[people/ms/u-boot.git] / include / configs / km / km83xx-common.h

/*
 * (C) Copyright 2010
 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_KM83XX_H
#define __CONFIG_KM83XX_H

/* include common defines/options for all Keymile boards */
#include "keymile-common.h"
#include "km-powerpc.h"

#ifndef MTDIDS_DEFAULT
# define MTDIDS_DEFAULT	"nor0=boot"
#endif /* MTDIDS_DEFAULT */

#ifndef MTDPARTS_DEFAULT
# define MTDPARTS_DEFAULT	"mtdparts="			\
	"boot:"							\
		"768k(u-boot),"					\
		"128k(env),"					\
		"128k(envred),"					\
		"-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"
#endif /* MTDPARTS_DEFAULT */

#define CONFIG_MISC_INIT_R
/*
 * System Clock Setup
 */
#define CONFIG_83XX_CLKIN		66000000
#define CONFIG_SYS_CLK_FREQ		66000000
#define CONFIG_83XX_PCICLK		66000000

/*
 * IMMR new address
 */
#define CONFIG_SYS_IMMR		0xE0000000

/*
 * Bus Arbitration Configuration Register (ACR)
 */
#define CONFIG_SYS_ACR_PIPE_DEP 3       /* pipeline depth 4 transactions */
#define CONFIG_SYS_ACR_RPTCNT   3       /* 4 consecutive transactions */
#define CONFIG_SYS_ACR_APARK    0       /* park bus to master (below) */
#define CONFIG_SYS_ACR_PARKM    3       /* parking master = QuiccEngine */

/*
 * DDR Setup
 */
#define CONFIG_SYS_DDR_BASE		0x00000000 /* DDR is system memory */
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
#define CONFIG_SYS_SDRAM_BASE2	(CONFIG_SYS_SDRAM_BASE + 0x10000000) /* +256M */

#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN | \
					DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)

#define CFG_83XX_DDR_USES_CS0

/*
 * Manually set up DDR parameters
 */
#define CONFIG_DDR_II
#define CONFIG_SYS_DDR_SIZE		2048 /* MB */

/*
 * The reserved memory
 */
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_FLASH_BASE		0xF0000000

#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#endif

/* Reserve 768 kB for Mon */
#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)

/*
 * Initial RAM Base Address Setup
 */
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* End of used area in RAM */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
						GENERATED_GBL_DATA_SIZE)

/*
 * Init Local Bus Memory Controller:
 *
 * Bank Bus     Machine PortSz  Size  Device
 * ---- ---     ------- ------  -----  ------
 *  0   Local   GPCM    16 bit  256MB FLASH
 *  1   Local   GPCM     8 bit  128MB GPIO/PIGGY
 *
 */
/*
 * FLASH on the Local Bus
 */
#define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
#define CONFIG_FLASH_CFI_DRIVER		/* use the CFI driver */
#define CONFIG_SYS_FLASH_SIZE		256 /* max FLASH size is 256M */
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | LBLAWAR_256MB)

#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE | \
				BR_PS_16 | /* 16 bit port size */ \
				BR_MS_GPCM | /* MSEL = GPCM */ \
				BR_V)

#define CONFIG_SYS_OR0_PRELIM	(MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \
				OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
				OR_GPCM_SCY_5 | \
				OR_GPCM_TRLX_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS	1   /* max num of flash banks	*/
#define CONFIG_SYS_MAX_FLASH_SECT	512 /* max num of sects on one chip */
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }

/*
 * PRIO1/PIGGY on the local bus CS1
 */
/* Window base at flash base */
#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_KMBEC_FPGA_BASE
#define CONFIG_SYS_LBLAWAR1_PRELIM	(LBLAWAR_EN | LBLAWAR_128MB)

#define CONFIG_SYS_BR1_PRELIM	(CONFIG_SYS_KMBEC_FPGA_BASE | \
				BR_PS_8 | /* 8 bit port size */ \
				BR_MS_GPCM | /* MSEL = GPCM */ \
				BR_V)
#define CONFIG_SYS_OR1_PRELIM	(MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) | \
				OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
				OR_GPCM_SCY_2 | \
				OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/*
 * Serial Port
 */
#define CONFIG_CONS_INDEX	1
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)

