[people/ms/u-boot.git] / include / configs / lsxl.h

/*
 * Copyright (c) 2012 Michael Walle
 * Michael Walle <michael@walle.cc>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_LSXL_H
#define _CONFIG_LSXL_H

/*
 * Version number information
 */
#if defined(CONFIG_LSCHLV2)
#define CONFIG_IDENT_STRING " LS-CHLv2"
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
#define CONFIG_MACH_TYPE 3006
#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
#elif defined(CONFIG_LSXHL)
#define CONFIG_IDENT_STRING " LS-XHL"
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
#define CONFIG_MACH_TYPE 2663
/* CONFIG_SYS_TCLK is 200000000 by default */
#else
#error "unknown board"
#endif

/*
 * General configuration options
 */
#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
#define CONFIG_KW88F6281		/* SOC Name */

#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
#define CONFIG_MISC_INIT_R
#define CONFIG_SHOW_BOOT_PROGRESS

#define CONFIG_KIRKWOOD_GPIO

#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_INFO_QUIET

/*
 * Enable u-boot API for standalone programs.
 */
#define CONFIG_API

/*
 * Commands configuration
 */
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_ENV
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_IDE
#define CONFIG_CMD_FS_GENERIC

#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* loading initramfs images without uimage header */
#define CONFIG_SUPPORT_RAW_INITRD

/* ST M25P40 */
#undef CONFIG_ENV_SPI_MAX_HZ
#define CONFIG_ENV_SPI_MAX_HZ		25000000
#undef CONFIG_SF_DEFAULT_SPEED
#define CONFIG_SF_DEFAULT_SPEED		25000000

/*
 *  Environment variables configurations
 */
#ifdef CONFIG_SPI_FLASH
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	8
#define CONFIG_ENV_IS_IN_SPI_FLASH	1
#define CONFIG_ENV_SECT_SIZE		0x10000 /* 64K */
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

#define CONFIG_ENV_SIZE			0x10000 /* 64k */
#define CONFIG_ENV_OFFSET		0x70000 /* env starts here */

/*
 * Default environment variables
 */
#define CONFIG_LOADADDR		0x00800000
#define CONFIG_BOOTCOMMAND	"run bootcmd_${bootsource}"
#define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/sda2"

#if defined(CONFIG_LSXHL)
#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
#elif defined(CONFIG_LSCHLV2)
#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
#else
#error "Unsupported board"
#endif

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"bootsource=legacy\0"						\
	"hdpart=0:1\0"							\
	"kernel_addr=0x00800000\0"					\
	"ramdisk_addr=0x01000000\0"					\
	"fdt_addr=0x00ff0000\0"						\
	"bootcmd_legacy=ide reset "					\
		"&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo "	\
		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
		"&& bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"bootcmd_net=bootp ${kernel_addr} vmlinuz "			\
		"&& tftpboot ${ramdisk_addr} initrd.img "		\
		"&& setenv ramdisk_len ${filesize} "			\
		"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "		\
		"&& bootz ${kernel_addr} "				\
			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
	"bootcmd_hdd=ide reset "					\
		"&& load ide ${hdpart} ${kernel_addr} /vmlinuz "	\
		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "	\
		"&& setenv ramdisk_len ${filesize} "			\
		"&& load ide ${hdpart} ${fdt_addr} /dtb "		\
		"&& bootz ${kernel_addr} "				\
			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
	"bootcmd_usb=usb start "					\
		"&& load usb 0:1 ${kernel_addr} /vmlinuz "		\
		"&& load usb 0:1 ${ramdisk_addr} /initrd.img "		\
		"&& setenv ramdisk_len ${filesize} "			\
		"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "	\
		"&& bootz ${kernel_addr} "				\
			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
	"bootcmd_rescue=run config_nc_dhcp; run nc\0"			\
	"eraseenv=sf probe 0 "						\
		"&& sf erase " __stringify(CONFIG_ENV_OFFSET)		\
			" +" __stringify(CONFIG_ENV_SIZE) "\0"		\
	"config_nc_dhcp=setenv autoload_old ${autoload}; "		\
		"setenv autoload no "					\
		"&& bootp "						\
		"&& setenv ncip "					\
		"&& setenv autoload ${autoload_old}; "			\
		"setenv autoload_old\0"					\
	"standard_env=setenv ipaddr; setenv netmask; setenv serverip; "	\
		"setenv ncip; setenv gatewayip; setenv ethact; "	\
		"setenv bootfile; setenv dnsip; "			\
		"setenv bootsource legacy; run ser\0"			\
	"restore_env=run standard_env; saveenv; reset\0"		\
	"ser=setenv stdin serial; setenv stdout serial; "		\
		"setenv stderr serial\0"				\
	"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"	\
	"stdin=serial\0"						\
	"stdout=serial\0"						\
	"stderr=serial\0"

