[people/ms/u-boot.git] / include / configs / lsxl.h

/*
 * Copyright (c) 2012 Michael Walle
 * Michael Walle <michael@walle.cc>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_LSXL_H
#define _CONFIG_LSXL_H

/*
 * Version number information
 */
#if defined(CONFIG_LSCHLV2)
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
#define CONFIG_MACH_TYPE 3006
#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
#elif defined(CONFIG_LSXHL)
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
#define CONFIG_MACH_TYPE 2663
/* CONFIG_SYS_TCLK is 200000000 by default */
#else
#error "unknown board"
#endif

/*
 * General configuration options
 */
#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
#define CONFIG_KW88F6281		/* SOC Name */

#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
#define CONFIG_MISC_INIT_R
#define CONFIG_SHOW_BOOT_PROGRESS

#define CONFIG_KIRKWOOD_GPIO

/*
 * Commands configuration
 */

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* loading initramfs images without uimage header */
#define CONFIG_SUPPORT_RAW_INITRD

/* ST M25P40 */
#undef CONFIG_ENV_SPI_MAX_HZ
#define CONFIG_ENV_SPI_MAX_HZ		25000000
#undef CONFIG_SF_DEFAULT_SPEED
#define CONFIG_SF_DEFAULT_SPEED		25000000

/*
 *  Environment variables configurations
 */
#ifdef CONFIG_SPI_FLASH
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	8
#define CONFIG_ENV_SECT_SIZE		0x10000 /* 64K */
#endif

#define CONFIG_ENV_SIZE			0x10000 /* 64k */
#define CONFIG_ENV_OFFSET		0x70000 /* env starts here */

/*
 * Default environment variables
 */
#define CONFIG_LOADADDR		0x00800000

#if defined(CONFIG_LSXHL)
#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
#elif defined(CONFIG_LSCHLV2)
#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
#else
#error "Unsupported board"
#endif

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"bootsource=legacy\0"						\
	"hdpart=0:1\0"							\
	"kernel_addr=0x00800000\0"					\
	"ramdisk_addr=0x01000000\0"					\
	"fdt_addr=0x00ff0000\0"						\
	"bootcmd_legacy=ide reset "					\
		"&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo "	\
		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
		"&& bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"bootcmd_net=bootp ${kernel_addr} vmlinuz "			\
		"&& tftpboot ${ramdisk_addr} initrd.img "		\
		"&& setenv ramdisk_len ${filesize} "			\
		"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "		\
		"&& bootz ${kernel_addr} "				\
			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
	"bootcmd_hdd=ide reset "					\
		"&& load ide ${hdpart} ${kernel_addr} /vmlinuz "	\
		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "	\
		"&& setenv ramdisk_len ${filesize} "			\
		"&& load ide ${hdpart} ${fdt_addr} /dtb "		\
		"&& bootz ${kernel_addr} "				\
			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
	"bootcmd_usb=usb start "					\
		"&& load usb 0:1 ${kernel_addr} /vmlinuz "		\
		"&& load usb 0:1 ${ramdisk_addr} /initrd.img "		\
		"&& setenv ramdisk_len ${filesize} "			\
		"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "	\
		"&& bootz ${kernel_addr} "				\
			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
	"bootcmd_rescue=run config_nc_dhcp; run nc\0"			\
	"eraseenv=sf probe 0 "						\
		"&& sf erase " __stringify(CONFIG_ENV_OFFSET)		\
			" +" __stringify(CONFIG_ENV_SIZE) "\0"		\
	"config_nc_dhcp=setenv autoload_old ${autoload}; "		\
		"setenv autoload no "					\
		"&& bootp "						\
		"&& setenv ncip "					\
		"&& setenv autoload ${autoload_old}; "			\
		"setenv autoload_old\0"					\
	"standard_env=setenv ipaddr; setenv netmask; setenv serverip; "	\
		"setenv ncip; setenv gatewayip; setenv ethact; "	\
		"setenv bootfile; setenv dnsip; "			\
		"setenv bootsource legacy; run ser\0"			\
	"restore_env=run standard_env; saveenv; reset\0"		\
	"ser=setenv stdin serial; setenv stdout serial; "		\
		"setenv stderr serial\0"				\
	"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"	\
	"stdin=serial\0"						\
	"stdout=serial\0"						\
	"stderr=serial\0"

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS		{0, 1} /* enable port 1 only */
#define CONFIG_PHY_BASE_ADR		7
#undef CONFIG_RESET_PHY_R
#endif /* CONFIG_CMD_NET */

#ifdef CONFIG_IDE
#undef CONFIG_SYS_IDE_MAXBUS
#define CONFIG_SYS_IDE_MAXBUS		1
#undef CONFIG_SYS_IDE_MAXDEVICE
#define CONFIG_SYS_IDE_MAXDEVICE	1
#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_64BIT_LBA
#endif

