[people/ms/u-boot.git] / include / configs / m28evk.h

/*
 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
 * on behalf of DENX Software Engineering GmbH
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */
#ifndef __M28EVK_CONFIG_H__
#define __M28EVK_CONFIG_H__

/*
 * SoC configurations
 */
#define	CONFIG_MX28				/* i.MX28 SoC */
#define	CONFIG_MXS_GPIO				/* GPIO control */
#define	CONFIG_SYS_HZ		1000		/* Ticks per second */

/*
 * Define M28EVK machine type by hand until it lands in mach-types
 */
#define	MACH_TYPE_M28EVK	3613

#define	CONFIG_MACH_TYPE	MACH_TYPE_M28EVK

#include <asm/arch/regs-base.h>

#define	CONFIG_SYS_NO_FLASH
#define	CONFIG_BOARD_EARLY_INIT_F
#define	CONFIG_ARCH_MISC_INIT

/*
 * SPL
 */
#define	CONFIG_SPL
#define	CONFIG_SPL_NO_CPU_SUPPORT_CODE
#define	CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mxs"
#define	CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
#define	CONFIG_SPL_LIBCOMMON_SUPPORT
#define	CONFIG_SPL_LIBGENERIC_SUPPORT
#define	CONFIG_SPL_GPIO_SUPPORT

/*
 * U-Boot Commands
 */
#include <config_cmd_default.h>
#define	CONFIG_DISPLAY_CPUINFO
#define	CONFIG_DOS_PARTITION

#define	CONFIG_CMD_CACHE
#define	CONFIG_CMD_DATE
#define	CONFIG_CMD_DHCP
#define	CONFIG_CMD_EEPROM
#define	CONFIG_CMD_EXT2
#define	CONFIG_CMD_FAT
#define	CONFIG_CMD_GPIO
#define	CONFIG_CMD_I2C
#define	CONFIG_CMD_MII
#define	CONFIG_CMD_MMC
#define	CONFIG_CMD_NAND
#define	CONFIG_CMD_NET
#define	CONFIG_CMD_NFS
#define	CONFIG_CMD_PING
#define	CONFIG_CMD_SETEXPR
#define	CONFIG_CMD_SF
#define	CONFIG_CMD_SPI
#define	CONFIG_CMD_USB

/*
 * Memory configurations
 */
#define	CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
#define	PHYS_SDRAM_1			0x40000000	/* Base address */
#define	PHYS_SDRAM_1_SIZE		0x20000000	/* Max 512 MB RAM */
#define	CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
#define	CONFIG_SYS_GBL_DATA_SIZE	128		/* Initial data */
#define	CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
#define	CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
#define	CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
/* Point initial SP in SRAM so SPL can use it too. */

#define CONFIG_SYS_INIT_RAM_ADDR	0x00000000
#define CONFIG_SYS_INIT_RAM_SIZE	(128 * 1024)

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/*
 * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
 * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
 * binary. In case there was more of this mess, 0x100 bytes are skipped.
 */
#define	CONFIG_SYS_TEXT_BASE		0x40000100

/*
 * U-Boot general configurations
 */
#define	CONFIG_SYS_LONGHELP
#define	CONFIG_SYS_PROMPT	"=> "
#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
#define	CONFIG_SYS_PBSIZE	\
	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
						/* Print buffer size */
#define	CONFIG_SYS_MAXARGS	32		/* Max number of command args */
#define	CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
						/* Boot argument buffer size */
#define	CONFIG_VERSION_VARIABLE			/* U-BOOT version */
#define	CONFIG_AUTO_COMPLETE			/* Command auto complete */
#define	CONFIG_CMDLINE_EDITING			/* Command history etc */
#define	CONFIG_SYS_HUSH_PARSER

/*
 * Serial Driver
 */
#define	CONFIG_PL011_SERIAL
#define	CONFIG_PL011_CLOCK		24000000
#define	CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
#define	CONFIG_CONS_INDEX		0
#define	CONFIG_BAUDRATE			115200	/* Default baud rate */

