[people/ms/u-boot.git] / include / configs / ls1088ardb.h

/*
 * Copyright 2017 NXP
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __LS1088A_RDB_H
#define __LS1088A_RDB_H

#include "ls1088a_common.h"

#define CONFIG_DISPLAY_BOARDINFO_LATE

#define CONFIG_MISC_INIT_R

#if defined(CONFIG_QSPI_BOOT)
#define CONFIG_ENV_SIZE			0x2000          /* 8KB */
#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
#define CONFIG_ENV_SECT_SIZE		0x40000
#elif defined(CONFIG_SD_BOOT)
#define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_SIZE			0x2000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
#define CONFIG_ENV_SECT_SIZE		0x20000
#define CONFIG_ENV_SIZE			0x20000
#endif

#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_QIXIS_I2C_ACCESS
#define SYS_NO_FLASH
#undef CONFIG_CMD_IMLS
#endif

#define CONFIG_SYS_CLK_FREQ		100000000
#define CONFIG_DDR_CLK_FREQ		100000000
#define COUNTER_FREQUENCY_REAL		25000000	/* 25MHz */
#define COUNTER_FREQUENCY		25000000	/* 25MHz */

#define CONFIG_DDR_SPD
#ifdef CONFIG_EMU
#define CONFIG_SYS_FSL_DDR_EMU
#define CONFIG_SYS_MXC_I2C1_SPEED	40000000
#define CONFIG_SYS_MXC_I2C2_SPEED	40000000
#else
#define CONFIG_DDR_ECC
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
#endif
#define SPD_EEPROM_ADDRESS	0x51
#define CONFIG_SYS_SPD_BUS_NUM	0	/* SPD on I2C bus 0 */
#define CONFIG_DIMM_SLOTS_PER_CTLR	1


#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
#define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128 * 1024 * 1024)
#define CONFIG_SYS_NOR_AMASK_EARLY	IFC_AMASK(64 * 1024 * 1024)

#define CONFIG_SYS_NOR0_CSPR					\
	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)		| \
	CSPR_PORT_SIZE_16					| \
	CSPR_MSEL_NOR						| \
	CSPR_V)
#define CONFIG_SYS_NOR0_CSPR_EARLY				\
	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)	| \
	CSPR_PORT_SIZE_16					| \
	CSPR_MSEL_NOR						| \
	CSPR_V)
#define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(6)
#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x1) | \
				FTIM0_NOR_TEADC(0x1) | \
				FTIM0_NOR_TEAHC(0x1))
#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x1) | \
				FTIM1_NOR_TRAD_NOR(0x1))
#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x0) | \
				FTIM2_NOR_TCH(0x0) | \
				FTIM2_NOR_TWP(0x1))
#define CONFIG_SYS_NOR_FTIM3	0x04000000
#define CONFIG_SYS_IFC_CCR	0x01000000

#ifndef SYS_NO_FLASH
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */

#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */

#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
#endif
#endif
#define CONFIG_NAND_FSL_IFC
#define CONFIG_SYS_NAND_MAX_ECCPOS	256
#define CONFIG_SYS_NAND_MAX_OOBFREE	2

#define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
				| CSPR_V)
#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64 * 1024)

#define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
				| CSOR_NAND_RAL_3	/* RAL = 3Byes */ \
				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/

#define CONFIG_SYS_NAND_ONFI_DETECTION

/* ONFI NAND Flash mode0 Timing Params */
#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
					FTIM0_NAND_TWP(0x18)   | \
					FTIM0_NAND_TWCHT(0x07) | \
					FTIM0_NAND_TWH(0x0a))
#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
					FTIM1_NAND_TWBE(0x39)  | \
					FTIM1_NAND_TRR(0x0e)   | \
					FTIM1_NAND_TRP(0x18))
#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
					FTIM2_NAND_TREH(0x0a) | \
					FTIM2_NAND_TWHRE(0x1e))
#define CONFIG_SYS_NAND_FTIM3		0x0

#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_CMD_NAND

#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)

#define CONFIG_FSL_QIXIS
#define CONFIG_SYS_I2C_FPGA_ADDR	0x66
#define QIXIS_LBMAP_SWITCH		2
#define QIXIS_QMAP_MASK			0xe0
#define QIXIS_QMAP_SHIFT		5
#define QIXIS_LBMAP_MASK		0x1f
#define QIXIS_LBMAP_SHIFT		5
#define QIXIS_LBMAP_DFLTBANK		0x00
#define QIXIS_LBMAP_ALTBANK		0x20
#define QIXIS_LBMAP_SD			0x00
#define QIXIS_LBMAP_SD_QSPI		0x00
#define QIXIS_LBMAP_QSPI		0x00
#define QIXIS_RCW_SRC_SD		0x40
#define QIXIS_RCW_SRC_QSPI		0x62
#define QIXIS_RST_CTL_RESET		0x31
#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
#define QIXIS_RCFG_CTL_RECONFIG_START	0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
#define	QIXIS_RST_FORCE_MEM		0x01

