projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 76316a31 | 1 | /* |
| 4aecfb16 | 2 | * (C) Copyright 2007-2010 Michal Simek |
| 76316a31 | 3 | * |
| cb1bc63b | 4 | * Michal SIMEK <monstr@monstr.eu> |
| 76316a31 | 5 | * |
| 1a459660 | 6 | * SPDX-License-Identifier: GPL-2.0+ |
| 76316a31 MS |
7 | */ |
| 8 | ||
| 9 | #ifndef __CONFIG_H | |
| 10 | #define __CONFIG_H | |
| 11 | ||
| 52a822ed | 12 | #include "../board/xilinx/microblaze-generic/xparameters.h" |
| 76316a31 | 13 | |
| 4aecfb16 | 14 | /* MicroBlaze CPU */ |
| 1a50f164 | 15 | #define MICROBLAZE_V5 1 |
| 76316a31 | 16 | |
| bcec8f49 | 17 | /* linear and spi flash memory */ |
| 1fe7e8fa SL |
18 | #ifdef XILINX_FLASH_START |
| 19 | #define FLASH | |
| bcec8f49 | 20 | #undef SPIFLASH |
| 1fe7e8fa SL |
21 | #undef RAMENV /* hold environment in flash */ |
| 22 | #else | |
| bcec8f49 | 23 | #ifdef XILINX_SPI_FLASH_BASEADDR |
| 1fe7e8fa | 24 | #undef FLASH |
| bcec8f49 SL |
25 | #define SPIFLASH |
| 26 | #undef RAMENV /* hold environment in flash */ | |
| 27 | #else | |
| 28 | #undef FLASH | |
| 29 | #undef SPIFLASH | |
| 1fe7e8fa SL |
30 | #define RAMENV /* hold environment in RAM */ |
| 31 | #endif | |
| bcec8f49 | 32 | #endif |
| 1fe7e8fa | 33 | |
| 76316a31 | 34 | /* uart */ |
| 67659e2e MS |
35 | # define CONFIG_BAUDRATE 115200 |
| 36 | /* The following table includes the supported baudrates */ | |
| 37 | # define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 38 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} | |
| 39 | ||
| 76316a31 | 40 | /* setting reset address */ |
| 14d0a02a | 41 | /*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/ |
| 76316a31 MS |
42 | |
| 43 | /* gpio */ | |
| 4c6a6f02 | 44 | #ifdef XILINX_GPIO_BASEADDR |
| 4e779ad2 | 45 | # define CONFIG_XILINX_GPIO |
| 4aecfb16 | 46 | # define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR |
| 4c6a6f02 | 47 | #endif |
| 76316a31 | 48 | |
| 0f21f98d MS |
49 | /* watchdog */ |
| 50 | #if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ) | |
| 51 | # define CONFIG_WATCHDOG_BASEADDR XILINX_WATCHDOG_BASEADDR | |
| 52 | # define CONFIG_WATCHDOG_IRQ XILINX_WATCHDOG_IRQ | |
| b5e9b9a9 MS |
53 | # ifndef CONFIG_SPL_BUILD |
| 54 | # define CONFIG_HW_WATCHDOG | |
| 55 | # define CONFIG_XILINX_TB_WATCHDOG | |
| 56 | # endif | |
| 0f21f98d MS |
57 | #endif |
| 58 | ||
| e945f6dc MS |
59 | #define CONFIG_SYS_MALLOC_LEN 0xC0000 |
| 60 | ||
| 61 | /* Stack location before relocation */ | |
| 4fcd0b33 MS |
62 | #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - \ |
| 63 | CONFIG_SYS_MALLOC_F_LEN) | |
| 76316a31 | 64 | |
| 8f371b18 SL |
65 | /* |
| 66 | * CFI flash memory layout - Example | |
| 67 | * CONFIG_SYS_FLASH_BASE = 0x2200_0000; | |
| 68 | * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB | |
| 69 | * | |
| 70 | * SECT_SIZE = 0x20000; 128kB is one sector | |
| 71 | * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store | |
| 72 | * | |
| 73 | * 0x2200_0000 CONFIG_SYS_FLASH_BASE | |
| 74 | * FREE 256kB | |
| 75 | * 0x2204_0000 CONFIG_ENV_ADDR | |
| 76 | * ENV_AREA 128kB | |
| 77 | * 0x2206_0000 | |
| 78 | * FREE | |
| 79 | * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE | |
| 80 | * | |
| 81 | */ | |
| 82 | ||
| 76316a31 | 83 | #ifdef FLASH |
| 4aecfb16 MS |
84 | # define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START |
