[people/ms/u-boot.git] / include / configs / ls1021atwr.h

/*
 * Copyright 2014 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_LS102XA

#define CONFIG_ARMV7_PSCI

#define CONFIG_SYS_GENERIC_BOARD

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DEEP_SLEEP
#ifdef CONFIG_DEEP_SLEEP
#define CONFIG_SILENT_CONSOLE
#endif

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 16 * 1024 * 1024)

#define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE

/*
 * USB
 */

/*
 * EHCI Support - disbaled by default as
 * there is no signal coming out of soc on
 * this board for this controller. However,
 * the silicon still has this controller,
 * and anyone can use this controller by
 * taking signals out on their board.
 */

/*#define CONFIG_HAS_FSL_DR_USB*/

#ifdef CONFIG_HAS_FSL_DR_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_FSL
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#endif

/* XHCI Support - enabled by default */
#define CONFIG_HAS_FSL_XHCI_USB

#ifdef CONFIG_HAS_FSL_XHCI_USB
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_XHCI
#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
#endif

#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_EXT2
#endif

/*
 * Generic Timer Definitions
 */
#define GENERIC_TIMER_CLK		12500000

#define CONFIG_SYS_CLK_FREQ		100000000
#define CONFIG_DDR_CLK_FREQ		100000000

#define DDR_SDRAM_CFG			0x470c0008
#define DDR_CS0_BNDS			0x008000bf
#define DDR_CS0_CONFIG			0x80014302
#define DDR_TIMING_CFG_0		0x50550004
#define DDR_TIMING_CFG_1		0xbcb38c56
#define DDR_TIMING_CFG_2		0x0040d120
#define DDR_TIMING_CFG_3		0x010e1000
#define DDR_TIMING_CFG_4		0x00000001
#define DDR_TIMING_CFG_5		0x03401400
#define DDR_SDRAM_CFG_2			0x00401010
#define DDR_SDRAM_MODE			0x00061c60
#define DDR_SDRAM_MODE_2		0x00180000
#define DDR_SDRAM_INTERVAL		0x18600618
#define DDR_DDR_WRLVL_CNTL		0x8655f605
#define DDR_DDR_WRLVL_CNTL_2		0x05060607
#define DDR_DDR_WRLVL_CNTL_3		0x05050505
#define DDR_DDR_CDR1			0x80040000
#define DDR_DDR_CDR2			0x00000001
#define DDR_SDRAM_CLK_CNTL		0x02000000
#define DDR_DDR_ZQ_CNTL			0x89080600
#define DDR_CS0_CONFIG_2		0
#define DDR_SDRAM_CFG_MEM_EN		0x80000000
#define SDRAM_CFG2_D_INIT		0x00000010
#define DDR_CDR2_VREF_TRAIN_EN		0x00000080
#define SDRAM_CFG2_FRC_SR		0x80000000
#define SDRAM_CFG_BI			0x00000001

#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI	board/freescale/ls1021atwr/ls102xa_pbi.cfg
#endif

#ifdef CONFIG_SD_BOOT
#define CONFIG_SYS_FSL_PBL_RCW	board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0xe8
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x400

#define CONFIG_SPL_TEXT_BASE		0x10000000
#define CONFIG_SPL_MAX_SIZE		0x1a000
#define CONFIG_SPL_STACK		0x1001d000
#define CONFIG_SPL_PAD_TO		0x1c000
#define CONFIG_SYS_TEXT_BASE		0x82000000

#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE + \
		CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
#define CONFIG_SPL_BSS_START_ADDR	0x80100000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
#define CONFIG_SYS_MONITOR_LEN		0x80000
#endif

#ifdef CONFIG_QSPI_BOOT
#define CONFIG_SYS_TEXT_BASE		0x40010000
#define CONFIG_SYS_NO_FLASH
#endif

#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE		0x60100000
#endif

#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			0x80000000
#define PHYS_SDRAM_SIZE			(1u * 1024 * 1024 * 1024)

#define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_SYS_HAS_SERDES

#define CONFIG_FSL_CAAM			/* Enable CAAM */

#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
	!defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
#endif

/*
 * IFC Definitions
 */
#ifndef CONFIG_QSPI_BOOT
#define CONFIG_FSL_IFC
#define CONFIG_SYS_FLASH_BASE		0x60000000
#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE

#define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
#define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
				CSPR_PORT_SIZE_16 | \
				CSPR_MSEL_NOR | \
				CSPR_V)
#define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128 * 1024 * 1024)

/* NOR Flash Timing Params */
#define CONFIG_SYS_NOR_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
					CSOR_NOR_TRHZ_80)
#define CONFIG_SYS_NOR_FTIM0		(FTIM0_NOR_TACSE(0x4) | \
					FTIM0_NOR_TEADC(0x5) | \
					FTIM0_NOR_TAVDS(0x0) | \
					FTIM0_NOR_TEAHC(0x5))
#define CONFIG_SYS_NOR_FTIM1		(FTIM1_NOR_TACO(0x35) | \
					FTIM1_NOR_TRAD_NOR(0x1A) | \
					FTIM1_NOR_TSEQRAD_NOR(0x13))
#define CONFIG_SYS_NOR_FTIM2		(FTIM2_NOR_TCS(0x4) | \
					FTIM2_NOR_TCH(0x4) | \
					FTIM2_NOR_TWP(0x1c) | \
					FTIM2_NOR_TWPH(0x0e))
#define CONFIG_SYS_NOR_FTIM3		0

#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */

#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */

#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE_PHYS }

#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
#define CONFIG_SYS_WRITE_SWAPPED_DATA
#endif

/* CPLD */

#define CONFIG_SYS_CPLD_BASE	0x7fb00000
#define CPLD_BASE_PHYS		CONFIG_SYS_CPLD_BASE

#define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
#define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
					CSPR_PORT_SIZE_8 | \
					CSPR_MSEL_GPCM | \
					CSPR_V)
#define CONFIG_SYS_FPGA_AMASK		IFC_AMASK(64 * 1024)
#define CONFIG_SYS_FPGA_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
					CSOR_NOR_NOR_MODE_AVD_NOR | \
					CSOR_NOR_TRHZ_80)

/* CPLD Timing parameters for IFC GPCM */
#define CONFIG_SYS_FPGA_FTIM0		(FTIM0_GPCM_TACSE(0xf) | \
					FTIM0_GPCM_TEADC(0xf) | \
					FTIM0_GPCM_TEAHC(0xf))
#define CONFIG_SYS_FPGA_FTIM1		(FTIM1_GPCM_TACO(0xff) | \
					FTIM1_GPCM_TRAD(0x3f))
#define CONFIG_SYS_FPGA_FTIM2		(FTIM2_GPCM_TCS(0xf) | \
					FTIM2_GPCM_TCH(0xf) | \
					FTIM2_GPCM_TWP(0xff))
#define CONFIG_SYS_FPGA_FTIM3           0x0
#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_FPGA_CSPR_EXT
#define CONFIG_SYS_CSPR1		CONFIG_SYS_FPGA_CSPR
#define CONFIG_SYS_AMASK1		CONFIG_SYS_FPGA_AMASK
#define CONFIG_SYS_CSOR1		CONFIG_SYS_FPGA_CSOR
#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_FPGA_FTIM0
#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_FPGA_FTIM1
#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_FPGA_FTIM2
#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_FPGA_FTIM3

/*
 * Serial Port
 */
#ifdef CONFIG_LPUART
#define CONFIG_FSL_LPUART
#define CONFIG_LPUART_32B_REG
#else
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
#endif

#define CONFIG_BAUDRATE			115200

/*
 * I2C
 */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */

/* EEPROM */
#ifndef CONFIG_SD_BOOT
#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_SYS_EEPROM_BUS_NUM		1
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x53
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
#endif

/*
 * MMC
 */
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC

#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

/* SPI */
#ifdef CONFIG_QSPI_BOOT
/* QSPI */
#define CONFIG_FSL_QSPI
#define QSPI0_AMBA_BASE			0x40000000
#define FSL_QSPI_FLASH_SIZE		(1 << 24)
#define FSL_QSPI_FLASH_NUM		2
#define CONFIG_SPI_FLASH_STMICRO

/* DM SPI */
#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
#define CONFIG_CMD_SF
#define CONFIG_DM_SPI_FLASH
#endif
#endif

/*
 * Video
 */
#define CONFIG_FSL_DCU_FB

#ifdef CONFIG_FSL_DCU_FB
#define CONFIG_VIDEO
#define CONFIG_CMD_BMP
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO

#define CONFIG_FSL_DCU_SII9022A
#define CONFIG_SYS_I2C_DVI_BUS_NUM	1
#define CONFIG_SYS_I2C_DVI_ADDR		0x39
#endif

/*
 * eTSEC
 */
#define CONFIG_TSEC_ENET

#ifdef CONFIG_TSEC_ENET
#define CONFIG_MII
#define CONFIG_MII_DEFAULT_TSEC		1
#define CONFIG_TSEC1			1
#define CONFIG_TSEC1_NAME		"eTSEC1"
#define CONFIG_TSEC2			1
#define CONFIG_TSEC2_NAME		"eTSEC2"
#define CONFIG_TSEC3			1
#define CONFIG_TSEC3_NAME		"eTSEC3"

#define TSEC1_PHY_ADDR			2
#define TSEC2_PHY_ADDR			0
#define TSEC3_PHY_ADDR			1

#define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC3_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)

#define TSEC1_PHYIDX			0
#define TSEC2_PHYIDX			0
#define TSEC3_PHYIDX			0

#define CONFIG_ETHPRIME			"eTSEC1"

#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_HAS_ETH2
#endif

/* PCIe */
#define CONFIG_PCI		/* Enable PCI/PCIE */
#define CONFIG_PCIE1		/* PCIE controler 1 */
#define CONFIG_PCIE2		/* PCIE controler 2 */
#define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"

#define CONFIG_SYS_PCI_64BIT

#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF	0x00000000
#define CONFIG_SYS_PCIE_CFG0_SIZE	0x00001000	/* 4k */
#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF	0x00001000
#define CONFIG_SYS_PCIE_CFG1_SIZE	0x00001000	/* 4k */

#define CONFIG_SYS_PCIE_IO_BUS		0x00000000
#define CONFIG_SYS_PCIE_IO_PHYS_OFF	0x00010000
#define CONFIG_SYS_PCIE_IO_SIZE		0x00010000	/* 64k */

#define CONFIG_SYS_PCIE_MEM_BUS		0x08000000
#define CONFIG_SYS_PCIE_MEM_PHYS_OFF	0x04000000
#define CONFIG_SYS_PCIE_MEM_SIZE	0x08000000	/* 128M */

#ifdef CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_CMD_PCI
#endif

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII

#define CONFIG_CMDLINE_TAG
#define CONFIG_CMDLINE_EDITING

#define CONFIG_ARMV7_NONSEC
#define CONFIG_ARMV7_VIRT
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LS102XA_NS_ACCESS
#define CONFIG_SMP_PEN_ADDR		0x01ee0200
#define CONFIG_TIMER_CLK_FREQ		12500000

#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE		256

#define CONFIG_FSL_DEVICE_DISABLE

#define CONFIG_BOOTDELAY		3

#ifdef CONFIG_LPUART
#define CONFIG_EXTRA_ENV_SETTINGS       \
	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
	"initrd_high=0xcfffffff\0"      \
	"fdt_high=0xcfffffff\0"
#else
#define CONFIG_EXTRA_ENV_SETTINGS	\
	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
	"initrd_high=0xcfffffff\0"      \
	"fdt_high=0xcfffffff\0"
#endif

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		\
		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_MEMINFO
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		0x9fffffff

#define CONFIG_SYS_LOAD_ADDR		0x82000000

#define CONFIG_LS102XA_STREAM_ID

/*
 * Stack sizes
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE		(30 * 1024)

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
#endif

#define CONFIG_SYS_QE_FW_ADDR     0x67f40000

/*
 * Environment
 */
#define CONFIG_ENV_OVERWRITE

#if defined(CONFIG_SD_BOOT)
#define CONFIG_ENV_OFFSET		0x100000
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_SIZE			0x20000
#elif defined(CONFIG_QSPI_BOOT)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE			0x2000
#define CONFIG_ENV_OFFSET		0x100000
#define CONFIG_ENV_SECT_SIZE		0x10000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE			0x20000
#define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
#endif

#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_CMD_BOOTZ

#define CONFIG_MISC_INIT_R

/* Hash command with SHA acceleration supported in hardware */
#define CONFIG_CMD_HASH
#define CONFIG_SHA_HW_ACCEL

