projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 566806ca | 1 | /* |
| 8a24c07b GE |
2 | * Copyright (c) 2008 Nuovation System Designs, LLC |
| 3 | * Grant Erickson <gerickson@nuovations.com> | |
| 4 | * | |
| 566806ca SR |
5 | * (C) Copyright 2007 |
| 6 | * Stefan Roese, DENX Software Engineering, sr@denx.de. | |
| 7 | * | |
| 3765b3e7 | 8 | * SPDX-License-Identifier: GPL-2.0+ |
| 566806ca SR |
9 | */ |
| 10 | ||
| 11 | /************************************************************************ | |
| 12 | * kilauea.h - configuration for AMCC Kilauea (405EX) | |
| 13 | ***********************************************************************/ | |
| 14 | ||
| 15 | #ifndef __CONFIG_H | |
| 16 | #define __CONFIG_H | |
| 17 | ||
| 18 | /*----------------------------------------------------------------------- | |
| 19 | * High Level Configuration Options | |
| 20 | *----------------------------------------------------------------------*/ | |
| 21 | #define CONFIG_KILAUEA 1 /* Board is Kilauea */ | |
| 566806ca SR |
22 | #define CONFIG_405EX 1 /* Specifc 405EX support*/ |
| 23 | #define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */ | |
| 24 | ||
| 2ae18241 WD |
25 | #ifndef CONFIG_SYS_TEXT_BASE |
| 26 | #define CONFIG_SYS_TEXT_BASE 0xFFFA0000 | |
| 27 | #endif | |
| 28 | ||
| 644362c4 SF |
29 | /* |
| 30 | * CHIP_21 errata - you must set this to match your exact CPU, else your | |
| 31 | * board will not boot. DO NOT enable this unless you have JTAG available | |
| 32 | * for recovery, in the event you get it wrong. | |
| 33 | * | |
| 34 | * Kilauea uses the 405EX, while Haleakala uses the 405EXr. Either board | |
| 35 | * may be equipped for security or not. You must look at the CPU part | |
| 36 | * number to be sure what you have. | |
| 37 | */ | |
| 38 | /* #define CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY */ | |
| 39 | /* #define CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY */ | |
| 40 | /* #define CONFIG_SYS_4xx_CHIP_21_405EXr_NO_SECURITY */ | |
| 41 | /* #define CONFIG_SYS_4xx_CHIP_21_405EXr_SECURITY */ | |
| 42 | ||
| 490f2040 SR |
43 | /* |
| 44 | * Include common defines/options for all AMCC eval boards | |
| 45 | */ | |
| 46 | #define CONFIG_HOSTNAME kilauea | |
| 47 | #include "amcc-common.h" | |
| 48 | ||
| 566806ca SR |
49 | #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ |
| 50 | #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ | |
| 9998b136 | 51 | #define CONFIG_BOARD_TYPES |
| 353f2688 | 52 | #define CONFIG_BOARD_EMAC_COUNT |
| 566806ca SR |
53 | |
| 54 | /*----------------------------------------------------------------------- | |
| 55 | * Base addresses -- Note these are effective addresses where the | |
| 56 | * actual resources get mapped (not physical addresses) | |
| 57 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf JCPV |
58 | #define CONFIG_SYS_FLASH_BASE 0xFC000000 |
| 59 | #define CONFIG_SYS_NAND_ADDR 0xF8000000 | |
| 60 | #define CONFIG_SYS_FPGA_BASE 0xF0000000 | |
| 566806ca SR |
61 | |
| 62 | /*----------------------------------------------------------------------- | |
| 8a24c07b GE |
63 | * Initial RAM & Stack Pointer Configuration Options |
| 64 | * | |
| 65 | * There are traditionally three options for the primordial | |
| 66 | * (i.e. initial) stack usage on the 405-series: | |
| 67 | * | |
| 68 | * 1) On-chip Memory (OCM) (i.e. SRAM) | |
| 69 | * 2) Data cache | |
| 70 | * 3) SDRAM | |
| 71 | * | |
| 72 | * For the 405EX(r), there is no OCM, so we are left with (2) or (3) | |
| 73 | * the latter of which is less than desireable since it requires | |
| 74 | * setting up the SDRAM and ECC in assembly code. | |
| 75 | * | |
| 6d0f6bcf | 76 | * To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip |
