projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 02b5d2ed SX |
1 | /* |
| 2 | * Copyright 2015 Freescale Semiconductor, Inc. | |
| 3 | * | |
| 4 | * SPDX-License-Identifier: GPL-2.0+ | |
| 5 | */ | |
| 6 | ||
| 7 | #ifndef __LS1043AQDS_H__ | |
| 8 | #define __LS1043AQDS_H__ | |
| 9 | ||
| 10 | #include "ls1043a_common.h" | |
| 11 | ||
| 12 | #define CONFIG_DISPLAY_CPUINFO | |
| 13 | #define CONFIG_DISPLAY_BOARDINFO | |
| 14 | ||
| 15 | #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT) | |
| 16 | #define CONFIG_SYS_TEXT_BASE 0x82000000 | |
| 17 | #else | |
| 18 | #define CONFIG_SYS_TEXT_BASE 0x60100000 | |
| 19 | #endif | |
| 20 | ||
| 21 | #ifndef __ASSEMBLY__ | |
| 22 | unsigned long get_board_sys_clk(void); | |
| 23 | unsigned long get_board_ddr_clk(void); | |
| 24 | #endif | |
| 25 | ||
| 26 | #define CONFIG_SYS_CLK_FREQ 100000000 | |
| 27 | #define CONFIG_DDR_CLK_FREQ 100000000 | |
| 28 | ||
| 29 | #define CONFIG_SKIP_LOWLEVEL_INIT | |
| 30 | ||
| 31 | #define CONFIG_LAYERSCAPE_NS_ACCESS | |
| 32 | ||
| 33 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 34 | /* Physical Memory Map */ | |
| 35 | #define CONFIG_CHIP_SELECTS_PER_CTRL 4 | |
| 58e4ad1d | 36 | #define CONFIG_NR_DRAM_BANKS 2 |
| 02b5d2ed SX |
37 | |
| 38 | #define CONFIG_DDR_SPD | |
| 39 | #define SPD_EEPROM_ADDRESS 0x51 | |
| 40 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
| 41 | ||
| 42 | #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ | |
| 43 | #ifndef CONFIG_SYS_FSL_DDR4 | |
| 44 | #define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */ | |
| 45 | #endif | |
| 46 | ||
| 47 | #define CONFIG_DDR_ECC | |
| 48 | #ifdef CONFIG_DDR_ECC | |
| 49 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
| 50 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef | |
| 51 | #endif | |
| 52 | ||
| 53 | #define CONFIG_SYS_HAS_SERDES | |
| 54 | ||
| 55 | #ifdef CONFIG_SYS_DPAA_FMAN | |
| 56 | #define CONFIG_FMAN_ENET | |
| 57 | #define CONFIG_PHYLIB | |
| 58 | #define CONFIG_PHY_VITESSE | |
| 59 | #define CONFIG_PHY_REALTEK | |
| 60 | #define CONFIG_PHYLIB_10G | |
| 61 | #define RGMII_PHY1_ADDR 0x1 | |
| 62 | #define RGMII_PHY2_ADDR 0x2 | |
| 63 | #define SGMII_CARD_PORT1_PHY_ADDR 0x1C | |
| 64 | #define SGMII_CARD_PORT2_PHY_ADDR 0x1D | |
| 65 | #define SGMII_CARD_PORT3_PHY_ADDR 0x1E | |
| 66 | #define SGMII_CARD_PORT4_PHY_ADDR 0x1F | |
| 67 | /* PHY address on QSGMII riser card on slot 1 */ | |
| 68 | #define QSGMII_CARD_PORT1_PHY_ADDR_S1 0x4 | |
| 69 | #define QSGMII_CARD_PORT2_PHY_ADDR_S1 0x5 | |
| 70 | #define QSGMII_CARD_PORT3_PHY_ADDR_S1 0x6 | |
| 71 | #define QSGMII_CARD_PORT4_PHY_ADDR_S1 0x7 | |
| 72 | /* PHY address on QSGMII riser card on slot 2 */ | |
| 73 | #define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8 | |
| 74 | #define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9 | |
| 75 | #define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA | |
| 76 | #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB | |
| 77 | #endif | |
| 78 | ||
| 79 | #ifdef CONFIG_RAMBOOT_PBL | |
| 80 | #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043aqds/ls1043aqds_pbi.cfg | |
| 81 | #endif | |
| 82 | ||
| 83 | #ifdef CONFIG_NAND_BOOT | |
| 84 | #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg | |
| 85 | #endif | |
| 86 | ||
| 87 | #ifdef CONFIG_SD_BOOT | |
| 88 | #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg | |
| 89 | #endif | |
| 90 | ||
| 989c5f0a TY |
91 | /* SATA */ |
| 92 | #define CONFIG_LIBATA | |
| 93 | #define CONFIG_SCSI_AHCI | |
| 94 | #define CONFIG_SCSI_AHCI_PLAT | |
| 95 | #define CONFIG_CMD_SCSI | |
| 96 | #define CONFIG_CMD_FAT | |
| 97 | #define CONFIG_CMD_EXT2 | |
| 98 | #define CONFIG_DOS_PARTITION | |
| 99 | #define CONFIG_BOARD_LATE_INIT | |
| 100 | ||
| 101 | #define CONFIG_SYS_SATA AHCI_BASE_ADDR | |
| 102 | ||
| 103 | #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 | |
| 104 | #define CONFIG_SYS_SCSI_MAX_LUN 1 | |
| 105 | #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ | |
| 106 | CONFIG_SYS_SCSI_MAX_LUN) | |
| 107 | ||
| 02b5d2ed SX |
108 | /* |
| 109 | * IFC Definitions | |
| 110 | */ | |
| 111 | #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) | |
| 112 | #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ | |
| 113 | CSPR_PORT_SIZE_16 | \ | |
| 114 | CSPR_MSEL_NOR | \ | |
| 115 | CSPR_V) | |