/*
 * QE UEC ethernet configuration
 */
#define CONFIG_UEC_ETH
#define CONFIG_ETHPRIME		"UEC0"

#if !defined(CONFIG_MPC8309)
#define CONFIG_UEC_ETH1		/* GETH1 */
#define UEC_VERBOSE_DEBUG	1
#endif

#ifdef CONFIG_UEC_ETH1
#define CONFIG_SYS_UEC1_UCC_NUM	3	/* UCC4 */
#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK_NONE /* not used in RMII Mode */
#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK17
#define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR	0
#define CONFIG_SYS_UEC1_INTERFACE_TYPE	PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED	100
#endif

/*
 * Environment
 */

#ifndef CONFIG_SYS_RAMBOOT
#define CONFIG_ENV_IS_IN_FLASH
#ifndef CONFIG_ENV_ADDR
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
					CONFIG_SYS_MONITOR_LEN)
#endif
#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
#ifndef CONFIG_ENV_OFFSET
#define CONFIG_ENV_OFFSET	(CONFIG_SYS_MONITOR_LEN)
#endif

/* Address and size of Redundant Environment Sector	*/
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
						CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)

#else /* CFG_SYS_RAMBOOT */
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
#define CONFIG_ENV_SIZE		0x2000
#endif /* CFG_SYS_RAMBOOT */

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_NUM_I2C_BUSES	4
#define CONFIG_SYS_I2C_MAX_HOPS		1
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED	200000
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
#define CONFIG_SYS_I2C_OFFSET		0x3000
#define CONFIG_SYS_FSL_I2C2_SPEED	200000
#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
#define CONFIG_SYS_I2C_BUSES	{{0, {I2C_NULL_HOP} }, \
		{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
		{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
		{1, {I2C_NULL_HOP} } }

#define CONFIG_KM_IVM_BUS		2	/* I2C2 (Mux-Port 1)*/

#if defined(CONFIG_CMD_NAND)
#define CONFIG_NAND_KMETER1
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		CONFIG_SYS_KMBEC_FPGA_BASE
#endif

#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
#endif

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)

/*
 * Core HID Setup
 */
#define CONFIG_SYS_HID0_INIT		0x000000000
#define CONFIG_SYS_HID0_FINAL		(HID0_ENABLE_MACHINE_CHECK | \
					 HID0_ENABLE_INSTRUCTION_CACHE)
#define CONFIG_SYS_HID2			HID2_HBE

/*
 * MMU Setup
 */

#define CONFIG_HIGH_BATS	1	/* High BATs supported */

/* DDR: cache cacheable */
#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \
				BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
					BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U

/* IMMRBAR & PCI IO: cache-inhibit and guarded */
#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_IMMR | BATL_PP_RW | \
				BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS \
					| BATU_VP)
#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U

/* PRIO1, PIGGY:  icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_RW | \
				BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_KMBEC_FPGA_BASE | BATU_BL_128M | \
				BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_RW | \
				 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U

/* FLASH: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \
					BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_FLASH_BASE | BATU_BL_256M | \
					BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \
				 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U

/* Stack in dcache: cacheable, no memory coherence */
#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \
					BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U

/*
 * Internal Definitions
 */
#define BOOTFLASH_START	0xF0000000

#define CONFIG_KM_CONSOLE_TTY	"ttyS0"

/*
 * Environment Configuration
 */
#define CONFIG_ENV_OVERWRITE
#ifndef CONFIG_KM_DEF_ENV		/* if not set by keymile-common.h */
#define CONFIG_KM_DEF_ENV "km-common=empty\0"
#endif

#ifndef CONFIG_KM_DEF_ARCH
#define CONFIG_KM_DEF_ARCH	"arch=ppc_82xx\0"
#endif

#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_KM_DEF_ENV						\
	CONFIG_KM_DEF_ARCH						\
	"newenv="							\
		"prot off "__stringify(CONFIG_ENV_ADDR)" +0x40000 && "	\
		"era "__stringify(CONFIG_ENV_ADDR)" +0x40000\0"		\
	"unlock=yes\0"							\
	""