#ifdef CONFIG_SECURE_BOOT
#define CONFIG_CMD_BLOB
#include <asm/fsl_secure_boot.h>
#endif

#endif
Commit	Line	Data
c8a7d9da WH	1	/*
	2	* Copyright 2014 Freescale Semiconductor, Inc.
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
c8a7d9da WH	10	#define CONFIG_LS102XA
c8a7d9da WH	11
340848b1 WD	12	#define CONFIG_ARMV7_PSCI
340848b1 WD	13
c8a7d9da WH	14	#define CONFIG_SYS_GENERIC_BOARD
	15
	16	#define CONFIG_DISPLAY_CPUINFO
	17	#define CONFIG_DISPLAY_BOARDINFO
	18
	19	#define CONFIG_SKIP_LOWLEVEL_INIT
	20	#define CONFIG_BOARD_EARLY_INIT_F
99e1bd42 TY	21	#define CONFIG_DEEP_SLEEP
	22	#ifdef CONFIG_DEEP_SLEEP
	23	#define CONFIG_SILENT_CONSOLE
	24	#endif
c8a7d9da WH	25
	26	/*
	27	* Size of malloc() pool
	28	*/
	29	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
	30
	31	#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
	32	#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
	33
10a28644 RM	34	/*
	35	* USB
	36	*/
	37
	38	/*
	39	* EHCI Support - disbaled by default as
	40	* there is no signal coming out of soc on
	41	* this board for this controller. However,
	42	* the silicon still has this controller,
	43	* and anyone can use this controller by
	44	* taking signals out on their board.
	45	*/
	46
	47	/#define CONFIG_HAS_FSL_DR_USB/
	48
	49	#ifdef CONFIG_HAS_FSL_DR_USB
	50	#define CONFIG_USB_EHCI
	51	#define CONFIG_USB_EHCI_FSL
	52	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	53	#endif
	54
	55	/* XHCI Support - enabled by default */
	56	#define CONFIG_HAS_FSL_XHCI_USB
	57
	58	#ifdef CONFIG_HAS_FSL_XHCI_USB
	59	#define CONFIG_USB_XHCI_FSL
	60	#define CONFIG_USB_XHCI_DWC3
	61	#define CONFIG_USB_XHCI
	62	#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
	63	#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
	64	#endif
	65
	66	#if defined(CONFIG_HAS_FSL_DR_USB) \|\| defined(CONFIG_HAS_FSL_XHCI_USB)
	67	#define CONFIG_CMD_USB
	68	#define CONFIG_USB_STORAGE
	69	#define CONFIG_CMD_EXT2
	70	#endif
	71
c8a7d9da WH	72	/*
	73	* Generic Timer Definitions
	74	*/
	75	#define GENERIC_TIMER_CLK 12500000
	76
	77	#define CONFIG_SYS_CLK_FREQ 100000000
	78	#define CONFIG_DDR_CLK_FREQ 100000000
	79
a88cc3bd YS	80	#define DDR_SDRAM_CFG 0x470c0008
	81	#define DDR_CS0_BNDS 0x008000bf
	82	#define DDR_CS0_CONFIG 0x80014302
	83	#define DDR_TIMING_CFG_0 0x50550004
	84	#define DDR_TIMING_CFG_1 0xbcb38c56
	85	#define DDR_TIMING_CFG_2 0x0040d120
	86	#define DDR_TIMING_CFG_3 0x010e1000
	87	#define DDR_TIMING_CFG_4 0x00000001
	88	#define DDR_TIMING_CFG_5 0x03401400
	89	#define DDR_SDRAM_CFG_2 0x00401010
	90	#define DDR_SDRAM_MODE 0x00061c60
	91	#define DDR_SDRAM_MODE_2 0x00180000
	92	#define DDR_SDRAM_INTERVAL 0x18600618
	93	#define DDR_DDR_WRLVL_CNTL 0x8655f605
	94	#define DDR_DDR_WRLVL_CNTL_2 0x05060607
	95	#define DDR_DDR_WRLVL_CNTL_3 0x05050505
	96	#define DDR_DDR_CDR1 0x80040000
	97	#define DDR_DDR_CDR2 0x00000001
	98	#define DDR_SDRAM_CLK_CNTL 0x02000000
	99	#define DDR_DDR_ZQ_CNTL 0x89080600
	100	#define DDR_CS0_CONFIG_2 0
	101	#define DDR_SDRAM_CFG_MEM_EN 0x80000000
99e1bd42 TY	102	#define SDRAM_CFG2_D_INIT 0x00000010
	103	#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
	104	#define SDRAM_CFG2_FRC_SR 0x80000000
	105	#define SDRAM_CFG_BI 0x00000001
a88cc3bd	106
8415bb68 AW	107	#ifdef CONFIG_RAMBOOT_PBL
	108	#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg
	109	#endif
	110
	111	#ifdef CONFIG_SD_BOOT
	112	#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
	113	#define CONFIG_SPL_FRAMEWORK
