[people/ms/u-boot.git] / include / configs / lsxl.h

/*
 * Copyright (c) 2012 Michael Walle
 * Michael Walle <michael@walle.cc>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_LSXL_H
#define _CONFIG_LSXL_H


/*
 * Version number information
 */
#if defined(CONFIG_LSCHLV2)
#define CONFIG_IDENT_STRING " LS-CHLv2"
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
#define CONFIG_MACH_TYPE 3006
#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
#elif defined(CONFIG_LSXHL)
#define CONFIG_IDENT_STRING " LS-XHL"
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
#define CONFIG_MACH_TYPE 2663
/* CONFIG_SYS_TCLK is 200000000 by default */
#else
#error "unknown board"
#endif

/*
 * General configuration options
 */
#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
#define CONFIG_KW88F6281		/* SOC Name */

#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
#define CONFIG_MISC_INIT_R
#define CONFIG_SHOW_BOOT_PROGRESS

#define CONFIG_KIRKWOOD_GPIO

#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_INFO_QUIET

/*
 * Enable u-boot API for standalone programs.
 */
#define CONFIG_API

/*
 * Commands configuration
 */
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_IDE
#define CONFIG_CMD_PING
#define CONFIG_CMD_PING
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB
#define CONFIG_CMD_FS_GENERIC

#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* loading initramfs images without uimage header */
#define CONFIG_SUPPORT_RAW_INITRD

/* ST M25P40 */
#undef CONFIG_ENV_SPI_MAX_HZ
#define CONFIG_ENV_SPI_MAX_HZ		25000000
#undef CONFIG_SF_DEFAULT_SPEED
#define CONFIG_SF_DEFAULT_SPEED		25000000


#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "

/*
 *  Environment variables configurations
 */
#ifdef CONFIG_SPI_FLASH
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	8
#define CONFIG_ENV_IS_IN_SPI_FLASH	1
#define CONFIG_ENV_SECT_SIZE		0x10000 /* 64K */
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

#define CONFIG_ENV_SIZE			0x10000 /* 64k */
#define CONFIG_ENV_OFFSET		0x70000 /* env starts here */

/*
 * Default environment variables
 */
#define CONFIG_LOADADDR		0x00800000
#define CONFIG_BOOTCOMMAND	"run bootcmd_${bootsource}"
#define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/sda2"

#if defined(CONFIG_LSXHL)
#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
#elif defined(CONFIG_LSCHLV2)
#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
#else
#error "Unsupported board"
#endif

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"bootsource=legacy\0"						\
	"hdpart=0:1\0"							\
	"kernel_addr=0x00800000\0"					\
	"ramdisk_addr=0x01000000\0"					\
	"fdt_addr=0x00ff0000\0"						\
	"bootcmd_legacy=ide reset "					\
		"&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo "	\
		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
		"&& bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"bootcmd_net=bootp ${kernel_addr} vmlinuz "			\
		"&& tftpboot ${ramdisk_addr} initrd.img "		\
		"&& setenv ramdisk_len ${filesize} "			\
		"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "		\
		"&& bootz ${kernel_addr} "				\
			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
	"bootcmd_hdd=ide reset "					\
		"&& load ide ${hdpart} ${kernel_addr} /vmlinuz "	\
		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "	\
		"&& setenv ramdisk_len ${filesize} "			\
		"&& load ide ${hdpart} ${fdt_addr} /dtb "		\
		"&& bootz ${kernel_addr} "				\
			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
	"bootcmd_usb=usb start "					\
		"&& load usb 0:1 ${kernel_addr} /vmlinuz "		\
		"&& load usb 0:1 ${ramdisk_addr} /initrd.img "		\
		"&& setenv ramdisk_len ${filesize} "			\
		"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "	\
		"&& bootz ${kernel_addr} "				\
			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
	"bootcmd_rescue=run config_nc_dhcp; run nc\0"			\
	"eraseenv=sf probe 0 "						\
		"&& sf erase " __stringify(CONFIG_ENV_OFFSET)		\
			" +" __stringify(CONFIG_ENV_SIZE) "\0"		\
	"config_nc_dhcp=setenv autoload_old ${autoload}; "		\
		"setenv autoload no "					\
		"&& bootp "						\
		"&& setenv ncip "					\
		"&& setenv autoload ${autoload_old}; "			\
		"setenv autoload_old\0"					\
	"standard_env=setenv ipaddr; setenv netmask; setenv serverip; "	\
		"setenv ncip; setenv gatewayip; setenv ethact; "	\
		"setenv bootfile; setenv dnsip; "			\
		"setenv bootsource legacy; run ser\0"			\
	"restore_env=run standard_env; saveenv; reset\0"		\
	"ser=setenv stdin serial; setenv stdout serial; "		\
		"setenv stderr serial\0"				\
	"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"	\
	"stdin=serial\0"						\
	"stdout=serial\0"						\
	"stderr=serial\0"

