[people/ms/u-boot.git] / include / configs / liteboard.h

/*
 * Copyright (C) 2015 Freescale Semiconductor, Inc.
 * Copyright (C) 2016 Grinn
 *
 * Configuration settings for the Grinn liteBoard (i.MX6UL).
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __LITEBOARD_CONFIG_H
#define __LITEBOARD_CONFIG_H

#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
#include "mx6_common.h"

/* SPL options */
#include "imx6_spl.h"

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART1_BASE

/* MMC Configs */
#ifdef CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC1_BASE_ADDR
#define CONFIG_SUPPORT_EMMC_BOOT
#endif

#define CONFIG_SYS_MMC_IMG_LOAD_PART	1

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc0\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x83000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcautodetect=yes\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev};" \
	   "if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"

/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + SZ_128M)

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000

#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE		SZ_128K

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_ENV_SIZE			SZ_8K
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_SYS_MMC_ENV_PART		0
#define CONFIG_MMCROOT			"/dev/mmcblk0p2"

#define CONFIG_CMD_BMODE

/* USB Configs */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS   0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#endif

#ifdef CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define CONFIG_FEC_ENET_DEV		0

#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR		0x0
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_ETHPRIME			"FEC"

#define CONFIG_PHYLIB
#define CONFIG_PHY_SMSC
#endif

#define CONFIG_IMX_THERMAL

#endif
Commit	Line	Data
c9e40e65 MN	1	/*
	2	* Copyright (C) 2015 Freescale Semiconductor, Inc.
	3	* Copyright (C) 2016 Grinn
	4	*
	5	* Configuration settings for the Grinn liteBoard (i.MX6UL).
	6	*
	7	* SPDX-License-Identifier: GPL-2.0+
	8	*/
	9	#ifndef __LITEBOARD_CONFIG_H
	10	#define __LITEBOARD_CONFIG_H
	11
	12	#include <asm/arch/imx-regs.h>
	13	#include <linux/sizes.h>
	14	#include "mx6_common.h"
	15
	16	/* SPL options */
	17	#include "imx6_spl.h"
	18
	19	/* Size of malloc() pool */
	20	#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
	21
	22	#define CONFIG_BOARD_EARLY_INIT_F
c9e40e65 MN	23
	24	#define CONFIG_MXC_UART
	25	#define CONFIG_MXC_UART_BASE UART1_BASE
	26
	27	/* MMC Configs */
	28	#ifdef CONFIG_FSL_USDHC
	29	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
	30	#define CONFIG_SUPPORT_EMMC_BOOT
	31	#endif
	32
	33	#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
	34
	35	#define CONFIG_EXTRA_ENV_SETTINGS \
	36	"script=boot.scr\0" \
	37	"image=zImage\0" \
	38	"console=ttymxc0\0" \
	39	"fdt_high=0xffffffff\0" \
	40	"initrd_high=0xffffffff\0" \
	41	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	42	"fdt_addr=0x83000000\0" \
	43	"boot_fdt=try\0" \
	44	"ip_dyn=yes\0" \
	45	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	46	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	47	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	48	"mmcautodetect=yes\0" \
	49	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	50	"root=${mmcroot}\0" \
	51	"loadbootscript=" \
	52	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	53	"bootscript=echo Running bootscript from mmc ...; " \
	54	"source\0" \
	55	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	56	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	57	"mmcboot=echo Booting from mmc ...; " \
	58	"run mmcargs; " \
	59	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	60	"if run loadfdt; then " \
	61	"bootz ${loadaddr} - ${fdt_addr}; " \
	62	"else " \
	63	"if test ${boot_fdt} = try; then " \
	64	"bootz; " \
	65	"else " \
	66	"echo WARN: Cannot load the DT; " \
	67	"fi; " \
	68	"fi; " \
	69	"else " \
	70	"bootz; " \
	71	"fi;\0" \
	72	"netargs=setenv bootargs console=${console},${baudrate} " \
	73	"root=/dev/nfs " \
	74	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	75	"netboot=echo Booting from net ...; " \
	76	"run netargs; " \
	77	"if test ${ip_dyn} = yes; then " \
	78	"setenv get_cmd dhcp; " \
	79	"else " \
	80	"setenv get_cmd tftp; " \
	81	"fi; " \
	82	"${get_cmd} ${image}; " \
	83	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	84	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	85	"bootz ${loadaddr} - ${fdt_addr}; " \
	86	"else " \
87	"if test ${boot_fdt} = try; then " \
88	"bootz; " \
89	"else " \
90	"echo WARN: Cannot load the DT; " \
91	"fi; " \
92	"fi; " \
93	"else " \
94	"bootz; " \
95	"fi;\0"
96
97	#define CONFIG_BOOTCOMMAND \
98	"mmc dev ${mmcdev};" \
99	"if mmc rescan; then " \
100	"if run loadbootscript; then " \
101	"run bootscript; " \
102	"else " \
103	"if run loadimage; then " \
104	"run mmcboot; " \
105	"else run netboot; " \
106	"fi; " \
107	"fi; " \
108	"else run netboot; fi"
109
110	/* Miscellaneous configurable options */
111	#define CONFIG_SYS_MEMTEST_START 0x80000000
112	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_128M)
113
114	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
115	#define CONFIG_SYS_HZ 1000
116
117	#define CONFIG_CMDLINE_EDITING
118	#define CONFIG_STACKSIZE SZ_128K
119
120	/* Physical Memory Map */
121	#define CONFIG_NR_DRAM_BANKS 1
122	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
123
124	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
125	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
126	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
127
128	#define CONFIG_SYS_INIT_SP_OFFSET \
129	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
130	#define CONFIG_SYS_INIT_SP_ADDR \
131	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
132
133	/* FLASH and environment organization */
134	#define CONFIG_ENV_SIZE SZ_8K
135	#define CONFIG_ENV_IS_IN_MMC
136	#define CONFIG_ENV_OFFSET (8 * SZ_64K)
137	#define CONFIG_SYS_MMC_ENV_DEV 0
138	#define CONFIG_SYS_MMC_ENV_PART 0
139	#define CONFIG_MMCROOT "/dev/mmcblk0p2"
140
141	#define CONFIG_CMD_BMODE
142
143	/* USB Configs */
144	#ifdef CONFIG_CMD_USB
145	#define CONFIG_USB_EHCI
146	#define CONFIG_USB_EHCI_MX6
147	#define CONFIG_USB_STORAGE
148	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
149	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
150	#define CONFIG_MXC_USB_FLAGS 0
151	#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
152	#endif
153
154	#ifdef CONFIG_CMD_NET
155	#define CONFIG_FEC_MXC
156	#define CONFIG_MII
157	#define CONFIG_FEC_ENET_DEV 0
158
159	#define IMX_FEC_BASE ENET_BASE_ADDR
160	#define CONFIG_FEC_MXC_PHYADDR 0x0
161	#define CONFIG_FEC_XCV_TYPE RMII
162	#define CONFIG_ETHPRIME "FEC"
163
164	#define CONFIG_PHYLIB
165	#define CONFIG_PHY_SMSC
166	#endif
167
168	#define CONFIG_IMX_THERMAL
169
170	#endif