[people/ms/u-boot.git] / include / configs / m501sk.h

/*
 * Based on Modifications by Alan Lu / Artila and
 * Rick Bronson <rick@efn.org>
 *
 * Configuration settings for the Artila M-501 starter kit,
 * with V02 processor card.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* ARM asynchronous clock */
/* from 18.432 MHz crystal (18432000 / 4 * 39) */
#define AT91C_MAIN_CLOCK	179712000
/* Perip clock (AT91C_MASTER_CLOCK / 3) */
#define AT91C_MASTER_CLOCK	59904000
#define AT91_SLOW_CLOCK	32768 /* slow clock */

#define CONFIG_AT91RM9200DK	1 /* on an AT91RM9200DK Board    */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CONFIG_CMDLINE_TAG	1 /* enable passing of ATAGs    */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_INITRD_TAG		1

#define CONFIG_MENUPROMPT		"."

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_SYS_GBL_DATA_SIZE	128	/* Bytes reserved for initial data */

#define CONFIG_BAUDRATE			115200

/* Hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */
#define CONFIG_SYS_AT91C_BRGR_DIVISOR	33

/*
 * Hardware drivers
 */
#define CONFIG_SYS_FLASH_CFI		1
#define CONFIG_FLASH_CFI_DRIVER	1
#define CONFIG_ENV_SECT_SIZE	0x20000
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_PROTECTION	/*for Intel P30 Flash*/
#define CONFIG_HARD_I2C
#define CONFIG_SYS_I2C_SPEED		100
#define CONFIG_SYS_I2C_SLAVE		0
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#undef CONFIG_ENV_IS_IN_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
#define CONFIG_SYS_EEPROM_AT24C16
#define CONFIG_SYS_I2C_RTC_ADDR		0x32
#undef CONFIG_RTC_DS1338
#define CONFIG_RTC_RS5C372A
#undef CONFIG_POST
#define CONFIG_M501SK
#define CONFIG_CMC_PU2

/* define one of these to choose the DBGU, USART0  or USART1 as console */
#define CONFIG_DBGU
#undef CONFIG_USART0
#undef CONFIG_USART1

#undef CONFIG_HWFLOW		/* don't include RTS/CTS flow control support */
#undef CONFIG_MODEM_SUPPORT	/* disable modem initialization stuff */

#define CONFIG_BOOTARGS	"mem=32M console=ttyS0,115200 "	\
			"initrd=0x20800000,8192000 ramdisk_size=15360 "	\
			"root=/dev/ram0 rw mtdparts=phys_mapped_flash:"	\
			"128k(loader)ro,128k(reserved)ro,1408k(linux)"	\
			"ro,2560k(ramdisk)ro,-(userdisk)"
#define CONFIG_BOOTCOMMAND	"bootm 10040000 101a0000"
#define CONFIG_BOOTDELAY	1
#define CONFIG_BAUDRATE	115200
#define CONFIG_IPADDR		192.168.1.100
#define CONFIG_SERVERIP	192.168.1.1
#define CONFIG_GATEWAYIP	192.168.1.254
#define CONFIG_NETMASK		255.255.255.0
#define CONFIG_BOOTFILE	uImage
#define CONFIG_ETHADDR		00:13:48:aa:bb:cc
#define CONFIG_ENV_OVERWRITE	1
#define BOARD_LATE_INIT

#define	CONFIG_EXTRA_ENV_SETTINGS \
		"unlock=yes\0"

#define CONFIG_CMD_JFFS2
#undef CONFIG_CMD_EEPROM
#define CONFIG_CMD_NET
#define CONFIG_CMD_RUN
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_PING
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_I2C
#define CONFIG_CMD_DATE
#define CONFIG_CMD_POST
#define CONFIG_CMD_MISC
#define CONFIG_CMD_LOADS
#define CONFIG_CMD_IMI
#define CONFIG_CMD_NFS
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_ENV