| 8a24c07b | 77 | * select on the External Bus Controller (EBC) and then select a |
| 6d0f6bcf JCPV |
78 | * value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid, |
| 79 | * physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and | |
| 80 | * select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid, | |
| 8a24c07b GE |
81 | * physical SDRAM to use (3). |
| 82 | *-----------------------------------------------------------------------*/ | |
| 83 | ||
| 6d0f6bcf | 84 | #define CONFIG_SYS_INIT_DCACHE_CS 4 |
| 8a24c07b | 85 | |
| 6d0f6bcf JCPV |
86 | #if defined(CONFIG_SYS_INIT_DCACHE_CS) |
| 87 | #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */ | |
| 8a24c07b | 88 | #else |
| 6d0f6bcf JCPV |
89 | #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + (32 << 20)) /* 32 MiB */ |
| 90 | #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ | |
| 8a24c07b | 91 | |
| 553f0982 | 92 | #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) /* 4 KiB */ |
| 25ddd1fb | 93 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| 566806ca | 94 | |
| 8a24c07b GE |
95 | /* |
| 96 | * If the data cache is being used for the primordial stack and global | |
| 97 | * data area, the POST word must be placed somewhere else. The General | |
| 98 | * Purpose Timer (GPT) is unused by u-boot and the kernel and preserves | |
| 99 | * its compare and mask register contents across reset, so it is used | |
| 100 | * for the POST word. | |
| 101 | */ | |
| 102 | ||
| 6d0f6bcf JCPV |
103 | #if defined(CONFIG_SYS_INIT_DCACHE_CS) |
| 104 | # define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 800eb096 | 105 | # define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6) |
| 8a24c07b | 106 | #else |
| 6d0f6bcf JCPV |
107 | # define CONFIG_SYS_INIT_EXTRA_SIZE 16 |
| 108 | # define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE) | |
| 6d0f6bcf JCPV |
109 | # define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_INIT_RAM_ADDR |
| 110 | #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ | |
| 566806ca SR |
111 | |
| 112 | /*----------------------------------------------------------------------- | |
| 113 | * Serial Port | |
| 114 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf | 115 | #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ |
| 550650dd | 116 | #define CONFIG_CONS_INDEX 1 /* Use UART0 */ |
| 566806ca | 117 | |
| 566806ca SR |
118 | /*----------------------------------------------------------------------- |
| 119 | * Environment | |
| 120 | *----------------------------------------------------------------------*/ | |
| 5a1aceb0 | 121 | #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ |
| 566806ca SR |
122 | |
| 123 | /*----------------------------------------------------------------------- | |
| 124 | * FLASH related | |
| 125 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf | 126 | #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ |
| 00b1883a | 127 | #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ |
| 566806ca | 128 | |
| 6d0f6bcf JCPV |
129 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} |
| 130 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ | |
| 131 | #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ | |
| 566806ca | 132 | |
| 6d0f6bcf JCPV |
133 | #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
| 134 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ | |
| 566806ca | 135 | |
| 6d0f6bcf JCPV |
136 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ |
| 137 | #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ | |
| 566806ca | 138 | |
| 5a1aceb0 | 139 | #ifdef CONFIG_ENV_IS_IN_FLASH |
| 0e8d1586 | 140 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ |
| 6d0f6bcf | 141 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) |
