[people/ms/u-boot.git] / include / configs / ma5d4evk.h

/*
 * DENX MA5D4 configuration
 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __MA5D4EVK_CONFIG_H__
#define __MA5D4EVK_CONFIG_H__

#define CONFIG_SYS_NO_FLASH

#define CONFIG_TIMESTAMP		/* Print image info with timestamp */

#include "at91-sama5_common.h"
#undef CONFIG_BOOTARGS
#define CONFIG_SYS_USE_SERIALFLASH	1

/*
 * U-Boot Commands
 */
#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
/*#define CONFIG_LCD*/

/*
 * Memory configurations
 */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
#define CONFIG_SYS_SDRAM_SIZE		0x10000000

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_INIT_SP_ADDR		0x210000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif

/*
 * Environment
 */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_OFFSET		0x8000
#define CONFIG_ENV_SIZE			0x4000
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
#define CONFIG_ENV_SECT_SIZE		0x1000

/*
 * U-Boot general configurations
 */
#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */

/*
 * Serial Driver
 */
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE		ATMEL_BASE_USART0
#define CONFIG_USART_ID			ATMEL_ID_USART0

/*
 * Ethernet
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_MACB_SEARCH_PHY
#define CONFIG_ARP_TIMEOUT		200UL
#define CONFIG_IP_DEFRAG
#endif

/*
 * LCD
 */
#ifdef CONFIG_LCD
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
#define CONFIG_BMP_24BPP
#define CONFIG_BMP_32BPP
#define LCD_BPP				LCD_COLOR16
#define LCD_OUTPUT_BPP                  24
#define CONFIG_ATMEL_HLCD
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#endif

/*
 * SD/MMC
 */
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif

/*
 * SPI NOR (boot memory)
 */
#ifdef CONFIG_CMD_SF
#define CONFIG_ATMEL_SPI
#define CONFIG_ATMEL_SPI0
#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		30000000
#endif

/*
 * USB
 */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_ATMEL
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
#define CONFIG_USB_STORAGE

/* USB device */
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_MANUFACTURER      "DENX"
#endif

/*
 * Boot Linux
 */
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTFILE		"fitImage"
#define CONFIG_BOOTARGS		"console=ttyS3,115200"
#define CONFIG_LOADADDR		0x20800000
#define CONFIG_BOOTCOMMAND	"run mmc_mmc"
#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR

/*
 * Extra Environments
 */
#define CONFIG_PREBOOT		"run try_bootscript"
#define CONFIG_HOSTNAME		ma5d4evk

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"consdev=ttyS3\0"						\
	"baudrate=115200\0"						\
	"bootscript=boot.scr\0"						\
	"bootdev=/dev/mmcblk1p1\0"					\
	"bootpart=1:1\0"						\
	"rootdev=/dev/mmcblk1p2\0"					\
	"netdev=eth0\0"							\
	"kernel_addr_r=0x22000000\0"					\
	"update_spi_firmware_spl_addr=0x21000000\0"			\
	"update_spi_firmware_spl_filename=boot.bin\0"			\
	"update_spi_firmware_addr=0x22000000\0"				\
	"update_spi_firmware_filename=u-boot.img\0"			\
	"update_spi_firmware="	/* Update the SPI flash firmware */	\
		"if sf probe ; then "					\
		"if tftp ${update_spi_firmware_spl_addr} "		\
			"${update_spi_firmware_spl_filename} ; then "	\
		"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
		"if tftp ${update_spi_firmware_addr} "			\
			"${update_spi_firmware_filename} ; then "	\
		"setenv update_spi_firmware_filesize ${filesize} ; "	\
		"sf update ${update_spi_firmware_spl_addr} 0x0 "	\
			"${update_spi_firmware_spl_filesize} ; "	\
		"sf update ${update_spi_firmware_addr} 0x10000 "	\
			"${update_spi_firmware_filesize} ; "		\
		"fi ; "							\
		"fi ; "							\
		"fi\0"							\
	"addcons="							\
		"setenv bootargs ${bootargs} "				\
		"console=${consdev},${baudrate}\0"			\
	"addip="							\
		"setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
			"${netmask}:${hostname}:${netdev}:off\0"	\
	"addmisc="							\
		"setenv bootargs ${bootargs} ${miscargs}\0"		\
	"addargs=run addcons addmisc\0"					\
	"mmcload="							\
		"mmc rescan ; "						\
		"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"	\
	"netload="							\
		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
	"miscargs=nohlt panic=1\0"					\
	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
	"nfsargs="							\
		"setenv bootargs root=/dev/nfs rw "			\
			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
	"mmc_mmc="							\
		"run mmcload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"mmc_nfs="							\
		"run mmcload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_mmc="							\
		"run netload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_nfs="							\
		"run netload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"try_bootscript="						\
		"mmc rescan;"						\
		"if test -e mmc ${bootpart} ${bootscript} ; then "	\
		"if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
		"then ; "						\
			"echo Running bootscript... ; "			\
			"source ${kernel_addr_r} ; "			\
		"fi ; "							\
		"fi\0"
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE		0x200000
#define CONFIG_SPL_MAX_SIZE		0x10000
#define CONFIG_SPL_BSS_START_ADDR	0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000

