[people/ms/u-boot.git] / include / configs / maxbcm.h

/*
 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_DB_MV7846MP_GP_H
#define _CONFIG_DB_MV7846MP_GP_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_ARMADA_XP		/* SOC Family Name */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_DISPLAY_BOARDINFO_LATE

#define	CONFIG_SYS_TEXT_BASE	0x04000000
#define CONFIG_SYS_TCLK		250000000	/* 250MHz */

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_I2C
#define CONFIG_CMD_PING
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_CMD_TFTPPUT
#define CONFIG_CMD_TIME

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MVTWSI
#define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
#define CONFIG_SYS_I2C_SLAVE		0x0
#define CONFIG_SYS_I2C_SPEED		100000

/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_SPEED		1000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SPI_FLASH_SPANSION
#define CONFIG_SPI_FLASH_BAR

/* Environment in SPI NOR flash */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */

#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
#define CONFIG_PHY_BASE_ADDR	0x0
#define CONFIG_SYS_NETA_INTERFACE_TYPE	PHY_INTERFACE_MODE_SGMII
#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
#define CONFIG_RESET_PHY_R

#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
#define CONFIG_SYS_ALT_MEMTEST

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/*
 * Memory layout while starting into the bin_hdr via the
 * BootROM:
 *
 * 0x4000.4000 - 0x4003.4000	headers space (192KiB)
 * 0x4000.4030			bin_hdr start address
 * 0x4003.4000 - 0x4004.7c00	BootROM memory allocations (15KiB)
 * 0x4007.fffc			BootROM stack top
 *
 * The address space between 0x4007.fffc and 0x400f.fff is not locked in
 * L2 cache thus cannot be used.
 */

/* SPL */
/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE		0x40004030
#define CONFIG_SPL_MAX_SIZE		((128 << 10) - 0x4030)

#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)

#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
					 CONFIG_SPL_BSS_MAX_SIZE)
#define CONFIG_SYS_SPL_MALLOC_SIZE	(16 << 10)

#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)

#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_LDSCRIPT		"arch/arm/mvebu-common/u-boot-spl.lds"

/* SPL related SPI defines */
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SPL_SPI_BUS		0
#define CONFIG_SPL_SPI_CS		0
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000

/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
#define CONFIG_SYS_MVEBU_DDR
#define CONFIG_DDR_FIXED_SIZE		(1 << 20)	/* 1GiB */

#endif /* _CONFIG_DB_MV7846MP_GP_H */
Commit	Line	Data
a4884831 SR	1	/*
	2	* Copyright (C) 2014 Stefan Roese <sr@denx.de>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef _CONFIG_DB_MV7846MP_GP_H
	8	#define _CONFIG_DB_MV7846MP_GP_H
	9
	10	/*
	11	* High Level Configuration Options (easy to change)
	12	*/
	13	#define CONFIG_ARMADA_XP /* SOC Family Name */
	14	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	15	#define CONFIG_SYS_GENERIC_BOARD
	16	#define CONFIG_DISPLAY_BOARDINFO_LATE
	17
	18	#define CONFIG_SYS_TEXT_BASE 0x04000000
	19	#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
	20
	21	/*
	22	* Commands configuration
	23	*/
	24	#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
	25	#include <config_cmd_default.h>
	26	#define CONFIG_CMD_DHCP
	27	#define CONFIG_CMD_ENV
	28	#define CONFIG_CMD_I2C
	29	#define CONFIG_CMD_PING
	30	#define CONFIG_CMD_SF
	31	#define CONFIG_CMD_SPI
	32	#define CONFIG_CMD_TFTPPUT
	33	#define CONFIG_CMD_TIME
	34
	35	/* I2C */
	36	#define CONFIG_SYS_I2C
	37	#define CONFIG_SYS_I2C_MVTWSI
dd82242b	38	#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
a4884831 SR	39	#define CONFIG_SYS_I2C_SLAVE 0x0
	40	#define CONFIG_SYS_I2C_SPEED 100000
	41
	42	/* SPI NOR flash default params, used by sf commands */
	43	#define CONFIG_SF_DEFAULT_SPEED 1000000
	44	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
	45	#define CONFIG_SPI_FLASH_STMICRO
68102b81 SR	46	#define CONFIG_SPI_FLASH_SPANSION
68102b81 SR	47	#define CONFIG_SPI_FLASH_BAR
a4884831 SR	48
	49	/* Environment in SPI NOR flash */
	50	#define CONFIG_ENV_IS_IN_SPI_FLASH
	51	#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
	52	#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
	53	#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
	54
	55	#define CONFIG_PHY_MARVELL /* there is a marvell phy */
	56	#define CONFIG_PHY_BASE_ADDR 0x0
	57	#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
	58	#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
	59	#define CONFIG_RESET_PHY_R
	60
	61	#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
	62	#define CONFIG_SYS_ALT_MEMTEST
	63
	64	/*
	65	* mv-common.h should be defined after CMD configs since it used them
	66	* to enable certain macros
	67	*/
	68	#include "mv-common.h"
	69
e7778ec1 SR	70	/*
	71	* Memory layout while starting into the bin_hdr via the
	72	* BootROM:
	73	*
	74	* 0x4000.4000 - 0x4003.4000 headers space (192KiB)
	75	* 0x4000.4030 bin_hdr start address
	76	* 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
	77	* 0x4007.fffc BootROM stack top
	78	*
	79	* The address space between 0x4007.fffc and 0x400f.fff is not locked in
	80	* L2 cache thus cannot be used.
	81	*/
	82
	83	/* SPL */
	84	/* Defines for SPL */
	85	#define CONFIG_SPL_FRAMEWORK
	86	#define CONFIG_SPL_TEXT_BASE 0x40004030
	87	#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
	88
	89	#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
	90	#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
	91
	92	#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
	93	CONFIG_SPL_BSS_MAX_SIZE)
	94	#define CONFIG_SYS_SPL_MALLOC_SIZE (16 << 10)
	95
	96	#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
	97	#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
	98
	99	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	100	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	101	#define CONFIG_SPL_SERIAL_SUPPORT
	102	#define CONFIG_SPL_I2C_SUPPORT
	103	#define CONFIG_SPL_LDSCRIPT "arch/arm/mvebu-common/u-boot-spl.lds"
	104
	105	/* SPL related SPI defines */
	106	#define CONFIG_SPL_SPI_SUPPORT
	107	#define CONFIG_SPL_SPI_FLASH_SUPPORT
	108	#define CONFIG_SPL_SPI_LOAD
	109	#define CONFIG_SPL_SPI_BUS 0
	110	#define CONFIG_SPL_SPI_CS 0
	111	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
	112
	113	/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
	114	#define CONFIG_SYS_MVEBU_DDR
	115	#define CONFIG_DDR_FIXED_SIZE (1 << 20) /* 1GiB */
	116
a4884831	117	#endif /* _CONFIG_DB_MV7846MP_GP_H */