| 0e8d1586 | 142 | #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ |
| 566806ca SR |
143 | |
| 144 | /* Address and size of Redundant Environment Sector */ | |
| 0e8d1586 JCPV |
145 | #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) |
| 146 | #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) | |
| 5a1aceb0 | 147 | #endif /* CONFIG_ENV_IS_IN_FLASH */ |
| 566806ca | 148 | |
| 3d6cb3b2 SR |
149 | /*----------------------------------------------------------------------- |
| 150 | * NAND FLASH | |
| 151 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf | 152 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| 6d0f6bcf JCPV |
153 | #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) |
| 154 | #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ | |
| 3d6cb3b2 | 155 | |
| 566806ca SR |
156 | /*----------------------------------------------------------------------- |
| 157 | * DDR SDRAM | |
| 158 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf | 159 | #define CONFIG_SYS_MBYTES_SDRAM (256) /* 256MB */ |
| 566806ca | 160 | |
| f6b6c458 AG |
161 | /* |
| 162 | * CONFIG_PPC4xx_DDR_AUTOCALIBRATION | |
| 163 | * | |
| 164 | * Note: DDR Autocalibration Method_A scans the full range of possible PPC4xx | |
| 165 | * SDRAM Controller DDR autocalibration values and takes a lot longer | |
| 166 | * to run than Method_B. | |
| 167 | * (See the Method_A and Method_B algorithm discription in the file: | |
| a47a12be | 168 | * arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c) |
| f6b6c458 AG |
169 | * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A |
| 170 | * | |
| 171 | * DDR Autocalibration Method_B is the default. | |
| 172 | */ | |
| 173 | #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */ | |
| 174 | #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */ | |
| 175 | #undef CONFIG_PPC4xx_DDR_METHOD_A | |
| 176 | ||
| 6d0f6bcf | 177 | #define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE) |
| 8a24c07b GE |
178 | |
| 179 | /* DDR1/2 SDRAM Device Control Register Data Values */ | |
| 6d0f6bcf | 180 | #define CONFIG_SYS_SDRAM0_MB0CF ((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3) | \ |
| 8a24c07b GE |
181 | SDRAM_RXBAS_SDSZ_256MB | \ |
| 182 | SDRAM_RXBAS_SDAM_MODE7 | \ | |
| 183 | SDRAM_RXBAS_SDBE_ENABLE) | |
| 6d0f6bcf JCPV |
184 | #define CONFIG_SYS_SDRAM0_MB1CF SDRAM_RXBAS_SDBE_DISABLE |
| 185 | #define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE | |
| 186 | #define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE | |
| 187 | #define CONFIG_SYS_SDRAM0_MCOPT1 (SDRAM_MCOPT1_PMU_OPEN | \ | |
| 2e205084 GE |
188 | SDRAM_MCOPT1_8_BANKS | \ |
| 189 | SDRAM_MCOPT1_DDR2_TYPE | \ | |
| 190 | SDRAM_MCOPT1_QDEP | \ | |
| 191 | SDRAM_MCOPT1_DCOO_DISABLED) | |
| 6d0f6bcf JCPV |
192 | #define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000 |
| 193 | #define CONFIG_SYS_SDRAM0_MODT0 (SDRAM_MODT_EB0W_ENABLE | \ | |
| 2e205084 | 194 | SDRAM_MODT_EB0R_ENABLE) |
| 6d0f6bcf JCPV |
195 | #define CONFIG_SYS_SDRAM0_MODT1 0x00000000 |
| 196 | #define CONFIG_SYS_SDRAM0_CODT (SDRAM_CODT_RK0R_ON | \ | |
| 2e205084 GE |
197 | SDRAM_CODT_CKLZ_36OHM | \ |
| 198 | SDRAM_CODT_DQS_1_8_V_DDR2 | \ | |
| 199 | SDRAM_CODT_IO_NMODE) | |
| 6d0f6bcf JCPV |
200 | #define CONFIG_SYS_SDRAM0_RTR SDRAM_RTR_RINT_ENCODE(1560) |
| 201 | #define CONFIG_SYS_SDRAM0_INITPLR0 (SDRAM_INITPLR_ENABLE | \ | |
| 2e205084 GE |
202 | SDRAM_INITPLR_IMWT_ENCODE(80) | \ |
| 203 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP)) | |
| 6d0f6bcf | 204 | #define CONFIG_SYS_SDRAM0_INITPLR1 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
205 | SDRAM_INITPLR_IMWT_ENCODE(3) | \ |
| 206 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \ | |
| 207 | SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \ | |
| 208 | SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL)) | |
| 6d0f6bcf | 209 | #define CONFIG_SYS_SDRAM0_INITPLR2 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
210 | SDRAM_INITPLR_IMWT_ENCODE(2) | \ |
| 211 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ | |
| 212 | SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2) | \ | |
| 213 | SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL)) | |
| 6d0f6bcf | 214 | #define CONFIG_SYS_SDRAM0_INITPLR3 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
215 | SDRAM_INITPLR_IMWT_ENCODE(2) | \ |
| 216 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ | |
| 217 | SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3) | \ | |
| 218 | SDRAM_INITPLR_IMA_ENCODE(0)) | |
| 6d0f6bcf | 219 | #define CONFIG_SYS_SDRAM0_INITPLR4 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
220 | SDRAM_INITPLR_IMWT_ENCODE(2) | \ |
| 221 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ | |
| 222 | SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \ | |
| 223 | SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_DISABLE | \ | |
| 224 | JEDEC_MA_EMR_RTT_75OHM)) | |
| 6d0f6bcf | 225 | #define CONFIG_SYS_SDRAM0_INITPLR5 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
226 | SDRAM_INITPLR_IMWT_ENCODE(2) | \ |
| 227 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ | |
| 228 | SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \ | |
| 229 | SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \ | |
| 230 | JEDEC_MA_MR_CL_DDR2_4_0_CLK | \ | |
| 231 | JEDEC_MA_MR_BLEN_4 | \ | |
| 232 | JEDEC_MA_MR_DLL_RESET)) | |
| 6d0f6bcf | 233 | #define CONFIG_SYS_SDRAM0_INITPLR6 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
234 | SDRAM_INITPLR_IMWT_ENCODE(3) | \ |
| 235 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \ | |
| 236 | SDRAM_INITPLR_IBA_ENCODE(0x0) | \ | |
| 237 | SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL)) | |
| 6d0f6bcf | 238 | #define CONFIG_SYS_SDRAM0_INITPLR7 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
239 | SDRAM_INITPLR_IMWT_ENCODE(26) | \ |
| 240 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH)) | |
| 6d0f6bcf | 241 | #define CONFIG_SYS_SDRAM0_INITPLR8 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
242 | SDRAM_INITPLR_IMWT_ENCODE(26) | \ |
| 243 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH)) | |
| 6d0f6bcf | 244 | #define CONFIG_SYS_SDRAM0_INITPLR9 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
245 | SDRAM_INITPLR_IMWT_ENCODE(26) | \ |
| 246 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH)) | |
| 6d0f6bcf | 247 | #define CONFIG_SYS_SDRAM0_INITPLR10 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
248 | SDRAM_INITPLR_IMWT_ENCODE(26) | \ |
| 249 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH)) | |
| 6d0f6bcf | 250 | #define CONFIG_SYS_SDRAM0_INITPLR11 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
251 | SDRAM_INITPLR_IMWT_ENCODE(2) | \ |
| 252 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ | |
| 253 | SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \ | |
| 254 | SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \ | |
| 255 | JEDEC_MA_MR_CL_DDR2_4_0_CLK | \ | |
| 256 | JEDEC_MA_MR_BLEN_4)) | |
| 6d0f6bcf | 257 | #define CONFIG_SYS_SDRAM0_INITPLR12 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
258 | SDRAM_INITPLR_IMWT_ENCODE(2) | \ |
| 259 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ | |
| 260 | SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \ | |
| 261 | SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER | \ | |
| 262 | JEDEC_MA_EMR_RDQS_DISABLE | \ | |
| 263 | JEDEC_MA_EMR_DQS_DISABLE | \ | |
| 264 | JEDEC_MA_EMR_RTT_DISABLED | \ | |
| 265 | JEDEC_MA_EMR_ODS_NORMAL)) | |