| 116 | #define CONFIG_SYS_NOR1_CSPR_EXT (0x0) | |
| 117 | #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ | |
| 118 | + 0x8000000) | \ | |
| 119 | CSPR_PORT_SIZE_16 | \ | |
| 120 | CSPR_MSEL_NOR | \ | |
| 121 | CSPR_V) | |
| 122 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) | |
| 123 | ||
| 124 | #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ | |
| 125 | CSOR_NOR_TRHZ_80) | |
| 126 | #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ | |
| 127 | FTIM0_NOR_TEADC(0x5) | \ | |
| 128 | FTIM0_NOR_TEAHC(0x5)) | |
| 129 | #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ | |
| 130 | FTIM1_NOR_TRAD_NOR(0x1a) | \ | |
| 131 | FTIM1_NOR_TSEQRAD_NOR(0x13)) | |
| 132 | #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ | |
| 133 | FTIM2_NOR_TCH(0x4) | \ | |
| 134 | FTIM2_NOR_TWPH(0xe) | \ | |
| 135 | FTIM2_NOR_TWP(0x1c)) | |
| 136 | #define CONFIG_SYS_NOR_FTIM3 0 | |
| 137 | ||
| 138 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ | |
| 139 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| 140 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 141 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 142 | ||
| 143 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 144 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS, \ | |
| 145 | CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} | |
| 146 | ||
| 147 | #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS | |
| 148 | #define CONFIG_SYS_WRITE_SWAPPED_DATA | |
| 149 | ||
| 150 | /* | |
| 151 | * NAND Flash Definitions | |
| 152 | */ | |
| 153 | #define CONFIG_NAND_FSL_IFC | |
| 154 | ||
| 155 | #define CONFIG_SYS_NAND_BASE 0x7e800000 | |
| 156 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
| 157 | ||
| 158 | #define CONFIG_SYS_NAND_CSPR_EXT (0x0) | |
| 159 | ||
| 160 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
| 161 | | CSPR_PORT_SIZE_8 \ | |
| 162 | | CSPR_MSEL_NAND \ | |
| 163 | | CSPR_V) | |
| 164 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) | |
| 165 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
| 166 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
| 167 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
| 168 | | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \ | |
| 169 | | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ | |
| 170 | | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \ | |
| 171 | | CSOR_NAND_PB(64)) /* 64 Pages Per Block */ | |
| 172 | ||
| 173 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
| 174 | ||
| 175 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x7) | \ | |
| 176 | FTIM0_NAND_TWP(0x18) | \ | |
| 177 | FTIM0_NAND_TWCHT(0x7) | \ | |
| 178 | FTIM0_NAND_TWH(0xa)) | |
| 179 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ | |
| 180 | FTIM1_NAND_TWBE(0x39) | \ | |
| 181 | FTIM1_NAND_TRR(0xe) | \ | |
| 182 | FTIM1_NAND_TRP(0x18)) | |
| 183 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0xf) | \ | |
| 184 | FTIM2_NAND_TREH(0xa) | \ | |
| 185 | FTIM2_NAND_TWHRE(0x1e)) | |
| 186 | #define CONFIG_SYS_NAND_FTIM3 0x0 | |
| 187 | ||
| 188 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
| 189 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| 190 | #define CONFIG_MTD_NAND_VERIFY_WRITE | |
| 191 | #define CONFIG_CMD_NAND | |
| 192 | ||
| 193 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 194 | ||
| 195 | #ifdef CONFIG_NAND_BOOT | |
| 196 | #define CONFIG_SPL_PAD_TO 0x20000 /* block aligned */ | |
| 197 | #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO | |
| 198 | #define CONFIG_SYS_NAND_U_BOOT_SIZE (640 << 10) | |
| 199 | #endif | |
| 200 | ||
| 201 | /* | |
| 202 | * QIXIS Definitions | |
| 203 | */ | |
| 204 | #define CONFIG_FSL_QIXIS | |
| 205 | ||
| 206 | #ifdef CONFIG_FSL_QIXIS | |
| 207 | #define QIXIS_BASE 0x7fb00000 | |
| 208 | #define QIXIS_BASE_PHYS QIXIS_BASE | |
| 209 | #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 | |
| 210 | #define QIXIS_LBMAP_SWITCH 6 | |
| 211 | #define QIXIS_LBMAP_MASK 0x0f | |
| 212 | #define QIXIS_LBMAP_SHIFT 0 | |
| 213 | #define QIXIS_LBMAP_DFLTBANK 0x00 | |
| 214 | #define QIXIS_LBMAP_ALTBANK 0x04 | |
| a4b7d68c | 215 | #define QIXIS_RST_CTL_RESET 0x41 |
| 02b5d2ed SX |
216 | #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 |
| 217 | #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 | |
| 218 | #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 | |
