[people/ms/u-boot.git] / include / configs / ls1012ardb.h

/*
 * Copyright 2016 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __LS1012ARDB_H__
#define __LS1012ARDB_H__

#include "ls1012a_common.h"

/* DDR */
#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	1
#define CONFIG_NR_DRAM_BANKS		2
#define CONFIG_SYS_SDRAM_SIZE		0x40000000
#define CONFIG_CMD_MEMINFO
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		0x9fffffff


/*
 * I2C IO expander
 */

#define I2C_MUX_IO_ADDR		0x24
#define I2C_MUX_IO_0		0
#define I2C_MUX_IO_1		1
#define SW_BOOT_MASK		0x03
#define SW_BOOT_EMU		0x02
#define SW_BOOT_BANK1		0x00
#define SW_BOOT_BANK2		0x01
#define SW_REV_MASK		0xF8
#define SW_REV_A		0xF8
#define SW_REV_B		0xF0
#define SW_REV_C		0xE8
#define SW_REV_C1		0xE0
#define SW_REV_C2		0xD8
#define SW_REV_D		0xD0
#define SW_REV_E		0xC8

/*  MMC  */
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#endif

/* SATA */
#define CONFIG_SCSI_AHCI_PLAT

#define CONFIG_SYS_SATA				AHCI_BASE_ADDR

#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
#define CONFIG_SYS_SCSI_MAX_LUN			1
#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
						CONFIG_SYS_SCSI_MAX_LUN)

#define CONFIG_PCIE1		/* PCIE controller 1 */

#define CONFIG_PCI_SCAN_SHOW

#define CONFIG_CMD_MEMINFO
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		0x9fffffff

#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"verify=no\0"				\
	"fdt_high=0xffffffffffffffff\0"		\
	"initrd_high=0xffffffffffffffff\0"	\
	"fdt_addr=0x00f00000\0"			\
	"kernel_addr=0x01000000\0"		\
	"scriptaddr=0x80000000\0"		\
	"fdtheader_addr_r=0x80100000\0"		\
	"kernelheader_addr_r=0x80200000\0"	\
	"kernel_addr_r=0x81000000\0"		\
	"fdt_addr_r=0x90000000\0"		\
	"load_addr=0xa0000000\0"		\
	"kernel_size=0x2800000\0"		\
	"console=ttyS0,115200\0"		\
	BOOTENV					\
	"boot_scripts=ls1012ardb_boot.scr\0"	\
	"scan_dev_for_boot_part="		\
	     "part list ${devtype} ${devnum} devplist; "	\
	     "env exists devplist || setenv devplist 1; "	\
	     "for distro_bootpart in ${devplist}; do "		\
		  "if fstype ${devtype} "			\
		      "${devnum}:${distro_bootpart} "		\
		      "bootfstype; then "			\
		      "run scan_dev_for_boot; "	\
		  "fi; "			\
	      "done\0"				\
	"scan_dev_for_boot="				  \
		"echo Scanning ${devtype} "		  \
				"${devnum}:${distro_bootpart}...; "  \
		"for prefix in ${boot_prefixes}; do "	  \
			"run scan_dev_for_scripts; "	  \
		"done;"					  \
		"\0"					  \
	"installer=load mmc 0:2 $load_addr "	\
		   "/flex_installer_arm64.itb; "	\
		   "bootm $load_addr#$board\0"	\
	"qspi_bootcmd=echo Trying load from qspi..;"	\
		"sf probe && sf read $load_addr "	\
		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"

#undef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"