/*
 * MMC Driver
 */
#ifdef	CONFIG_CMD_MMC
#define	CONFIG_MMC
#define	CONFIG_BOUNCE_BUFFER
#define	CONFIG_GENERIC_MMC
#define	CONFIG_MXS_MMC
#endif

/*
 * APBH DMA
 */
#define CONFIG_APBH_DMA

/*
 * NAND
 */
#define	CONFIG_ENV_SIZE			(16 * 1024)
#ifdef	CONFIG_CMD_NAND
#define	CONFIG_NAND_MXS
#define	CONFIG_SYS_MAX_NAND_DEVICE	1
#define	CONFIG_SYS_NAND_BASE		0x60000000
#define	CONFIG_SYS_NAND_5_ADDR_CYCLE

/* Environment is in NAND */
#define	CONFIG_ENV_IS_IN_NAND
#define	CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
#define	CONFIG_ENV_SECT_SIZE		(128 * 1024)
#define	CONFIG_ENV_RANGE		(512 * 1024)
#define	CONFIG_ENV_OFFSET		0x300000
#define	CONFIG_ENV_OFFSET_REDUND	\
		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)

#define	CONFIG_CMD_UBI
#define	CONFIG_CMD_UBIFS
#define	CONFIG_CMD_MTDPARTS
#define	CONFIG_RBTREE
#define	CONFIG_LZO
#define	CONFIG_MTD_DEVICE
#define	CONFIG_MTD_PARTITIONS
#define	MTDIDS_DEFAULT			"nand0=gpmi-nand"
#define	MTDPARTS_DEFAULT			\
	"mtdparts=gpmi-nand:"			\
		"3m(bootloader)ro,"		\
		"512k(environment),"		\
		"512k(redundant-environment),"	\
		"4m(kernel),"			\
		"128k(fdt),"			\
		"8m(ramdisk),"			\
		"-(filesystem)"
#else
#define	CONFIG_ENV_IS_NOWHERE
#endif

/*
 * Ethernet on SOC (FEC)
 */
#ifdef	CONFIG_CMD_NET
#define	CONFIG_ETHPRIME			"FEC0"
#define	CONFIG_FEC_MXC
#define	CONFIG_MII
#define	CONFIG_FEC_XCV_TYPE		RMII
#endif

/*
 * I2C
 */
#ifdef	CONFIG_CMD_I2C
#define	CONFIG_I2C_MXS
#define	CONFIG_HARD_I2C
#define	CONFIG_SYS_I2C_SPEED		400000
#endif

/*
 * EEPROM
 */
#ifdef	CONFIG_CMD_EEPROM
#define	CONFIG_SYS_I2C_MULTI_EEPROMS
#define	CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
#endif

/*
 * RTC
 */
#ifdef	CONFIG_CMD_DATE
/* Use the internal RTC in the MXS chip */
#define	CONFIG_RTC_INTERNAL
#ifdef	CONFIG_RTC_INTERNAL
#define	CONFIG_RTC_MXS
#else
#define	CONFIG_RTC_M41T62
#define	CONFIG_SYS_I2C_RTC_ADDR		0x68
#define	CONFIG_SYS_M41T11_BASE_YEAR	2000
#endif
#endif

/*
 * USB
 */
#ifdef	CONFIG_CMD_USB
#define	CONFIG_USB_EHCI
#define	CONFIG_USB_EHCI_MXS
#define CONFIG_EHCI_MXS_PORT0
#define CONFIG_EHCI_MXS_PORT1
#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
#define	CONFIG_EHCI_IS_TDI
#define	CONFIG_USB_STORAGE
#endif

/*
 * SPI
 */
#ifdef	CONFIG_CMD_SPI
#define	CONFIG_HARD_SPI
#define	CONFIG_MXS_SPI
#define	CONFIG_SPI_HALF_DUPLEX
#define	CONFIG_DEFAULT_SPI_BUS		2
#define	CONFIG_DEFAULT_SPI_CS		0
#define	CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0

