[people/ms/u-boot.git] / include / configs / km_kirkwood.h

/*
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 * Prafulla Wadaskar <prafulla@marvell.com>
 *
 * (C) Copyright 2009
 * Stefan Roese, DENX Software Engineering, sr@denx.de.
 *
 * (C) Copyright 2011-2012
 * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
 * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * for linking errors see
 * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
 */

#ifndef _CONFIG_KM_KIRKWOOD_H
#define _CONFIG_KM_KIRKWOOD_H

/* KM_KIRKWOOD */
#if defined(CONFIG_KM_KIRKWOOD)
#define CONFIG_HOSTNAME			km_kirkwood
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/

/* KM_KIRKWOOD_PCI */
#elif defined(CONFIG_KM_KIRKWOOD_PCI)
#define CONFIG_HOSTNAME			km_kirkwood_pci
#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_FPGA_CONFIG
#define CONFIG_KM_UBI_PART_BOOT_OPTS		",2048"
#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE

/* KM_KIRKWOOD_128M16 */
#elif defined(CONFIG_KM_KIRKWOOD_128M16)
#define CONFIG_HOSTNAME			km_kirkwood_128m16
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/

/* KM_NUSA / KM_SUGP1 */
#elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1)
#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/

# if defined(CONFIG_KM_NUSA)
#define CONFIG_HOSTNAME			kmnusa
# elif defined(CONFIG_KM_SUGP1)
#define CONFIG_HOSTNAME			kmsugp1
#define KM_PCIE_RESET_MPP7
#endif

#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
#define CONFIG_KM_FPGA_CONFIG
#define CONFIG_KM_PIGGY4_88E6352
#define CONFIG_MV88E6352_SWITCH
#define CONFIG_KM_MVEXTSW_ADDR		0x10

/* KM_MGCOGE3UN */
#elif defined(CONFIG_KM_MGCOGE3UN)
#define CONFIG_HOSTNAME			mgcoge3un
#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
#define CONFIG_KM_BOARD_EXTRA_ENV	"waitforne=true\0"
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET  3
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_PIGGY4_88E6061

/* KMCOGE5UN */
#elif defined(CONFIG_KM_COGE5UN)
#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
#undef	CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET	3
#define CONFIG_HOSTNAME			kmcoge5un
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_PIGGY4_88E6352

/* KM_PORTL2 */
#elif defined(CONFIG_KM_PORTL2)
#define CONFIG_HOSTNAME			portl2
#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_PIGGY4_88E6061

/* KM_SUV31 */
#elif defined(CONFIG_KM_SUV31)
#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
#define CONFIG_HOSTNAME			kmsuv31
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
#define CONFIG_KM_FPGA_CONFIG
#define CONFIG_KM_UBI_PART_BOOT_OPTS		",2048"
#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
#else
#error ("Board unsupported")
#endif

/* include common defines/options for all arm based Keymile boards */
#include "km/km_arm.h"

#if defined(CONFIG_KM_PIGGY4_88E6352)
/*
 * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
 * an Marvell 88E6352 simple switch.
 * In this case we have to change the default settings for the etherent mac.
 * There is NO ethernet phy. The ARM and Switch are conencted directly over
 * RGMII in MAC-MAC mode
 * In this case 1GBit full duplex and autoneg off
 */
#define PORT_SERIAL_CONTROL_VALUE		( \
	MVGBE_FORCE_LINK_PASS			    | \
	MVGBE_DIS_AUTO_NEG_FOR_DUPLX		| \
	MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL	| \
	MVGBE_ADV_NO_FLOW_CTRL			    | \
	MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX	| \
	MVGBE_FORCE_BP_MODE_NO_JAM		    | \
	(1 << 9) /* Reserved bit has to be 1 */	| \
	MVGBE_DO_NOT_FORCE_LINK_FAIL		| \
	MVGBE_DIS_AUTO_NEG_SPEED_GMII		| \
	MVGBE_DTE_ADV_0				        | \
	MVGBE_MIIPHY_MAC_MODE			    | \
	MVGBE_AUTO_NEG_NO_CHANGE		    | \
	MVGBE_MAX_RX_PACKET_1552BYTE		| \
	MVGBE_CLR_EXT_LOOPBACK			    | \
	MVGBE_SET_FULL_DUPLEX_MODE		    | \
	MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	|\
	MVGBE_SET_GMII_SPEED_TO_1000	    |\
	MVGBE_SET_MII_SPEED_TO_100)