	114	#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
	115	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	116	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	117	#define CONFIG_SPL_ENV_SUPPORT
	118	#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
	119	#define CONFIG_SPL_I2C_SUPPORT
	120	#define CONFIG_SPL_WATCHDOG_SUPPORT
	121	#define CONFIG_SPL_SERIAL_SUPPORT
	122	#define CONFIG_SPL_MMC_SUPPORT
	123	#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
	124	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
	125
	126	#define CONFIG_SPL_TEXT_BASE 0x10000000
	127	#define CONFIG_SPL_MAX_SIZE 0x1a000
	128	#define CONFIG_SPL_STACK 0x1001d000
	129	#define CONFIG_SPL_PAD_TO 0x1c000
	130	#define CONFIG_SYS_TEXT_BASE 0x82000000
	131
99e1bd42 TY	132	#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
99e1bd42 TY	133	CONFIG_SYS_MONITOR_LEN)
8415bb68 AW	134	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
	135	#define CONFIG_SPL_BSS_START_ADDR 0x80100000
	136	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
	137	#define CONFIG_SYS_MONITOR_LEN 0x80000
	138	#endif
	139
d612f0ab AW	140	#ifdef CONFIG_QSPI_BOOT
	141	#define CONFIG_SYS_TEXT_BASE 0x40010000
	142	#define CONFIG_SYS_NO_FLASH
	143	#endif
	144
c8a7d9da	145	#ifndef CONFIG_SYS_TEXT_BASE
1c69a51c	146	#define CONFIG_SYS_TEXT_BASE 0x60100000
c8a7d9da WH	147	#endif
	148
	149	#define CONFIG_NR_DRAM_BANKS 1
	150	#define PHYS_SDRAM 0x80000000
	151	#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
	152
	153	#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
	154	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
	155
	156	#define CONFIG_SYS_HAS_SERDES
	157
4ba4a095 RG	158	#define CONFIG_FSL_CAAM /* Enable CAAM */
4ba4a095 RG	159
4c59ab9c AW	160	#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
4c59ab9c AW	161	!defined(CONFIG_QSPI_BOOT)
eaa859e7 ZQ	162	#define CONFIG_U_QE
	163	#endif
	164
c8a7d9da WH	165	/*
	166	* IFC Definitions
	167	*/
d612f0ab	168	#ifndef CONFIG_QSPI_BOOT
c8a7d9da WH	169	#define CONFIG_FSL_IFC
	170	#define CONFIG_SYS_FLASH_BASE 0x60000000
	171	#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
	172
	173	#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
	174	#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \| \
	175	CSPR_PORT_SIZE_16 \| \
	176	CSPR_MSEL_NOR \| \
	177	CSPR_V)
	178	#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
	179
	180	/* NOR Flash Timing Params */
	181	#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) \| \
	182	CSOR_NOR_TRHZ_80)
	183	#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) \| \
	184	FTIM0_NOR_TEADC(0x5) \| \
	185	FTIM0_NOR_TAVDS(0x0) \| \
	186	FTIM0_NOR_TEAHC(0x5))
	187	#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) \| \
	188	FTIM1_NOR_TRAD_NOR(0x1A) \| \
	189	FTIM1_NOR_TSEQRAD_NOR(0x13))
	190	#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) \| \
	191	FTIM2_NOR_TCH(0x4) \| \
	192	FTIM2_NOR_TWP(0x1c) \| \
	193	FTIM2_NOR_TWPH(0x0e))
	194	#define CONFIG_SYS_NOR_FTIM3 0
	195
	196	#define CONFIG_FLASH_CFI_DRIVER
	197	#define CONFIG_SYS_FLASH_CFI
	198	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	199	#define CONFIG_SYS_FLASH_QUIET_TEST
	200	#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
	201
	202	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
	203	#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
	204	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
	205	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
	206
