE == 0x02000000 )

#define CFG_ENV_ADDR		0x25F00000
#define CFG_MONITOR_BASE	0x25F40000

#else

#define CFG_ENV_ADDR		0x24F00000
#define CFG_MONITOR_BASE	0x27F40000

#endif

#define CFG_ENV_SECT_SIZE	0x40000		/* 256KB */
#define CFG_ENV_SIZE		8192		/* 8KB */
/*-----------------------------------------------------------------------
 * CP control registers
 */
#define CPCR_BASE		0xCB000000	/* CP Registers*/
#define OS_FLASHPROG		0x00000004	/* Flash register*/
#define CPMASK_EXTRABANK	0x8
#define CPMASK_FLASHSIZE	0x4
#define CPMASK_FLWREN		0x2
#define CPMASK_FLVPPEN		0x1

/*
 * The ARM boot monitor initializes the board.
 * However, the default U-Boot code also performs the initialization.
 * If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT
 * - see documentation supplied with board for details of how to choose the
 * image to run at reset/power up
 * e.g. whether the ARM Boot Monitor runs before U-Boot

#define CONFIG_SKIP_LOWLEVEL_INIT

 */

/*
 * The ARM boot monitor does not relocate U-Boot.
 * However, the default U-Boot code performs the relocation check,
 * and may relocate the code if the memory map is changed.
 * If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT

#define SKIP_CONFIG_RELOCATE_UBOOT

 */
/*-----------------------------------------------------------------------
 * There are various dependencies on the core module (CM) fitted
 * Users should refer to their CM user guide
 * - when porting adjust u-boot/Makefile accordingly
 * to define the necessary CONFIG_ s for the CM involved
 * see e.g. cp_926ejs_config
 */

#include "armcoremodule.h"

/*
 * If CONFIG_SKIP_LOWLEVEL_INIT is not defined &
 * the core module has a CM_INIT register
 * then the U-Boot initialisation code will
 * e.g. ARM Boot Monitor or pre-loader is repeated once
 * (to re-initialise any existing CM_INIT settings to safe values).
 *
 * This is usually not the desired behaviour since the platform
 * will either reboot into the ARM monitor (or pre-loader)
 * or continuously cycle thru it without U-Boot running,
 * depending upon the setting of Integrator/CP switch S2-4.
 *
 * However it may be needed if Integrator/CP switch S2-1
 * is set OFF to boot direct into U-Boot.
 * In that case comment out the line below.
#undef	CONFIG_CM_INIT
 */