#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT

#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN		(512 << 10)

#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000

#endif	/* __MA5D4EVK_CONFIG_H__ */
Commit	Line	Data
c21c28b6 MV	1	/*
	2	* DENX MA5D4 configuration
	3	* Copyright (C) 2015 Marek Vasut <marex@denx.de>
	4	*
	5	* SPDX-License-Identifier: GPL-2.0+
	6	*/
	7
	8	#ifndef __MA5D4EVK_CONFIG_H__
	9	#define __MA5D4EVK_CONFIG_H__
	10
	11	#define CONFIG_SYS_NO_FLASH
	12
c21c28b6 MV	13	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	14
	15	#include "at91-sama5_common.h"
	16	#undef CONFIG_BOOTARGS
	17	#define CONFIG_SYS_USE_SERIALFLASH 1
	18
	19	/*
	20	* U-Boot Commands
	21	*/
	22	#define CONFIG_DOS_PARTITION
	23	#define CONFIG_FAT_WRITE
	24	/#define CONFIG_LCD/
	25
c21c28b6 MV	26	/*
	27	* Memory configurations
	28	*/
	29	#define CONFIG_NR_DRAM_BANKS 1
	30	#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
	31	#define CONFIG_SYS_SDRAM_SIZE 0x10000000
	32
	33	#ifdef CONFIG_SPL_BUILD
	34	#define CONFIG_SYS_INIT_SP_ADDR 0x210000
	35	#else
	36	#define CONFIG_SYS_INIT_SP_ADDR \
	37	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
	38	#endif
	39
	40	/*
	41	* Environment
	42	*/
	43	#define CONFIG_ENV_IS_IN_SPI_FLASH
	44	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	45	#define CONFIG_ENV_OFFSET 0x8000
	46	#define CONFIG_ENV_SIZE 0x4000
	47	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	48	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	49	#define CONFIG_ENV_SECT_SIZE 0x1000
	50
	51	/*
	52	* U-Boot general configurations
	53	*/
	54	#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
	55
	56	/*
	57	* Serial Driver
	58	*/
	59	#define CONFIG_ATMEL_USART
	60	#define CONFIG_USART_BASE ATMEL_BASE_USART0
	61	#define CONFIG_USART_ID ATMEL_ID_USART0
	62
	63	/*
	64	* Ethernet
	65	*/
	66	#ifdef CONFIG_CMD_NET
	67	#define CONFIG_MACB
	68	#define CONFIG_RMII
	69	#define CONFIG_NET_RETRY_COUNT 20
	70	#define CONFIG_MACB_SEARCH_PHY
	71	#define CONFIG_ARP_TIMEOUT 200UL
	72	#define CONFIG_IP_DEFRAG
	73	#endif
	74
	75	/*
	76	* LCD
	77	*/
	78	#ifdef CONFIG_LCD
	79	#define CONFIG_CMD_BMP
	80	#define CONFIG_BMP_16BPP
	81	#define CONFIG_BMP_24BPP
	82	#define CONFIG_BMP_32BPP
	83	#define LCD_BPP LCD_COLOR16
	84	#define LCD_OUTPUT_BPP 24
	85	#define CONFIG_ATMEL_HLCD
	86	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	87	#endif
	88
	89	/*
90	* SD/MMC
91	*/
92	#ifdef CONFIG_CMD_MMC
93	#define CONFIG_MMC
94	#define CONFIG_GENERIC_MMC
95	#define CONFIG_GENERIC_ATMEL_MCI
96	#endif
97
98	/*
99	* SPI NOR (boot memory)
100	*/
101	#ifdef CONFIG_CMD_SF
102	#define CONFIG_ATMEL_SPI
103	#define CONFIG_ATMEL_SPI0
104	#define CONFIG_SPI_FLASH_ATMEL
105	#define CONFIG_SF_DEFAULT_BUS 0
106	#define CONFIG_SF_DEFAULT_CS 0
107	#define CONFIG_SF_DEFAULT_SPEED 30000000
108	#endif
109
110	/*
111	* USB
112	*/
113	#ifdef CONFIG_CMD_USB
114	#define CONFIG_USB_EHCI
115	#define CONFIG_USB_EHCI_ATMEL
116	#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
117	#define CONFIG_USB_STORAGE
118
119	/* USB device */
c21c28b6 MV	120	#define CONFIG_USB_ETHER
	121	#define CONFIG_USB_ETH_RNDIS
	122	#define CONFIG_USBNET_MANUFACTURER "DENX"
	123	#endif
	124
	125	/*
	126	* Boot Linux
	127	*/
	128	#define CONFIG_CMDLINE_TAG
	129	#define CONFIG_INITRD_TAG
	130	#define CONFIG_SETUP_MEMORY_TAGS
c21c28b6 MV	131	#define CONFIG_BOOTFILE "fitImage"
	132	#define CONFIG_BOOTARGS "console=ttyS3,115200"
	133	#define CONFIG_LOADADDR 0x20800000
	134	#define CONFIG_BOOTCOMMAND "run mmc_mmc"