#endif

#ifdef CONFIG_KM_PIGGY4_88E6061
/*
 * Some keymile boards like mgcoge3un have their PIGGY4 connected via
 * an Marvell 88E6061 simple switch.
 * In this case we have to change the default settings for the
 * ethernet phy connected to the kirkwood.
 * In this case 100MB full duplex and autoneg off
 */
#define PORT_SERIAL_CONTROL_VALUE		( \
	MVGBE_FORCE_LINK_PASS			| \
	MVGBE_DIS_AUTO_NEG_FOR_DUPLX		| \
	MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL	| \
	MVGBE_ADV_NO_FLOW_CTRL			| \
	MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX	| \
	MVGBE_FORCE_BP_MODE_NO_JAM		| \
	(1 << 9) /* Reserved bit has to be 1 */	| \
	MVGBE_DO_NOT_FORCE_LINK_FAIL		| \
	MVGBE_DIS_AUTO_NEG_SPEED_GMII		| \
	MVGBE_DTE_ADV_0				| \
	MVGBE_MIIPHY_MAC_MODE			| \
	MVGBE_AUTO_NEG_NO_CHANGE		| \
	MVGBE_MAX_RX_PACKET_1552BYTE		| \
	MVGBE_CLR_EXT_LOOPBACK			| \
	MVGBE_SET_FULL_DUPLEX_MODE		| \
	MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	|\
	MVGBE_SET_GMII_SPEED_TO_10_100	|\
	MVGBE_SET_MII_SPEED_TO_100)
#endif