| 85 | # define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE | |
| 86 | # define CONFIG_SYS_FLASH_CFI 1 | |
| 87 | # define CONFIG_FLASH_CFI_DRIVER 1 | |
| 88 | /* ?empty sector */ | |
| 89 | # define CONFIG_SYS_FLASH_EMPTY_INFO 1 | |
| 90 | /* max number of memory banks */ | |
| 91 | # define CONFIG_SYS_MAX_FLASH_BANKS 1 | |
| 92 | /* max number of sectors on one chip */ | |
| 93 | # define CONFIG_SYS_MAX_FLASH_SECT 512 | |
| 94 | /* hardware flash protection */ | |
| 95 | # define CONFIG_SYS_FLASH_PROTECTION | |
| 22ff7f4d MS |
96 | /* use buffered writes (20x faster) */ |
| 97 | # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 | |
| 4aecfb16 MS |
98 | # ifdef RAMENV |
| 99 | # define CONFIG_ENV_IS_NOWHERE 1 | |
| 100 | # define CONFIG_ENV_SIZE 0x1000 | |
| 101 | # define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) | |
| 102 | ||
| bcec8f49 | 103 | # else /* FLASH && !RAMENV */ |
| 4aecfb16 MS |
104 | # define CONFIG_ENV_IS_IN_FLASH 1 |
| 105 | /* 128K(one sector) for env */ | |
| 106 | # define CONFIG_ENV_SECT_SIZE 0x20000 | |
| 107 | # define CONFIG_ENV_ADDR \ | |
| 108 | (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) | |
| 109 | # define CONFIG_ENV_SIZE 0x20000 | |
| bcec8f49 | 110 | # endif /* FLASH && !RAMBOOT */ |
| 76316a31 | 111 | #else /* !FLASH */ |
| bcec8f49 SL |
112 | |
| 113 | #ifdef SPIFLASH | |
| 114 | # define CONFIG_SYS_NO_FLASH 1 | |
| 115 | # define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR | |
| bcec8f49 | 116 | # define CONFIG_SPI 1 |
| bcec8f49 SL |
117 | # define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 |
| 118 | # define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ | |
| 119 | # define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS | |
| 120 | ||
| 121 | # ifdef RAMENV | |
| 122 | # define CONFIG_ENV_IS_NOWHERE 1 | |
| 123 | # define CONFIG_ENV_SIZE 0x1000 | |
| 124 | # define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) | |
| 125 | ||
| 126 | # else /* SPIFLASH && !RAMENV */ | |
| 127 | # define CONFIG_ENV_IS_IN_SPI_FLASH 1 | |
| 128 | # define CONFIG_ENV_SPI_MODE SPI_MODE_3 | |
| 129 | # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED | |
| 130 | # define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS | |
| 131 | /* 128K(two sectors) for env */ | |
| 132 | # define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 133 | # define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE) | |
| 134 | /* Warning: adjust the offset in respect of other flash content and size */ | |
| 135 | # define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */ | |
| 136 | # endif /* SPIFLASH && !RAMBOOT */ | |
| 137 | #else /* !SPIFLASH */ | |
| 138 | ||
| 4aecfb16 MS |
139 | /* ENV in RAM */ |
| 140 | # define CONFIG_SYS_NO_FLASH 1 | |
| 141 | # define CONFIG_ENV_IS_NOWHERE 1 | |
| 142 | # define CONFIG_ENV_SIZE 0x1000 | |
| 143 | # define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) | |
| bcec8f49 | 144 | #endif /* !SPIFLASH */ |
| 76316a31 MS |
145 | #endif /* !FLASH */ |
| 146 | ||
| e9b737de | 147 | #if defined(XILINX_USE_ICACHE) |
| 4aecfb16 | 148 | # define CONFIG_ICACHE |
| e9b737de | 149 | #else |
| 4aecfb16 | 150 | # undef CONFIG_ICACHE |
| e9b737de MS |
151 | #endif |
| 152 | ||
| 153 | #if defined(XILINX_USE_DCACHE) | |