#if defined(CONFIG_UEC_ETH)
#define CONFIG_HAS_ETH0
#endif

#endif /* __CONFIG_KM83XX_H */
Commit	Line	Data
62ddcf05 HS	1	/*
	2	* (C) Copyright 2010
	3	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
62ddcf05 HS	6	*/
	7
	8	#ifndef __CONFIG_KM83XX_H
	9	#define __CONFIG_KM83XX_H
	10
	11	/* include common defines/options for all Keymile boards */
	12	#include "keymile-common.h"
	13	#include "km-powerpc.h"
	14
cf73639d AH	15	#ifndef MTDIDS_DEFAULT
	16	# define MTDIDS_DEFAULT "nor0=boot"
	17	#endif /* MTDIDS_DEFAULT */
	18
	19	#ifndef MTDPARTS_DEFAULT
	20	# define MTDPARTS_DEFAULT "mtdparts=" \
62ddcf05 HS	21	"boot:" \
	22	"768k(u-boot)," \
	23	"128k(env)," \
	24	"128k(envred)," \
cf73639d AH	25	"-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"
cf73639d AH	26	#endif /* MTDPARTS_DEFAULT */
62ddcf05 HS	27
	28	#define CONFIG_MISC_INIT_R
	29	/*
	30	* System Clock Setup
	31	*/
	32	#define CONFIG_83XX_CLKIN 66000000
	33	#define CONFIG_SYS_CLK_FREQ 66000000
	34	#define CONFIG_83XX_PCICLK 66000000
	35
	36	/*
	37	* IMMR new address
	38	*/
	39	#define CONFIG_SYS_IMMR 0xE0000000
	40
	41	/*
	42	* Bus Arbitration Configuration Register (ACR)
	43	*/
	44	#define CONFIG_SYS_ACR_PIPE_DEP 3 /* pipeline depth 4 transactions */
	45	#define CONFIG_SYS_ACR_RPTCNT 3 /* 4 consecutive transactions */
	46	#define CONFIG_SYS_ACR_APARK 0 /* park bus to master (below) */
	47	#define CONFIG_SYS_ACR_PARKM 3 /* parking master = QuiccEngine */
	48
	49	/*
	50	* DDR Setup
	51	*/
	52	#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */
	53	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
0f2b721c HB	54	#define CONFIG_SYS_SDRAM_BASE2 (CONFIG_SYS_SDRAM_BASE + 0x10000000) /* +256M */
0f2b721c HB	55
62ddcf05 HS	56	#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
	57	#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \| \
	58	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
	59
	60	#define CFG_83XX_DDR_USES_CS0
	61
	62	/*
	63	* Manually set up DDR parameters
	64	*/
	65	#define CONFIG_DDR_II
	66	#define CONFIG_SYS_DDR_SIZE 2048 /* MB */
	67
	68	/*
	69	* The reserved memory
	70	*/
	71	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
	72	#define CONFIG_SYS_FLASH_BASE 0xF0000000
	73
	74	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
	75	#define CONFIG_SYS_RAMBOOT
	76	#endif
	77
	78	/* Reserve 768 kB for Mon */
	79	#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
	80
	81	/*
	82	* Initial RAM Base Address Setup
	83	*/
	84	#define CONFIG_SYS_INIT_RAM_LOCK
	85	#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
	86	#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */
62ddcf05 HS	87	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
	88	GENERATED_GBL_DATA_SIZE)
	89
	90	/*
	91	* Init Local Bus Memory Controller:
	92	*
	93	* Bank Bus Machine PortSz Size Device
	94	* ---- --- ------- ------ ----- ------
	95	* 0 Local GPCM 16 bit 256MB FLASH
	96	* 1 Local GPCM 8 bit 128MB GPIO/PIGGY
	97	*
	98	*/
	99	/*
	100	* FLASH on the Local Bus
	101	*/
	102	#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
	103	#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
	104	#define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */
	105	#define CONFIG_SYS_FLASH_PROTECTION
	106	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	107
	108	#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
7d6a0982	109	#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN \| LBLAWAR_256MB)
62ddcf05 HS	110
62ddcf05 HS	111	#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \| \
7d6a0982 JH	112	BR_PS_16 \| /* 16 bit port size */ \
7d6a0982 JH	113	BR_MS_GPCM \| /* MSEL = GPCM */ \
62ddcf05 HS	114	BR_V)
	115
	116	#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \| \
	117	OR_GPCM_CSNT \| OR_GPCM_ACS_DIV2 \| \
	118	OR_GPCM_SCY_5 \| \
7d6a0982	119	OR_GPCM_TRLX_SET \| OR_GPCM_EAD)
62ddcf05 HS	120
	121	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