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS		{0, 1} /* enable port 1 only */
#define CONFIG_PHY_BASE_ADR		7
#undef CONFIG_RESET_PHY_R
#endif /* CONFIG_CMD_NET */

#ifdef CONFIG_CMD_IDE
#undef CONFIG_IDE_LED
#undef CONFIG_SYS_IDE_MAXBUS
#define CONFIG_SYS_IDE_MAXBUS		1
#undef CONFIG_SYS_IDE_MAXDEVICE
#define CONFIG_SYS_IDE_MAXDEVICE	1
#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_64BIT_LBA
#endif

#endif /* _CONFIG_LSXL_H */
Commit	Line	Data
f214a20e MW	1	/*
	2	* Copyright (c) 2012 Michael Walle
	3	* Michael Walle <michael@walle.cc>
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
f214a20e MW	6	*/
	7
	8	#ifndef _CONFIG_LSXL_H
	9	#define _CONFIG_LSXL_H
	10
45e60c25	11
f214a20e MW	12	/*
	13	* Version number information
	14	*/
	15	#if defined(CONFIG_LSCHLV2)
	16	#define CONFIG_IDENT_STRING " LS-CHLv2"
4ab3fc5e	17	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
f214a20e MW	18	#define CONFIG_MACH_TYPE 3006
	19	#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
	20	#elif defined(CONFIG_LSXHL)
	21	#define CONFIG_IDENT_STRING " LS-XHL"
4ab3fc5e	22	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
f214a20e MW	23	#define CONFIG_MACH_TYPE 2663
	24	/* CONFIG_SYS_TCLK is 200000000 by default */
	25	#else
	26	#error "unknown board"
	27	#endif
	28
	29	/*
	30	* General configuration options
	31	*/
	32	#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
f214a20e MW	33	#define CONFIG_KW88F6281 /* SOC Name */
	34
	35	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	36	#define CONFIG_MISC_INIT_R
	37	#define CONFIG_SHOW_BOOT_PROGRESS
	38
f214a20e	39	#define CONFIG_KIRKWOOD_GPIO
f214a20e MW	40
	41	#define CONFIG_SYS_NO_FLASH
	42	#define CONFIG_SYS_HUSH_PARSER
	43	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	44	#define CONFIG_SYS_CONSOLE_INFO_QUIET
	45
	46	/*
	47	* Enable u-boot API for standalone programs.
	48	*/
	49	#define CONFIG_API
	50
	51	/*
	52	* Commands configuration
	53	*/
4fe49d7b	54	#define CONFIG_CMD_BOOTZ
f214a20e	55	#define CONFIG_CMD_DHCP
f214a20e MW	56	#define CONFIG_CMD_ENV
	57	#define CONFIG_CMD_EXT2
	58	#define CONFIG_CMD_FAT
	59	#define CONFIG_CMD_IDE
	60	#define CONFIG_CMD_PING
	61	#define CONFIG_CMD_PING
	62	#define CONFIG_CMD_SF
	63	#define CONFIG_CMD_SPI
	64	#define CONFIG_CMD_USB
848fe239	65	#define CONFIG_CMD_FS_GENERIC
f214a20e MW	66
	67	#define CONFIG_DOS_PARTITION
	68	#define CONFIG_EFI_PARTITION
	69
	70	/*
	71	* mv-common.h should be defined after CMD configs since it used them
	72	* to enable certain macros
	73	*/
	74	#include "mv-common.h"
	75
4fe49d7b MW	76	/* loading initramfs images without uimage header */
	77	#define CONFIG_SUPPORT_RAW_INITRD
	78
f214a20e	79	/* ST M25P40 */
f214a20e MW	80	#undef CONFIG_ENV_SPI_MAX_HZ
	81	#define CONFIG_ENV_SPI_MAX_HZ 25000000
	82	#undef CONFIG_SF_DEFAULT_SPEED
	83	#define CONFIG_SF_DEFAULT_SPEED 25000000
	84
	85
f214a20e MW	86	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	87
	88	/*
	89	* Environment variables configurations
	90	*/
	91	#ifdef CONFIG_SPI_FLASH
	92	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	93	#define CONFIG_SYS_MAX_FLASH_SECT 8
	94	#define CONFIG_ENV_IS_IN_SPI_FLASH 1
	95	#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */
	96	#else
	97	#define CONFIG_ENV_IS_NOWHERE
	98	#endif
	99
	100	#define CONFIG_ENV_SIZE 0x10000 /* 64k */
	101	#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
	102
	103	/*
	104	* Default environment variables
	105	*/
	106	#define CONFIG_LOADADDR 0x00800000