#define CONFIG_SYS_FPGA_CSPR_EXT	(0x0)
#define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
					| CSPR_PORT_SIZE_8 \
					| CSPR_MSEL_GPCM \
					| CSPR_V)
#define SYS_FPGA_CSPR_FINAL	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
					| CSPR_PORT_SIZE_8 \
					| CSPR_MSEL_GPCM \
					| CSPR_V)

#define CONFIG_SYS_FPGA_AMASK		IFC_AMASK(64*1024)
#define CONFIG_SYS_FPGA_CSOR		CSOR_GPCM_ADM_SHIFT(0)
/* QIXIS Timing parameters*/
#define SYS_FPGA_CS_FTIM0	(FTIM0_GPCM_TACSE(0x0e) | \
					FTIM0_GPCM_TEADC(0x0e) | \
					FTIM0_GPCM_TEAHC(0x0e))
#define SYS_FPGA_CS_FTIM1	(FTIM1_GPCM_TACO(0xff) | \
					FTIM1_GPCM_TRAD(0x3f))
#define SYS_FPGA_CS_FTIM2	(FTIM2_GPCM_TCS(0xf) | \
					FTIM2_GPCM_TCH(0xf) | \
					FTIM2_GPCM_TWP(0x3E))
#define SYS_FPGA_CS_FTIM3	0x0

#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
#define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_FPGA_CSPR_EXT
#define CONFIG_SYS_CSPR2		CONFIG_SYS_FPGA_CSPR
#define CONFIG_SYS_CSPR2_FINAL		SYS_FPGA_CSPR_FINAL
#define CONFIG_SYS_AMASK2		CONFIG_SYS_FPGA_AMASK
#define CONFIG_SYS_CSOR2		CONFIG_SYS_FPGA_CSOR
#define CONFIG_SYS_CS2_FTIM0		SYS_FPGA_CS_FTIM0
#define CONFIG_SYS_CS2_FTIM1		SYS_FPGA_CS_FTIM1
#define CONFIG_SYS_CS2_FTIM2		SYS_FPGA_CS_FTIM2
#define CONFIG_SYS_CS2_FTIM3		SYS_FPGA_CS_FTIM3
#else
#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
#define CONFIG_SYS_CSPR0_FINAL		CONFIG_SYS_NOR0_CSPR
#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
#endif


#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000

/*
 * I2C bus multiplexer
 */
#define I2C_MUX_PCA_ADDR_PRI		0x77
#define I2C_MUX_PCA_ADDR_SEC		0x76 /* Secondary multiplexer */
#define I2C_RETIMER_ADDR		0x18
#define I2C_MUX_CH_DEFAULT		0x8
#define I2C_MUX_CH5			0xD
/*
* RTC configuration
*/
#define RTC
#define CONFIG_RTC_PCF8563 1
#define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
#define CONFIG_CMD_DATE

/* EEPROM */
#define CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_SYS_EEPROM_BUS_NUM		0
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5

/* QSPI device */
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_FSL_QSPI
#define FSL_QSPI_FLASH_SIZE		(1 << 26)
#define FSL_QSPI_FLASH_NUM		2
#endif

#define CONFIG_CMD_MEMINFO
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		0x9fffffff

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#endif

#define CONFIG_FSL_MEMAC

/* Initial environment variables */
#if defined(CONFIG_QSPI_BOOT)
#define MC_INIT_CMD				\
	"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
	"sf read 0x80100000 0xE00000 0x100000;"				\
	"env exists secureboot && "			\
	"sf read 0x80700000 0x700000 0x40000 && "	\
	"sf read 0x80740000 0x740000 0x40000 && "	\
	"esbc_validate 0x80700000 && "			\
	"esbc_validate 0x80740000 ;"			\
	"fsl_mc start mc 0x80000000 0x80100000\0"	\
	"mcmemsize=0x70000000\0"
#elif defined(CONFIG_SD_BOOT)
#define MC_INIT_CMD				\
	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"		\
	"mmc read 0x80100000 0x7000 0x800;"				\
	"env exists secureboot && "			\
	"mmc read 0x80700000 0x3800 0x10 && "		\
	"mmc read 0x80740000 0x3A00 0x10 && "		\
	"esbc_validate 0x80700000 && "			\
	"esbc_validate 0x80740000 ;"			\
	"fsl_mc start mc 0x80000000 0x80100000\0"	\
	"mcmemsize=0x70000000\0"
#endif