	207	#define CONFIG_SYS_FLASH_EMPTY_INFO
	208	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
	209
	210	#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
272c5265	211	#define CONFIG_SYS_WRITE_SWAPPED_DATA
d612f0ab	212	#endif
c8a7d9da WH	213
	214	/* CPLD */
	215
	216	#define CONFIG_SYS_CPLD_BASE 0x7fb00000
	217	#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
	218
	219	#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
	220	#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) \| \
	221	CSPR_PORT_SIZE_8 \| \
	222	CSPR_MSEL_GPCM \| \
	223	CSPR_V)
	224	#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
	225	#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) \| \
	226	CSOR_NOR_NOR_MODE_AVD_NOR \| \
	227	CSOR_NOR_TRHZ_80)
	228
	229	/* CPLD Timing parameters for IFC GPCM */
	230	#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) \| \
	231	FTIM0_GPCM_TEADC(0xf) \| \
	232	FTIM0_GPCM_TEAHC(0xf))
	233	#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) \| \
	234	FTIM1_GPCM_TRAD(0x3f))
	235	#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) \| \
	236	FTIM2_GPCM_TCH(0xf) \| \
	237	FTIM2_GPCM_TWP(0xff))
	238	#define CONFIG_SYS_FPGA_FTIM3 0x0
	239	#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
	240	#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
	241	#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
	242	#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
	243	#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
	244	#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
	245	#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
	246	#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
	247	#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT
	248	#define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR
	249	#define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK
	250	#define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR
	251	#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0
	252	#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1
	253	#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2
	254	#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3
	255
	256	/*
	257	* Serial Port
	258	*/
55d53ab4 AW	259	#ifdef CONFIG_LPUART
	260	#define CONFIG_FSL_LPUART
	261	#define CONFIG_LPUART_32B_REG
	262	#else
c8a7d9da WH	263	#define CONFIG_CONS_INDEX 1
	264	#define CONFIG_SYS_NS16550
	265	#define CONFIG_SYS_NS16550_SERIAL
	266	#define CONFIG_SYS_NS16550_REG_SIZE 1
	267	#define CONFIG_SYS_NS16550_CLK get_serial_clock()
55d53ab4	268	#endif
c8a7d9da WH	269
	270	#define CONFIG_BAUDRATE 115200
	271
	272	/*
	273	* I2C
	274	*/
	275	#define CONFIG_CMD_I2C
	276	#define CONFIG_SYS_I2C
	277	#define CONFIG_SYS_I2C_MXC
f8cb101e	278	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
c8a7d9da	279
5175a288 AW	280	/* EEPROM */
	281	#ifndef CONFIG_SD_BOOT
	282	#define CONFIG_ID_EEPROM
	283	#define CONFIG_SYS_I2C_EEPROM_NXID
	284	#define CONFIG_SYS_EEPROM_BUS_NUM 1
	285	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53
	286	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	287	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	288	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
	289	#endif
	290
c8a7d9da WH	291	/*
	292	* MMC
	293	*/
	294	#define CONFIG_MMC
	295	#define CONFIG_CMD_MMC
	296	#define CONFIG_FSL_ESDHC
	297	#define CONFIG_GENERIC_MMC
	298
8251ed23 AW	299	#define CONFIG_CMD_FAT
	300	#define CONFIG_DOS_PARTITION
	301
9dd3d3c0	302	/* SPI */