| 6d0f6bcf | 266 | #define CONFIG_SYS_SDRAM0_INITPLR13 (SDRAM_INITPLR_ENABLE | \ |
| 2e205084 GE |
267 | SDRAM_INITPLR_IMWT_ENCODE(2) | \ |
| 268 | SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ | |
| 269 | SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \ | |
| 270 | SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT | \ | |
| 271 | JEDEC_MA_EMR_RDQS_DISABLE | \ | |
| 272 | JEDEC_MA_EMR_DQS_DISABLE | \ | |
| 273 | JEDEC_MA_EMR_RTT_DISABLED | \ | |
| 274 | JEDEC_MA_EMR_ODS_NORMAL)) | |
| 6d0f6bcf JCPV |
275 | #define CONFIG_SYS_SDRAM0_INITPLR14 (SDRAM_INITPLR_DISABLE) |
| 276 | #define CONFIG_SYS_SDRAM0_INITPLR15 (SDRAM_INITPLR_DISABLE) | |
| 277 | #define CONFIG_SYS_SDRAM0_RQDC (SDRAM_RQDC_RQDE_ENABLE | \ | |
| 2e205084 | 278 | SDRAM_RQDC_RQFD_ENCODE(56)) |
| 6d0f6bcf JCPV |
279 | #define CONFIG_SYS_SDRAM0_RFDC SDRAM_RFDC_RFFD_ENCODE(521) |
| 280 | #define CONFIG_SYS_SDRAM0_RDCC (SDRAM_RDCC_RDSS_T2) | |
| 281 | #define CONFIG_SYS_SDRAM0_DLCR (SDRAM_DLCR_DCLM_AUTO | \ | |
| 2e205084 GE |
282 | SDRAM_DLCR_DLCS_CONT_DONE | \ |
| 283 | SDRAM_DLCR_DLCV_ENCODE(165)) | |
| 6d0f6bcf JCPV |
284 | #define CONFIG_SYS_SDRAM0_CLKTR (SDRAM_CLKTR_CLKP_180_DEG_ADV) |
| 285 | #define CONFIG_SYS_SDRAM0_WRDTR 0x00000000 | |
| 286 | #define CONFIG_SYS_SDRAM0_SDTR1 (SDRAM_SDTR1_LDOF_2_CLK | \ | |
| 2e205084 GE |
287 | SDRAM_SDTR1_RTW_2_CLK | \ |
| 288 | SDRAM_SDTR1_RTRO_1_CLK) | |
| 6d0f6bcf | 289 | #define CONFIG_SYS_SDRAM0_SDTR2 (SDRAM_SDTR2_RCD_3_CLK | \ |
| 2e205084 GE |
290 | SDRAM_SDTR2_WTR_2_CLK | \ |
| 291 | SDRAM_SDTR2_XSNR_32_CLK | \ | |
| 292 | SDRAM_SDTR2_WPC_4_CLK | \ | |
| 293 | SDRAM_SDTR2_RPC_2_CLK | \ | |
| 294 | SDRAM_SDTR2_RP_3_CLK | \ | |
| 295 | SDRAM_SDTR2_RRD_2_CLK) | |
| 6d0f6bcf | 296 | #define CONFIG_SYS_SDRAM0_SDTR3 (SDRAM_SDTR3_RAS_ENCODE(8) | \ |
| 2e205084 GE |
297 | SDRAM_SDTR3_RC_ENCODE(11) | \ |
| 298 | SDRAM_SDTR3_XCS | \ | |
| 299 | SDRAM_SDTR3_RFC_ENCODE(26)) | |
| 6d0f6bcf | 300 | #define CONFIG_SYS_SDRAM0_MMODE (SDRAM_MMODE_WR_DDR2_3_CYC | \ |
| 2e205084 GE |
301 | SDRAM_MMODE_DCL_DDR2_4_0_CLK | \ |
| 302 | SDRAM_MMODE_BLEN_4) | |
| 6d0f6bcf | 303 | #define CONFIG_SYS_SDRAM0_MEMODE (SDRAM_MEMODE_DQS_DISABLE | \ |
| 2e205084 | 304 | SDRAM_MEMODE_RTT_75OHM) |
| 8a24c07b | 305 | |
| 566806ca SR |
306 | /*----------------------------------------------------------------------- |
| 307 | * I2C | |
| 308 | *----------------------------------------------------------------------*/ | |
| 880540de | 309 | #define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 |
| 566806ca | 310 | |
| 6d0f6bcf JCPV |
311 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */ |
| 312 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ | |
| f6af8ce0 SR |
313 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 |
| 314 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 | |
| 566806ca | 315 | |
| 4b1389e0 SR |
316 | /* I2C bootstrap EEPROM */ |
| 317 | #define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52 | |
| 318 | #define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 | |
| 319 | #define CONFIG_4xx_CONFIG_BLOCKSIZE 16 | |
| 320 | ||
| 566806ca SR |
321 | /* Standard DTT sensor configuration */ |
| 322 | #define CONFIG_DTT_DS1775 1 | |
| 323 | #define CONFIG_DTT_SENSORS { 0 } | |
| 6d0f6bcf | 324 | #define CONFIG_SYS_I2C_DTT_ADDR 0x48 |
| 566806ca SR |
325 | |
| 326 | /* RTC configuration */ | |
| 327 | #define CONFIG_RTC_DS1338 1 | |
| 6d0f6bcf | 328 | #define CONFIG_SYS_I2C_RTC_ADDR 0x68 |
| 566806ca SR |
329 | |
| 330 | /*----------------------------------------------------------------------- | |
| 331 | * Ethernet | |
| 332 | *----------------------------------------------------------------------*/ | |
| 333 | #define CONFIG_M88E1111_PHY 1 | |
| 334 | #define CONFIG_IBM_EMAC4_V4 1 | |