#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"BOARD=ls1088ardb\0"			\
	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
	"ramdisk_addr=0x800000\0"		\
	"ramdisk_size=0x2000000\0"		\
	"fdt_high=0xa0000000\0"			\
	"initrd_high=0xffffffffffffffff\0"	\
	"fdt_addr=0x64f00000\0"			\
	"kernel_addr=0x1000000\0"		\
	"kernel_addr_sd=0x8000\0"		\
	"kernelhdr_addr_sd=0x4000\0"		\
	"kernel_start=0x580100000\0"		\
	"kernelheader_start=0x580800000\0"	\
	"scriptaddr=0x80000000\0"		\
	"scripthdraddr=0x80080000\0"		\
	"fdtheader_addr_r=0x80100000\0"		\
	"kernelheader_addr=0x800000\0"		\
	"kernelheader_addr_r=0x80200000\0"	\
	"kernel_addr_r=0x81000000\0"		\
	"kernelheader_size=0x40000\0"		\
	"fdt_addr_r=0x90000000\0"		\
	"load_addr=0xa0000000\0"		\
	"kernel_size=0x2800000\0"		\
	"kernel_size_sd=0x14000\0"		\
	"kernelhdr_size_sd=0x10\0"		\
	MC_INIT_CMD				\
	BOOTENV					\
	"boot_scripts=ls1088ardb_boot.scr\0"	\
	"boot_script_hdr=hdr_ls1088ardb_bs.out\0"	\
	"scan_dev_for_boot_part="		\
		"part list ${devtype} ${devnum} devplist; "	\
		"env exists devplist || setenv devplist 1; "	\
		"for distro_bootpart in ${devplist}; do "	\
			"if fstype ${devtype} "			\
				"${devnum}:${distro_bootpart} "	\
				"bootfstype; then "		\
				"run scan_dev_for_boot; "	\
			"fi; "					\
		"done\0"					\
	"scan_dev_for_boot="					\
		"echo Scanning ${devtype} "			\
		"${devnum}:${distro_bootpart}...; "		\
		"for prefix in ${boot_prefixes}; do "		\
			"run scan_dev_for_scripts; "		\
		"done;\0"					\
	"boot_a_script="					\
		"load ${devtype} ${devnum}:${distro_bootpart} " \
		"${scriptaddr} ${prefix}${script}; "		\
	"env exists secureboot && load ${devtype} "		\
		"${devnum}:${distro_bootpart} "			\
		"${scripthdraddr} ${prefix}${boot_script_hdr} " \
		"&& esbc_validate ${scripthdraddr};"		\
		"source ${scriptaddr}\0"			\
	"installer=load mmc 0:2 $load_addr "			\
		"/flex_installer_arm64.itb; "			\
		"env exists mcinitcmd && run mcinitcmd && "	\
		"mmc read 0x80200000 0x6800 0x800;"		\
		"fsl_mc apply dpl 0x80200000;"			\
		"bootm $load_addr#ls1088ardb\0"			\
	"qspi_bootcmd=echo Trying load from qspi..;"		\
		"sf probe && sf read $load_addr "		\
		"$kernel_addr $kernel_size ; env exists secureboot "	\
		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
		"bootm $load_addr#$BOARD\0"			\
		"sd_bootcmd=echo Trying load from sd card..;"		\
		"mmcinfo; mmc read $load_addr "			\
		"$kernel_addr_sd $kernel_size_sd ;"		\
		"env exists secureboot && mmc read $kernelheader_addr_r "\
		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
		" && esbc_validate ${kernelheader_addr_r};"	\
		"bootm $load_addr#$BOARD\0"

#undef CONFIG_BOOTCOMMAND
#if defined(CONFIG_QSPI_BOOT)
/* Try to boot an on-QSPI kernel first, then do normal distro boot */
#define CONFIG_BOOTCOMMAND                                      \
		"sf read 0x80200000 0xd00000 0x100000;"		\
		"env exists mcinitcmd && env exists secureboot "	\
		" && sf read 0x80780000 0x780000 0x100000 "	\
		"&& esbc_validate 0x80780000;env exists mcinitcmd "	\
		"&& fsl_mc apply dpl 0x80200000;"		\
		"run distro_bootcmd;run qspi_bootcmd;"		\
		"env exists secureboot && esbc_halt;"