	122	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
	123	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
	124
	125	/*
	126	* PRIO1/PIGGY on the local bus CS1
	127	*/
8ed74341 HS	128	/* Window base at flash base */
8ed74341 HS	129	#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE
7d6a0982	130	#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN \| LBLAWAR_128MB)
62ddcf05	131
8ed74341	132	#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE \| \
7d6a0982 JH	133	BR_PS_8 \| /* 8 bit port size */ \
7d6a0982 JH	134	BR_MS_GPCM \| /* MSEL = GPCM */ \
62ddcf05	135	BR_V)
8ed74341	136	#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) \| \
62ddcf05 HS	137	OR_GPCM_CSNT \| OR_GPCM_ACS_DIV2 \| \
62ddcf05 HS	138	OR_GPCM_SCY_2 \| \
7d6a0982	139	OR_GPCM_TRLX_SET \| OR_GPCM_EAD)
62ddcf05 HS	140
	141	/*
	142	* Serial Port
	143	*/
	144	#define CONFIG_CONS_INDEX 1
62ddcf05 HS	145	#define CONFIG_SYS_NS16550_SERIAL
	146	#define CONFIG_SYS_NS16550_REG_SIZE 1
	147	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
	148
	149	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
	150	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
	151
62ddcf05 HS	152	/*
	153	* QE UEC ethernet configuration
	154	*/
	155	#define CONFIG_UEC_ETH
	156	#define CONFIG_ETHPRIME "UEC0"
	157
5bcd64cf	158	#if !defined(CONFIG_MPC8309)
62ddcf05 HS	159	#define CONFIG_UEC_ETH1 /* GETH1 */
62ddcf05 HS	160	#define UEC_VERBOSE_DEBUG 1
5bcd64cf	161	#endif
62ddcf05 HS	162
	163	#ifdef CONFIG_UEC_ETH1
	164	#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */
	165	#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
	166	#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
	167	#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
	168	#define CONFIG_SYS_UEC1_PHY_ADDR 0
	169	#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
	170	#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
	171	#endif
	172
	173	/*
	174	* Environment
	175	*/
	176
	177	#ifndef CONFIG_SYS_RAMBOOT
	178	#define CONFIG_ENV_IS_IN_FLASH
68005ea6	179	#ifndef CONFIG_ENV_ADDR
62ddcf05 HS	180	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
62ddcf05 HS	181	CONFIG_SYS_MONITOR_LEN)
68005ea6	182	#endif
62ddcf05	183	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
68005ea6	184	#ifndef CONFIG_ENV_OFFSET
62ddcf05	185	#define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN)
68005ea6	186	#endif
62ddcf05 HS	187
	188	/* Address and size of Redundant Environment Sector */
	189	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
	190	CONFIG_ENV_SECT_SIZE)
	191	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
	192
	193	#else /* CFG_SYS_RAMBOOT */
62ddcf05 HS	194	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
	195	#define CONFIG_ENV_SIZE 0x2000
	196	#endif /* CFG_SYS_RAMBOOT */
	197
	198	/* I2C */
00f792e0 HS	199	#define CONFIG_SYS_I2C
	200	#define CONFIG_SYS_NUM_I2C_BUSES 4
	201	#define CONFIG_SYS_I2C_MAX_HOPS 1
	202	#define CONFIG_SYS_I2C_FSL
	203	#define CONFIG_SYS_FSL_I2C_SPEED 200000
	204	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	205	#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
	206	#define CONFIG_SYS_I2C_OFFSET 0x3000
	207	#define CONFIG_SYS_FSL_I2C2_SPEED 200000
	208	#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
	209	#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
	210	#define CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP} }, \
	211	{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
	212	{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
	213	{1, {I2C_NULL_HOP} } }
62ddcf05	214
f3e93617	215	#define CONFIG_KM_IVM_BUS 2 /* I2C2 (Mux-Port 1)*/
62ddcf05	216
62ddcf05 HS	217	#if defined(CONFIG_CMD_NAND)
	218	#define CONFIG_NAND_KMETER1
	219	#define CONFIG_SYS_MAX_NAND_DEVICE 1
8ed74341	220	#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE
62ddcf05 HS	221	#endif
	222
	223	#if defined(CONFIG_PCI)