#endif /* __CONFIG_H */
Commit	Line	Data
3d3befa7 WD	1	/*
	2	* (C) Copyright 2003
	3	* Texas Instruments.
	4	* Kshitij Gupta <kshitij@ti.com>
	5	* Configuation settings for the TI OMAP Innovator board.
	6	*
	7	* (C) Copyright 2004
	8	* ARM Ltd.
	9	* Philippe Robin, <philippe.robin@arm.com>
	10	* Configuration for Compact Integrator board.
	11	*
	12	* See file CREDITS for list of people who contributed to this
	13	* project.
	14	*
	15	* This program is free software; you can redistribute it and/or
	16	* modify it under the terms of the GNU General Public License as
	17	* published by the Free Software Foundation; either version 2 of
	18	* the License, or (at your option) any later version.
	19	*
	20	* This program is distributed in the hope that it will be useful,
	21	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	22	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	23	* GNU General Public License for more details.
	24	*
	25	* You should have received a copy of the GNU General Public License
	26	* along with this program; if not, write to the Free Software
	27	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	28	* MA 02111-1307 USA
	29	*/
	30
	31	#ifndef __CONFIG_H
	32	#define __CONFIG_H
	33
	34	/*
	35	* High Level Configuration Options
	36	* (easy to change)
	37	*/
74f4304e WD	38	#define CFG_MEMTEST_START 0x100000
	39	#define CFG_MEMTEST_END 0x10000000
	40	#define CFG_HZ 1000
	41	#define CFG_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
	42	#define CFG_TIMERBASE 0x13000100
3d3befa7	43
74f4304e	44	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
3d3befa7	45	#define CONFIG_SETUP_MEMORY_TAGS 1
74f4304e	46	#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
3d3befa7 WD	47	/*
	48	* Size of malloc() pool
	49	*/
5a95f6fb	50	#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
42dfe7a1	51	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
3d3befa7 WD	52
	53	/*
	54	* Hardware drivers
	55	*/
	56	#define CONFIG_DRIVER_SMC91111
	57	#define CONFIG_SMC_USE_32_BIT
	58	#define CONFIG_SMC91111_BASE 0xC8000000
	59	#undef CONFIG_SMC91111_EXT_PHY
	60
	61	/*
	62	* NS16550 Configuration
	63	*/
48d0192f	64	#define CONFIG_PL011_SERIAL
6705d81e WD	65	#define CONFIG_PL011_CLOCK 14745600
6705d81e WD	66	#define CONFIG_PL01x_PORTS { (void )CFG_SERIAL0, (void )CFG_SERIAL1 }
3d3befa7	67	#define CONFIG_CONS_INDEX 0
5a95f6fb	68	#define CONFIG_BAUDRATE 38400
9b880bd4	69	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
3d3befa7 WD	70	#define CFG_SERIAL0 0x16000000
	71	#define CFG_SERIAL1 0x17000000
	72
1d2c6bc4	73
079a136c JL	74	/*
	75	* BOOTP options
	76	*/
	77	#define CONFIG_BOOTP_BOOTFILESIZE
	78	#define CONFIG_BOOTP_BOOTPATH
	79	#define CONFIG_BOOTP_GATEWAY
	80	#define CONFIG_BOOTP_HOSTNAME
	81
	82
5a95f6fb	83	/*
1d2c6bc4 JL	84	* Command line configuration.
	85	*/
	86	#define CONFIG_CMD_BDI
	87	#define CONFIG_CMD_DHCP
	88	#define CONFIG_CMD_ENV
	89	#define CONFIG_CMD_FLASH
	90	#define CONFIG_CMD_IMI
	91	#define CONFIG_CMD_MEMORY
	92	#define CONFIG_CMD_NET
	93	#define CONFIG_CMD_PING
5a95f6fb	94
3d3befa7	95
5a95f6fb	96	#if 0
3d3befa7	97	#define CONFIG_BOOTDELAY 2
9b880bd4	98	#define CONFIG_BOOTARGS "root=/dev/nfs nfsroot=<IP address>:/<exported rootfs> mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
3d3befa7	99	#define CONFIG_BOOTCOMMAND "bootp ; bootm"
5a95f6fb	100	#endif
9b880bd4 WD	101	/* The kernel command line & boot command below are for a platform flashed with afu.axf
	102
	103	Image 666 Block 0 End Block 0 address 0x24000000 exec 0x24000000- name u-boot
	104	Image 667 Block 1 End Block 13 address 0x24040000 exec 0x24040000- name u-linux
	105	Image 668 Block 14 End Block 33 address 0x24380000 exec 0x24380000- name rootfs
	106	SIB at Block62 End Block62 address 0x24f80000
3d3befa7	107
74f4304e WD	108	*/
74f4304e WD	109	#define CONFIG_BOOTDELAY 2
9b880bd4 WD	110	#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0 console=ttyAMA0"
9b880bd4 WD	111	#define CONFIG_BOOTCOMMAND "cp 0x24080000 0x7fc0 0x100000; bootm"
74f4304e	112
3d3befa7 WD	113	/*
	114	* Miscellaneous configurable options
	115	*/
9b880bd4 WD	116	#define CFG_LONGHELP /* undef to save memory */
	117	#define CFG_PROMPT "Integrator-CP # " /* Monitor Command Prompt */
	118	#define CFG_CBSIZE 256 /* Console I/O Buffer Size*/
3d3befa7 WD	119	/* Print Buffer Size */
3d3befa7 WD	120	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
9b880bd4 WD	121	#define CFG_MAXARGS 16 /* max number of command args */
9b880bd4 WD	122	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size*/
3d3befa7 WD	123
	124	#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
	125	#define CFG_LOAD_ADDR 0x7fc0 /* default load address */
	126
	127	/*-----------------------------------------------------------------------
	128	* Stack sizes
	129	*
	130	* The stack sizes are set up in start.S using the settings below