| 219 | ||
| 220 | #define CONFIG_SYS_FPGA_CSPR_EXT (0x0) | |
| 221 | #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ | |
| 222 | CSPR_PORT_SIZE_8 | \ | |
| 223 | CSPR_MSEL_GPCM | \ | |
| 224 | CSPR_V) | |
| 225 | #define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) | |
| 226 | #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ | |
| 227 | CSOR_NOR_NOR_MODE_AVD_NOR | \ | |
| 228 | CSOR_NOR_TRHZ_80) | |
| 229 | ||
| 230 | /* | |
| 231 | * QIXIS Timing parameters for IFC GPCM | |
| 232 | */ | |
| 233 | #define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xc) | \ | |
| 234 | FTIM0_GPCM_TEADC(0x20) | \ | |
| 235 | FTIM0_GPCM_TEAHC(0x10)) | |
| 236 | #define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0x50) | \ | |
| 237 | FTIM1_GPCM_TRAD(0x1f)) | |
| 238 | #define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0x8) | \ | |
| 239 | FTIM2_GPCM_TCH(0x8) | \ | |
| 240 | FTIM2_GPCM_TWP(0xf0)) | |
| 241 | #define CONFIG_SYS_FPGA_FTIM3 0x0 | |
| 242 | #endif | |
| 243 | ||
| 244 | #ifdef CONFIG_NAND_BOOT | |
| 245 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 246 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
| 247 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
| 248 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
| 249 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 250 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 251 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 252 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 253 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 254 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR | |
| 255 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
| 256 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
| 257 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 258 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 259 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 260 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 261 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT | |
| 262 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR | |
| 263 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK | |
| 264 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR | |
| 265 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 266 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 267 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 268 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 269 | #define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT | |
| 270 | #define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR | |
| 271 | #define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK | |
| 272 | #define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR | |
| 273 | #define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 | |
| 274 | #define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 | |
| 275 | #define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 | |
| 276 | #define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 | |
| 277 | #else | |
| 278 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT | |
| 279 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR | |
| 280 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK | |
| 281 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR | |
| 282 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 283 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 284 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 285 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 286 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT | |
| 287 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR | |
| 288 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
| 289 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
| 290 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 291 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 292 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 293 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 294 | #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT | |
| 295 | #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR | |
| 296 | #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK | |
| 297 | #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR | |
| 298 | #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 299 | #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 300 | #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 301 | #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 302 | #define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT | |
| 303 | #define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR | |
| 304 | #define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK | |
| 305 | #define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR | |
| 306 | #define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 | |
| 307 | #define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 | |
| 308 | #define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 | |
| 309 | #define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 | |
| 310 | #endif | |
| 311 | ||
| 312 | /* | |
| 313 | * I2C bus multiplexer | |
| 314 | */ | |
| 315 | #define I2C_MUX_PCA_ADDR_PRI 0x77 | |
| 316 | #define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ | |
| 317 | #define I2C_RETIMER_ADDR 0x18 | |
| 318 | #define I2C_MUX_CH_DEFAULT 0x8 | |
| 319 | #define I2C_MUX_CH_CH7301 0xC | |
| 320 | #define I2C_MUX_CH5 0xD | |
| 321 | #define I2C_MUX_CH7 0xF | |
| 322 | ||
| 323 | #define I2C_MUX_CH_VOL_MONITOR 0xa | |
| 324 | ||
| 325 | /* Voltage monitor on channel 2*/ | |
| 326 | #define I2C_VOL_MONITOR_ADDR 0x40 | |
| 327 | #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 | |
| 328 | #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 | |
| 329 | #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 | |
| 330 | ||
| 331 | #define CONFIG_VID_FLS_ENV "ls1043aqds_vdd_mv" | |
| 332 | #ifndef CONFIG_SPL_BUILD | |
| 333 | #define CONFIG_VID | |
| 334 | #endif | |
| 335 | #define CONFIG_VOL_MONITOR_IR36021_SET | |
| 336 | #define CONFIG_VOL_MONITOR_INA220 | |
| 337 | /* The lowest and highest voltage allowed for LS1043AQDS */ | |
| 338 | #define VDD_MV_MIN 819 | |
| 339 | #define VDD_MV_MAX 1212 | |
| 340 | ||
| 341 | /* | |
| 342 | * Miscellaneous configurable options | |
| 343 | */ | |
| 344 | #define CONFIG_MISC_INIT_R | |
| 345 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 346 | #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ | |
| 347 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 348 | #define CONFIG_SYS_PROMPT "=> " | |
| 349 | #define CONFIG_AUTO_COMPLETE | |
| 350 | #define CONFIG_SYS_PBSIZE \ | |
| 351 | (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) | |
| 352 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
| 353 | ||
| 354 | #define CONFIG_CMD_GREPENV | |
| 355 | #define CONFIG_CMD_MEMINFO | |
| 356 | #define CONFIG_CMD_MEMTEST | |
| 357 | #define CONFIG_SYS_MEMTEST_START 0x80000000 | |
| 358 | #define CONFIG_SYS_MEMTEST_END 0x9fffffff | |
| 359 | ||
| 360 | #define CONFIG_SYS_HZ 1000 | |
| 361 | ||
| 362 | /* | |
| 363 | * Stack sizes | |
| 364 | * The stack sizes are set up in start.S using the settings below | |
| 365 | */ | |
| 366 | #define CONFIG_STACKSIZE (30 * 1024) | |
| 367 | ||
| 368 | #define CONFIG_SYS_INIT_SP_OFFSET \ | |
| 369 | (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) | |
| 370 | ||
| 371 | #ifdef CONFIG_SPL_BUILD | |
| 372 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE | |
| 373 | #else | |
| 374 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ | |
| 375 | #endif | |
| 376 | ||
| 377 | /* | |
| 378 | * Environment | |
| 379 | */ | |
| 380 | #define CONFIG_ENV_OVERWRITE | |
| 381 | ||
| 382 | #ifdef CONFIG_NAND_BOOT | |
| 383 | #define CONFIG_ENV_IS_IN_NAND | |
| 384 | #define CONFIG_ENV_SIZE 0x2000 | |
| 385 | #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 386 | #elif defined(CONFIG_SD_BOOT) | |
| 387 | #define CONFIG_ENV_OFFSET (1024 * 1024) | |
| 388 | #define CONFIG_ENV_IS_IN_MMC | |
| 389 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| 390 | #define CONFIG_ENV_SIZE 0x2000 | |
| 391 | #else | |
| 392 | #define CONFIG_ENV_IS_IN_FLASH | |
| 393 | #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) | |
| 394 | #define CONFIG_ENV_SECT_SIZE 0x20000 | |
| 395 | #define CONFIG_ENV_SIZE 0x20000 | |
| 396 | #endif | |
| 397 | ||
| 398 | #define CONFIG_OF_LIBFDT | |
| 399 | #define CONFIG_OF_BOARD_SETUP | |
| 400 | #define CONFIG_CMD_BOOTZ | |
| 401 | #define CONFIG_CMD_MII | |
| 402 | #define CONFIG_CMDLINE_TAG | |
| 403 | ||
| 404 | #endif /* __LS1043AQDS_H__ */ |