#ifdef CONFIG_KM_DISABLE_PCI
#undef  CONFIG_KIRKWOOD_PCIE_INIT
#endif

#endif /* _CONFIG_KM_KIRKWOOD */
Commit	Line	Data
67fa8c25 HS	1	/*
	2	* (C) Copyright 2009
	3	* Marvell Semiconductor <www.marvell.com>
	4	* Prafulla Wadaskar <prafulla@marvell.com>
	5	*
	6	* (C) Copyright 2009
	7	* Stefan Roese, DENX Software Engineering, sr@denx.de.
	8	*
8170aefc HB	9	* (C) Copyright 2011-2012
	10	* Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
	11	* Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
83b40c31	12	*
1a459660	13	* SPDX-License-Identifier: GPL-2.0+
67fa8c25 HS	14	*/
	15
	16	/*
	17	* for linking errors see
	18	* http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
	19	*/
	20
83b40c31 HB	21	#ifndef _CONFIG_KM_KIRKWOOD_H
83b40c31 HB	22	#define _CONFIG_KM_KIRKWOOD_H
67fa8c25	23
48ced62c	24	/* KM_KIRKWOOD */
e29c6d04	25	#if defined(CONFIG_KM_KIRKWOOD)
d9354530	26	#define CONFIG_HOSTNAME km_kirkwood
48ced62c	27	#define CONFIG_KM_DISABLE_PCIE
f3e93617	28	#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
48ced62c HB	29
48ced62c HB	30	/* KM_KIRKWOOD_PCI */
e29c6d04	31	#elif defined(CONFIG_KM_KIRKWOOD_PCI)
d9354530	32	#define CONFIG_HOSTNAME km_kirkwood_pci
f3e93617	33	#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
48ced62c	34	#define CONFIG_KM_FPGA_CONFIG
58c90c88 HB	35	#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
58c90c88 HB	36	#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
48ced62c	37
5e4eeab9 KJ	38	/* KM_KIRKWOOD_128M16 */
5e4eeab9 KJ	39	#elif defined(CONFIG_KM_KIRKWOOD_128M16)
5e4eeab9 KJ	40	#define CONFIG_HOSTNAME km_kirkwood_128m16
5e4eeab9 KJ	41	#undef CONFIG_SYS_KWD_CONFIG
4ab3fc5e	42	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
5e4eeab9	43	#define CONFIG_KM_DISABLE_PCIE
e28d4a27	44	#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
5e4eeab9	45
9c134e18 GF	46	/* KM_NUSA / KM_SUGP1 */
9c134e18 GF	47	#elif defined(CONFIG_KM_NUSA) \|\| defined(CONFIG_KM_SUGP1)
f3e93617	48	#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
9c134e18 GF	49
9c134e18 GF	50	# if defined(CONFIG_KM_NUSA)
d9354530	51	#define CONFIG_HOSTNAME kmnusa
9c134e18	52	# elif defined(CONFIG_KM_SUGP1)
9c134e18 GF	53	#define CONFIG_HOSTNAME kmsugp1
	54	#define KM_PCIE_RESET_MPP7
	55	#endif
	56
8170aefc	57	#undef CONFIG_SYS_KWD_CONFIG
4ab3fc5e	58	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
8170aefc HB	59	#define CONFIG_KM_ENV_IS_IN_SPI_NOR
	60	#define CONFIG_KM_FPGA_CONFIG
	61	#define CONFIG_KM_PIGGY4_88E6352
be3e8be0 VL	62	#define CONFIG_MV88E6352_SWITCH
be3e8be0 VL	63	#define CONFIG_KM_MVEXTSW_ADDR 0x10
8170aefc	64
f945439a HB	65	/* KM_MGCOGE3UN */
f945439a HB	66	#elif defined(CONFIG_KM_MGCOGE3UN)
f945439a	67	#define CONFIG_HOSTNAME mgcoge3un
f3e93617	68	#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
f945439a	69	#undef CONFIG_SYS_KWD_CONFIG
4ab3fc5e	70	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
f945439a HB	71	#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0"
	72	#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
	73	#define CONFIG_KM_DISABLE_PCIE
	74	#define CONFIG_KM_PIGGY4_88E6061
	75
	76	/* KMCOGE5UN */
d9354530	77	#elif defined(CONFIG_KM_COGE5UN)
f3e93617	78	#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
d9354530	79	#undef CONFIG_SYS_KWD_CONFIG
4ab3fc5e	80	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
d9354530 HB	81	#define CONFIG_KM_ENV_IS_IN_SPI_NOR
	82	#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
	83	#define CONFIG_HOSTNAME kmcoge5un
	84	#define CONFIG_KM_DISABLE_PCIE