d612f0ab	303	#ifdef CONFIG_QSPI_BOOT
9dd3d3c0	304	/* QSPI */
d612f0ab AW	305	#define CONFIG_FSL_QSPI
	306	#define QSPI0_AMBA_BASE 0x40000000
	307	#define FSL_QSPI_FLASH_SIZE (1 << 24)
	308	#define FSL_QSPI_FLASH_NUM 2
9dd3d3c0	309	#define CONFIG_SPI_FLASH_STMICRO
d612f0ab	310
9dd3d3c0 HW	311	/* DM SPI */
9dd3d3c0 HW	312	#if defined(CONFIG_FSL_DSPI) \|\| defined(CONFIG_FSL_QSPI)
d612f0ab	313	#define CONFIG_CMD_SF
9dd3d3c0 HW	314	#define CONFIG_DM_SPI_FLASH
9dd3d3c0 HW	315	#endif
d612f0ab AW	316	#endif
d612f0ab AW	317
b4ecc8c6 WH	318	/*
	319	* Video
	320	*/
	321	#define CONFIG_FSL_DCU_FB
	322
	323	#ifdef CONFIG_FSL_DCU_FB
	324	#define CONFIG_VIDEO
	325	#define CONFIG_CMD_BMP
	326	#define CONFIG_CFB_CONSOLE
	327	#define CONFIG_VGA_AS_SINGLE_DEVICE
	328	#define CONFIG_VIDEO_LOGO
	329	#define CONFIG_VIDEO_BMP_LOGO
	330
	331	#define CONFIG_FSL_DCU_SII9022A
	332	#define CONFIG_SYS_I2C_DVI_BUS_NUM 1
	333	#define CONFIG_SYS_I2C_DVI_ADDR 0x39
	334	#endif
	335
c8a7d9da WH	336	/*
	337	* eTSEC
	338	*/
	339	#define CONFIG_TSEC_ENET
	340
	341	#ifdef CONFIG_TSEC_ENET
	342	#define CONFIG_MII
	343	#define CONFIG_MII_DEFAULT_TSEC 1
	344	#define CONFIG_TSEC1 1
	345	#define CONFIG_TSEC1_NAME "eTSEC1"
	346	#define CONFIG_TSEC2 1
	347	#define CONFIG_TSEC2_NAME "eTSEC2"
	348	#define CONFIG_TSEC3 1
	349	#define CONFIG_TSEC3_NAME "eTSEC3"
	350
	351	#define TSEC1_PHY_ADDR 2
	352	#define TSEC2_PHY_ADDR 0
	353	#define TSEC3_PHY_ADDR 1
	354
	355	#define TSEC1_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	356	#define TSEC2_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	357	#define TSEC3_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	358
	359	#define TSEC1_PHYIDX 0
	360	#define TSEC2_PHYIDX 0
	361	#define TSEC3_PHYIDX 0
	362
	363	#define CONFIG_ETHPRIME "eTSEC1"
	364
	365	#define CONFIG_PHY_GIGE
	366	#define CONFIG_PHYLIB
	367	#define CONFIG_PHY_ATHEROS
	368
	369	#define CONFIG_HAS_ETH0
	370	#define CONFIG_HAS_ETH1
	371	#define CONFIG_HAS_ETH2
	372	#endif
	373
da419027 ML	374	/* PCIe */
	375	#define CONFIG_PCI /* Enable PCI/PCIE */
	376	#define CONFIG_PCIE1 /* PCIE controler 1 */
	377	#define CONFIG_PCIE2 /* PCIE controler 2 */
	378	#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
	379	#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
	380
180b8688 ML	381	#define CONFIG_SYS_PCI_64BIT
	382
	383	#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000
	384	#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */
	385	#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000
	386	#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */
	387
	388	#define CONFIG_SYS_PCIE_IO_BUS 0x00000000
	389	#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000
	390	#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */
	391
	392	#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000
	393	#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000
	394	#define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */
	395
	396	#ifdef CONFIG_PCI
180b8688	397	#define CONFIG_PCI_PNP
180b8688 ML	398	#define CONFIG_PCI_SCAN_SHOW
180b8688 ML	399	#define CONFIG_CMD_PCI
180b8688 ML	400	#endif
180b8688 ML	401
c8a7d9da WH	402	#define CONFIG_CMD_PING
	403	#define CONFIG_CMD_DHCP
	404	#define CONFIG_CMD_MII
c8a7d9da WH	405
	406	#define CONFIG_CMDLINE_TAG
	407	#define CONFIG_CMDLINE_EDITING
8415bb68	408
1a2826f6 XL	409	#define CONFIG_ARMV7_NONSEC
	410	#define CONFIG_ARMV7_VIRT
	411	#define CONFIG_PEN_ADDR_BIG_ENDIAN
e87f3b30	412	#define CONFIG_LS102XA_NS_ACCESS