/* Try to boot an on-SD kernel first, then do normal distro boot */
#elif defined(CONFIG_SD_BOOT)
#define CONFIG_BOOTCOMMAND                                      \
		"env exists mcinitcmd && mmcinfo; "		\
		"mmc read 0x80200000 0x6800 0x800; "		\
		"env exists mcinitcmd && env exists secureboot "	\
		" && mmc read 0x80780000 0x3800 0x10 "		\
		"&& esbc_validate 0x80780000;env exists mcinitcmd "	\
		"&& fsl_mc apply dpl 0x80200000;"		\
		"run distro_bootcmd;run sd_bootcmd;"		\
		"env exists secureboot && esbc_halt;"
#endif

/* MAC/PHY configuration */
#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_PHYLIB_10G
#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB

#define CONFIG_PHY_VITESSE
#define CONFIG_PHY_AQUANTIA
#define AQ_PHY_ADDR1			0x00
#define AQR105_IRQ_MASK			0x00000004

#define QSGMII1_PORT1_PHY_ADDR		0x0c
#define QSGMII1_PORT2_PHY_ADDR		0x0d
#define QSGMII1_PORT3_PHY_ADDR		0x0e
#define QSGMII1_PORT4_PHY_ADDR		0x0f
#define QSGMII2_PORT1_PHY_ADDR		0x1c
#define QSGMII2_PORT2_PHY_ADDR		0x1d
#define QSGMII2_PORT3_PHY_ADDR		0x1e
#define QSGMII2_PORT4_PHY_ADDR		0x1f

#define CONFIG_MII
#define CONFIG_ETHPRIME		"DPMAC1@xgmii"
#define CONFIG_PHY_GIGE
#endif

/*  MMC  */
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#endif

#undef CONFIG_CMDLINE_EDITING
#include <config_distro_defaults.h>

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(SCSI, scsi, 0) \
	func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>