/* SPI FLASH */
#ifdef	CONFIG_CMD_SF
#define	CONFIG_SPI_FLASH
#define	CONFIG_SPI_FLASH_STMICRO
#define	CONFIG_SF_DEFAULT_BUS		2
#define	CONFIG_SF_DEFAULT_CS		0
#define	CONFIG_SF_DEFAULT_SPEED		40000000
#define	CONFIG_SF_DEFAULT_MODE		SPI_MODE_0

#define	CONFIG_ENV_SPI_BUS		2
#define	CONFIG_ENV_SPI_CS		0
#define	CONFIG_ENV_SPI_MAX_HZ		40000000
#define	CONFIG_ENV_SPI_MODE		SPI_MODE_0
#endif
#endif

/*
 * Boot Linux
 */
#define	CONFIG_CMDLINE_TAG
#define	CONFIG_SETUP_MEMORY_TAGS
#define	CONFIG_BOOTDELAY	3
#define	CONFIG_BOOTFILE		"uImage"
#define	CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
#define	CONFIG_BOOTCOMMAND	"run bootcmd_net"
#define	CONFIG_LOADADDR		0x42000000
#define	CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
#define	CONFIG_OF_LIBFDT

/*
 * Extra Environments
 */
#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"update_nand_full_filename=u-boot.nand\0"			\
	"update_nand_firmware_filename=u-boot.sb\0"			\
	"update_sd_firmware_filename=u-boot.sd\0"			\
	"update_nand_firmware_maxsz=0x100000\0"				\
	"update_nand_stride=0x40\0"	/* MX28 datasheet ch. 12.12 */	\
	"update_nand_count=0x4\0"	/* MX28 datasheet ch. 12.12 */	\
	"update_nand_get_fcb_size="	/* Get size of FCB blocks */	\
		"nand device 0 ; "					\
		"nand info ; "						\
		"setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
		"setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
	"update_nand_full="		/* Update FCB, DBBT and FW */	\
		"if tftp ${update_nand_full_filename} ; then "		\
		"run update_nand_get_fcb_size ; "			\
		"nand scrub -y 0x0 ${filesize} ; "			\
		"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; "	\
		"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
		"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
		"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
		"fi\0"							\
	"update_nand_firmware="		/* Update only firmware */	\
		"if tftp ${update_nand_firmware_filename} ; then "	\
		"run update_nand_get_fcb_size ; "			\
		"setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
		"setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; "	\
		"setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
		"nand erase ${fcb_sz} ${fw_sz} ; "			\
		"nand write ${loadaddr} ${fcb_sz} ${filesize} ; "	\
		"nand write ${loadaddr} ${fw_off} ${filesize} ; "	\
		"fi\0"							\
	"update_sd_firmware="		/* Update the SD firmware partition */ \
		"if mmc rescan ; then "					\
		"if tftp ${update_sd_firmware_filename} ; then "	\
		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
		"setexpr fw_sz ${fw_sz} + 1 ; "				\
		"mmc write ${loadaddr} 0x800 ${fw_sz} ; "		\
		"fi ; "							\
		"fi\0"