	135	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
c21c28b6 MV	136
	137	/*
	138	* Extra Environments
	139	*/
	140	#define CONFIG_PREBOOT "run try_bootscript"
	141	#define CONFIG_HOSTNAME ma5d4evk
	142
	143	#define CONFIG_EXTRA_ENV_SETTINGS \
	144	"consdev=ttyS3\0" \
	145	"baudrate=115200\0" \
	146	"bootscript=boot.scr\0" \
	147	"bootdev=/dev/mmcblk1p1\0" \
	148	"bootpart=1:1\0" \
	149	"rootdev=/dev/mmcblk1p2\0" \
	150	"netdev=eth0\0" \
	151	"kernel_addr_r=0x22000000\0" \
	152	"update_spi_firmware_spl_addr=0x21000000\0" \
	153	"update_spi_firmware_spl_filename=boot.bin\0" \
	154	"update_spi_firmware_addr=0x22000000\0" \
	155	"update_spi_firmware_filename=u-boot.img\0" \
	156	"update_spi_firmware=" /* Update the SPI flash firmware */ \
	157	"if sf probe ; then " \
	158	"if tftp ${update_spi_firmware_spl_addr} " \
	159	"${update_spi_firmware_spl_filename} ; then " \
	160	"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
	161	"if tftp ${update_spi_firmware_addr} " \
	162	"${update_spi_firmware_filename} ; then " \
	163	"setenv update_spi_firmware_filesize ${filesize} ; " \
	164	"sf update ${update_spi_firmware_spl_addr} 0x0 " \
	165	"${update_spi_firmware_spl_filesize} ; " \
	166	"sf update ${update_spi_firmware_addr} 0x10000 " \
	167	"${update_spi_firmware_filesize} ; " \
	168	"fi ; " \
	169	"fi ; " \
	170	"fi\0" \
	171	"addcons=" \
	172	"setenv bootargs ${bootargs} " \
	173	"console=${consdev},${baudrate}\0" \
	174	"addip=" \
	175	"setenv bootargs ${bootargs} " \
	176	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	177	"${netmask}:${hostname}:${netdev}:off\0" \
	178	"addmisc=" \
	179	"setenv bootargs ${bootargs} ${miscargs}\0" \
	180	"addargs=run addcons addmisc\0" \
	181	"mmcload=" \
	182	"mmc rescan ; " \
	183	"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0" \
	184	"netload=" \
	185	"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	186	"miscargs=nohlt panic=1\0" \
	187	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
	188	"nfsargs=" \
	189	"setenv bootargs root=/dev/nfs rw " \
	190	"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
	191	"mmc_mmc=" \
	192	"run mmcload mmcargs addargs ; " \
	193	"bootm ${kernel_addr_r}\0" \
	194	"mmc_nfs=" \
	195	"run mmcload nfsargs addip addargs ; " \
	196	"bootm ${kernel_addr_r}\0" \
	197	"net_mmc=" \
	198	"run netload mmcargs addargs ; " \
	199	"bootm ${kernel_addr_r}\0" \
200	"net_nfs=" \
201	"run netload nfsargs addip addargs ; " \
202	"bootm ${kernel_addr_r}\0" \
203	"try_bootscript=" \
204	"mmc rescan;" \
205	"if test -e mmc ${bootpart} ${bootscript} ; then " \
206	"if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
207	"then ; " \
208	"echo Running bootscript... ; " \
209	"source ${kernel_addr_r} ; " \
210	"fi ; " \
211	"fi\0"
212	/* SPL */
213	#define CONFIG_SPL_FRAMEWORK
214	#define CONFIG_SPL_TEXT_BASE 0x200000
215	#define CONFIG_SPL_MAX_SIZE 0x10000
216	#define CONFIG_SPL_BSS_START_ADDR 0x20000000
217	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
218	#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
219	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
220
221	#define CONFIG_SPL_LIBCOMMON_SUPPORT
222	#define CONFIG_SPL_LIBGENERIC_SUPPORT
223	#define CONFIG_SPL_GPIO_SUPPORT
224	#define CONFIG_SPL_SERIAL_SUPPORT
225
226	#define CONFIG_SPL_BOARD_INIT
227	#define CONFIG_SYS_MONITOR_LEN (512 << 10)
228
229	#define CONFIG_SPL_SPI_SUPPORT
230	#define CONFIG_SPL_SPI_FLASH_SUPPORT
231	#define CONFIG_SPL_SPI_LOAD
232	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
233
234	#endif /* __MA5D4EVK_CONFIG_H__ */