| 4aecfb16 | 154 | # define CONFIG_DCACHE |
| e9b737de | 155 | #else |
| 4aecfb16 | 156 | # undef CONFIG_DCACHE |
| e9b737de MS |
157 | #endif |
| 158 | ||
| 5811830f MS |
159 | #ifndef XILINX_DCACHE_BYTE_SIZE |
| 160 | #define XILINX_DCACHE_BYTE_SIZE 32768 | |
| 161 | #endif | |
| 162 | ||
| 079a136c JL |
163 | /* |
| 164 | * BOOTP options | |
| 165 | */ | |
| 166 | #define CONFIG_BOOTP_BOOTFILESIZE | |
| 167 | #define CONFIG_BOOTP_BOOTPATH | |
| 168 | #define CONFIG_BOOTP_GATEWAY | |
| 169 | #define CONFIG_BOOTP_HOSTNAME | |
| 76316a31 | 170 | |
| 5dc11a51 JL |
171 | /* |
| 172 | * Command line configuration. | |
| 173 | */ | |
| 5dc11a51 | 174 | #define CONFIG_CMD_IRQ |
| 5dc11a51 | 175 | #define CONFIG_CMD_MFSL |
| 4d49b280 | 176 | |
| 5dc11a51 | 177 | #if defined(FLASH) |
| 4aecfb16 | 178 | # define CONFIG_CMD_JFFS2 |
| 7cfb13a7 | 179 | # undef CONFIG_CMD_UBIFS |
| 4aecfb16 | 180 | |
| bcec8f49 | 181 | # if !defined(RAMENV) |
| bcec8f49 SL |
182 | # define CONFIG_CMD_SAVES |
| 183 | # endif | |
| 184 | ||
| 185 | #else | |
| 186 | #if defined(SPIFLASH) | |
| bcec8f49 | 187 | |
| 4aecfb16 | 188 | # if !defined(RAMENV) |
| 4aecfb16 MS |
189 | # define CONFIG_CMD_SAVES |
| 190 | # endif | |
| 853643d8 | 191 | #else |
| 4aecfb16 | 192 | # undef CONFIG_CMD_JFFS2 |
| 2cce2d32 | 193 | # undef CONFIG_CMD_UBIFS |
| 5dc11a51 | 194 | #endif |
| bcec8f49 | 195 | #endif |
| 76316a31 | 196 | |
| 5dc11a51 | 197 | #if defined(CONFIG_CMD_JFFS2) |
| 7cfb13a7 SL |
198 | # define CONFIG_MTD_PARTITIONS |
| 199 | #endif | |
| 200 | ||
| 201 | #if defined(CONFIG_CMD_UBIFS) | |
| 7cfb13a7 SL |
202 | # define CONFIG_LZO |
| 203 | #endif | |
| 204 | ||
| 205 | #if defined(CONFIG_CMD_UBI) | |
| 206 | # define CONFIG_MTD_PARTITIONS | |
| 207 | # define CONFIG_RBTREE | |
| 208 | #endif | |
| 209 | ||
| 210 | #if defined(CONFIG_MTD_PARTITIONS) | |
| 211 | /* MTD partitions */ | |
| 68d7d651 | 212 | #define CONFIG_CMD_MTDPARTS /* mtdparts command line support */ |
| 942556a9 SR |
213 | #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ |
| 214 | #define CONFIG_FLASH_CFI_MTD | |
| c82a541d | 215 | #define MTDIDS_DEFAULT "nor0=flash-0" |
| 144876a3 MS |
216 | |
| 217 | /* default mtd partition table */ | |
| c82a541d | 218 | #define MTDPARTS_DEFAULT "mtdparts=flash-0:256k(u-boot),"\ |
| 144876a3 MS |
219 | "256k(env),3m(kernel),1m(romfs),"\ |
| 220 | "1m(cramfs),-(jffs2)" | |
| 221 | #endif | |
| 222 | ||
| 4aecfb16 MS |
223 | /* size of console buffer */ |
| 224 | #define CONFIG_SYS_CBSIZE 512 | |
| 225 | /* print buffer size */ | |
| 226 | #define CONFIG_SYS_PBSIZE \ | |
| 227 | (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) | |
| 228 | /* max number of command args */ | |
| 229 | #define CONFIG_SYS_MAXARGS 15 | |
| 6d0f6bcf | 230 | #define CONFIG_SYS_LONGHELP |
| 4aecfb16 | 231 | /* default load address */ |
| 44a3a91c | 232 | #define CONFIG_SYS_LOAD_ADDR 0 |
| 76316a31 | 233 | |
| 76316a31 | 234 | #define CONFIG_BOOTARGS "root=romfs" |
| 330e5545 | 235 | #define CONFIG_HOSTNAME XILINX_BOARD_NAME |
| 853643d8 | 236 | #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" |
| 76316a31 MS |
237 | |
| 238 | /* architecture dependent code */ | |
| 6d0f6bcf | 239 | #define CONFIG_SYS_USR_EXCEP /* user exception */ |
| 76316a31 | 240 | |