#include <asm/fsl_secure_boot.h>

#endif /* __LS1088A_RDB_H */
Commit	Line	Data
e84a324b AK	1	/*
	2	* Copyright 2017 NXP
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __LS1088A_RDB_H
	8	#define __LS1088A_RDB_H
	9
	10	#include "ls1088a_common.h"
	11
	12	#define CONFIG_DISPLAY_BOARDINFO_LATE
	13
44cdb5b6 YL	14	#define CONFIG_MISC_INIT_R
44cdb5b6 YL	15
e84a324b	16	#if defined(CONFIG_QSPI_BOOT)
e84a324b AK	17	#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
	18	#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
	19	#define CONFIG_ENV_SECT_SIZE 0x40000
099f4093 AK	20	#elif defined(CONFIG_SD_BOOT)
	21	#define CONFIG_ENV_OFFSET (3 * 1024 * 1024)
	22	#define CONFIG_SYS_MMC_ENV_DEV 0
	23	#define CONFIG_ENV_SIZE 0x2000
e84a324b AK	24	#else
	25	#define CONFIG_ENV_IS_IN_FLASH
	26	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000)
	27	#define CONFIG_ENV_SECT_SIZE 0x20000
	28	#define CONFIG_ENV_SIZE 0x20000
	29	#endif
	30
099f4093	31	#if defined(CONFIG_QSPI_BOOT) \|\| defined(CONFIG_SD_BOOT_QSPI)
e84a324b AK	32	#define CONFIG_QIXIS_I2C_ACCESS
e84a324b AK	33	#define SYS_NO_FLASH
099f4093	34	#undef CONFIG_CMD_IMLS
e84a324b AK	35	#endif
	36
	37	#define CONFIG_SYS_CLK_FREQ 100000000
	38	#define CONFIG_DDR_CLK_FREQ 100000000
	39	#define COUNTER_FREQUENCY_REAL 25000000 /* 25MHz */
	40	#define COUNTER_FREQUENCY 25000000 /* 25MHz */
	41
	42	#define CONFIG_DDR_SPD
	43	#ifdef CONFIG_EMU
	44	#define CONFIG_SYS_FSL_DDR_EMU
	45	#define CONFIG_SYS_MXC_I2C1_SPEED 40000000
	46	#define CONFIG_SYS_MXC_I2C2_SPEED 40000000
	47	#else
	48	#define CONFIG_DDR_ECC
	49	#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
	50	#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
	51	#endif
	52	#define SPD_EEPROM_ADDRESS 0x51
	53	#define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */
	54	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	55
	56
	57	#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
	58	#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
	59	#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
	60	#define CONFIG_SYS_NOR_AMASK_EARLY IFC_AMASK(64 * 1024 * 1024)
	61
	62	#define CONFIG_SYS_NOR0_CSPR \
	63	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \| \
	64	CSPR_PORT_SIZE_16 \| \
	65	CSPR_MSEL_NOR \| \
	66	CSPR_V)
	67	#define CONFIG_SYS_NOR0_CSPR_EARLY \
	68	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) \| \
	69	CSPR_PORT_SIZE_16 \| \
	70	CSPR_MSEL_NOR \| \
	71	CSPR_V)
	72	#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(6)
	73	#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) \| \
	74	FTIM0_NOR_TEADC(0x1) \| \
	75	FTIM0_NOR_TEAHC(0x1))
	76	#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) \| \
	77	FTIM1_NOR_TRAD_NOR(0x1))
	78	#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) \| \
	79	FTIM2_NOR_TCH(0x0) \| \
	80	FTIM2_NOR_TWP(0x1))
	81	#define CONFIG_SYS_NOR_FTIM3 0x04000000
	82	#define CONFIG_SYS_IFC_CCR 0x01000000
	83
	84	#ifndef SYS_NO_FLASH
	85	#define CONFIG_FLASH_CFI_DRIVER
	86	#define CONFIG_SYS_FLASH_CFI
	87	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	88	#define CONFIG_SYS_FLASH_QUIET_TEST
	89	#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
	90
	91	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
	92	#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
	93	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
	94	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
	95
	96	#define CONFIG_SYS_FLASH_EMPTY_INFO
	97	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
	98	#endif
99	#endif
d798a6ee	100	#define CONFIG_NAND_FSL_IFC
e84a324b AK	101	#define CONFIG_SYS_NAND_MAX_ECCPOS 256
	102	#define CONFIG_SYS_NAND_MAX_OOBFREE 2
	103
	104	#define CONFIG_SYS_NAND_CSPR_EXT (0x0)
	105	#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
	106	\| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
	107	\| CSPR_MSEL_NAND /* MSEL = NAND */ \
	108	\| CSPR_V)
	109	#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024)
	110
	111	#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
	112	\| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