#include <asm/fsl_secure_boot.h>

#endif /* __LS1012ARDB_H__ */
Commit	Line	Data
3b6e3898 PK	1	/*
	2	* Copyright 2016 Freescale Semiconductor, Inc.
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __LS1012ARDB_H__
	8	#define __LS1012ARDB_H__
	9
	10	#include "ls1012a_common.h"
	11
b9e745bb	12	/* DDR */
3b6e3898 PK	13	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	14	#define CONFIG_CHIP_SELECTS_PER_CTRL 1
	15	#define CONFIG_NR_DRAM_BANKS 2
	16	#define CONFIG_SYS_SDRAM_SIZE 0x40000000
3b6e3898 PK	17	#define CONFIG_CMD_MEMINFO
	18	#define CONFIG_CMD_MEMTEST
	19	#define CONFIG_SYS_MEMTEST_START 0x80000000
	20	#define CONFIG_SYS_MEMTEST_END 0x9fffffff
	21
3b6e3898 PK	22
	23	/*
	24	* I2C IO expander
	25	*/
	26
481fb01f YL	27	#define I2C_MUX_IO_ADDR 0x24
	28	#define I2C_MUX_IO_0 0
	29	#define I2C_MUX_IO_1 1
	30	#define SW_BOOT_MASK 0x03
	31	#define SW_BOOT_EMU 0x02
	32	#define SW_BOOT_BANK1 0x00
	33	#define SW_BOOT_BANK2 0x01
	34	#define SW_REV_MASK 0xF8
	35	#define SW_REV_A 0xF8
	36	#define SW_REV_B 0xF0
4a47bf8a YL	37	#define SW_REV_C 0xE8
	38	#define SW_REV_C1 0xE0
	39	#define SW_REV_C2 0xD8
	40	#define SW_REV_D 0xD0
	41	#define SW_REV_E 0xC8
3b6e3898 PK	42
3b6e3898 PK	43	/* MMC */
3b6e3898 PK	44	#ifdef CONFIG_MMC
	45	#define CONFIG_FSL_ESDHC
	46	#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
3b6e3898 PK	47	#endif
	48
	49	/* SATA */
3b6e3898	50	#define CONFIG_SCSI_AHCI_PLAT
3b6e3898 PK	51
	52	#define CONFIG_SYS_SATA AHCI_BASE_ADDR
	53
	54	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
	55	#define CONFIG_SYS_SCSI_MAX_LUN 1
	56	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	57	CONFIG_SYS_SCSI_MAX_LUN)
9e0bb4c1	58
3b6e3898	59	#define CONFIG_PCIE1 /* PCIE controller 1 */
3b6e3898	60
3b6e3898	61	#define CONFIG_PCI_SCAN_SHOW
3b6e3898 PK	62
	63	#define CONFIG_CMD_MEMINFO
	64	#define CONFIG_CMD_MEMTEST
	65	#define CONFIG_SYS_MEMTEST_START 0x80000000
	66	#define CONFIG_SYS_MEMTEST_END 0x9fffffff
	67
a81357a2 RB	68	#undef CONFIG_EXTRA_ENV_SETTINGS
	69	#define CONFIG_EXTRA_ENV_SETTINGS \
	70	"verify=no\0" \
	71	"fdt_high=0xffffffffffffffff\0" \
	72	"initrd_high=0xffffffffffffffff\0" \
	73	"fdt_addr=0x00f00000\0" \
	74	"kernel_addr=0x01000000\0" \
	75	"scriptaddr=0x80000000\0" \
	76	"fdtheader_addr_r=0x80100000\0" \
	77	"kernelheader_addr_r=0x80200000\0" \
	78	"kernel_addr_r=0x81000000\0" \
	79	"fdt_addr_r=0x90000000\0" \
	80	"load_addr=0xa0000000\0" \
	81	"kernel_size=0x2800000\0" \
	82	"console=ttyS0,115200\0" \
	83	BOOTENV \
	84	"boot_scripts=ls1012ardb_boot.scr\0" \
	85	"scan_dev_for_boot_part=" \
	86	"part list ${devtype} ${devnum} devplist; " \
	87	"env exists devplist \|\| setenv devplist 1; " \
	88	"for distro_bootpart in ${devplist}; do " \
	89	"if fstype ${devtype} " \
	90	"${devnum}:${distro_bootpart} " \
	91	"bootfstype; then " \
	92	"run scan_dev_for_boot; " \
	93	"fi; " \
	94	"done\0" \
	95	"scan_dev_for_boot=" \
	96	"echo Scanning ${devtype} " \
	97	"${devnum}:${distro_bootpart}...; " \
	98	"for prefix in ${boot_prefixes}; do " \
	99	"run scan_dev_for_scripts; " \
	100	"done;" \
	101	"\0" \
	102	"installer=load mmc 0:2 $load_addr " \
	103	"/flex_installer_arm64.itb; " \
	104	"bootm $load_addr#$board\0" \
	105	"qspi_bootcmd=echo Trying load from qspi..;" \
	106	"sf probe && sf read $load_addr " \
	107	"$kernel_addr $kernel_size && bootm $load_addr#$board\0"
	108
	109	#undef CONFIG_BOOTCOMMAND
	110	#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
11d14bfb VPB	111
	112	#include <asm/fsl_secure_boot.h>
	113
3b6e3898	114	#endif /* __LS1012ARDB_H__ */