[people/ms/u-boot.git] / include / configs / mvebu_armada-37xx.h

/*
 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_MVEBU_ARMADA_37XX_H
#define _CONFIG_MVEBU_ARMADA_37XX_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_DISPLAY_BOARDINFO_LATE

/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE	0x00000000

#define CONFIG_NR_DRAM_BANKS	1

/* auto boot */
#define CONFIG_PREBOOT

#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
					  115200, 230400, 460800, 921600 }

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
#define CONFIG_INITRD_TAG		/* enable INITRD tag */
#define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */

#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	(4 << 20) /* 4MiB for malloc() */

/*
 * Other required minimal configurations
 */
#define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
#define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
#define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
#define CONFIG_SYS_MAXARGS	32	/* max number of command args */

#define CONFIG_SYS_ALT_MEMTEST

/* End of 16M scrubbed by training in bootrom */
#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)

/*
 * I2C
 */
#define CONFIG_I2C_MV
#define CONFIG_SYS_I2C_SLAVE		0x0

/*
 * SPI Flash configuration
 */
#define CONFIG_ENV_SPI_BUS		0
#define CONFIG_ENV_SPI_CS		0

/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_SPEED		1000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE

/* Environment in SPI NOR flash */
#define CONFIG_ENV_OFFSET		0x180000 /* as Marvell U-Boot version */
#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */

/*
 * Ethernet Driver configuration
 */
#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
#define CONFIG_ARP_TIMEOUT	200
#define CONFIG_NET_RETRY_COUNT	50
#define CONFIG_PHY_MARVELL

#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)

/* USB ethernet */

/*
 * SATA/SCSI/AHCI configuration
 */
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_LBA48
#define CONFIG_SYS_64BIT_LBA

#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
					 CONFIG_SYS_SCSI_MAX_LUN)

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 1) \
	func(MMC, mmc, 0) \
	func(USB, usb, 0) \
	func(SCSI, scsi, 0) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

#include <config_distro_bootcmd.h>

#define CONFIG_EXTRA_ENV_SETTINGS	\
	"scriptaddr=0x4d00000\0"	\
	"pxefile_addr_r=0x4e00000\0"	\
	"fdt_addr_r=0x4f00000\0"	\
	"kernel_addr_r=0x5000000\0"	\
	"ramdisk_addr_r=0x8000000\0"	\
	BOOTENV

#endif /* _CONFIG_MVEBU_ARMADA_37XX_H */
Commit	Line	Data
01e62c7f SR	1	/*
	2	* Copyright (C) 2016 Stefan Roese <sr@denx.de>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
c5330ae8 KP	7	#ifndef _CONFIG_MVEBU_ARMADA_37XX_H
c5330ae8 KP	8	#define _CONFIG_MVEBU_ARMADA_37XX_H
01e62c7f SR	9
	10	/*
	11	* High Level Configuration Options (easy to change)
	12	*/
	13	#define CONFIG_DISPLAY_BOARDINFO_LATE
01e62c7f	14
01e62c7f SR	15	/* additions for new ARM relocation support */
	16	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	17
	18	#define CONFIG_NR_DRAM_BANKS 1
	19
	20	/* auto boot */
	21	#define CONFIG_PREBOOT
	22
01e62c7f SR	23	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
	24	115200, 230400, 460800, 921600 }
	25
	26	/*
	27	* For booting Linux, the board info and command line data
	28	* have to be in the first 8 MB of memory, since this is
	29	* the maximum mapped by the Linux kernel during initialization.
	30	*/
	31	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	32	#define CONFIG_INITRD_TAG /* enable INITRD tag */
	33	#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
	34
	35	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
01e62c7f SR	36
	37	/*
	38	* Size of malloc() pool
	39	*/
	40	#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
	41
	42	/*
	43	* Other required minimal configurations
	44	*/
01e62c7f	45	#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
01e62c7f SR	46	#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
	47	#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
	48	#define CONFIG_SYS_MEMTEST_END 0x00ffffff /(_16M -1) /
	49	#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
	50	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
	51
01e62c7f SR	52	#define CONFIG_SYS_ALT_MEMTEST
	53
	54	/* End of 16M scrubbed by training in bootrom */
	55	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
	56
	57	/*
	58	* I2C
	59	*/
	60	#define CONFIG_I2C_MV
	61	#define CONFIG_SYS_I2C_SLAVE 0x0
	62
	63	/*
	64	* SPI Flash configuration
	65	*/
	66	#define CONFIG_ENV_SPI_BUS 0
	67	#define CONFIG_ENV_SPI_CS 0
	68
	69	/* SPI NOR flash default params, used by sf commands */
	70	#define CONFIG_SF_DEFAULT_SPEED 1000000
	71	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	72	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	73
	74	/* Environment in SPI NOR flash */
01e62c7f SR	75	#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
	76	#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
	77	#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
	78
	79	/*
	80	* Ethernet Driver configuration
	81	*/
01e62c7f	82	#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
01e62c7f SR	83	#define CONFIG_ARP_TIMEOUT 200
01e62c7f SR	84	#define CONFIG_NET_RETRY_COUNT 50
a7a0d788	85	#define CONFIG_PHY_MARVELL
01e62c7f	86
cbb89ed0	87	#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
01e62c7f SR	88
01e62c7f SR	89	/* USB ethernet */
01e62c7f SR	90
	91	/*
	92	* SATA/SCSI/AHCI configuration
	93	*/
01e62c7f	94	#define CONFIG_SCSI_AHCI_PLAT
01e62c7f SR	95	#define CONFIG_LBA48
	96	#define CONFIG_SYS_64BIT_LBA
	97
	98	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
	99	#define CONFIG_SYS_SCSI_MAX_LUN 1
	100	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	101	CONFIG_SYS_SCSI_MAX_LUN)
	102
6779d65b AH	103	#define BOOT_TARGET_DEVICES(func) \
	104	func(MMC, mmc, 1) \
	105	func(MMC, mmc, 0) \
	106	func(USB, usb, 0) \
	107	func(SCSI, scsi, 0) \
	108	func(PXE, pxe, na) \
	109	func(DHCP, dhcp, na)
	110
	111	#include <config_distro_bootcmd.h>
	112
e1489ba8 AH	113	#define CONFIG_EXTRA_ENV_SETTINGS \
	114	"scriptaddr=0x4d00000\0" \
	115	"pxefile_addr_r=0x4e00000\0" \
	116	"fdt_addr_r=0x4f00000\0" \
	117	"kernel_addr_r=0x5000000\0" \
6779d65b AH	118	"ramdisk_addr_r=0x8000000\0" \
6779d65b AH	119	BOOTENV
e1489ba8	120
c5330ae8	121	#endif /* _CONFIG_MVEBU_ARMADA_37XX_H */