#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_PROMPT_HUSH_PS2	    ">>"

#define CONFIG_SYS_MAX_NAND_DEVICE	0 /* Max number of NAND devices */
#define SECTORSIZE			     512

#define ADDR_COLUMN		1
#define ADDR_PAGE		2
#define ADDR_COLUMN_PAGE	3

#define CONFIG_NR_DRAM_BANKS	1
#define PHYS_SDRAM		0x20000000
#define PHYS_SDRAM_SIZE	0x2000000 /* 32 megs */

#define CONFIG_SYS_MEMTEST_START	0x21000000 /* PHYS_SDRAM */
/* CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */
#define CONFIG_SYS_MEMTEST_END	0x00100000

#define CONFIG_DRIVER_ETHER
#define CONFIG_NET_RETRY_COUNT	20
#define CONFIG_AT91C_USE_RMII

#define PHYS_FLASH_1		0x10000000
#define PHYS_FLASH_SIZE	0x800000 /* 8 megs main flash */
#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	256
#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */

#ifdef CONFIG_ENV_IS_IN_DATAFLASH
#define CONFIG_ENV_OFFSET		0x20000
#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE		0x2000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + 0x00020000)
#define CONFIG_ENV_SIZE		2048
#endif

#ifdef CONFIG_ENV_IS_IN_EEPROM
#define CONFIG_ENV_OFFSET		1024
#define CONFIG_ENV_SIZE		1024
#endif

#define CONFIG_SYS_LOAD_ADDR		0x21000000 /* default load address */

/* use for protect flash sectors */
#define CONFIG_SYS_BOOT_SIZE		0x6000 /* 24 KBytes */
#define CONFIG_SYS_U_BOOT_BASE	(PHYS_FLASH_1 + 0x10000)
#define CONFIG_SYS_U_BOOT_SIZE	0x10000 /* 64 KBytes */

#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 , 19200, 38400, 57600, 9600 }

#define CONFIG_SYS_PROMPT		"U-Boot> " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE		512 /* Console I/O Buffer Size */
#define CONFIG_SYS_MAXARGS		16 /* max number of command args */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)

#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_HZ_CLOCK		AT91C_MASTER_CLOCK/2

