[people/ms/u-boot.git] / include / configs / mvebu_armada-8k.h

/*
 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_MVEBU_ARMADA_8K_H
#define _CONFIG_MVEBU_ARMADA_8K_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_SYS_TCLK		250000000	/* 250MHz */

#define CONFIG_DISPLAY_BOARDINFO_LATE

#define	CONFIG_SYS_TEXT_BASE	0x00000000

/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE	0x00000000

#define CONFIG_NR_DRAM_BANKS	1

/* auto boot */
#define CONFIG_PREBOOT

#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
					  115200, 230400, 460800, 921600 }

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
#define CONFIG_INITRD_TAG		/* enable INITRD tag */
#define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */

#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	(4 << 20) /* 4MiB for malloc() */

/*
 * Other required minimal configurations
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
#define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
#define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
#define CONFIG_SYS_MAXARGS	32	/* max number of command args */

#define CONFIG_SYS_ALT_MEMTEST

/* End of 16M scrubbed by training in bootrom */
#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)

/*
 * SPI Flash configuration
 */
#define CONFIG_KIRKWOOD_SPI
#define CONFIG_ENV_SPI_BUS		0
#define CONFIG_ENV_SPI_CS		0

/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_SPEED		1000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE

#define CONFIG_ENV_OFFSET		0x180000 /* as Marvell U-Boot version */
#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */

#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_MAX_CHIPS	1
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_USE_FLASH_BBT

/*
 * Ethernet Driver configuration
 */
#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
#define CONFIG_ARP_TIMEOUT	200
#define CONFIG_NET_RETRY_COUNT	50

#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)

/* USB ethernet */

/*
 * SATA/SCSI/AHCI configuration
 */
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_LBA48
#define CONFIG_SYS_64BIT_LBA

#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
					 CONFIG_SYS_SCSI_MAX_LUN)

#define CONFIG_SUPPORT_VFAT

/*
 * PCI configuration
 */
#ifdef CONFIG_PCIE_DW_MVEBU
#define CONFIG_E1000
#endif

#endif /* _CONFIG_MVEBU_ARMADA_8K_H */
Commit	Line	Data
6f8c2d49 SR	1	/*
	2	* Copyright (C) 2016 Stefan Roese <sr@denx.de>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
633fa0e7 SR	7	#ifndef _CONFIG_MVEBU_ARMADA_8K_H
633fa0e7 SR	8	#define _CONFIG_MVEBU_ARMADA_8K_H
6f8c2d49 SR	9
	10	/*
	11	* High Level Configuration Options (easy to change)
	12	*/
	13	#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
	14
	15	#define CONFIG_DISPLAY_BOARDINFO_LATE
6f8c2d49 SR	16
	17	#define CONFIG_SYS_TEXT_BASE 0x00000000
	18
	19	/* additions for new ARM relocation support */
	20	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	21
	22	#define CONFIG_NR_DRAM_BANKS 1
	23
	24	/* auto boot */
	25	#define CONFIG_PREBOOT
	26
6f8c2d49 SR	27	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
	28	115200, 230400, 460800, 921600 }
	29
	30	/*
	31	* For booting Linux, the board info and command line data
	32	* have to be in the first 8 MB of memory, since this is
	33	* the maximum mapped by the Linux kernel during initialization.
	34	*/
	35	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	36	#define CONFIG_INITRD_TAG /* enable INITRD tag */
	37	#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
	38
	39	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
6f8c2d49 SR	40
	41	/*
	42	* Size of malloc() pool
	43	*/
	44	#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
	45
	46	/*
	47	* Other required minimal configurations
	48	*/
	49	#define CONFIG_SYS_LONGHELP
	50	#define CONFIG_AUTO_COMPLETE
	51	#define CONFIG_CMDLINE_EDITING
6f8c2d49	52	#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
6f8c2d49 SR	53	#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
	54	#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
	55	#define CONFIG_SYS_MEMTEST_END 0x00ffffff /(_16M -1) /
	56	#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
	57	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
	58
6f8c2d49 SR	59	#define CONFIG_SYS_ALT_MEMTEST
	60
	61	/* End of 16M scrubbed by training in bootrom */
	62	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
	63
	64	/*
	65	* SPI Flash configuration
	66	*/
	67	#define CONFIG_KIRKWOOD_SPI
	68	#define CONFIG_ENV_SPI_BUS 0
	69	#define CONFIG_ENV_SPI_CS 0
	70
	71	/* SPI NOR flash default params, used by sf commands */
	72	#define CONFIG_SF_DEFAULT_SPEED 1000000
	73	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	74	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	75
6f8c2d49 SR	76	#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
	77	#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
	78	#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
	79
f59472e8 KP	80	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	81	#define CONFIG_SYS_NAND_MAX_CHIPS 1
	82	#define CONFIG_SYS_NAND_ONFI_DETECTION
	83	#define CONFIG_SYS_NAND_USE_FLASH_BBT
	84
def84429 SR	85	/*
	86	* Ethernet Driver configuration
	87	*/
	88	#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
def84429 SR	89	#define CONFIG_ARP_TIMEOUT 200
	90	#define CONFIG_NET_RETRY_COUNT 50
	91
cbb89ed0	92	#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
6f8c2d49 SR	93
6f8c2d49 SR	94	/* USB ethernet */
6f8c2d49 SR	95
	96	/*
	97	* SATA/SCSI/AHCI configuration
	98	*/
6f8c2d49	99	#define CONFIG_SCSI_AHCI_PLAT
6f8c2d49 SR	100	#define CONFIG_LBA48
	101	#define CONFIG_SYS_64BIT_LBA
	102
	103	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
	104	#define CONFIG_SYS_SCSI_MAX_LUN 1
	105	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	106	CONFIG_SYS_SCSI_MAX_LUN)
	107
	108	#define CONFIG_SUPPORT_VFAT
	109
1ec5aa63 SR	110	/*
	111	* PCI configuration
	112	*/
	113	#ifdef CONFIG_PCIE_DW_MVEBU
	114	#define CONFIG_E1000
1ec5aa63 SR	115	#endif
1ec5aa63 SR	116
633fa0e7	117	#endif /* _CONFIG_MVEBU_ARMADA_8K_H */