	113	\| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
	114	\| CSOR_NAND_RAL_3 /* RAL = 3Byes */ \
	115	\| CSOR_NAND_PGS_2K /* Page Size = 2K */ \
	116	\| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
	117	\| CSOR_NAND_PB(64)) /Pages Per Block = 64/
	118
	119	#define CONFIG_SYS_NAND_ONFI_DETECTION
	120
	121	/* ONFI NAND Flash mode0 Timing Params */
	122	#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) \| \
	123	FTIM0_NAND_TWP(0x18) \| \
	124	FTIM0_NAND_TWCHT(0x07) \| \
	125	FTIM0_NAND_TWH(0x0a))
	126	#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) \| \
	127	FTIM1_NAND_TWBE(0x39) \| \
	128	FTIM1_NAND_TRR(0x0e) \| \
	129	FTIM1_NAND_TRP(0x18))
	130	#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) \| \
	131	FTIM2_NAND_TREH(0x0a) \| \
	132	FTIM2_NAND_TWHRE(0x1e))
	133	#define CONFIG_SYS_NAND_FTIM3 0x0
	134
	135	#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
	136	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	137	#define CONFIG_MTD_NAND_VERIFY_WRITE
d798a6ee	138	#define CONFIG_CMD_NAND
e84a324b AK	139
	140	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
	141
	142	#define CONFIG_FSL_QIXIS
	143	#define CONFIG_SYS_I2C_FPGA_ADDR 0x66
	144	#define QIXIS_LBMAP_SWITCH 2
	145	#define QIXIS_QMAP_MASK 0xe0
	146	#define QIXIS_QMAP_SHIFT 5
	147	#define QIXIS_LBMAP_MASK 0x1f
	148	#define QIXIS_LBMAP_SHIFT 5
	149	#define QIXIS_LBMAP_DFLTBANK 0x00
	150	#define QIXIS_LBMAP_ALTBANK 0x20
	151	#define QIXIS_LBMAP_SD 0x00
	152	#define QIXIS_LBMAP_SD_QSPI 0x00
	153	#define QIXIS_LBMAP_QSPI 0x00
	154	#define QIXIS_RCW_SRC_SD 0x40
	155	#define QIXIS_RCW_SRC_QSPI 0x62
	156	#define QIXIS_RST_CTL_RESET 0x31
	157	#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
	158	#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
	159	#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
	160	#define QIXIS_RST_FORCE_MEM 0x01
	161
	162	#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
	163	#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
	164	\| CSPR_PORT_SIZE_8 \
	165	\| CSPR_MSEL_GPCM \
	166	\| CSPR_V)
	167	#define SYS_FPGA_CSPR_FINAL (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
	168	\| CSPR_PORT_SIZE_8 \
	169	\| CSPR_MSEL_GPCM \
	170	\| CSPR_V)
	171
	172	#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64*1024)
	173	#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0)
	174	/* QIXIS Timing parameters*/
	175	#define SYS_FPGA_CS_FTIM0 (FTIM0_GPCM_TACSE(0x0e) \| \
	176	FTIM0_GPCM_TEADC(0x0e) \| \
	177	FTIM0_GPCM_TEAHC(0x0e))
	178	#define SYS_FPGA_CS_FTIM1 (FTIM1_GPCM_TACO(0xff) \| \
	179	FTIM1_GPCM_TRAD(0x3f))
	180	#define SYS_FPGA_CS_FTIM2 (FTIM2_GPCM_TCS(0xf) \| \
	181	FTIM2_GPCM_TCH(0xf) \| \
	182	FTIM2_GPCM_TWP(0x3E))
	183	#define SYS_FPGA_CS_FTIM3 0x0
	184
	185	#if defined(CONFIG_QSPI_BOOT) \|\| defined(CONFIG_SD_BOOT_QSPI)
	186	#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
	187	#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
	188	#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
	189	#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
	190	#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
	191	#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
	192	#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
	193	#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
	194	#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_FPGA_CSPR_EXT
	195	#define CONFIG_SYS_CSPR2 CONFIG_SYS_FPGA_CSPR
	196	#define CONFIG_SYS_CSPR2_FINAL SYS_FPGA_CSPR_FINAL
	197	#define CONFIG_SYS_AMASK2 CONFIG_SYS_FPGA_AMASK
	198	#define CONFIG_SYS_CSOR2 CONFIG_SYS_FPGA_CSOR
	199	#define CONFIG_SYS_CS2_FTIM0 SYS_FPGA_CS_FTIM0
	200	#define CONFIG_SYS_CS2_FTIM1 SYS_FPGA_CS_FTIM1
	201	#define CONFIG_SYS_CS2_FTIM2 SYS_FPGA_CS_FTIM2
	202	#define CONFIG_SYS_CS2_FTIM3 SYS_FPGA_CS_FTIM3
203	#else
204	#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
205	#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY
206	#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR
207	#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