| 1740c1bf | 335 | #define CONFIG_EMAC_PHY_MODE EMAC_PHY_MODE_RGMII_RGMII |
| 566806ca SR |
336 | #define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ |
| 337 | ||
| 338 | #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ | |
| 339 | #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ | |
| 340 | ||
| 341 | #define CONFIG_HAS_ETH0 1 | |
| 342 | ||
| 566806ca SR |
343 | #define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ |
| 344 | #define CONFIG_PHY1_ADDR 2 | |
| 345 | ||
| f6b6c458 AG |
346 | /* Debug messages for the DDR autocalibration */ |
| 347 | #define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */ | |
| 348 | ||
| 490f2040 SR |
349 | /* |
| 350 | * Default environment variables | |
| 351 | */ | |
| 566806ca | 352 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 490f2040 SR |
353 | CONFIG_AMCC_DEF_ENV \ |
| 354 | CONFIG_AMCC_DEF_ENV_POWERPC \ | |
| 355 | CONFIG_AMCC_DEF_ENV_PPC_OLD \ | |
| 356 | CONFIG_AMCC_DEF_ENV_NOR_UPD \ | |
| 566806ca | 357 | "logversion=2\0" \ |
| 566806ca | 358 | "kernel_addr=fc000000\0" \ |
| 64e541f4 | 359 | "fdt_addr=fc1e0000\0" \ |
| 566806ca | 360 | "ramdisk_addr=fc200000\0" \ |
| 566806ca | 361 | "pciconfighost=1\0" \ |
| d4cb2d17 | 362 | "pcie_mode=RP:RP\0" \ |
| 566806ca | 363 | "" |
| 566806ca SR |
364 | |
| 365 | /* | |
| 490f2040 | 366 | * Commands additional to the ones defined in amcc-common.h |
| 566806ca | 367 | */ |
| 4b1389e0 | 368 | #define CONFIG_CMD_CHIP_CONFIG |
| 566806ca | 369 | #define CONFIG_CMD_DATE |
| 566806ca | 370 | #define CONFIG_CMD_NAND |
| 566806ca | 371 | #define CONFIG_CMD_PCI |
| 566806ca | 372 | |
| dd7c3020 | 373 | #define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY |
| dd7c3020 | 374 | |
| 566806ca | 375 | /* POST support */ |
| 6d0f6bcf JCPV |
376 | #define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ |
| 377 | CONFIG_SYS_POST_CPU | \ | |
| 378 | CONFIG_SYS_POST_ETHER | \ | |
| 379 | CONFIG_SYS_POST_I2C | \ | |
| dd7c3020 | 380 | CONFIG_SYS_POST_MEMORY_ON | \ |
| 6d0f6bcf | 381 | CONFIG_SYS_POST_UART) |
| 566806ca SR |
382 | |
| 383 | /* Define here the base-addresses of the UARTs to test in POST */ | |
| 5d7c73e6 SR |
384 | #define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \ |
| 385 | CONFIG_SYS_NS16550_COM2 } | |
| 566806ca SR |
386 | |
| 387 | #define CONFIG_LOGBUFFER | |
| 6d0f6bcf | 388 | #define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */ |
| 566806ca | 389 | |
| 566806ca SR |
390 | /*----------------------------------------------------------------------- |
| 391 | * PCI stuff | |
| 392 | *----------------------------------------------------------------------*/ | |
| 842033e6 | 393 | #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ |
| 566806ca SR |
394 | #define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ |
| 395 | #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ | |
| 396 | #define CONFIG_PCI_CONFIG_HOST_BRIDGE | |
| 397 | ||
| 398 | /*----------------------------------------------------------------------- | |
| 399 | * PCIe stuff | |
| 400 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf JCPV |
401 | #define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */ |
| 402 | #define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* 128 Meg, smallest incr per port */ | |
| 566806ca | 403 | |
| 6d0f6bcf JCPV |
404 | #define CONFIG_SYS_PCIE0_CFGBASE 0xa0000000 /* remote access */ |
| 405 | #define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000 /* local access */ | |
| 406 | #define CONFIG_SYS_PCIE0_CFGMASK 0xe0000001 /* 512 Meg */ | |
| 566806ca | 407 | |
| 6d0f6bcf JCPV |
408 | #define CONFIG_SYS_PCIE1_CFGBASE 0xc0000000 /* remote access */ |
| 409 | #define CONFIG_SYS_PCIE1_XCFGBASE 0xd0000000 /* local access */ | |