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS		{0, 1} /* enable port 1 only */
#define CONFIG_PHY_BASE_ADR		7
#undef CONFIG_RESET_PHY_R
#endif /* CONFIG_CMD_NET */

#ifdef CONFIG_CMD_IDE
#undef CONFIG_IDE_LED
#undef CONFIG_SYS_IDE_MAXBUS
#define CONFIG_SYS_IDE_MAXBUS		1
#undef CONFIG_SYS_IDE_MAXDEVICE
#define CONFIG_SYS_IDE_MAXDEVICE	1
#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_64BIT_LBA
#endif

#endif /* _CONFIG_LSXL_H */
Commit	Line	Data
f214a20e MW	1	/*
	2	* Copyright (c) 2012 Michael Walle
	3	* Michael Walle <michael@walle.cc>
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
f214a20e MW	6	*/
	7
	8	#ifndef _CONFIG_LSXL_H
	9	#define _CONFIG_LSXL_H
	10
	11	/*
	12	* Version number information
	13	*/
	14	#if defined(CONFIG_LSCHLV2)
	15	#define CONFIG_IDENT_STRING " LS-CHLv2"
4ab3fc5e	16	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
f214a20e MW	17	#define CONFIG_MACH_TYPE 3006
	18	#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
	19	#elif defined(CONFIG_LSXHL)
	20	#define CONFIG_IDENT_STRING " LS-XHL"
4ab3fc5e	21	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
f214a20e MW	22	#define CONFIG_MACH_TYPE 2663
	23	/* CONFIG_SYS_TCLK is 200000000 by default */
	24	#else
	25	#error "unknown board"
	26	#endif
	27
	28	/*
	29	* General configuration options
	30	*/
	31	#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
f214a20e MW	32	#define CONFIG_KW88F6281 /* SOC Name */
	33
	34	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	35	#define CONFIG_MISC_INIT_R
	36	#define CONFIG_SHOW_BOOT_PROGRESS
	37
f214a20e	38	#define CONFIG_KIRKWOOD_GPIO
f214a20e MW	39
f214a20e MW	40	#define CONFIG_SYS_NO_FLASH
f214a20e MW	41	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	42	#define CONFIG_SYS_CONSOLE_INFO_QUIET
	43
	44	/*
	45	* Enable u-boot API for standalone programs.
	46	*/
	47	#define CONFIG_API
	48
	49	/*
	50	* Commands configuration
	51	*/
4fe49d7b	52	#define CONFIG_CMD_BOOTZ
f214a20e MW	53	#define CONFIG_CMD_ENV
	54	#define CONFIG_CMD_EXT2
	55	#define CONFIG_CMD_FAT
	56	#define CONFIG_CMD_IDE
848fe239	57	#define CONFIG_CMD_FS_GENERIC
f214a20e MW	58
	59	#define CONFIG_DOS_PARTITION
	60	#define CONFIG_EFI_PARTITION
	61
	62	/*
	63	* mv-common.h should be defined after CMD configs since it used them
	64	* to enable certain macros
	65	*/
	66	#include "mv-common.h"
	67
4fe49d7b MW	68	/* loading initramfs images without uimage header */
	69	#define CONFIG_SUPPORT_RAW_INITRD
	70
f214a20e	71	/* ST M25P40 */
f214a20e MW	72	#undef CONFIG_ENV_SPI_MAX_HZ
	73	#define CONFIG_ENV_SPI_MAX_HZ 25000000
	74	#undef CONFIG_SF_DEFAULT_SPEED
	75	#define CONFIG_SF_DEFAULT_SPEED 25000000
	76
f214a20e MW	77	/*
	78	* Environment variables configurations
	79	*/
	80	#ifdef CONFIG_SPI_FLASH
	81	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	82	#define CONFIG_SYS_MAX_FLASH_SECT 8
	83	#define CONFIG_ENV_IS_IN_SPI_FLASH 1
	84	#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */
	85	#else
	86	#define CONFIG_ENV_IS_NOWHERE
	87	#endif
	88
	89	#define CONFIG_ENV_SIZE 0x10000 /* 64k */
	90	#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
	91
	92	/*
	93	* Default environment variables
	94	*/
	95	#define CONFIG_LOADADDR 0x00800000
	96	#define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}"
	97	#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2"
848fe239 MW	98