208	#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
209	#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
210	#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
211	#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
212	#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
213	#endif
214
215
216	#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
217
218	/*
219	* I2C bus multiplexer
220	*/
221	#define I2C_MUX_PCA_ADDR_PRI 0x77
222	#define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */
223	#define I2C_RETIMER_ADDR 0x18
224	#define I2C_MUX_CH_DEFAULT 0x8
225	#define I2C_MUX_CH5 0xD
226	/*
227	* RTC configuration
228	*/
229	#define RTC
230	#define CONFIG_RTC_PCF8563 1
231	#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/
232	#define CONFIG_CMD_DATE
233
234	/* EEPROM */
235	#define CONFIG_ID_EEPROM
236	#define CONFIG_SYS_I2C_EEPROM_NXID
237	#define CONFIG_SYS_EEPROM_BUS_NUM 0
238	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
239	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
240	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
241	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
242
243	/* QSPI device */
099f4093	244	#if defined(CONFIG_QSPI_BOOT) \|\| defined(CONFIG_SD_BOOT_QSPI)
e84a324b	245	#define CONFIG_FSL_QSPI
e84a324b AK	246	#define FSL_QSPI_FLASH_SIZE (1 << 26)
	247	#define FSL_QSPI_FLASH_NUM 2
	248	#endif
	249
	250	#define CONFIG_CMD_MEMINFO
	251	#define CONFIG_CMD_MEMTEST
	252	#define CONFIG_SYS_MEMTEST_START 0x80000000
	253	#define CONFIG_SYS_MEMTEST_END 0x9fffffff
	254
099f4093 AK	255	#ifdef CONFIG_SPL_BUILD
	256	#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
	257	#else
e84a324b	258	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
099f4093	259	#endif
e84a324b AK	260
	261	#define CONFIG_FSL_MEMAC
	262
	263	/* Initial environment variables */
	264	#if defined(CONFIG_QSPI_BOOT)
d9195c62	265	#define MC_INIT_CMD \
e84a324b	266	"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
d9195c62	267	"sf read 0x80100000 0xE00000 0x100000;" \
30c41d21 UA	268	"env exists secureboot && " \
	269	"sf read 0x80700000 0x700000 0x40000 && " \
	270	"sf read 0x80740000 0x740000 0x40000 && " \
	271	"esbc_validate 0x80700000 && " \
	272	"esbc_validate 0x80740000 ;" \
	273	"fsl_mc start mc 0x80000000 0x80100000\0" \
d9195c62	274	"mcmemsize=0x70000000\0"
099f4093	275	#elif defined(CONFIG_SD_BOOT)
d9195c62 AK	276	#define MC_INIT_CMD \
	277	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
	278	"mmc read 0x80100000 0x7000 0x800;" \
30c41d21 UA	279	"env exists secureboot && " \
	280	"mmc read 0x80700000 0x3800 0x10 && " \
	281	"mmc read 0x80740000 0x3A00 0x10 && " \
	282	"esbc_validate 0x80700000 && " \
	283	"esbc_validate 0x80740000 ;" \
	284	"fsl_mc start mc 0x80000000 0x80100000\0" \
d9195c62 AK	285	"mcmemsize=0x70000000\0"
	286	#endif
	287
099f4093 AK	288	#undef CONFIG_EXTRA_ENV_SETTINGS
099f4093 AK	289	#define CONFIG_EXTRA_ENV_SETTINGS \
d9195c62	290	"BOARD=ls1088ardb\0" \
099f4093	291	"hwconfig=fsl_ddr:bank_intlv=auto\0" \
099f4093 AK	292	"ramdisk_addr=0x800000\0" \
	293	"ramdisk_size=0x2000000\0" \
	294	"fdt_high=0xa0000000\0" \
	295	"initrd_high=0xffffffffffffffff\0" \
d9195c62 AK	296	"fdt_addr=0x64f00000\0" \
	297	"kernel_addr=0x1000000\0" \
	298	"kernel_addr_sd=0x8000\0" \
30c41d21	299	"kernelhdr_addr_sd=0x4000\0" \
d9195c62 AK	300	"kernel_start=0x580100000\0" \
	301	"kernelheader_start=0x580800000\0" \
	302	"scriptaddr=0x80000000\0" \
	303	"scripthdraddr=0x80080000\0" \
	304	"fdtheader_addr_r=0x80100000\0" \
	305	"kernelheader_addr=0x800000\0" \
	306	"kernelheader_addr_r=0x80200000\0" \
	307	"kernel_addr_r=0x81000000\0" \
	308	"kernelheader_size=0x40000\0" \
	309	"fdt_addr_r=0x90000000\0" \
	310	"load_addr=0xa0000000\0" \
	311	"kernel_size=0x2800000\0" \
	312	"kernel_size_sd=0x14000\0" \
30c41d21	313	"kernelhdr_size_sd=0x10\0" \
d9195c62 AK	314	MC_INIT_CMD \
	315	BOOTENV \
	316	"boot_scripts=ls1088ardb_boot.scr\0" \
	317	"boot_script_hdr=hdr_ls1088ardb_bs.out\0" \
	318	"scan_dev_for_boot_part=" \
	319	"part list ${devtype} ${devnum} devplist; " \