	131	*/
	132	#define CONFIG_STACKSIZE (1281024) / regular stack */
	133	#ifdef CONFIG_USE_IRQ
	134	#define CONFIG_STACKSIZE_IRQ (41024) / IRQ stack */
	135	#define CONFIG_STACKSIZE_FIQ (41024) / FIQ stack */
	136	#endif
	137
	138	/*-----------------------------------------------------------------------
	139	* Physical Memory Map
	140	*/
9b880bd4 WD	141	#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
9b880bd4 WD	142	#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
53677ef1	143	#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
3d3befa7 WD	144
	145	/*-----------------------------------------------------------------------
	146	* FLASH and environment organization
9b880bd4 WD	147
	148	* Top varies according to amount fitted
	149	* Reserve top 4 blocks of flash
	150	* - ARM Boot Monitor
	151	* - Unused
	152	* - SIB block
	153	* - U-Boot environment
	154	*
	155	* Base is always 0x24000000
	156
3d3befa7	157	*/
9b880bd4	158	#define CFG_FLASH_BASE 0x24000000
53677ef1	159	#define CFG_MAX_FLASH_SECT 64
3d3befa7	160	#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
53677ef1	161	#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
74f4304e WD	162	#define CFG_FLASH_ERASE_TOUT (2CFG_HZ) / Timeout for Flash Erase */
74f4304e WD	163	#define CFG_FLASH_WRITE_TOUT (2CFG_HZ) / Timeout for Flash Write */
3d3befa7	164
9b880bd4 WD	165	#define CFG_MONITOR_LEN 0x00100000
	166	#define CFG_ENV_IS_IN_FLASH (1)
	167
	168	/*
	169	* Move up the U-Boot & monitor area if more flash is fitted.
	170	* If this U-Boot is to be run on Integrators with varying flash sizes,
7817cb20	171	* drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
9b880bd4 WD	172	* register and dynamically assign CFG_ENV_ADDR & CFG_MONITOR_BASE
	173	* - CFG_MONITOR_BASE is set to indicate that the environment is not
	174	* embedded in the boot monitor(s) area
	175	*/
	176	#if ( PHYS_FLASH_SIZE == 0x04000000 )
	177
	178	#define CFG_ENV_ADDR 0x27F00000
	179	#define CFG_MONITOR_BASE 0x27F40000
	180
	181	#elif (PHYS_FLASH_SIZE == 0x02000000 )
	182
	183	#define CFG_ENV_ADDR 0x25F00000
	184	#define CFG_MONITOR_BASE 0x25F40000
	185
	186	#else
	187
5a95f6fb	188	#define CFG_ENV_ADDR 0x24F00000
9b880bd4 WD	189	#define CFG_MONITOR_BASE 0x27F40000
	190
	191	#endif
	192
5a95f6fb WD	193	#define CFG_ENV_SECT_SIZE 0x40000 /* 256KB */
5a95f6fb WD	194	#define CFG_ENV_SIZE 8192 /* 8KB */
9b880bd4 WD	195	/*-----------------------------------------------------------------------
	196	* CP control registers
	197	*/
	198	#define CPCR_BASE 0xCB000000 /* CP Registers*/
	199	#define OS_FLASHPROG 0x00000004 /* Flash register*/
	200	#define CPMASK_EXTRABANK 0x8
	201	#define CPMASK_FLASHSIZE 0x4
	202	#define CPMASK_FLWREN 0x2
	203	#define CPMASK_FLVPPEN 0x1
	204
	205	/*
	206	* The ARM boot monitor initializes the board.
	207	* However, the default U-Boot code also performs the initialization.
	208	* If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT
	209	* - see documentation supplied with board for details of how to choose the
	210	* image to run at reset/power up
	211	* e.g. whether the ARM Boot Monitor runs before U-Boot
5a95f6fb	212
9b880bd4 WD	213	#define CONFIG_SKIP_LOWLEVEL_INIT
	214
	215	*/
	216
	217	/*
	218	* The ARM boot monitor does not relocate U-Boot.
	219	* However, the default U-Boot code performs the relocation check,
	220	* and may relocate the code if the memory map is changed.
	221	* If necessary this can be prevented by defining SKIP_RELOCATE_UBOOT
	222
	223	#define SKIP_CONFIG_RELOCATE_UBOOT
	224
	225	*/
74f4304e WD	226	/*-----------------------------------------------------------------------
	227	* There are various dependencies on the core module (CM) fitted
	228	* Users should refer to their CM user guide
	229	* - when porting adjust u-boot/Makefile accordingly
9b880bd4 WD	230	* to define the necessary CONFIG_ s for the CM involved
9b880bd4 WD	231	* see e.g. cp_926ejs_config
74f4304e WD	232	*/
74f4304e WD	233
9b880bd4	234	#include "armcoremodule.h"
74f4304e	235
9b880bd4 WD	236	/*
	237	* If CONFIG_SKIP_LOWLEVEL_INIT is not defined &
	238	* the core module has a CM_INIT register
	239	* then the U-Boot initialisation code will
	240	* e.g. ARM Boot Monitor or pre-loader is repeated once
	241	* (to re-initialise any existing CM_INIT settings to safe values).
	242	*
	243	* This is usually not the desired behaviour since the platform
	244	* will either reboot into the ARM monitor (or pre-loader)
	245	* or continuously cycle thru it without U-Boot running,
	246	* depending upon the setting of Integrator/CP switch S2-4.
	247	*
	248	* However it may be needed if Integrator/CP switch S2-1
	249	* is set OFF to boot direct into U-Boot.
	250	* In that case comment out the line below.
	251	#undef CONFIG_CM_INIT
	252	*/
74f4304e	253
5a95f6fb	254	#endif /* __CONFIG_H */