#endif /* __M28EVK_CONFIG_H__ */
Commit	Line	Data
fc102728 MV	1	/*
	2	* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
	3	* on behalf of DENX Software Engineering GmbH
	4	*
	5	* This program is free software; you can redistribute it and/or
	6	* modify it under the terms of the GNU General Public License as
	7	* published by the Free Software Foundation; either version 2 of
	8	* the License, or (at your option) any later version.
	9	*
	10	* This program is distributed in the hope that it will be useful,
	11	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	12	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	13	* GNU General Public License for more details.
	14	*
	15	* You should have received a copy of the GNU General Public License
	16	* along with this program; if not, write to the Free Software
	17	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	18	* MA 02111-1307 USA
	19	*/
212033fc OS	20	#ifndef __M28EVK_CONFIG_H__
212033fc OS	21	#define __M28EVK_CONFIG_H__
fc102728	22
fc102728 MV	23	/*
	24	* SoC configurations
	25	*/
	26	#define CONFIG_MX28 /* i.MX28 SoC */
	27	#define CONFIG_MXS_GPIO /* GPIO control */
	28	#define CONFIG_SYS_HZ 1000 /* Ticks per second */
	29
	30	/*
	31	* Define M28EVK machine type by hand until it lands in mach-types
	32	*/
	33	#define MACH_TYPE_M28EVK 3613
	34
	35	#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
	36
e229d445 OS	37	#include <asm/arch/regs-base.h>
e229d445 OS	38
fc102728	39	#define CONFIG_SYS_NO_FLASH
fc102728	40	#define CONFIG_BOARD_EARLY_INIT_F
22fe68fb	41	#define CONFIG_ARCH_MISC_INIT
fc102728	42
04fe4273 MV	43	/*
	44	* SPL
	45	*/
	46	#define CONFIG_SPL
	47	#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
3a0398d7 OS	48	#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"
3a0398d7 OS	49	#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
8ba1604d MV	50	#define CONFIG_SPL_LIBCOMMON_SUPPORT
8ba1604d MV	51	#define CONFIG_SPL_LIBGENERIC_SUPPORT
f8c4a86b	52	#define CONFIG_SPL_GPIO_SUPPORT
04fe4273	53
fc102728 MV	54	/*
	55	* U-Boot Commands
	56	*/
	57	#include <config_cmd_default.h>
	58	#define CONFIG_DISPLAY_CPUINFO
	59	#define CONFIG_DOS_PARTITION
	60
	61	#define CONFIG_CMD_CACHE
	62	#define CONFIG_CMD_DATE
	63	#define CONFIG_CMD_DHCP
	64	#define CONFIG_CMD_EEPROM
	65	#define CONFIG_CMD_EXT2
	66	#define CONFIG_CMD_FAT
	67	#define CONFIG_CMD_GPIO
	68	#define CONFIG_CMD_I2C
	69	#define CONFIG_CMD_MII
	70	#define CONFIG_CMD_MMC
	71	#define CONFIG_CMD_NAND
	72	#define CONFIG_CMD_NET
	73	#define CONFIG_CMD_NFS
	74	#define CONFIG_CMD_PING
	75	#define CONFIG_CMD_SETEXPR
	76	#define CONFIG_CMD_SF
	77	#define CONFIG_CMD_SPI
8f59bc1f	78	#define CONFIG_CMD_USB
fc102728 MV	79
	80	/*
	81	* Memory configurations
	82	*/
0249e4b7	83	#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
fc102728	84	#define PHYS_SDRAM_1 0x40000000 /* Base address */
feef24ee	85	#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
fc102728 MV	86	#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
	87	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */
	88	#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
	89	#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
	90	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	91	/* Point initial SP in SRAM so SPL can use it too. */
1084606c	92
9ed5dfa8	93	#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000
1084606c FE	94	#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024)
	95
	96	#define CONFIG_SYS_INIT_SP_OFFSET \
	97	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	98	#define CONFIG_SYS_INIT_SP_ADDR \
	99	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
fc102728 MV	100	/*
	101	* We need to sacrifice first 4 bytes of RAM here to avoid triggering some
	102	* strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