	107	#define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}"
	108	#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2"
848fe239 MW	109
	110	#if defined(CONFIG_LSXHL)
	111	#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
	112	#elif defined(CONFIG_LSCHLV2)
	113	#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
	114	#else
	115	#error "Unsupported board"
	116	#endif
	117
f214a20e	118	#define CONFIG_EXTRA_ENV_SETTINGS \
848fe239	119	"bootsource=legacy\0" \
f214a20e	120	"hdpart=0:1\0" \
848fe239 MW	121	"kernel_addr=0x00800000\0" \
848fe239 MW	122	"ramdisk_addr=0x01000000\0" \
145df6fe	123	"fdt_addr=0x00ff0000\0" \
848fe239	124	"bootcmd_legacy=ide reset " \
bc2ad9f0 MW	125	"&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
	126	"&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
	127	"&& bootm ${kernel_addr} ${ramdisk_addr}\0" \
4fe49d7b MW	128	"bootcmd_net=bootp ${kernel_addr} vmlinuz " \
	129	"&& tftpboot ${ramdisk_addr} initrd.img " \
	130	"&& setenv ramdisk_len ${filesize} " \
848fe239	131	"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \
4fe49d7b MW	132	"&& bootz ${kernel_addr} " \
4fe49d7b MW	133	"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
f214a20e	134	"bootcmd_hdd=ide reset " \
4fe49d7b MW	135	"&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \
	136	"&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \
	137	"&& setenv ramdisk_len ${filesize} " \
	138	"&& load ide ${hdpart} ${fdt_addr} /dtb " \
	139	"&& bootz ${kernel_addr} " \
	140	"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
f214a20e	141	"bootcmd_usb=usb start " \
4fe49d7b MW	142	"&& load usb 0:1 ${kernel_addr} /vmlinuz " \
	143	"&& load usb 0:1 ${ramdisk_addr} /initrd.img " \
	144	"&& setenv ramdisk_len ${filesize} " \
	145	"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \
	146	"&& bootz ${kernel_addr} " \
	147	"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
f214a20e MW	148	"bootcmd_rescue=run config_nc_dhcp; run nc\0" \
f214a20e MW	149	"eraseenv=sf probe 0 " \
5368c55d MV	150	"&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
5368c55d MV	151	" +" __stringify(CONFIG_ENV_SIZE) "\0" \
f214a20e MW	152	"config_nc_dhcp=setenv autoload_old ${autoload}; " \
	153	"setenv autoload no " \
	154	"&& bootp " \
23c9946a	155	"&& setenv ncip " \
f214a20e MW	156	"&& setenv autoload ${autoload_old}; " \
	157	"setenv autoload_old\0" \
	158	"standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
	159	"setenv ncip; setenv gatewayip; setenv ethact; " \
	160	"setenv bootfile; setenv dnsip; " \
45e60c25	161	"setenv bootsource legacy; run ser\0" \
f214a20e MW	162	"restore_env=run standard_env; saveenv; reset\0" \
	163	"ser=setenv stdin serial; setenv stdout serial; " \
	164	"setenv stderr serial\0" \
	165	"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
	166	"stdin=serial\0" \
	167	"stdout=serial\0" \
	168	"stderr=serial\0"
	169
	170	/*
	171	* Ethernet Driver configuration
	172	*/
	173	#ifdef CONFIG_CMD_NET
	174	#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
	175	#define CONFIG_PHY_BASE_ADR 7
	176	#undef CONFIG_RESET_PHY_R
	177	#endif /* CONFIG_CMD_NET */
	178
	179	#ifdef CONFIG_CMD_IDE
	180	#undef CONFIG_IDE_LED
	181	#undef CONFIG_SYS_IDE_MAXBUS
	182	#define CONFIG_SYS_IDE_MAXBUS 1
	183	#undef CONFIG_SYS_IDE_MAXDEVICE
	184	#define CONFIG_SYS_IDE_MAXDEVICE 1
	185	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
9e5f060e	186	#define CONFIG_SYS_64BIT_LBA
f214a20e MW	187	#endif
	188
	189	#endif /* _CONFIG_LSXL_H */