| 0900bee9 | 241 | #define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo" |
| 144876a3 | 242 | |
| 2902a9b7 | 243 | #ifndef CONFIG_EXTRA_ENV_SETTINGS |
| 4aecfb16 | 244 | #define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \ |
| c82a541d SL |
245 | "nor0=flash-0\0"\ |
| 246 | "mtdparts=mtdparts=flash-0:"\ | |
| 144876a3 | 247 | "256k(u-boot),256k(env),3m(kernel),"\ |
| 78376452 MS |
248 | "1m(romfs),1m(cramfs),-(jffs2)\0"\ |
| 249 | "nc=setenv stdout nc;"\ | |
| 250 | "setenv stdin nc\0" \ | |
| 251 | "serial=setenv stdout serial;"\ | |
| 252 | "setenv stdin serial\0" | |
| 2902a9b7 | 253 | #endif |
| 144876a3 | 254 | |
| 188dc16b | 255 | #define CONFIG_CMDLINE_EDITING |
| 188dc16b | 256 | |
| 37e892d9 MS |
257 | /* Enable flat device tree support */ |
| 258 | #define CONFIG_LMB 1 | |
| 37e892d9 | 259 | |
| 4632b1ea | 260 | #if defined(CONFIG_XILINX_AXIEMAC) |
| f5e5e1ff | 261 | # define CONFIG_MII 1 |
| f5e5e1ff SL |
262 | # define CONFIG_PHY_GIGE 1 |
| 263 | # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 | |
| f5e5e1ff SL |
264 | # define CONFIG_PHY_ATHEROS 1 |
| 265 | # define CONFIG_PHY_BROADCOM 1 | |
| 266 | # define CONFIG_PHY_DAVICOM 1 | |
| 267 | # define CONFIG_PHY_LXT 1 | |
| 268 | # define CONFIG_PHY_MARVELL 1 | |
| 269 | # define CONFIG_PHY_MICREL 1 | |
| 2014a3de | 270 | # define CONFIG_PHY_MICREL_KSZ9021 |
| f5e5e1ff SL |
271 | # define CONFIG_PHY_NATSEMI 1 |
| 272 | # define CONFIG_PHY_REALTEK 1 | |
| 273 | # define CONFIG_PHY_VITESSE 1 | |
| 274 | #else | |
| 275 | # undef CONFIG_MII | |
| f5e5e1ff SL |
276 | #endif |
| 277 | ||
| 9d242745 | 278 | /* SPL part */ |
| 9d242745 MS |
279 | #define CONFIG_CMD_SPL |
| 280 | #define CONFIG_SPL_FRAMEWORK | |
| 9d242745 MS |
281 | #define CONFIG_SPL_BOARD_INIT |
| 282 | ||
| 283 | #define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" | |
| 284 | ||
| 4dd09742 | 285 | #ifdef CONFIG_SYS_FLASH_BASE |
| 4dd09742 MS |
286 | # define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE |
| 287 | #endif | |
| 9d242745 MS |
288 | |
| 289 | /* for booting directly linux */ | |
| 9d242745 | 290 | |
| 9d242745 MS |
291 | #define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \ |
| 292 | 0x40000) | |
| 5aa79f26 | 293 | #define CONFIG_SYS_FDT_SIZE (16<<10) |
| 9d242745 MS |
294 | #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \ |
| 295 | 0x1000000) | |
| 296 | ||
| 297 | /* SP location before relocation, must use scratch RAM */ | |
| 298 | /* BRAM start */ | |
| 299 | #define CONFIG_SYS_INIT_RAM_ADDR 0x0 | |
| 300 | /* BRAM size - will be generated */ | |
| ca7d2266 | 301 | #define CONFIG_SYS_INIT_RAM_SIZE 0x100000 |
| 9d242745 | 302 | |
| ca7d2266 MS |
303 | # define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ |
| 304 | CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 305 | CONFIG_SYS_MALLOC_F_LEN) | |
| 9d242745 MS |
306 | |
| 307 | /* Just for sure that there is a space for stack */ | |
| 308 | #define CONFIG_SPL_STACK_SIZE 0x100 | |
| 309 | ||
| 9d242745 MS |
310 | #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE |
| 311 | ||
| 312 | #define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 313 | CONFIG_SYS_INIT_RAM_ADDR - \ | |
| ca7d2266 | 314 | CONFIG_SYS_MALLOC_F_LEN - \ |
| 9d242745 MS |
315 | CONFIG_SPL_STACK_SIZE) |
| 316 | ||
| 76316a31 | 317 | #endif /* __CONFIG_H */ |