	103	* binary. In case there was more of this mess, 0x100 bytes are skipped.
	104	*/
	105	#define CONFIG_SYS_TEXT_BASE 0x40000100
	106
	107	/*
	108	* U-Boot general configurations
	109	*/
	110	#define CONFIG_SYS_LONGHELP
	111	#define CONFIG_SYS_PROMPT "=> "
	112	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
	113	#define CONFIG_SYS_PBSIZE \
	114	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	115	/* Print buffer size */
	116	#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
	117	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	118	/* Boot argument buffer size */
	119	#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
	120	#define CONFIG_AUTO_COMPLETE /* Command auto complete */
	121	#define CONFIG_CMDLINE_EDITING /* Command history etc */
	122	#define CONFIG_SYS_HUSH_PARSER
fc102728 MV	123
	124	/*
	125	* Serial Driver
	126	*/
	127	#define CONFIG_PL011_SERIAL
	128	#define CONFIG_PL011_CLOCK 24000000
	129	#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
	130	#define CONFIG_CONS_INDEX 0
	131	#define CONFIG_BAUDRATE 115200 /* Default baud rate */
fc102728 MV	132
	133	/*
	134	* MMC Driver
	135	*/
	136	#ifdef CONFIG_CMD_MMC
	137	#define CONFIG_MMC
6dc71c8d	138	#define CONFIG_BOUNCE_BUFFER
fc102728 MV	139	#define CONFIG_GENERIC_MMC
	140	#define CONFIG_MXS_MMC
	141	#endif
	142
e87ca8c0 MV	143	/*
	144	* APBH DMA
	145	*/
	146	#define CONFIG_APBH_DMA
	147
fc102728 MV	148	/*
	149	* NAND
	150	*/
c660a541	151	#define CONFIG_ENV_SIZE (16 * 1024)
fc102728 MV	152	#ifdef CONFIG_CMD_NAND
fc102728 MV	153	#define CONFIG_NAND_MXS
fc102728 MV	154	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	155	#define CONFIG_SYS_NAND_BASE 0x60000000
	156	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
fc102728 MV	157
	158	/* Environment is in NAND */
	159	#define CONFIG_ENV_IS_IN_NAND
fc102728 MV	160	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	161	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
	162	#define CONFIG_ENV_RANGE (512 * 1024)
	163	#define CONFIG_ENV_OFFSET 0x300000
	164	#define CONFIG_ENV_OFFSET_REDUND \
	165	(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
	166
	167	#define CONFIG_CMD_UBI
	168	#define CONFIG_CMD_UBIFS
	169	#define CONFIG_CMD_MTDPARTS
	170	#define CONFIG_RBTREE
	171	#define CONFIG_LZO
	172	#define CONFIG_MTD_DEVICE
	173	#define CONFIG_MTD_PARTITIONS
c16ecb09	174	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
fc102728	175	#define MTDPARTS_DEFAULT \
c16ecb09	176	"mtdparts=gpmi-nand:" \
fc102728 MV	177	"3m(bootloader)ro," \
	178	"512k(environment)," \
	179	"512k(redundant-environment)," \
	180	"4m(kernel)," \
1f75b541 MV	181	"128k(fdt)," \
1f75b541 MV	182	"8m(ramdisk)," \
fc102728	183	"-(filesystem)"
c660a541 MV	184	#else
c660a541 MV	185	#define CONFIG_ENV_IS_NOWHERE
fc102728 MV	186	#endif
	187
	188	/*
	189	* Ethernet on SOC (FEC)
	190	*/
	191	#ifdef CONFIG_CMD_NET
fc102728 MV	192	#define CONFIG_ETHPRIME "FEC0"
fc102728 MV	193	#define CONFIG_FEC_MXC
fc102728	194	#define CONFIG_MII
fc102728 MV	195	#define CONFIG_FEC_XCV_TYPE RMII
	196	#endif
	197
	198	/*
	199	* I2C
	200	*/
	201	#ifdef CONFIG_CMD_I2C
	202	#define CONFIG_I2C_MXS
	203	#define CONFIG_HARD_I2C
	204	#define CONFIG_SYS_I2C_SPEED 400000
	205	#endif
	206
	207	/*
	208	* EEPROM
	209	*/
	210	#ifdef CONFIG_CMD_EEPROM
	211	#define CONFIG_SYS_I2C_MULTI_EEPROMS
	212	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	213	#endif
	214
	215	/*
	216	* RTC
	217	*/
	218	#ifdef CONFIG_CMD_DATE
	219	/* Use the internal RTC in the MXS chip */
	220	#define CONFIG_RTC_INTERNAL
	221	#ifdef CONFIG_RTC_INTERNAL
	222	#define CONFIG_RTC_MXS
	223	#else
	224	#define CONFIG_RTC_M41T62
	225	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	226	#define CONFIG_SYS_M41T11_BASE_YEAR 2000
	227	#endif
	228	#endif