#endif /* _CONFIG_LSXL_H */
Commit	Line	Data
f214a20e MW	1	/*
	2	* Copyright (c) 2012 Michael Walle
	3	* Michael Walle <michael@walle.cc>
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
f214a20e MW	6	*/
	7
	8	#ifndef _CONFIG_LSXL_H
	9	#define _CONFIG_LSXL_H
	10
	11	/*
	12	* Version number information
	13	*/
	14	#if defined(CONFIG_LSCHLV2)
4ab3fc5e	15	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
f214a20e MW	16	#define CONFIG_MACH_TYPE 3006
	17	#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
	18	#elif defined(CONFIG_LSXHL)
4ab3fc5e	19	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
f214a20e MW	20	#define CONFIG_MACH_TYPE 2663
	21	/* CONFIG_SYS_TCLK is 200000000 by default */
	22	#else
	23	#error "unknown board"
	24	#endif
	25
	26	/*
	27	* General configuration options
	28	*/
	29	#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
f214a20e MW	30	#define CONFIG_KW88F6281 /* SOC Name */
	31
	32	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	33	#define CONFIG_MISC_INIT_R
	34	#define CONFIG_SHOW_BOOT_PROGRESS
	35
f214a20e	36	#define CONFIG_KIRKWOOD_GPIO
f214a20e	37
f214a20e MW	38	/*
	39	* Commands configuration
	40	*/
f214a20e	41
f214a20e MW	42	/*
	43	* mv-common.h should be defined after CMD configs since it used them
	44	* to enable certain macros
	45	*/
	46	#include "mv-common.h"
	47
4fe49d7b MW	48	/* loading initramfs images without uimage header */
	49	#define CONFIG_SUPPORT_RAW_INITRD
	50
f214a20e	51	/* ST M25P40 */
f214a20e MW	52	#undef CONFIG_ENV_SPI_MAX_HZ
	53	#define CONFIG_ENV_SPI_MAX_HZ 25000000
	54	#undef CONFIG_SF_DEFAULT_SPEED
	55	#define CONFIG_SF_DEFAULT_SPEED 25000000
	56
f214a20e MW	57	/*
	58	* Environment variables configurations
	59	*/
	60	#ifdef CONFIG_SPI_FLASH
	61	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	62	#define CONFIG_SYS_MAX_FLASH_SECT 8
f214a20e	63	#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */
f214a20e MW	64	#endif
	65
	66	#define CONFIG_ENV_SIZE 0x10000 /* 64k */
	67	#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
	68
	69	/*
	70	* Default environment variables
	71	*/
	72	#define CONFIG_LOADADDR 0x00800000
848fe239 MW	73
	74	#if defined(CONFIG_LSXHL)
	75	#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
	76	#elif defined(CONFIG_LSCHLV2)
	77	#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
	78	#else
	79	#error "Unsupported board"
	80	#endif
	81
f214a20e	82	#define CONFIG_EXTRA_ENV_SETTINGS \
848fe239	83	"bootsource=legacy\0" \
f214a20e	84	"hdpart=0:1\0" \
848fe239 MW	85	"kernel_addr=0x00800000\0" \
848fe239 MW	86	"ramdisk_addr=0x01000000\0" \
145df6fe	87	"fdt_addr=0x00ff0000\0" \
848fe239	88	"bootcmd_legacy=ide reset " \
bc2ad9f0 MW	89	"&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
	90	"&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
	91	"&& bootm ${kernel_addr} ${ramdisk_addr}\0" \
4fe49d7b MW	92	"bootcmd_net=bootp ${kernel_addr} vmlinuz " \
	93	"&& tftpboot ${ramdisk_addr} initrd.img " \
	94	"&& setenv ramdisk_len ${filesize} " \
848fe239	95	"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \
4fe49d7b MW	96	"&& bootz ${kernel_addr} " \
4fe49d7b MW	97	"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
f214a20e	98	"bootcmd_hdd=ide reset " \
4fe49d7b MW	99	"&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \
	100	"&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \
	101	"&& setenv ramdisk_len ${filesize} " \
	102	"&& load ide ${hdpart} ${fdt_addr} /dtb " \
	103	"&& bootz ${kernel_addr} " \
	104	"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
f214a20e	105	"bootcmd_usb=usb start " \
4fe49d7b MW	106	"&& load usb 0:1 ${kernel_addr} /vmlinuz " \
	107	"&& load usb 0:1 ${ramdisk_addr} /initrd.img " \
	108	"&& setenv ramdisk_len ${filesize} " \
	109	"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \
	110	"&& bootz ${kernel_addr} " \
	111	"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
f214a20e MW	112	"bootcmd_rescue=run config_nc_dhcp; run nc\0" \
f214a20e MW	113	"eraseenv=sf probe 0 " \
5368c55d MV	114	"&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
5368c55d MV	115	" +" __stringify(CONFIG_ENV_SIZE) "\0" \
f214a20e MW	116	"config_nc_dhcp=setenv autoload_old ${autoload}; " \
	117	"setenv autoload no " \
	118	"&& bootp " \
23c9946a	119	"&& setenv ncip " \
f214a20e MW	120	"&& setenv autoload ${autoload_old}; " \
	121	"setenv autoload_old\0" \
	122	"standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
	123	"setenv ncip; setenv gatewayip; setenv ethact; " \
	124	"setenv bootfile; setenv dnsip; " \
45e60c25	125	"setenv bootsource legacy; run ser\0" \
f214a20e MW	126	"restore_env=run standard_env; saveenv; reset\0" \
	127	"ser=setenv stdin serial; setenv stdout serial; " \
	128	"setenv stderr serial\0" \
	129	"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
	130	"stdin=serial\0" \
	131	"stdout=serial\0" \
	132	"stderr=serial\0"
	133
	134	/*
	135	* Ethernet Driver configuration
	136	*/
	137	#ifdef CONFIG_CMD_NET
	138	#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
	139	#define CONFIG_PHY_BASE_ADR 7
	140	#undef CONFIG_RESET_PHY_R
	141	#endif /* CONFIG_CMD_NET */
	142
fc843a02	143	#ifdef CONFIG_IDE
f214a20e MW	144	#undef CONFIG_SYS_IDE_MAXBUS
	145	#define CONFIG_SYS_IDE_MAXBUS 1
	146	#undef CONFIG_SYS_IDE_MAXDEVICE
	147	#define CONFIG_SYS_IDE_MAXDEVICE 1
	148	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
9e5f060e	149	#define CONFIG_SYS_64BIT_LBA
f214a20e MW	150	#endif
	151
	152	#endif /* _CONFIG_LSXL_H */