[people/ms/u-boot.git] / include / configs / mvebu_db-88f3720.h

/*
 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_MVEBU_DB_88F3720_H
#define _CONFIG_MVEBU_DB_88F3720_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_DISPLAY_BOARDINFO_LATE

#define	CONFIG_SYS_TEXT_BASE	0x00000000

/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE	0x00000000

#define CONFIG_NR_DRAM_BANKS	1

/* auto boot */
#define CONFIG_PREBOOT

#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
					  115200, 230400, 460800, 921600 }

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
#define CONFIG_INITRD_TAG		/* enable INITRD tag */
#define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */

#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	(4 << 20) /* 4MiB for malloc() */

/*
 * Other required minimal configurations
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
#define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
#define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
#define CONFIG_SYS_MAXARGS	32	/* max number of command args */

#define CONFIG_SYS_ALT_MEMTEST

/* End of 16M scrubbed by training in bootrom */
#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)

/*
 * I2C
 */
#define CONFIG_I2C_MV
#define CONFIG_SYS_I2C_SLAVE		0x0

/*
 * SPI Flash configuration
 */
#define CONFIG_ENV_SPI_BUS		0
#define CONFIG_ENV_SPI_CS		0

/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_SPEED		1000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE

/* Environment in SPI NOR flash */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET		0x180000 /* as Marvell U-Boot version */
#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */

/*
 * Ethernet Driver configuration
 */
#define CONFIG_MVNETA		/* Enable Marvell Gbe Controller Driver */
#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
#define CONFIG_PHY_GIGE		/* GbE speed/duplex detect */
#define CONFIG_ARP_TIMEOUT	200
#define CONFIG_NET_RETRY_COUNT	50

/* USB 2.0 */
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3

/* USB 3.0 */
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3

#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
					 CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)

/* USB ethernet */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830
#define CONFIG_USB_ETHER_RTL8152
#define CONFIG_USB_ETHER_SMSC95XX

/*
 * SATA/SCSI/AHCI configuration
 */
#define CONFIG_SCSI
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_LIBATA
#define CONFIG_LBA48
#define CONFIG_SYS_64BIT_LBA

#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
					 CONFIG_SYS_SCSI_MAX_LUN)

#define CONFIG_SUPPORT_VFAT

#endif /* _CONFIG_MVEBU_DB_88F3720_H */
Commit	Line	Data
01e62c7f SR	1	/*
	2	* Copyright (C) 2016 Stefan Roese <sr@denx.de>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef _CONFIG_MVEBU_DB_88F3720_H
	8	#define _CONFIG_MVEBU_DB_88F3720_H
	9
	10	/*
	11	* High Level Configuration Options (easy to change)
	12	*/
	13	#define CONFIG_DISPLAY_BOARDINFO_LATE
01e62c7f SR	14
	15	#define CONFIG_SYS_TEXT_BASE 0x00000000
	16
	17	/* additions for new ARM relocation support */
	18	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	19
	20	#define CONFIG_NR_DRAM_BANKS 1
	21
	22	/* auto boot */
	23	#define CONFIG_PREBOOT
	24
	25	#define CONFIG_BAUDRATE 115200
	26	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
	27	115200, 230400, 460800, 921600 }
	28
	29	/*
	30	* For booting Linux, the board info and command line data
	31	* have to be in the first 8 MB of memory, since this is
	32	* the maximum mapped by the Linux kernel during initialization.
	33	*/
	34	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	35	#define CONFIG_INITRD_TAG /* enable INITRD tag */
	36	#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
	37
	38	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
	39	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
	40	+sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
	41
	42	/*
	43	* Size of malloc() pool
	44	*/
	45	#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
	46
	47	/*
	48	* Other required minimal configurations
	49	*/
	50	#define CONFIG_SYS_LONGHELP
	51	#define CONFIG_AUTO_COMPLETE
	52	#define CONFIG_CMDLINE_EDITING
01e62c7f	53	#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
01e62c7f SR	54	#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
	55	#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
	56	#define CONFIG_SYS_MEMTEST_END 0x00ffffff /(_16M -1) /
	57	#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
	58	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
	59
01e62c7f SR	60	#define CONFIG_SYS_ALT_MEMTEST
	61
	62	/* End of 16M scrubbed by training in bootrom */
	63	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
	64
	65	/*
	66	* I2C
	67	*/
	68	#define CONFIG_I2C_MV
	69	#define CONFIG_SYS_I2C_SLAVE 0x0
	70
	71	/*
	72	* SPI Flash configuration
	73	*/
	74	#define CONFIG_ENV_SPI_BUS 0
	75	#define CONFIG_ENV_SPI_CS 0
	76
	77	/* SPI NOR flash default params, used by sf commands */
	78	#define CONFIG_SF_DEFAULT_SPEED 1000000
	79	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	80	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	81
	82	/* Environment in SPI NOR flash */
01e62c7f SR	83	#define CONFIG_ENV_IS_IN_SPI_FLASH
	84	#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
	85	#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
	86	#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
	87
	88	/*
	89	* Ethernet Driver configuration
	90	*/
	91	#define CONFIG_MVNETA /* Enable Marvell Gbe Controller Driver */
	92	#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
	93	#define CONFIG_PHY_GIGE /* GbE speed/duplex detect */
	94	#define CONFIG_ARP_TIMEOUT 200
	95	#define CONFIG_NET_RETRY_COUNT 50
	96
	97	/* USB 2.0 */
	98	#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
	99
	100	/* USB 3.0 */
	101	#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
	102
	103	#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
	104	CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
	105
	106	/* USB ethernet */
	107	#define CONFIG_USB_HOST_ETHER
	108	#define CONFIG_USB_ETHER_ASIX
	109	#define CONFIG_USB_ETHER_MCS7830
	110	#define CONFIG_USB_ETHER_RTL8152
	111	#define CONFIG_USB_ETHER_SMSC95XX
	112
	113	/*
	114	* SATA/SCSI/AHCI configuration
	115	*/
	116	#define CONFIG_SCSI
	117	#define CONFIG_SCSI_AHCI
	118	#define CONFIG_SCSI_AHCI_PLAT
	119	#define CONFIG_LIBATA
	120	#define CONFIG_LBA48
	121	#define CONFIG_SYS_64BIT_LBA
	122
	123	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
	124	#define CONFIG_SYS_SCSI_MAX_LUN 1
	125	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	126	CONFIG_SYS_SCSI_MAX_LUN)
	127
	128	#define CONFIG_SUPPORT_VFAT
	129
01e62c7f	130	#endif /* _CONFIG_MVEBU_DB_88F3720_H */