	229
8f59bc1f MV	230	/*
	231	* USB
	232	*/
	233	#ifdef CONFIG_CMD_USB
	234	#define CONFIG_USB_EHCI
	235	#define CONFIG_USB_EHCI_MXS
afa87210 MV	236	#define CONFIG_EHCI_MXS_PORT0
	237	#define CONFIG_EHCI_MXS_PORT1
	238	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
8f59bc1f MV	239	#define CONFIG_EHCI_IS_TDI
	240	#define CONFIG_USB_STORAGE
	241	#endif
	242
fc102728 MV	243	/*
	244	* SPI
	245	*/
	246	#ifdef CONFIG_CMD_SPI
	247	#define CONFIG_HARD_SPI
	248	#define CONFIG_MXS_SPI
	249	#define CONFIG_SPI_HALF_DUPLEX
	250	#define CONFIG_DEFAULT_SPI_BUS 2
2a090cea	251	#define CONFIG_DEFAULT_SPI_CS 0
fc102728 MV	252	#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
	253
	254	/* SPI FLASH */
	255	#ifdef CONFIG_CMD_SF
	256	#define CONFIG_SPI_FLASH
	257	#define CONFIG_SPI_FLASH_STMICRO
2a090cea MV	258	#define CONFIG_SF_DEFAULT_BUS 2
2a090cea MV	259	#define CONFIG_SF_DEFAULT_CS 0
1d6d5f96	260	#define CONFIG_SF_DEFAULT_SPEED 40000000
2a090cea	261	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
fc102728	262
fc102728	263	#define CONFIG_ENV_SPI_BUS 2
2a090cea	264	#define CONFIG_ENV_SPI_CS 0
1d6d5f96	265	#define CONFIG_ENV_SPI_MAX_HZ 40000000
fc102728 MV	266	#define CONFIG_ENV_SPI_MODE SPI_MODE_0
	267	#endif
	268	#endif
	269
	270	/*
	271	* Boot Linux
	272	*/
	273	#define CONFIG_CMDLINE_TAG
	274	#define CONFIG_SETUP_MEMORY_TAGS
	275	#define CONFIG_BOOTDELAY 3
	276	#define CONFIG_BOOTFILE "uImage"
9fb6aa9a	277	#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 "
fc102728 MV	278	#define CONFIG_BOOTCOMMAND "run bootcmd_net"
	279	#define CONFIG_LOADADDR 0x42000000
	280	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
b91ce018	281	#define CONFIG_OF_LIBFDT
fc102728 MV	282
	283	/*
	284	* Extra Environments
	285	*/
	286	#define CONFIG_EXTRA_ENV_SETTINGS \
	287	"update_nand_full_filename=u-boot.nand\0" \
	288	"update_nand_firmware_filename=u-boot.sb\0" \
9a0f98d3	289	"update_sd_firmware_filename=u-boot.sd\0" \
fc102728 MV	290	"update_nand_firmware_maxsz=0x100000\0" \
	291	"update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
	292	"update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
	293	"update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
	294	"nand device 0 ; " \
	295	"nand info ; " \
	296	"setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
	297	"setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
	298	"update_nand_full=" /* Update FCB, DBBT and FW */ \
	299	"if tftp ${update_nand_full_filename} ; then " \
	300	"run update_nand_get_fcb_size ; " \
	301	"nand scrub -y 0x0 ${filesize} ; " \
71779d5b	302	"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \
fc102728 MV	303	"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
	304	"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
	305	"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
	306	"fi\0" \
	307	"update_nand_firmware=" /* Update only firmware */ \
	308	"if tftp ${update_nand_firmware_filename} ; then " \
	309	"run update_nand_get_fcb_size ; " \
	310	"setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
	311	"setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
	312	"setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
	313	"nand erase ${fcb_sz} ${fw_sz} ; " \
	314	"nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
	315	"nand write ${loadaddr} ${fw_off} ${filesize} ; " \
9a0f98d3 MV	316	"fi\0" \
	317	"update_sd_firmware=" /* Update the SD firmware partition */ \
	318	"if mmc rescan ; then " \
	319	"if tftp ${update_sd_firmware_filename} ; then " \
	320	"setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
	321	"setexpr fw_sz ${fw_sz} + 1 ; " \
	322	"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
	323	"fi ; " \
fc102728 MV	324	"fi\0"
fc102728 MV	325
212033fc	326	#endif /* __M28EVK_CONFIG_H__ */