1a2826f6 XL	413	#define CONFIG_SMP_PEN_ADDR 0x01ee0200
1a2826f6 XL	414	#define CONFIG_TIMER_CLK_FREQ 12500000
1a2826f6	415
c8a7d9da	416	#define CONFIG_HWCONFIG
03c22449 ZZ	417	#define HWCONFIG_BUFFER_SIZE 256
	418
	419	#define CONFIG_FSL_DEVICE_DISABLE
c8a7d9da WH	420
	421	#define CONFIG_BOOTDELAY 3
	422
55d53ab4 AW	423	#ifdef CONFIG_LPUART
	424	#define CONFIG_EXTRA_ENV_SETTINGS \
	425	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
	426	"initrd_high=0xcfffffff\0" \
	427	"fdt_high=0xcfffffff\0"
	428	#else
c8a7d9da WH	429	#define CONFIG_EXTRA_ENV_SETTINGS \
	430	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
	431	"initrd_high=0xcfffffff\0" \
	432	"fdt_high=0xcfffffff\0"
55d53ab4	433	#endif
c8a7d9da WH	434
	435	/*
	436	* Miscellaneous configurable options
	437	*/
	438	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	439	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	440	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
c8a7d9da WH	441	#define CONFIG_AUTO_COMPLETE
	442	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	443	#define CONFIG_SYS_PBSIZE \
	444	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	445	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	446	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	447
c8a7d9da WH	448	#define CONFIG_CMD_GREPENV
	449	#define CONFIG_CMD_MEMINFO
	450	#define CONFIG_CMD_MEMTEST
	451	#define CONFIG_SYS_MEMTEST_START 0x80000000
	452	#define CONFIG_SYS_MEMTEST_END 0x9fffffff
	453
	454	#define CONFIG_SYS_LOAD_ADDR 0x82000000
c8a7d9da	455
660673af XL	456	#define CONFIG_LS102XA_STREAM_ID
660673af XL	457
c8a7d9da WH	458	/*
	459	* Stack sizes
	460	* The stack sizes are set up in start.S using the settings below
	461	*/
	462	#define CONFIG_STACKSIZE (30 * 1024)
	463
	464	#define CONFIG_SYS_INIT_SP_OFFSET \
	465	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	466	#define CONFIG_SYS_INIT_SP_ADDR \
	467	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	468
8415bb68 AW	469	#ifdef CONFIG_SPL_BUILD
	470	#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
	471	#else
c8a7d9da	472	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
8415bb68	473	#endif
c8a7d9da	474
eaa859e7 ZQ	475	#define CONFIG_SYS_QE_FW_ADDR 0x67f40000
eaa859e7 ZQ	476
c8a7d9da WH	477	/*
	478	* Environment
	479	*/
	480	#define CONFIG_ENV_OVERWRITE
	481
8415bb68 AW	482	#if defined(CONFIG_SD_BOOT)
	483	#define CONFIG_ENV_OFFSET 0x100000
	484	#define CONFIG_ENV_IS_IN_MMC
	485	#define CONFIG_SYS_MMC_ENV_DEV 0
	486	#define CONFIG_ENV_SIZE 0x20000
d612f0ab AW	487	#elif defined(CONFIG_QSPI_BOOT)
	488	#define CONFIG_ENV_IS_IN_SPI_FLASH
	489	#define CONFIG_ENV_SIZE 0x2000
	490	#define CONFIG_ENV_OFFSET 0x100000
	491	#define CONFIG_ENV_SECT_SIZE 0x10000
8415bb68	492	#else
c8a7d9da WH	493	#define CONFIG_ENV_IS_IN_FLASH
	494	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
	495	#define CONFIG_ENV_SIZE 0x20000
	496	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
8415bb68	497	#endif
c8a7d9da WH	498
	499	#define CONFIG_OF_LIBFDT
	500	#define CONFIG_OF_BOARD_SETUP
	501	#define CONFIG_CMD_BOOTZ
	502
4ba4a095 RG	503	#define CONFIG_MISC_INIT_R
	504
	505	/* Hash command with SHA acceleration supported in hardware */
	506	#define CONFIG_CMD_HASH
	507	#define CONFIG_SHA_HW_ACCEL
	508
ba474020 RG	509	#ifdef CONFIG_SECURE_BOOT
ba474020 RG	510	#define CONFIG_CMD_BLOB
562583de	511	#include <asm/fsl_secure_boot.h>
ba474020 RG	512	#endif
ba474020 RG	513
c8a7d9da	514	#endif