	99	#if defined(CONFIG_LSXHL)
	100	#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
	101	#elif defined(CONFIG_LSCHLV2)
	102	#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
	103	#else
	104	#error "Unsupported board"
	105	#endif
	106
f214a20e	107	#define CONFIG_EXTRA_ENV_SETTINGS \
848fe239	108	"bootsource=legacy\0" \
f214a20e	109	"hdpart=0:1\0" \
848fe239 MW	110	"kernel_addr=0x00800000\0" \
848fe239 MW	111	"ramdisk_addr=0x01000000\0" \
145df6fe	112	"fdt_addr=0x00ff0000\0" \
848fe239	113	"bootcmd_legacy=ide reset " \
bc2ad9f0 MW	114	"&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
	115	"&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
	116	"&& bootm ${kernel_addr} ${ramdisk_addr}\0" \
4fe49d7b MW	117	"bootcmd_net=bootp ${kernel_addr} vmlinuz " \
	118	"&& tftpboot ${ramdisk_addr} initrd.img " \
	119	"&& setenv ramdisk_len ${filesize} " \
848fe239	120	"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \
4fe49d7b MW	121	"&& bootz ${kernel_addr} " \
4fe49d7b MW	122	"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
f214a20e	123	"bootcmd_hdd=ide reset " \
4fe49d7b MW	124	"&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \
	125	"&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \
	126	"&& setenv ramdisk_len ${filesize} " \
	127	"&& load ide ${hdpart} ${fdt_addr} /dtb " \
	128	"&& bootz ${kernel_addr} " \
	129	"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
f214a20e	130	"bootcmd_usb=usb start " \
4fe49d7b MW	131	"&& load usb 0:1 ${kernel_addr} /vmlinuz " \
	132	"&& load usb 0:1 ${ramdisk_addr} /initrd.img " \
	133	"&& setenv ramdisk_len ${filesize} " \
	134	"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \
	135	"&& bootz ${kernel_addr} " \
	136	"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
f214a20e MW	137	"bootcmd_rescue=run config_nc_dhcp; run nc\0" \
f214a20e MW	138	"eraseenv=sf probe 0 " \
5368c55d MV	139	"&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
5368c55d MV	140	" +" __stringify(CONFIG_ENV_SIZE) "\0" \
f214a20e MW	141	"config_nc_dhcp=setenv autoload_old ${autoload}; " \
	142	"setenv autoload no " \
	143	"&& bootp " \
23c9946a	144	"&& setenv ncip " \
f214a20e MW	145	"&& setenv autoload ${autoload_old}; " \
	146	"setenv autoload_old\0" \
	147	"standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
	148	"setenv ncip; setenv gatewayip; setenv ethact; " \
	149	"setenv bootfile; setenv dnsip; " \
45e60c25	150	"setenv bootsource legacy; run ser\0" \
f214a20e MW	151	"restore_env=run standard_env; saveenv; reset\0" \
	152	"ser=setenv stdin serial; setenv stdout serial; " \
	153	"setenv stderr serial\0" \
	154	"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
	155	"stdin=serial\0" \
	156	"stdout=serial\0" \
	157	"stderr=serial\0"
	158
	159	/*
	160	* Ethernet Driver configuration
	161	*/
	162	#ifdef CONFIG_CMD_NET
	163	#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
	164	#define CONFIG_PHY_BASE_ADR 7
	165	#undef CONFIG_RESET_PHY_R
	166	#endif /* CONFIG_CMD_NET */
	167
	168	#ifdef CONFIG_CMD_IDE
	169	#undef CONFIG_IDE_LED
	170	#undef CONFIG_SYS_IDE_MAXBUS
	171	#define CONFIG_SYS_IDE_MAXBUS 1
	172	#undef CONFIG_SYS_IDE_MAXDEVICE
	173	#define CONFIG_SYS_IDE_MAXDEVICE 1
	174	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
9e5f060e	175	#define CONFIG_SYS_64BIT_LBA
f214a20e MW	176	#endif
	177
	178	#endif /* _CONFIG_LSXL_H */