| 410 | #define CONFIG_SYS_PCIE1_CFGMASK 0xe0000001 /* 512 Meg */ | |
| 566806ca | 411 | |
| 6d0f6bcf JCPV |
412 | #define CONFIG_SYS_PCIE0_UTLBASE 0xef502000 |
| 413 | #define CONFIG_SYS_PCIE1_UTLBASE 0xef503000 | |
| 566806ca SR |
414 | |
| 415 | /* base address of inbound PCIe window */ | |
| 6d0f6bcf | 416 | #define CONFIG_SYS_PCIE_INBOUND_BASE 0x0000000000000000ULL |
| 566806ca | 417 | |
| 566806ca SR |
418 | /*----------------------------------------------------------------------- |
| 419 | * External Bus Controller (EBC) Setup | |
| 420 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf | 421 | #define CONFIG_SYS_NAND_CS 1 /* NAND chip connected to CSx */ |
| 566806ca SR |
422 | |
| 423 | /* Memory Bank 0 (NOR-FLASH) initialization */ | |
| 6d0f6bcf JCPV |
424 | #define CONFIG_SYS_EBC_PB0AP 0x05806500 |
| 425 | #define CONFIG_SYS_EBC_PB0CR 0xFC0DA000 /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/ | |
| 566806ca SR |
426 | |
| 427 | /* Memory Bank 1 (NAND-FLASH) initialization */ | |
| 6d0f6bcf JCPV |
428 | #define CONFIG_SYS_EBC_PB1AP 0x018003c0 |
| 429 | #define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_NAND_ADDR | 0x1e000) | |
| 566806ca | 430 | |
| 9998b136 SR |
431 | /* Memory Bank 2 (FPGA) initialization */ |
| 432 | #define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_ENABLED | \ | |
| 433 | EBC_BXAP_FWT_ENCODE(6) | \ | |
| 434 | EBC_BXAP_BWT_ENCODE(1) | \ | |
| 435 | EBC_BXAP_BCE_DISABLE | \ | |
| 436 | EBC_BXAP_BCT_2TRANS | \ | |
| 437 | EBC_BXAP_CSN_ENCODE(0) | \ | |
| 438 | EBC_BXAP_OEN_ENCODE(0) | \ | |
| 439 | EBC_BXAP_WBN_ENCODE(3) | \ | |
| 440 | EBC_BXAP_WBF_ENCODE(1) | \ | |
| 441 | EBC_BXAP_TH_ENCODE(4) | \ | |
| 442 | EBC_BXAP_RE_DISABLED | \ | |
| 443 | EBC_BXAP_SOR_DELAYED | \ | |
| 444 | EBC_BXAP_BEM_WRITEONLY | \ | |
| 445 | EBC_BXAP_PEN_DISABLED) | |
| 446 | #define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FPGA_BASE | 0x18000) | |
| 566806ca | 447 | |
| 6d0f6bcf | 448 | #define CONFIG_SYS_EBC_CFG 0x7FC00000 /* EBC0_CFG */ |
| 566806ca | 449 | |
| 566806ca SR |
450 | /*----------------------------------------------------------------------- |
| 451 | * GPIO Setup | |
| 452 | *----------------------------------------------------------------------*/ | |
| 6d0f6bcf | 453 | #define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ |
| 9ea61b57 SR |
454 | { \ |
| 455 | /* GPIO Core 0 */ \ | |
| 456 | {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO0 EBC_DATA_PAR(0) */ \ | |
| 457 | {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO1 EBC_DATA_PAR(1) */ \ | |
| 458 | {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO2 EBC_DATA_PAR(2) */ \ | |
| 459 | {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO3 EBC_DATA_PAR(3) */ \ | |
| 460 | {GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO4 EBC_DATA(20) USB2_DATA(4) */ \ | |
| 461 | {GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO5 EBC_DATA(21) USB2_DATA(5) */ \ | |
| 462 | {GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO6 EBC_DATA(22) USB2_DATA(6) */ \ | |
| 463 | {GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO7 EBC_DATA(23) USB2_DATA(7) */ \ | |
| 8be76090 SR |
464 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 CS(1)/NFCE(1) IRQ(7) */ \ |
| 465 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 CS(2)/NFCE(2) IRQ(8) */ \ | |
| 466 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3) IRQ(9) */ \ | |
| 9ea61b57 SR |
467 | {GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 IRQ(6) */ \ |
| 468 | {GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16) USB2_DATA(0) */ \ | |
| 469 | {GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17) USB2_DATA(1) */ \ | |
| 7cfc12a7 SR |
470 | {GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18) USB2_DATA(2) */ \ |