	320	"env exists devplist \|\| setenv devplist 1; " \
	321	"for distro_bootpart in ${devplist}; do " \
	322	"if fstype ${devtype} " \
	323	"${devnum}:${distro_bootpart} " \
	324	"bootfstype; then " \
	325	"run scan_dev_for_boot; " \
	326	"fi; " \
	327	"done\0" \
	328	"scan_dev_for_boot=" \
	329	"echo Scanning ${devtype} " \
	330	"${devnum}:${distro_bootpart}...; " \
	331	"for prefix in ${boot_prefixes}; do " \
	332	"run scan_dev_for_scripts; " \
	333	"done;\0" \
	334	"boot_a_script=" \
	335	"load ${devtype} ${devnum}:${distro_bootpart} " \
	336	"${scriptaddr} ${prefix}${script}; " \
	337	"env exists secureboot && load ${devtype} " \
	338	"${devnum}:${distro_bootpart} " \
	339	"${scripthdraddr} ${prefix}${boot_script_hdr} " \
	340	"&& esbc_validate ${scripthdraddr};" \
	341	"source ${scriptaddr}\0" \
	342	"installer=load mmc 0:2 $load_addr " \
	343	"/flex_installer_arm64.itb; " \
	344	"env exists mcinitcmd && run mcinitcmd && " \
	345	"mmc read 0x80200000 0x6800 0x800;" \
	346	"fsl_mc apply dpl 0x80200000;" \
	347	"bootm $load_addr#ls1088ardb\0" \
	348	"qspi_bootcmd=echo Trying load from qspi..;" \
	349	"sf probe && sf read $load_addr " \
30c41d21 UA	350	"$kernel_addr $kernel_size ; env exists secureboot " \
	351	"&& sf read $kernelheader_addr_r $kernelheader_addr " \
	352	"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
d9195c62	353	"bootm $load_addr#$BOARD\0" \
30c41d21	354	"sd_bootcmd=echo Trying load from sd card..;" \
d9195c62 AK	355	"mmcinfo; mmc read $load_addr " \
d9195c62 AK	356	"$kernel_addr_sd $kernel_size_sd ;" \
30c41d21 UA	357	"env exists secureboot && mmc read $kernelheader_addr_r "\
	358	"$kernelhdr_addr_sd $kernelhdr_size_sd " \
	359	" && esbc_validate ${kernelheader_addr_r};" \
d9195c62 AK	360	"bootm $load_addr#$BOARD\0"
	361
	362	#undef CONFIG_BOOTCOMMAND
	363	#if defined(CONFIG_QSPI_BOOT)
	364	/* Try to boot an on-QSPI kernel first, then do normal distro boot */
	365	#define CONFIG_BOOTCOMMAND \
30c41d21 UA	366	"sf read 0x80200000 0xd00000 0x100000;" \
	367	"env exists mcinitcmd && env exists secureboot " \
	368	" && sf read 0x80780000 0x780000 0x100000 " \
	369	"&& esbc_validate 0x80780000;env exists mcinitcmd " \
	370	"&& fsl_mc apply dpl 0x80200000;" \
	371	"run distro_bootcmd;run qspi_bootcmd;" \
	372	"env exists secureboot && esbc_halt;"
	373
d9195c62 AK	374	/* Try to boot an on-SD kernel first, then do normal distro boot */
	375	#elif defined(CONFIG_SD_BOOT)
	376	#define CONFIG_BOOTCOMMAND \
30c41d21 UA	377	"env exists mcinitcmd && mmcinfo; " \
	378	"mmc read 0x80200000 0x6800 0x800; " \
	379	"env exists mcinitcmd && env exists secureboot " \
	380	" && mmc read 0x80780000 0x3800 0x10 " \
	381	"&& esbc_validate 0x80780000;env exists mcinitcmd " \
	382	"&& fsl_mc apply dpl 0x80200000;" \
	383	"run distro_bootcmd;run sd_bootcmd;" \
	384	"env exists secureboot && esbc_halt;"
e84a324b AK	385	#endif
	386
	387	/* MAC/PHY configuration */
	388	#ifdef CONFIG_FSL_MC_ENET
	389	#define CONFIG_PHYLIB_10G
	390	#define CONFIG_PHY_GIGE
	391	#define CONFIG_PHYLIB
	392
	393	#define CONFIG_PHY_VITESSE
	394	#define CONFIG_PHY_AQUANTIA
	395	#define AQ_PHY_ADDR1 0x00
	396	#define AQR105_IRQ_MASK 0x00000004
	397
	398	#define QSGMII1_PORT1_PHY_ADDR 0x0c
	399	#define QSGMII1_PORT2_PHY_ADDR 0x0d
	400	#define QSGMII1_PORT3_PHY_ADDR 0x0e
	401	#define QSGMII1_PORT4_PHY_ADDR 0x0f
	402	#define QSGMII2_PORT1_PHY_ADDR 0x1c
	403	#define QSGMII2_PORT2_PHY_ADDR 0x1d
	404	#define QSGMII2_PORT3_PHY_ADDR 0x1e
	405	#define QSGMII2_PORT4_PHY_ADDR 0x1f
	406
	407	#define CONFIG_MII
	408	#define CONFIG_ETHPRIME "DPMAC1@xgmii"
	409	#define CONFIG_PHY_GIGE
	410	#endif
	411
	412	/* MMC */
	413	#ifdef CONFIG_MMC
	414	#define CONFIG_FSL_ESDHC
	415	#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
	416	#endif
	417
	418	#undef CONFIG_CMDLINE_EDITING
	419	#include <config_distro_defaults.h>
	420
	421	#define BOOT_TARGET_DEVICES(func) \
e84a324b AK	422	func(MMC, mmc, 0) \
	423	func(SCSI, scsi, 0) \
	424	func(DHCP, dhcp, na)
	425	#include <config_distro_bootcmd.h>
	426
	427	#include <asm/fsl_secure_boot.h>
	428
	429	#endif /* __LS1088A_RDB_H */