	224	#define CONFIG_CMD_PCI
	225	#endif
	226
	227	/*
	228	* For booting Linux, the board info and command line data
	229	* have to be in the first 8 MB of memory, since this is
	230	* the maximum mapped by the Linux kernel during initialization.
	231	*/
	232	#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
	233
	234	/*
	235	* Core HID Setup
	236	*/
	237	#define CONFIG_SYS_HID0_INIT 0x000000000
	238	#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \| \
	239	HID0_ENABLE_INSTRUCTION_CACHE)
	240	#define CONFIG_SYS_HID2 HID2_HBE
	241
	242	/*
	243	* MMU Setup
	244	*/
	245
	246	#define CONFIG_HIGH_BATS 1 /* High BATs supported */
	247
	248	/* DDR: cache cacheable */
72cd4087	249	#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \| BATL_PP_RW \| \
62ddcf05 HS	250	BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	251	#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \| BATU_BL_256M \| \
	252	BATU_VS \| BATU_VP)
	253	#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
	254	#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
	255
	256	/* IMMRBAR & PCI IO: cache-inhibit and guarded */
72cd4087	257	#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR \| BATL_PP_RW \| \
62ddcf05 HS	258	BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	259	#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR \| BATU_BL_4M \| BATU_VS \
	260	\| BATU_VP)
	261	#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
	262	#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
	263
	264	/* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */
72cd4087	265	#define CONFIG_SYS_IBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE \| BATL_PP_RW \| \
8ed74341 HS	266	BATL_MEMCOHERENCE)
	267	#define CONFIG_SYS_IBAT2U (CONFIG_SYS_KMBEC_FPGA_BASE \| BATU_BL_128M \| \
	268	BATU_VS \| BATU_VP)
72cd4087	269	#define CONFIG_SYS_DBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE \| BATL_PP_RW \| \
62ddcf05 HS	270	BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	271	#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
	272
	273	/* FLASH: icache cacheable, but dcache-inhibit and guarded */
72cd4087	274	#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE \| BATL_PP_RW \| \
62ddcf05 HS	275	BATL_MEMCOHERENCE)
	276	#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE \| BATU_BL_256M \| \
	277	BATU_VS \| BATU_VP)
72cd4087	278	#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE \| BATL_PP_RW \| \
62ddcf05 HS	279	BATL_CACHEINHIBIT \| BATL_GUARDEDSTORAGE)
	280	#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
	281
	282	/* Stack in dcache: cacheable, no memory coherence */
72cd4087	283	#define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR \| BATL_PP_RW)
62ddcf05 HS	284	#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR \| BATU_BL_128K \| \
	285	BATU_VS \| BATU_VP)
	286	#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
	287	#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
	288
	289	/*
	290	* Internal Definitions
62ddcf05	291	*/
62ddcf05 HS	292	#define BOOTFLASH_START 0xF0000000
	293
	294	#define CONFIG_KM_CONSOLE_TTY "ttyS0"
	295
	296	/*
	297	* Environment Configuration
	298	*/
	299	#define CONFIG_ENV_OVERWRITE
	300	#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */
	301	#define CONFIG_KM_DEF_ENV "km-common=empty\0"
	302	#endif
	303
b648bfc2 HB	304	#ifndef CONFIG_KM_DEF_ARCH
b648bfc2 HB	305	#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0"
62ddcf05 HS	306	#endif
	307
	308	#define CONFIG_EXTRA_ENV_SETTINGS \
	309	CONFIG_KM_DEF_ENV \
b648bfc2	310	CONFIG_KM_DEF_ARCH \
62ddcf05	311	"newenv=" \
68005ea6 VL	312	"prot off "__stringify(CONFIG_ENV_ADDR)" +0x40000 && " \
68005ea6 VL	313	"era "__stringify(CONFIG_ENV_ADDR)" +0x40000\0" \
62ddcf05 HS	314	"unlock=yes\0" \
	315	""
	316
	317	#if defined(CONFIG_UEC_ETH)
	318	#define CONFIG_HAS_ETH0
	319	#endif
	320
	321	#endif /* __CONFIG_KM83XX_H */