	85	#define CONFIG_KM_PIGGY4_88E6352
6ef64861 HB	86
	87	/* KM_PORTL2 */
	88	#elif defined(CONFIG_KM_PORTL2)
6ef64861	89	#define CONFIG_HOSTNAME portl2
f3e93617	90	#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
6ef64861 HB	91	#define CONFIG_KM_PIGGY4_88E6061
6ef64861 HB	92
90639fea HB	93	/* KM_SUV31 */
90639fea HB	94	#elif defined(CONFIG_KM_SUV31)
ea818dbb	95	#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
90639fea	96	#define CONFIG_HOSTNAME kmsuv31
2a4ebef2	97	#undef CONFIG_SYS_KWD_CONFIG
4ab3fc5e	98	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
90639fea HB	99	#define CONFIG_KM_ENV_IS_IN_SPI_NOR
90639fea HB	100	#define CONFIG_KM_FPGA_CONFIG
58c90c88 HB	101	#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
58c90c88 HB	102	#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
8170aefc HB	103	#else
8170aefc HB	104	#error ("Board unsupported")
83b40c31	105	#endif
67fa8c25	106
8170aefc HB	107	/* include common defines/options for all arm based Keymile boards */
	108	#include "km/km_arm.h"
	109
8170aefc HB	110	#if defined(CONFIG_KM_PIGGY4_88E6352)
	111	/*
	112	* Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
	113	* an Marvell 88E6352 simple switch.
	114	* In this case we have to change the default settings for the etherent mac.
	115	* There is NO ethernet phy. The ARM and Switch are conencted directly over
	116	* RGMII in MAC-MAC mode
	117	* In this case 1GBit full duplex and autoneg off
	118	*/
	119	#define PORT_SERIAL_CONTROL_VALUE ( \
	120	MVGBE_FORCE_LINK_PASS \| \
	121	MVGBE_DIS_AUTO_NEG_FOR_DUPLX \| \
	122	MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL \| \
	123	MVGBE_ADV_NO_FLOW_CTRL \| \
	124	MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX \| \
	125	MVGBE_FORCE_BP_MODE_NO_JAM \| \
	126	(1 << 9) /* Reserved bit has to be 1 */ \| \
	127	MVGBE_DO_NOT_FORCE_LINK_FAIL \| \
	128	MVGBE_DIS_AUTO_NEG_SPEED_GMII \| \
	129	MVGBE_DTE_ADV_0 \| \
	130	MVGBE_MIIPHY_MAC_MODE \| \
	131	MVGBE_AUTO_NEG_NO_CHANGE \| \
	132	MVGBE_MAX_RX_PACKET_1552BYTE \| \
	133	MVGBE_CLR_EXT_LOOPBACK \| \
	134	MVGBE_SET_FULL_DUPLEX_MODE \| \
	135	MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX \|\
	136	MVGBE_SET_GMII_SPEED_TO_1000 \|\
	137	MVGBE_SET_MII_SPEED_TO_100)
	138
	139	#endif
731b9680	140
f945439a HB	141	#ifdef CONFIG_KM_PIGGY4_88E6061
	142	/*
	143	* Some keymile boards like mgcoge3un have their PIGGY4 connected via
	144	* an Marvell 88E6061 simple switch.
	145	* In this case we have to change the default settings for the
	146	* ethernet phy connected to the kirkwood.
	147	* In this case 100MB full duplex and autoneg off
	148	*/
	149	#define PORT_SERIAL_CONTROL_VALUE ( \
	150	MVGBE_FORCE_LINK_PASS \| \
	151	MVGBE_DIS_AUTO_NEG_FOR_DUPLX \| \
	152	MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL \| \
	153	MVGBE_ADV_NO_FLOW_CTRL \| \
	154	MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX \| \
	155	MVGBE_FORCE_BP_MODE_NO_JAM \| \
	156	(1 << 9) /* Reserved bit has to be 1 */ \| \
	157	MVGBE_DO_NOT_FORCE_LINK_FAIL \| \
	158	MVGBE_DIS_AUTO_NEG_SPEED_GMII \| \
	159	MVGBE_DTE_ADV_0 \| \
	160	MVGBE_MIIPHY_MAC_MODE \| \
	161	MVGBE_AUTO_NEG_NO_CHANGE \| \
	162	MVGBE_MAX_RX_PACKET_1552BYTE \| \
	163	MVGBE_CLR_EXT_LOOPBACK \| \
	164	MVGBE_SET_FULL_DUPLEX_MODE \| \
	165	MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX \|\
	166	MVGBE_SET_GMII_SPEED_TO_10_100 \|\
	167	MVGBE_SET_MII_SPEED_TO_100)
	168	#endif
	169
f945439a HB	170	#ifdef CONFIG_KM_DISABLE_PCI
	171	#undef CONFIG_KIRKWOOD_PCIE_INIT
	172	#endif
b37f7724	173
83b40c31	174	#endif /* _CONFIG_KM_KIRKWOOD */