#define CONFIG_STACKSIZE	(32*1024) /* regular stack */

#ifdef CONFIG_USE_IRQ
#error CONFIG_USE_IRQ not supported
#endif

#endif
Commit	Line	Data
ea8d989f TT	1	/*
	2	* Based on Modifications by Alan Lu / Artila and
	3	* Rick Bronson <rick@efn.org>
	4	*
	5	* Configuration settings for the Artila M-501 starter kit,
	6	* with V02 processor card.
	7	*
	8	* See file CREDITS for list of people who contributed to this
	9	* project.
	10	*
	11	* This program is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License as
	13	* published by the Free Software Foundation; either version 2 of
	14	* the License, or (at your option) any later version.
	15	*
	16	* This program is distributed in the hope that it will be useful,
	17	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	18	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	19	* GNU General Public License for more details.
	20	*
	21	* You should have received a copy of the GNU General Public License
	22	* along with this program; if not, write to the Free Software
	23	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	24	* MA 02111-1307 USA
	25	*/
	26
	27	#ifndef __CONFIG_H
	28	#define __CONFIG_H
	29
	30	/* ARM asynchronous clock */
	31	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
	32	#define AT91C_MAIN_CLOCK 179712000
	33	/* Perip clock (AT91C_MASTER_CLOCK / 3) */
	34	#define AT91C_MASTER_CLOCK 59904000
	35	#define AT91_SLOW_CLOCK 32768 /* slow clock */
	36
	37	#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
	38	#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
	39	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	40	#define CONFIG_SETUP_MEMORY_TAGS 1
	41	#define CONFIG_INITRD_TAG 1
	42
ea8d989f TT	43	#define CONFIG_MENUPROMPT "."
	44
	45	/*
	46	* Size of malloc() pool
	47	*/
6d0f6bcf JCPV	48	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
6d0f6bcf JCPV	49	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Bytes reserved for initial data */
ea8d989f TT	50
	51	#define CONFIG_BAUDRATE 115200
	52
	53	/* Hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */
6d0f6bcf	54	#define CONFIG_SYS_AT91C_BRGR_DIVISOR 33
ea8d989f TT	55
	56	/*
	57	* Hardware drivers
	58	*/
6d0f6bcf	59	#define CONFIG_SYS_FLASH_CFI 1
00b1883a	60	#define CONFIG_FLASH_CFI_DRIVER 1
0e8d1586	61	#define CONFIG_ENV_SECT_SIZE 0x20000
6d0f6bcf JCPV	62	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
6d0f6bcf JCPV	63	#define CONFIG_SYS_FLASH_PROTECTION /for Intel P30 Flash/
ea8d989f	64	#define CONFIG_HARD_I2C
6d0f6bcf JCPV	65	#define CONFIG_SYS_I2C_SPEED 100
	66	#define CONFIG_SYS_I2C_SLAVE 0
	67	#define CONFIG_SYS_CONSOLE_INFO_QUIET
bb1f8b4f	68	#undef CONFIG_ENV_IS_IN_EEPROM
6d0f6bcf JCPV	69	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	70	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	71	#define CONFIG_SYS_EEPROM_AT24C16
	72	#define CONFIG_SYS_I2C_RTC_ADDR 0x32
ea8d989f TT	73	#undef CONFIG_RTC_DS1338
	74	#define CONFIG_RTC_RS5C372A
	75	#undef CONFIG_POST
	76	#define CONFIG_M501SK
	77	#define CONFIG_CMC_PU2
	78
	79	/* define one of these to choose the DBGU, USART0 or USART1 as console */
	80	#define CONFIG_DBGU
	81	#undef CONFIG_USART0
	82	#undef CONFIG_USART1
	83
	84	#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
	85	#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
	86
	87	#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200 " \
	88	"initrd=0x20800000,8192000 ramdisk_size=15360 " \
	89	"root=/dev/ram0 rw mtdparts=phys_mapped_flash:" \
	90	"128k(loader)ro,128k(reserved)ro,1408k(linux)" \
	91	"ro,2560k(ramdisk)ro,-(userdisk)"
	92	#define CONFIG_BOOTCOMMAND "bootm 10040000 101a0000"
	93	#define CONFIG_BOOTDELAY 1
	94	#define CONFIG_BAUDRATE 115200
	95	#define CONFIG_IPADDR 192.168.1.100
	96	#define CONFIG_SERVERIP 192.168.1.1