| 471 | {GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19) USB2_DATA(3) */ \ | |
| 9ea61b57 | 472 | {GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD UART1_CTS */ \ |
| 8be76090 | 473 | {GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR UART1_RTS */ \ |
| 9ea61b57 SR |
474 | {GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS */ \ |
| 475 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS */ \ | |
| 476 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO20 UART0_DTR UART1_TX */ \ | |
| 477 | {GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0}, /* GPIO21 UART0_RI UART1_RX */ \ | |
| 478 | {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ DMA_ACK2 */ \ | |
| 479 | {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK DMA_REQ2 */ \ | |
| 480 | {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ DMA_EOT2 IRQ(4) */ \ | |
| 481 | {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK DMA_ACK3 IRQ(3) */ \ | |
| 482 | {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5) DMA_EOT0 TS(3) */ \ | |
| 483 | {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ DMA_EOT3 IRQ(5) */ \ | |
| 484 | {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO28 */ \ | |
| 8be76090 SR |
485 | {GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0}, /* GPIO29 DMA_EOT1 IRQ(2) */ \ |
| 486 | {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO30 DMA_REQ1 IRQ(1) */ \ | |
| 487 | {GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO31 DMA_ACK1 IRQ(0) */ \ | |
| 9ea61b57 SR |
488 | } \ |
| 489 | } | |
| 566806ca | 490 | |
| 566806ca SR |
491 | /*----------------------------------------------------------------------- |
| 492 | * Some Kilauea stuff..., mainly fpga registers | |
| 493 | */ | |
| 6d0f6bcf | 494 | #define CONFIG_SYS_FPGA_REG_BASE CONFIG_SYS_FPGA_BASE |
| 9998b136 | 495 | #define CONFIG_SYS_FPGA_FIFO_BASE (CONFIG_SYS_FPGA_BASE | (1 << 10)) |
| 566806ca SR |
496 | |
| 497 | /* interrupt */ | |
| 6d0f6bcf JCPV |
498 | #define CONFIG_SYS_FPGA_SLIC0_R_DPRAM_INT 0x80000000 |
| 499 | #define CONFIG_SYS_FPGA_SLIC0_W_DPRAM_INT 0x40000000 | |
| 500 | #define CONFIG_SYS_FPGA_SLIC1_R_DPRAM_INT 0x20000000 | |
| 501 | #define CONFIG_SYS_FPGA_SLIC1_W_DPRAM_INT 0x10000000 | |
| 502 | #define CONFIG_SYS_FPGA_PHY0_INT 0x08000000 | |
| 503 | #define CONFIG_SYS_FPGA_PHY1_INT 0x04000000 | |
| 504 | #define CONFIG_SYS_FPGA_SLIC0_INT 0x02000000 | |
| 505 | #define CONFIG_SYS_FPGA_SLIC1_INT 0x01000000 | |
| 566806ca SR |
506 | |
| 507 | /* DPRAM setting */ | |
| 508 | /* 00: 32B; 01: 64B; 10: 128B; 11: 256B */ | |
| 6d0f6bcf JCPV |
509 | #define CONFIG_SYS_FPGA_DPRAM_R_INT_LINE 0x00400000 /* 64 B */ |
| 510 | #define CONFIG_SYS_FPGA_DPRAM_W_INT_LINE 0x00100000 /* 64 B */ | |
| 511 | #define CONFIG_SYS_FPGA_DPRAM_RW_TYPE 0x00080000 | |
| 512 | #define CONFIG_SYS_FPGA_DPRAM_RST 0x00040000 | |
| 513 | #define CONFIG_SYS_FPGA_UART0_FO 0x00020000 | |
| 514 | #define CONFIG_SYS_FPGA_UART1_FO 0x00010000 | |
| 566806ca SR |
515 | |
| 516 | /* loopback */ | |
| 6d0f6bcf JCPV |
517 | #define CONFIG_SYS_FPGA_CHIPSIDE_LOOPBACK 0x00004000 |
| 518 | #define CONFIG_SYS_FPGA_LINESIDE_LOOPBACK 0x00008000 | |
| 519 | #define CONFIG_SYS_FPGA_SLIC0_ENABLE 0x00002000 | |
| 520 | #define CONFIG_SYS_FPGA_SLIC1_ENABLE 0x00001000 | |
| 521 | #define CONFIG_SYS_FPGA_SLIC0_CS 0x00000800 | |
| 522 | #define CONFIG_SYS_FPGA_SLIC1_CS 0x00000400 | |
| 523 | #define CONFIG_SYS_FPGA_USER_LED0 0x00000200 | |
| 524 | #define CONFIG_SYS_FPGA_USER_LED1 0x00000100 | |
| 566806ca | 525 | |
| 9998b136 SR |
526 | #define CONFIG_SYS_FPGA_MAGIC_MASK 0xffff0000 |
| 527 | #define CONFIG_SYS_FPGA_MAGIC 0xabcd0000 | |
| 528 | #define CONFIG_SYS_FPGA_VER_MASK 0x0000ff00 | |
| 529 | ||
| 837c730b | 530 | #endif /* __CONFIG_H */ |