	97	#define CONFIG_GATEWAYIP 192.168.1.254
	98	#define CONFIG_NETMASK 255.255.255.0
	99	#define CONFIG_BOOTFILE uImage
	100	#define CONFIG_ETHADDR 00:13:48:aa:bb:cc
	101	#define CONFIG_ENV_OVERWRITE 1
	102	#define BOARD_LATE_INIT
	103
	104	#define CONFIG_EXTRA_ENV_SETTINGS \
	105	"unlock=yes\0"
	106
936897d4	107	#define CONFIG_CMD_JFFS2
ea8d989f TT	108	#undef CONFIG_CMD_EEPROM
	109	#define CONFIG_CMD_NET
	110	#define CONFIG_CMD_RUN
	111	#define CONFIG_CMD_DHCP
	112	#define CONFIG_CMD_MEMORY
	113	#define CONFIG_CMD_PING
	114	#define CONFIG_CMD_SDRAM
	115	#define CONFIG_CMD_DIAG
	116	#define CONFIG_CMD_I2C
	117	#define CONFIG_CMD_DATE
	118	#define CONFIG_CMD_POST
	119	#define CONFIG_CMD_MISC
	120	#define CONFIG_CMD_LOADS
	121	#define CONFIG_CMD_IMI
	122	#define CONFIG_CMD_NFS
	123	#define CONFIG_CMD_FLASH
	124	#define CONFIG_CMD_ENV
	125
6d0f6bcf	126	#define CONFIG_SYS_HUSH_PARSER
ea8d989f	127	#define CONFIG_AUTO_COMPLETE
6d0f6bcf	128	#define CONFIG_SYS_PROMPT_HUSH_PS2 ">>"
ea8d989f	129
6d0f6bcf	130	#define CONFIG_SYS_MAX_NAND_DEVICE 0 /* Max number of NAND devices */
ea8d989f TT	131	#define SECTORSIZE 512
	132
	133	#define ADDR_COLUMN 1
	134	#define ADDR_PAGE 2
	135	#define ADDR_COLUMN_PAGE 3
	136
	137	#define CONFIG_NR_DRAM_BANKS 1
	138	#define PHYS_SDRAM 0x20000000
	139	#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
	140
6d0f6bcf JCPV	141	#define CONFIG_SYS_MEMTEST_START 0x21000000 /* PHYS_SDRAM */
	142	/* CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */
	143	#define CONFIG_SYS_MEMTEST_END 0x00100000
ea8d989f TT	144
	145	#define CONFIG_DRIVER_ETHER
	146	#define CONFIG_NET_RETRY_COUNT 20
	147	#define CONFIG_AT91C_USE_RMII
	148
	149	#define PHYS_FLASH_1 0x10000000
	150	#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
6d0f6bcf JCPV	151	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	152	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	153	#define CONFIG_SYS_MAX_FLASH_SECT 256
	154	#define CONFIG_SYS_FLASH_ERASE_TOUT (2CONFIG_SYS_HZ) / Timeout for Flash Erase */
	155	#define CONFIG_SYS_FLASH_WRITE_TOUT (2CONFIG_SYS_HZ) / Timeout for Flash Write */
ea8d989f	156
057c849c	157	#ifdef CONFIG_ENV_IS_IN_DATAFLASH
0e8d1586	158	#define CONFIG_ENV_OFFSET 0x20000
6d0f6bcf	159	#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
0e8d1586	160	#define CONFIG_ENV_SIZE 0x2000
ea8d989f	161	#else
5a1aceb0	162	#define CONFIG_ENV_IS_IN_FLASH
0e8d1586 JCPV	163	#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x00020000)
0e8d1586 JCPV	164	#define CONFIG_ENV_SIZE 2048
ea8d989f TT	165	#endif
ea8d989f TT	166
bb1f8b4f	167	#ifdef CONFIG_ENV_IS_IN_EEPROM
0e8d1586 JCPV	168	#define CONFIG_ENV_OFFSET 1024
0e8d1586 JCPV	169	#define CONFIG_ENV_SIZE 1024
ea8d989f TT	170	#endif
ea8d989f TT	171
6d0f6bcf	172	#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
ea8d989f TT	173
ea8d989f TT	174	/* use for protect flash sectors */
6d0f6bcf JCPV	175	#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */
	176	#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
	177	#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */
ea8d989f	178
6d0f6bcf	179	#define CONFIG_SYS_BAUDRATE_TABLE { 115200 , 19200, 38400, 57600, 9600 }
ea8d989f	180
6d0f6bcf JCPV	181	#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
	182	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	183	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
ea8d989f	184	/* Print Buffer Size */
6d0f6bcf	185	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
ea8d989f	186
6d0f6bcf JCPV	187	#define CONFIG_SYS_HZ 1000
6d0f6bcf JCPV	188	#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2
ea8d989f TT	189
	190	#define CONFIG_STACKSIZE (321024) / regular stack */
	191
	192	#ifdef CONFIG_USE_IRQ
	193	#error CONFIG_USE_IRQ not supported
	194	#endif
	195
	196	#endif